Scribd
Upload
357 views10 pages

Bar Estimate

This document provides specifications for bar reinforcement lengths, diameters, quantities, and bend allowances for two footing designs: F1 and SF1. For F1, the bar diameter is 16mm with an order length of 11m and quantity of 20 bars. For SF1, the bar diameter is 12mm with an order length of 6m and quantity of 3 bars. The document also provides specifications for main reinforcement and stirrup bar lengths, diameters, and bend allowances.

Uploaded by

Karl Monfort
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
357 views10 pages

Bar Estimate

This document provides specifications for bar reinforcement lengths, diameters, quantities, and bend allowances for two footing designs: F1 and SF1. For F1, the bar diameter is 16mm with an order length of 11m and quantity of 20 bars. For SF1, the bar diameter is 12mm with an order length of 6m and quantity of 3 bars. The document also provides specifications for main reinforcement and stirrup bar lengths, diameters, and bend allowances.

Uploaded by

Karl Monfort
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Mild Yield Steel Minimum Hook and Bend Allowance

High Yield Steel Minimum Hook and Bend Allowance

Bar Lengths 5,6,7.5,9,10.5,12,13.5

FOOTING F1
Bar Diameter 16 mm Order Length 11
L1 1.2 M Qty. per Order Length 7.096774194
CC 75 Excess Length/Order 0.15
Bend 90° Hook Round Down Total Excess 3
LEFT & RIGHT? YES Excess Rounded Up for 0
L1 - CC + Hook & Bend 1.55 M Order
Spacing
Quantity/L1+H&B 140 pcs
Order Length QTY. 20 pcs of 16 mm at 11 M Length

FOOTING SF1
Bar Diameter 12 mm Order Length 6
L1 0.9 M Qty. per Order Length 5.217391304
CC 75 Excess Length 0.25
Bend 90° Hook Round Down Total Excess 0.5
LEFT & RIGHT? YES Excess Rounded Up for 3.7
L1 - CC + Hook & Bend 1.15 M Order
Spacing
Quantity/L1+H&B 12 pcs
Order Length QTY. 3 pcs of 12 mm at 6 M Length
If Lapsplice is not Indicated for 1-4 storey Bldg.

M
pcs
M
M
M

M
pcs
M
M
M
Main Reinforcement
Length
5 180° Hook 90° Hook
Diameter
6 A or G (mm) A or G (mm)
9 8 100 130
10.5 10 150 150
11 12 180 200
12 16 200 250
13.5 20 250 380
25 280 430
28 380 480
32 430 550
36 480 630
40 680 730
60 850 900
20
250
Stirrups

135° Hook Angle 180° Hook


Diameter H Approx (mm)
A or G (mm) LEFT & RIGHT? YES
10 110 80
12 120 80
16 140 95
20 230 135
25 270 155
90° Hook 135° Hook 90° Hook COL or BM
NO

You might also like