Higit Pa Bumuo ng Blog Mag-sign in
How To Do Po
Tuesday, March 28, 2017 Blog Archive
▼ 2017 (1)
How To Enable LAN Port on PLDT Fibr Modem Po?
▼ March (1)
1. Make sure you're connected to the network via wifi or LAN (use LAN Port #1). How To Enable LAN Port
2. Open your browser and enter 192.168.1.1 in the address bar. on PLDT Fibr Modem
Po?
1. Use username: adminpldt and password: 1234567890
Note: You might be asked to nominate a new password and wifi name, make sure you
write it down for future reference.
4. Click the Network tab then click the Broadband Settings on the left side navigation.
5. Under Lan Binding, make sure to check the LAN 2, LAN 3 and LAN 4 check boxes.
6. Click the Apply button in the buttom of the page to save the changes.
Posted by Author at 7:53 PM
Labels: Enable, Fiber, LAN, Model, PLDT
24 comments:
Ley Stardust August 4, 2017 at 5:37 AM
Hi, this did not work for me, well.. it technically did, since the UN and PW wasn't that.. it was
username: admin
password: 1234
for me. Anyway, my problem is, when I click the Network tab, There aren't any options to
choose. Broadband settings and Lan Binding wasn't in the list. The only tab available was
WLAN Settings. Can you assist me with this one?
Reply
Replies
writer August 4, 2017 at 7:36 AM
"admin" as username is not the administrator account of your router. That's why
the options you can see are limited. What's the model of your wifi router?
kaiencross August 19, 2017 at 7:31 PM
help me too AN5506-04-FA cant enter the said password user just the limited
function admin 1234 account
Oninzke TeraScum September 11, 2017 at 10:41 PM
@kaiencross
Same problem with me, I can't find any broadband settings :( How to fix this?
Gerard Castro September 20, 2017 at 9:25 PM
Hindi po gumagana yung username at password na naka indicate above.
Heeeelp. :(
Unknown user December 11, 2017 at 5:50 PM
step 1. log in
username admin
pass 1234
step 2. Copy paste this to your browser
"http://192.168.1.1/internet/wan_sfu.asp"
step 3. in the LAN Binding, Check the boxes...
LAN 2, LAN 3 AND LAN 4
step 4. click "Apply" at the very bottom of the page
hope this helps :)
Unknown December 19, 2017 at 8:09 PM
Thanks Unknown user... gumana.. hehehe
JM Alovera January 13, 2018 at 5:46 PM
wow! Thanks! I don't know pero before I tried using the adminpldt account pero
kahit naka check na yung settings ndi sya nag take effect..pero dito sa admin
lang..then paste URL gumana sya. slamat!
Unknown May 12, 2018 at 6:09 AM
Access Error: Site or Page Not Found.. hindi nagana yung
http://192.168.1.1/internet/wan_sfu.asp
Reply
Nigel Wood September 19, 2017 at 5:51 AM
With a recent update to PLDT FIBR units, you need to disconnect the fibre connector
(carefully and remember the direction of the plug), and reboot your router before you can
access 192.168.1.1
Reply
Unknown October 7, 2017 at 1:54 AM
help d gumana ung user and password
Reply
Angelo Palma November 15, 2017 at 5:51 AM
Sir try this depende po sa version.
For Software version RP2611
login your admin account
once login right-click anywhere on the page then select "Inspect"
go to "Sources" tab and find menu_pldt.asp then select, it is under loginPage(menu_pldt.asp)
right click line number 29 to add breakpoint
Reload the page
then go to "Console" tab and type curUserType=2 then hit enter
Last Step go to "Sources" tab and click play(resume)/pause button.
For software 2608
Login using 'admin' as your username and 1234 as your password (default).
Right-click anywhere on the screen, then click 'Inspect'.
Go to 'Sources' tab and click number 32 to add breakpoint.
Reload the page.
Go to 'Console' tab and type in curUsertype=2, then hit enter.
Go to 'Sources' tab and click play(resume)/pause button.
You will have access to 'adminpldt' account permissions.
Sana may matulungan. :)
Reply
Replies
Jane Crumb November 16, 2017 at 4:44 AM
SALAMAAAAAAAAAAAAAAAT!!!!
Unknown November 20, 2017 at 4:16 AM
malaking tulong po sana ito, kaso hindi ako na route sa adminpldt account
permissions :(( please help
Joseph Madrid March 28, 2018 at 4:54 AM
how about for version RP2616? tnx
Unknown May 27, 2018 at 8:51 AM
Sir sa 2613 meron?
Reply
Reigel Gallarde December 16, 2017 at 10:06 PM
https://gist.github.com/kbeflo/de3b1610b1879f8e92966ba106f83f97
Reply
Unknown January 26, 2018 at 2:43 AM
THHHHAAANNNNNKKKKKSSSSSS!
Reply
Joseph Madrid March 28, 2018 at 4:55 AM
How about for Version RP2616? tnx
Reply
myMarlo Cahate April 6, 2018 at 12:07 AM
Hello! I cant access full admin rights even though im logged-in as Administrator. The software
version of our router is RP2647 Model AN5506-04-F. Any help po is appreciated.
Reply
Unknown April 24, 2018 at 6:10 AM
I can't still use my LAN 2. While my LAN 1 works.
Reply
Darwin Sumague April 24, 2018 at 11:17 PM
me 2
Reply
Mark Davit Misa May 26, 2018 at 4:13 PM
http://192.168.1.1/internet/wan_sfu.asp
whooooo thanks...
Reply
Ian Canieso May 27, 2018 at 8:52 AM
Sa 2613 sir anong line mag add ng breakpoint
Reply
Enter your comment...
Comment as: Google Account
Publish Preview
Home
Subscribe to: Post Comments (Atom)
Awesome Inc. theme. Powered by Blogger.
