Scribd
Upload
135 views1 page

PW

This certificate of analysis summarizes the test results for a lot of AquaPur purified water that meets USP/EP specifications. Lot #666175 was manufactured in April 2014 and tested to ensure it met standards for various parameters like conductivity, total organic carbon, microbial contamination, and heavy metals. All test results passed specifications. The document was reviewed and approved by the Manager of Quality and Technical Services in April 2014.

Uploaded by

rachelsantoso5259
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
135 views1 page

PW

This certificate of analysis summarizes the test results for a lot of AquaPur purified water that meets USP/EP specifications. Lot #666175 was manufactured in April 2014 and tested to ensure it met standards for various parameters like conductivity, total organic carbon, microbial contamination, and heavy metals. All test results passed specifications. The document was reviewed and approved by the Manager of Quality and Technical Services in April 2014.

Uploaded by

rachelsantoso5259
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PURIFIED WATER

Meets USP/EP Specifications

Certificate of Analysis
Product: AquaPur, Purified Water, meets USP/EP specifications
Decon Part#s: #9301 (1 gallon), #9305 (5 Gallon), #9355 (55Gallon)
Lot # 666175 with an expiration date of April 2016 has been
Manufactured in April 2014 and tested within the following parameters.

Test Specification Result


USP Water Conductivity* USP <645> ≤ 1.3 umhos/cm * Pass
USP Total Organic Carbon USP <643>, EP ≤ 0.50 ppm Pass
Oxidizable Substances USP, EP Meets Requirements Pass
Microbial Contamination USP/EP Harmonized ≤ 100 cfu/mL Pass
Water Conductivity* EP Meets Requirements* Pass
Acidity or alkalinity EP Passes test Pass
Ammonium EP ≤ 0.2 ppm Pass
Calcium and Magnesium EP Passes test Pass
Chlorides EP Passes test Pass
Heavy metals EP Meets Requirements Pass
Nitrates EP ≤ 0.2 ppm Pass
Residue on Evaporation EP ≤ 0.001% Pass
Sulphates EP Passes test Pass

* At the time of manufacturing

Reviewed and Approved by: Date: April 2014

Charlotte Veloski
Manager, Quality and Technical Services
AquaPur Template revised 3/27/2014: Addition of EP specifications

BSE/TSE Statement: There are no materials of animal origin in the raw materials or in the process aides
used to manufacture any Decon products.

Not for Parenteral use, not for injection, wound irrigation or infusion,
not for dialysis.

460 Glennie Circle • King of Prussia, PA 19406 • (610) 755-0800 • Fax (610) 270-8905

You might also like