1. Question 40. The Special Character String That Is Used To Print The Diameter Sign Is?
Answer :
%%c
2. Question 41. In Order For The Grid Command To Work Correctly Two Settings Have To Be
Established?
Answer :
Gridmode and osmode both set to 1
3. Question 42. Which One Commands Can Be Used To Turn The Grid Through 45 Degrees ?
Answer :
UCS
4. Question 43. Which One Key Combinations Will Toggle Snap?
Answer :
Either F9 or CONTROL and B
5. Question 44. When Producing A Drawing Of A Site Plan Measuring 300m X 275m Dimensions Should Be
Entered To A Scale Of?
Answer :
1:1000
6. Question 45. The Command To Scale A Paper Space Viewport To Half The Drawn Size Is?
Answer :
Zoom 0.5x
7. Question 46. Which Statements Is True For Autocad?
Answer :
ZOOM ALL makes all objects visible irrespective of the layer visibility state.
8. Question 47. Which One Is The Maximum Number Of Layers Which Can Be Defined In An Autocad
Drawing?
Answer :
256 layers
9. Question 48. Which One Commands Can Be Used To Change The Value Of A System Variable?
Answer :
SETVAR
10. Question 49. If The System Variable Mirrtext Is Set To 1, Text Is?
Answer :
Mirrored
11. Question 50. Which One Commands Forces Autocad To Revise The Entire Drawing Taking Into Account
The Effect Of Changes Within The System?
Answer :
REGEN
12. Question 51. The Shortcuts Or Command Alias That Allows Us To Key In L And Autocad Responds With
Line Are Stored In A File Named
Answer :
ACAD.PGP
13. Question 52. When Designing An Integrated Circuit Measuring 5 Mm X 5mm The Measurements Should
Be Entered Using A Scale Of
Answer :
1:5
14. Question 53. A House Measures 15000 Mm X 8000 Mm In Plan View. When Drawing The Plan View Only
Which One Sets Of Limits Would Be Best To Use?
Answer :
0,0/20000,15000
15. Question 54. Which Commands Will Not Place Some Form Of Text Within The Drawing?
Answer :
STYLE
16. Question 55. The "select Object" Option "previous" Is Best Described By
Answer :
Picks the previously picked group of objects
17. Question 56. The Maximum Number Of Commands Whose Effect Can Be Undone By The Undo
Command Is?
Answer :
all commands issued since the drawing was last loaded into the drawing editor
18. Question 57. The Effect Of The Explode Command When Applied To A Block Is To?
Answer :
reduce a block to it's constituent entities to allow editing
19. Question 58. Which One Is The Autocad Filename Extension Used To Indicate A Compiled Text Font?
Answer :
TXT
20. Question 59. Which One Is A Correct Statement Regarding Autocad Blocks?
Answer :
Blocks can only be inserted into a drawing if they already exist in that drawing.
21. Question 60. The Effect Of Freezing A Layer Is To?
Answer :
make it invisible and prevent regeneration
22. Question 61. Causes Attributes To Be Set To Their Defaults?
Answer :
ATTDIA
23. Question 62. Autocad Has Had The Dreaded Model Space And Paper Space Since R12. What Is The Main
Advantage Of The System?
Answer :
it converts 2D drawings to 3D
24. Question 63. One Effect Of Setting The Value Of Mirrtext=0 Is That?
Answer :
text is displayed but not mirrored
25. Question 64. Which Statements Is True?
Answer :
When a drawing is saved, a DWG file is created and an existing DWG file of the existing name and location is
renamed with the extension .bak. A backup file is one save older than the drawing file of the same name. To
ensure that your BAK files are the same as the DWG file, always save twice.
26. Question 65. Which System Variables Controls The Accuracy Of Approximation Of A Spline Curve?
Answer :
SPLINE
