Thermostatic Valves
Three-Way Thermostatic Valve
Type 1010
Selection
These Thermostatic Valves utilize the principle of expand-
ing wax, which in the semi-liquid state undergoes large
expansionrates within a relatively narrow temperature
range. The self-contained element activates a stainless
steel sleeve, which directs flow. All Thermostatic Valves
are factory set at predetermined temperatures: no fur-
ther adjustments are necessary. A wide range of
temperatures are available for water and oil tempera-
ture control applications.
Application
When used in a diverting application, on start-up the total
fluid flow is routed back to the main system. As fluid
temperature rises to the control range, some fluid is
diverted to the cooling system. As fluid temperature
continues to increase, more flow is diverted. When the Specification
thermostat is in a fully stroked condition, all fluid flow is
directed to the cooling system. These Thermostatic The standard thermostatic valve housings are made from
Valves may also be used in a mixing application. aluminum and grey iron castings, however, ductile iron,
bronze, steel and stainless steel housings are available.
In a mixing application, hot fluid enters the “B” port and
colder fluid enters the “C” port. The flows mix and the Optional 1010 features: High over temperature element,
thermostat adjusts to reach the desired temperature, plated element. Other options available upon request.
exiting the “A” port.
Features and Benefits
• Wide Range of Temperatures • Rugged Construction
• Heavy Duty • Tamper-Proof
• Self-Contained • Operate in any position
• Replaceable Element • Available for Refrigeration Service
• Non-Adjustable
Application Charts
A C
Engine Engine
Sump Cooler Sump Control Cooler
or B or
B Control Valve
Valve Heat Heat
Exchanger Exchanger
A C
Oil Oil
Pump Pump
Diverting System Mixing System
CONTACT : ASHOK INDUSTRIES – PH-91-2692-231938-MOB-91-9426005559
www.sesco.nl or call +31-10-4849833 B05
Thermostatic Valves
Three-Way Thermostatic Valve
Type 1010
Pressure Ratings
Material Bar
Cast Iron / Aluminum 10.4 Bar
/ Bronze
Ductile 17.3 Bar
All models Steel / Stainless Steel 34.5 Bar
Dimensions and Specifications
Model Pipe Dimensions Weight Kg Weight Kg Weight Kg Weight Kg Weight Kg
Number Size X Y W Z (Aluminum) (Bronze) (Cast Iron) (Ductile Iron) (Steel & SS)
1010 1” NPT 108 51 92 153 1,4 3,9 3,0 3 3,2
1110 3/4” NPT 108 51 92 153 1,4 3,9 3,0 3 3,2
1210 1/2” NPT 108 51 92 153 1,4 3,9 3,0 3 3,2
1010J8 SAE 8 1/2“ 112 56 98 161 1,4 3,9 3,0 3 3,2
1010J12 SAE 12 3/4” 112 56 98 161 1,4 3,9 3,0 3 3,2
1010J16 SAE 16 1” 112 56 98 161 1,4 3,9 3,0 3 3,2
Dimensions in mm.
PART # DESCRIPTION
*1010 VALVE BODY (*See table for material)
Flow vs. Pressure Drop
1/2” 3/4” 1”
*1020 VALVE COVER (*See table for material) 700
1080 GASKET (Older than 1979) 600
Pressure Drop in mbar
1572** O-RING (Standard material is Buna-N)
500
1071 LIP SEAL
1060-Temp THERMOSTAT (Temp to follow dash) 400
1600 HEX BOLT 300
1601 LOCK WASHER 200
1590 NAMEPLATE 100
0
Model 1000* Replacement Kit (Includes the following:)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
1572** O-RING (Standard material is Buna-N) Flow in m3/Hr
1071 LIP SEAL SAE 10 @ 37,7° C
1060-Temp THERMOSTAT (Temp to follow dash) Recommended Pressure Drop is 140 to 480 mbar
(For Viton (V) or Neoprene (E) O-Ring material, replace ** with V or E)
CONTACT
AUTHORISED DEALER:
B06 www.sesco.nl or call +31-10-4849833
