AC/DC Power Modules

TMP Series, 7 to 30 Watt

Features
CB
Scheme UL 60950-1

◆ Ultra compact, low profile plastic case

◆ Single-, dual- and triple output models
◆ 2 package versions:
- Screw terminal block for chassis mount
- Solder pins for direct PCB mount
◆ DIN-rail mount adaptor (optional)
◆ Universal input 85-264VAC, 50/60Hz
◆ Protection class ll
◆ IEC/EN/UL 60950-1 Approval, CB-Report
◆ Short circuit and overload protection
◆ 3-year product warranty

The TMP series AC/DC Power Modules is a new range of fully encapsulated power
supplies in an ultra-compact module. They feature easy chassis mounting with screw
terminal block connection or direct PCB mounting with solder pins.
Full compliance with International safety standards for industrial control equipment
qualifies the products for worldwide markets.
These power supplies offer a cost effective solution for many space critical applica-
tions in commercial and industrial electronic equipment.

Single Output Models

Order code Output power Output
PCB-mount Chassis mount max.
with solder pins with screw terminal block
TMP 07103 4.6 W 3.3 VDC/1400 mA
TMP 07105 5.0 VDC/1400 mA
TMP 07112 7W 12 VDC/585 mA
TMP 07115 15 VDC/465 mA
TMP 07124 24 VDC/290 mA
TMP 10103 6.6 W 3.3 VDC/2000 mA
TMP 10105 5.0 VDC/2000 mA
TMP 10112 12 VDC/830 mA
10 W
TMP 10115 15 VDC/665 mA
TMP 10124 24 VDC/415 mA
TMP 15105 TMP 15105C 5 VDC/3000 mA
TMP 15112 TMP 15112C 12 VDC/1250 mA
TMP 15115 TMP 15115C 15 W 15 VDC/1000 mA
TMP 15124 TMP 15124C 24 VDC/625 mA
TMP 15148 TMP 15148C 48 VDC/310 mA
TMP 30105 TMP 30105C 5 VDC/6000 mA
TMP 30112 TMP 30112C 12 VDC/2500 mA
TMP 30115 TMP 30115C 30 W 15 VDC/2000 mA
TMP 30124 TMP 30124C 24 VDC/1250 mA
TMP 30148 TMP 30148C 48 VDC/625 mA

http://www.tracopower.com Page 1 of 9
 AC/DC Power Modules
TMP Series 7 to 30 Watt

Dual- and Triple Output Models

Order code Output Output 1 Output 2 Output 3
PCB-mount chassis mount with power
with solder pins screw terminal block max.
TMP 15212 TMP 15212C +12 VDC/650 mA –12 VDC/650 mA
TMP 15215 TMP 15215C +15 VDC/500 mA –15 VDC/500 mA
TMP 15252 TMP 15252C 15 Watt 5.0 VDC/1500 mA 12 VDC/625 mA
TMP 15512 TMP 15512C 5.0 VDC/2000 mA +12 VDC/200 mA –12 VDC/200 mA
TMP 15515 TMP 15515C 5.0 VDC/2000 mA +15 VDC/150 mA –15 VDC/150 mA
TMP 30212 TMP 30212C +12 VDC/1300 mA –12 VDC/1300 mA
TMP 30215 TMP 30215C +15 VDC/1000 mA –15 VDC/1000 mA
TMP 30252 TMP 30252C 5.0 VDC/3000 mA1) 12 VDC/1250 mA4)
TMP 30512 TMP 30512C 5.0 VDC/3000 mA1) +12 VDC/600 mA5) –12 VDC/600 mA5)
30 Watt
TMP 30515 TMP 30515C 5.0 VDC/3000 mA1) +15 VDC/500 mA6) –15 VDC/500 mA6)
TMP 30522 TMP 30522C 5.0 VDC/3000 mA1) +12 VDC/1000 mA7) –12 VDC/250 mA9)
TMP 30516 TMP 30516C 3.3 VDC/4000 mA2) +5.0 VDC/1500 mA8) +12 VDC/250 mA9)
TMP 30517 TMP 30517C 5 VDC/4500 mA3) +3.3 VDC/1000 mA7) +12 VDC/250 mA9)

Peak current: 1)4500 mA 2)5300 mA 3)6000 mA 4)1800 mA 5)900 mA 6)750 mA 7)1500 mA 8)2000 mA 9)500 mA
Total load not to exceed 30 Watt.

