Scribd
Upload
51 views1 page

Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia

This document provides instructions for Assignment 5 which involves creating a detail drawing of a hole puncher using ANSI standards. The drawing must include an assembly drawing, exploded drawing with bill of materials, be arranged systematically, and fill out the provided title block. The drawing must be printed to proper scale and saved as a PDF. It also lists the marking criteria and maximum points for items like showing the assembled components clearly, using exploded views, providing dimensions and tolerances, adhering to ANSI standards, systematic arrangement, and filling the title block.

Uploaded by

Azmeer Asry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
51 views1 page

Faculty of Mechanical and Manufacturing Engineering Universiti Tun Hussein Onn Malaysia

This document provides instructions for Assignment 5 which involves creating a detail drawing of a hole puncher using ANSI standards. The drawing must include an assembly drawing, exploded drawing with bill of materials, be arranged systematically, and fill out the provided title block. The drawing must be printed to proper scale and saved as a PDF. It also lists the marking criteria and maximum points for items like showing the assembled components clearly, using exploded views, providing dimensions and tolerances, adhering to ANSI standards, systematic arrangement, and filling the title block.

Uploaded by

Azmeer Asry
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

FACULTY OF MECHANICAL AND MANUFACTURING ENGINEERING

UNIVERSITI TUN HUSSEIN ONN MALAYSIA


BDA 30902, SOLID MODELLING
Assignment 5

Detail drawing

Create a detail drawings of “HOLE PUNCHER” using ANSI standard. The drawing must include

i. Assembly drawing
ii. Exploded drawing with BOM
iii. Arrange the drawing in systematic approach.
iv. Fill all the information required in the provided title block

The drawing must be print out in proper / correct scale and save it in PDF.

Marking criteria.

Evaluate item Marks

i. Show assemble component in 3D drawing with adequate clarity 0.75


ii. Use exploded views with BOM to show assemble of parts 0.75
iii. Provide adequate dimensioning and tolerance to build part properly 1
iv. Adheres to ANSI standard 1
v. Arrange the drawing in systematic approach 0.75
vi. Fill all the information required in the drawing title block 0.75
Total 5

C. K. Sia 2015 Assig 5 BDA30903 SEM1201617

You might also like