NetOutlook ®

NetOutlook® Network Management Software

SNMP Network Management for the iConverter Multi-Service Platform
®

NetOutlook Network Management Software is a robust and

secure network management application for the iConverter
Multi-Service Platform. NetOutlook provides remote
management of iConverter media converters, Network
Interface Devices (NIDs), T1/E1 and CWDM Multiplexers.
NetOutlook has an intuitive Graphical User Interface (GUI) that
provides the ability to remotely monitor network performance,
configure hardware parameters, provision services, generate
performance reports and perform advanced fault detection.
NetOutlook Standard Edition
NetOutlook is used by Service Providers, Enterprises and
Governments to leverage the full capabilities of the iConverter ■■ Intuitive Graphical User Interface (GUI) provides
multi-service platform: configuration, monitoring and reporting of iConverter
modules and chassis
■■ Lowers operating costs with remote configuration and
provisioning which reduces technician trips to equipment ■■ Real-time trap notification provides network status to
identify specific network problems and their locations
■■ Improves network reliability with performance monitoring,
■■ Supports SNMPv1, SNMPv2c and SNMPv3
fault detection and isolation tools
■■ IP-less management with IEEE 802.3ah and Omnitron’s
■■ Increases end user/subscriber satisfaction with Secure OAM management channels
comprehensive performance monitoring
■■ Comprehensive Port MIB statistics in graphical format
and 802.3ah performance monitoring
■■ Reporting of optical performance statistics for SFP
transceivers equipped on iConverter modules
■■ SNMP Device Discovery utility that automatically detects
iConverter chassis and modules on the network
■■ Copy and Paste or Save and Load module configurations
for rapid chassis configuration and reconfiguration
■■ Print Utility for printing status/configuration information
■■ Free lifetime upgrades and 24/7 Technical Support
iConverter Multi-Service Platform NetOutlook Carrier Ethernet Edition
Management of iConverter chassis and modules is achieved by Includes all functionality of the Standard Edition and adds
adding an iConverter Network Management Module (NMM2) management, provisioning and reporting of iConverter
or a Network Interface Device (NID) with built-in management GM3, GM4 and XM5 NIDs for business services and mobile
to the chassis. An iConverter NID can manage an iConverter backhaul:
chassis of modules, or manage itself as a standalone unit.
■■ Zero-Touch Provisioning
NetOutlook Standard Edition provides configuration, monitoring
and reporting for all iConverter modules and chassis. ■■ RFC 2544 and ITU-T Y.1564 Service Testing
The Standard Edition supports IEEE 802.3ah and IP-less ■■ IEEE 802.1ag Connectivity Fault Management
management when used with iConverter NIDs. ■■ ITU-T Y.1731 Performance Monitoring
NetOutlook Carrier Ethernet Edition supports all the ■■ IEEE 1588v2 Transparent Clock and ITU-T G.8262
functionality of the Standard Edition, and adds advanced Synchronous Ethernet
Service Management functionality for the iConverter GM3,
■■ ITU-T G.8031 and G.8032 Protection Switching
GM4 and XM5 NIDs.
■■ LAG with LACP - 1+1 and 1:1
STANDARD EDITION CARRIER ETHERNET EDITION
NetOutlook is a powerful Graphical User Interface (GUI) that NetOutlook Carrier Ethernet Edition adds the ability to manage,
serves as a single integrated point of access to the entire suite provision and monitor Carrier Ethernet mobile backhaul and
of iConverter products. Chassis and module functionality business services. NetOutlook Carrier Ethernet Edition
is accessible through NetOutlook including configuration, supports all features in the Standard Edition.
troubleshooting, maintenance and performance monitoring. Provisioning of Service Parameters
IP-Less Management The NetOutlook Carrier Ethernet Edition supports remote
Omnitron’s secure IP-Less remote management channel provisioning of Ethernet Virtual Connections (EVCs), including
allows management of a large number of modules and chassis 802.1ad Provider Bridge VLAN stacking (Q-in-Q) for service
through one IP address. It also provides an added level of multiplexing, Class of Service (CoS), granular rate-limiting,
security for the management channel that is not affected by per-flow service mapping and traffic policing and shaping with
end-user actions or traffic on the system. The IP address is Hierarchical Rate Limiting.
isolated to a physically secure management station at the
Service Testing and Validation
network core, and does not exist on the fiber link or on the
Network Interface Device at the network edge. When used with the GM4 NID, the Carrier Ethernet Edition
provisions ITU-T Y.1564 and RFC 2544 service testing to
Fault Notification
rapidly verify the configuration and performance of Ethernet
NetOutlook provides real-time visibility into the operational services prior to customer hand off.
state of iConverter equipment:
ITU-T Y.1731 Performance Monitoring
■■ Hardware/Software Configuration Change
The Carrier Ethernet Edition can be used to monitor and
■■ Security Events generate reports for key SLA parameters, including Frame
■■ Primary/Secondary Link Up/Down Notification Delay, Frame Delay Variation, Frame Loss and Availability.
■■ Dying Gasp Notification IEEE 802.1ag Connectivity Fault Management (CFM)
All monitored events are logged and accessible through IEEE 802.1ag Connectivity Fault Management (CFM)
NetOutlook. proactively monitors service availability and provides tools for
Remote Configuration rapid fault isolation.

NetOutlook allows remote configuration of all product Protection Switching

functionality: The Carrier Ethernet Edition can be used to configure several
■■ VLAN membership assignments protection switching protocols.
■■ Quality of Service (QoS) prioritization, Port Access ITU-T G.8031 and G.8032
Control, Bandwidth Control G.8031 ELPS and G.8032 ERPS provides sub-50ms
■■ Auto-Negotiation and Duplex Modes redundancy fail over.
■■ Link Fault Detection Modes IEEE 802.1ax (802.3ad)
■■ DWDM Wavelength Tuning Link Aggregation with Link Aggregation Control Protocol
(LACP) supporting active/standby and active/active
NetOutlook allows network parameters to be remotely operation.
configured from a single location, providing a convenient and
time-saving solution for large-scale deployments.
ORDERING INFORMATION
Network Monitoring
Model Number Description
NetOutlook provides a graphical display of RMON statistics, NetOutlook Standard Edition for Enterprises and Service
8100-0
including bandwidth utilization and network performance, Providers (Single User License)
link and data receive/transmit status. 802.3ah Performance 8100P-0
NetOutlook Carrier Ethernet Edition for delivering Carrier
Ethernet Business Services (Single User License)
Monitoring provides the detection and notification of link
performance (quality) faults. NetOutlook can also report 8000N-0 SNMP and Telnet Management Module (NMM2)

optical performance statistics from Small Form Pluggable

System Requirements
(SFP) transceivers.
Microsoft compatible PC with Microsoft Windows 2000/2003/
XP/Windows7/8/10 and an Ethernet Network Interface Card.
©2016 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are registered trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications subject to change without notice.

091-18100-001M 5/16

800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 38 Tesla, Irvine, CA 92618

Page 2