Input Specifications
Input voltage – nominal 115 / 230 VAC
– range 85 – 264 VAC
85 – 370 VDC
Input frequency 47 – 400 Hz
Input current at full load (115 VAC / 230 VAC) 4.6 W model: 110 mA / 75 mA typ
6.6 & 7 W models: 150 mA / 100 mA typ.
10 Watt models: 200 mA / 130 mA typ.
30 watt models: 550 mA / 330 mA typ.
Input current at no load (115 VAC / 230 VAC) 15 mA / 20 mA typ.
Inrush current (< 2ms, cold start at 115 VAC / 230 VAC) 4.6 - 10 W models: 10 A / 20 A
15 W model: 15 A / 30 A
30 W model: 20 A / 40 A
External input fuse required (recommended value) 1.5 A slow blow
Output Specifications
Voltage set accuracy ±2% max.
Regulation – Input variation 1% max.
– Load variation single output models (10–100%): 1% max.
dual output models balanced load (10–100%): 2.5% max.
dual output models unbalanced load (20/100%): 5.0% max.
triple output models main output (10–100%): 1.0% max.
triple output models auxillary outputs (10–100%): 4.0% max.
Minimum load single an dual output models: 10% of rated max. current
triple output models main output: 10% of rated max. current
triple output models auxillary outputs: 20% of rated max. current
(operation at lower load condition will not dam
age these power supplies, how­­ever, they may not
meet all listed specifications)

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com Page 2 of 9
 AC/DC Power Modules
TMP Series 7 to 30 Watt

Output Specifications
Ripple and noise (20MHz bandwidth) 3.3 VDC & 5.0 VDC outputs: 1.8% of Vout [mVpk-pk max]
other outputs: 1.3% of Vout [mVpk-pk max]
Overload protection by current limit 120% – 180% of Inom, fold back, automatic
recovery (long term overload condition may
cause damage to the unit)
Overvoltage protection by Zehner diode (main output only) 120% of Vout typ.
Capacitive load TMP 07– 3.3 VDC & 5.0 VDC models: 2200 µF max.
TMP 07– 12 VDC & 15 VDC models: 1000 µF max.
TMP 07124 model: 680 µF max.
TMP 10103 model: 3900 µF max.
TMP 10105 model: 3300 µF max.
TMP 10– 12 VDC & 15 VDC models: 2200 µF max.
TMP 10– other models: 1000 µF max. (each output)
TMP 15105 model: 3900 µF max.
TMP 15– 12 VDC & 15 VDC models: 2200 µF max.
TMP 15124 model: 1000 µF max.
TMP 15148 model: 680 µF max.
TMP 15– dual output models: 1500 µF max. (each output)
TMP 15– triple output models, 5 VDC output: 2000 µF max.
TMP 15– triple output models, other outputs: 1500 µF max.
TMP 30105 model: 8000 µF max.
TMP 30– 12 VDC & 15 VDC models: 3900 µF max.
TMP 30124 model: 1500 µF max.
TMP 30148 model: 1000 µF max.
TMP 30– dual output models, 5VDC output: 3900 µF max.
TMP 30– dual output models, other outputs: 1500 µF max.
TMP 30– triple output models, 3.3 VDC & 5VDC outputs: 2200 µF max.
TMP 30– triple output models, other outputs: 1500 µF max.
Rise time 200 ms typ.
Hold-up time 20 ms typ.
General Specifications
Temperature ranges – Operating –25 °C to +70 °C
– Storage (non operating) –40 °C to +85 °C
Power derating 3.75 %/K above +50 °C
Temperature coefficient 0.02 %/K
Humidity (non condensing) 95 % rel. H max.
Efficiency 75 % typ.
Switching frequency 100 kHz typ. (fixed)
Isolation voltage – Input/Output 3‘000 VAC
Isolation resistance – Input/Output 100 MOhm (at 500 VDC)

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com Page 3 of 9
 AC/DC Power Modules
TMP Series 7 to 30 Watt

