Installed, monitored and maintained instrumentation, process controls, data acquisition
systems and electrical systems Designed and implemented electronic circuits for signal
conditioning, data acquisition and control functions.
Instrumentation and Calibration:
Involved in the functional tests, loop tests, calibration of the field
instruments according to the necessary standards of NEC, API, ISA and
analyzed the failures related to instrumentation systems and components and
recommends corrective actions to prevent re-occurrence.
Documentation:
Technical documents and Data sheets, preparation for all kind of process,
level, flow, pressure and temperature instruments, analyzers, actuators and
control systems (PLC ,DCS , ESD) including selection/sizing, instrument hook up
drawing, cable schedule and termination drawing, instrument loop diagram.
Automation and Control:
Design, configuration, integration and implementation of process control
systems including DCS systems, ESD systems, HMI software, SCADA systems
and industrial PC networking technology.
System sizing, architecture and hardware selection based on customer’s
RFQ, specification, IO summary and control philosophy of system.
Installation materials specification, New DCS cabinet and remote I/O
enclosure design/engineering, Instrument data sheet including selection/sizing,
instrument hook up drawing, cable schedule and termination drawing, instrument
loop diagram.
Developing communication, control philosophy, and cause and effect
documents;
Commissioning activities:
Prepare commissioning plans such as ORT, FAT and RAT plans, control
strategies and control audit reports.
Accomplish factory demonstrated tests for control and electrical panels
and loop checks for control systems.
Low Voltage Electrical System:
Design and creating electrical schematic drawing
Panel Assembling.
VFD Setup and programming.
Test, maintenance and troubleshooting of electrical panels
Produce control schematic drawing and assembling for marshaling and
control panels.
Repaired and maintained of instruments according the manufacturers
specifications.
Performed troubleshoot on PLC control systems.
Identify, evaluate and develop new methods for applying significant new
technologies to support the company's strategic goals.
Instrument and Automation Engineer with over 10 years’ experience in the Design,
Commissioning, Installation and Maintenance in Petrochemical, Oil & Gas, Steel making (DRI)
and Utility Projects. With good skills in Field Instrument, PLC, DCS, SCADA and ESD Systems.
Programming, configuration and commissioning: Process Control System (PCS),
Emergency Shutdown System (ESD) and Power Distributed Control System (PDCS)
System sizing, architecture and hardware selection based on customer’s RFQ, specification, IO summary
and control philosophy of system.
Preparing and collecting of documents required for control system (PLC ,DCS , ESD) such
as control logic configuration, loop drawing, graphic design, and required hardware
Preparation of technical offer for various projects
Supervision of control System Installation
Control System site test including: pre-commissioning, commissioning and startup
Designing, manufacturing, Installation and commissioning Electrical System
Designing, manufacturing, Installation and commissioning control system and SCADA
system
Procurement engineering services: Issuing document like Material requisition (MR),
Technical Bid Evaluation (TBE), Vendor Data Review (VDR), Vendor Data Incorporating (VDI) and
Technical Clarification (TC)
Supporting in creation of Project team, performing technical Kick Of Meetings,
Performing design input review based on customer input, Support to task allocation with
individual time estimates and schedules
Good Team Player as a part of a larger team, working together to make one project
come together successfully and open to new ideas from others
Planning of daily maintenance works
Maintenance and utilizing plant control systems (Field Bus Control System: FCS)
(Yokogawa), ESD System (Emergency Shut Down) (HIMA), PLC Base systems (S7 Siemens)
(Mitsubishi) (PCS7 Siemens)
Identify, evaluate and develop new methods for applying significant new technologies to
support the company's strategic goals.
Manage small capital projects including scope definition, engineering design, cost estimation,
software configuration, preparation of bid packages, preparing the MOC, supervision of
contractors, managing shutdown/startup phase and training operators
Provide engineering support for instrumentation and control systems on larger capital projects
Annual testing and documentation of test results for process and SIS interlocks
Provide technical support for all plant control systems, data acquisition system and maintenance
team objectives
Understands and helps implement the SBU HSES / Responsible Care Policy and related objectives
Aware of potential environmental, health, safety and security impacts in area of responsibility
and the consequences if an upset occurs