General Specifications
Electromagnetic compatibility (EMC), Emissions EN 55022, level B, FCC Part 15 level B
Electromagnetic compatibility (EMC), Immunity EN 61000-6-2
– Electrostatic discharge ESD EN 61000-4-2 8 kV/4 kV criteria B
– RF field susceptibility EN 61000-4-3 10 V/m criteria A
– Electrical fast transient / burst immunity input EN 61000-4-4 2 kV criteria B
– Electrical fast transient / burst immunity output EN 61000-4-4 2 kV criteria B
– Surge immunity line – neutral EN 61000-4-5, 1 kV criteria B
– Surge immunity output EN 61000-4-5 0.5 kV criteria B
– Immunity to conducted RF disturbances EN 61000-4-6 10 V criteria B
– Mains voltage dips and interruptions EN 61000-4-11 30 % /10 mS, 60 % /100 mS
EMC test certificates www.tracopower.com/products/tmp-emc.pdf
Protection class II to IEC 61140
Safety standards – Information technology equipment IEC/EN 60950-1, UL 60950-1
Safety approvals – CB certificate for IEC 60950-1 www.tracopower.com/products/tmp-cb.pdf
– UL approvals for UL 60950-1 www.ul.com -> certifications -> File: E188913
Reliability /calculated MTBF TMP 07 models: >330‘000 h
(MIL-HDBK-217F, ground benign) TMP 10 models: >300‘000 h
TMP 15 models: >280‘000 h
TMP 30 models: >250‘000 h
Case material plastic resin + fiberglass (UL 94V-0 rated)

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

http://www.tracopower.com Page 4 of 9
 AC/DC Power Modules
TMP Series 7 to 30 Watt

Outline Dimensions

TMP 07 models:

25.4 (1.00)

18.3 (0.72)
Pin-Out
10.16 2.54
(0.40) (0.10)
Pin Single

(0.20)
5.0
4 3 1 AC (N)
2 AC (L)
3 +Vout
45.72 (1.80)

50.80 (2.00)

Bottom view
4 –Vout

2 1
(0.20)
5.0

Pin diameter: 1.0 (0.04)

(0.10)
2.54

20.32 (0.80) 0.5 (0.02) 6.0

(0.24) Weight: 44 g (1.55 oz)

TMP 10 models

Pin-Out
45.0 (1.77)
Pin Single Dual
10.16
(0.40)
10.16
(0.40)
18.0 (0.71)
1 AC (N) AC (N)
2 AC (L) AC (L)
(0.20)
5.0

5 4 3 3 –Vout Vout 2
4 ntc com.1/2
5 +Vout Vout 1
54.0 (2.13)

64.0 (2.52)

Bottom view

(ntc = not to connect)

2 1
(0.20)
5.0

Pin diameter: 1.0 (0.04)

(0.16)
4.0

17.78 (0.70) 22.5 (0.89) 0.5 (0.02) 6.0 Weight: 92 g (3.25 oz)
(0.24)

Dimensions in [mm], ( ) = Inches

Case tolerances: ±0.5 (0.02)
Pin pich tolerance: ±0.25 (0.01)

http://www.tracopower.com Page 5 of 9
 AC/DC Power Modules
TMT Series 10­to 50 Watt

Outline Dimensions

TMP 15 models for PCB mount:

54.0 (2.13)

8.89 11.43 11.43 8.89 18.3 (0.72)

Pin-Out
(0.35) (0.45) (0.45) (0.35)
Pin Single Dual Dual Triple

(0.20)
sym. asym.

5.0
7 6 5 4 3 1 AC (N)
2 AC (L)
19.9 (0.78) 19.9 (0.78)
3 no pin Vout 3
4
62.0 (2.44)

74.0 (2.91)

–Vout Vout 2 –Vout 2 com.2/3

2 x M 3.5
5 no pin com.1/2 +Vout 2 Vout 2
6
40.0 (1.57)

Top view +Vout Vout 1 –Vout 1 –Vout 1

7 no pin +Vout 1 +Vout 1

2 1
(0.24)

Pin diameter: 1.0 (0.04)

(0.20)
6.0

5.0

20.32 (0.80) 27.0 (1.06) 0.5 (0.02) 6.0 Weight: 114 g (4.02 oz)
(0.24)

TMP 15 models for chassis mount: Connection

Pin Single Dual Dual Triple
sym. asym.
54.0 (2.13) 22.3 (0.88) 1 AC (N)
46.0 (1.81) 4.0
(0.16)
4.0
(0.16)
15.0 (0.59)
2 AC (L)
3 not to connect Vout 3
4 –Vout Vout 2 –Vout 2 com.2/3
3 4 5 6 7
5 ntc com.1/2 +Vout 2 Vout 2
4 x ø3.5
6 +Vout Vout 1 –Vout 1 –Vout 1
7 not to connect +Vout 1 +Vout 1
76.0 (2.99)
86.0 (3.39)

96.0 (3.78)

Top view
(ntc = not to connect)

1 2 Weight: 162 g (5.71 oz)

(0.39)
10.0
(0.20)
5.0

Dimensions in [mm], ( ) = Inches

Case tolerances: ±0.5 (0.02)
Pin pich tolerance: ±0.25 (0.01)
Mounting hole tolerance: ±0.25 (0.02)

http://www.tracopower.com Page 6 of 9
 AC/DC Power Modules
TMP Series 7­to 30 Watt

Outline Dimensions

TMP 30 models for PCB mount:

63.5 (2.50)

15.24 12.70 12.70 15.24 20.5 (0.81)

(0.60) (0.50) (0.50) (0.60)

(0.20)
5.0
7 6 5 4 3

81.3 (3.20)

88.9 (3.50)
27.5 (1.08)

Bottom view 2 x M3.5 THD

27.1 (1.07)

2 1
(0.20)
5.0

Pin diameter: 1.0 (0.04)

(0.15)
3.8

5.55 (0.22) 0.5 (0.02) 6.0

(0.24)
Weight: 177 g (6.24 oz)
27.94 (1.10) 27.94 (1.10)

31.75 (1.25)

Pin-Out
Pin Single Dual sym. Dual asym. Triple
1 AC (N)
2 AC (L)
3 +Vout Vout 1 +Vout 2 Vout 2
4 no pin +Vout 1 +Vout 1
5 –Vout com.1/2 –Vout 2 com 2/3
6 no pin –Vout 1 –Vout 1
7 ntc Vout 2 ntc Vout 3

(ntc = not to connect)

Dimensions in [mm], ( ) = Inches

Case tolerances: ±0.5 (0.02)
Pin pich tolerance: ±0.25 (0.01)
Mounting hole tolerance: ±0.25 (0.02)

http://www.tracopower.com Page 7 of 9
 AC/DC Power Modules
TMP Series 7­to 30 Watt

Outline Dimensions

TMP 30 models for chassis mount:

63.8 (2.51) 22.3 (0.88)

50.0 (1.97) 6.9 4.0 15.0 (0.59)

(0.27) (0.16)

3 4 5 6 7

4 x ø3.5
100.0 (3.94)

112.0 (4.41)

92.0 (3.62)
Top view

1 2
(0.39)
10.0
(0.24)
6.0

Weight: 191 g (6.74 oz)

Connection
Pin Single Dual sym. Dual asym. Triple
1 AC (N)
2 AC (L)
3 +Vout Vout 1 +Vout 2 Vout 2
4 not to connect +Vout 1 +Vout 1
5 –Vout com.1/2 –Vout 2 com 2/3
6 not to connect –Vout 1 –Vout 1
7 ntc Vout 2 ntc Vout 3

Dimensions in [mm], ( ) = Inches

Case tolerances: ±0.5 (0.02)
Mounting hole tolerance: ±0.25 (0.02)

http://www.tracopower.com Page 8 of 9
 AC/DC Power Modules
TMP Series 7­to 30 Watt

DIN-Rail Mounting Kit

Adapter for mounting on DIN-rails as per EN 50022-35 (snap-on mounting)

DIN-Rail Mounting Kit

Order code For models
TMP-MK1 TMP 15xxxC
TMP-MK2 TMP 30xxxC

Kit contains interface plate, DIN-rail clip and necessary screws.

Specifications can be changed any time without notice.

Rev. 09/08

Jenatschstrasse 1 · CH-8002 Zürich

Tel. +41 43311 4511 · Fax +41 43311 4545 · info@traco.ch · www.tracopower.com Page 9 of 9