SolidWorks Corporation: CSWP Sample Exam
Certified SolidWorks Professional: Solid Modeling Specialist
(CSWP-CORE)
These questions are an example of what to expect in Segment 1 of the CSWP-CORE exam.
How to take this sample exam:
1. To best simulate the conditions of the real test, it is best NOT to print this exam. Since
the Virtual Tester client window runs concurrently with SolidWorks you must switch
back and forth between the two applications. Keeping this document open and consulting
it on your computer while running SolidWorks is the best method to simulate the real test
conditions.
2. The multiple choice answers should serve as a check for you to ensure that your model is
on the right track while completing this exam. If you do not find your answer in the
selections offered then most likely there is something wrong with your model at that
point.
3. Answers to the questions are on the last pages of this sample test document. There are
also hints that can help save time during the exam.
4. If you can complete this exam and get at least 4 out of the 5 questions correctly in 30
minutes or less then you should be ready to take the real CSWP exam.
What you will need for the real CSWP exam:
1. A computer that is running SolidWorks 2008 sp3.1 or higher.
2. The computer must have a connection to the Internet.
3. A double-monitor is recommended but not necessary.
4. If you will be running the Virtual Tester client on a separate computer from the one that
is running SolidWorks, make sure there is a way to transfer files from one computer to
the other. You will be required to download SolidWorks files during the real test to be
able to correctly answer some of the questions.
Sample Exam – Initial Part (These images are to be used to answer Questions #1 – 3)
1. Initial part – Stage 1: Build this part in SolidWorks.
Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: Alloy Steel
Density = 0.0077 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which correspond to the dimensions labeled in the
images:
A = 213 mm
B = 200 mm
C = 170 mm
D = 130 mm
E = 41 mm
F = Hole Wizard Standard: Ansi Metric Counterbore
Type: Hex Bolt – ANSI B18.2.3.5M
Size: M8
Fit: Close
Through Hole Diameter: 15.00 mm
Counterbore Diameter: 30.00 mm
Counterbore Depth: 10.00 mm
End Condition: Through All
X = A/3
Y = B/3 + 10mm
Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.
-Measure the mass of the part.
What is the mass of the part (grams)?
a) 14139.65
b) 14298.56
c) 15118.41
d) 14207.34
2. Update parameters of the initial part.
Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: Alloy Steel
Density = 0.0077 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which correspond to the dimensions labeled in the
images:
A = 225 mm
B = 210 mm
C = 176 mm
D = 137 mm
E = 39 mm
F = Hole Wizard Standard: Ansi Metric Counterbore
Type: Hex Bolt – ANSI B18.2.3.5M
Size: M8
Fit: Close
Through Hole Diameter: 15.00 mm
Counterbore Diameter: 30.00 mm
Counterbore Depth: 10.00 mm
End Condition: Through All
X = A/3
Y = B/3 + 10mm
Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.
-Measure the mass of the part.
What is the mass of the part (grams)?
3. Update parameters of the initial part.
Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: Alloy Steel
Density = 0.0077 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which correspond to the dimensions labeled in the
images:
A = 209 mm
B = 218 mm
C = 169 mm
D = 125 mm
E = 41 mm
F = Hole Wizard Standard: Ansi Metric Counterbore
Type: Hex Bolt – ANSI B18.2.3.5M
Size: M8
Fit: Close
Through Hole Diameter: 15.00 mm
Counterbore Diameter: 30.00 mm
Counterbore Depth: 10.00 mm
End Condition: Through All
X = A/3
Y = B/3 + 10mm
Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.
-Measure the mass of the part.
What is the mass of the part (grams)?
Stage 2: Modify the part using the following dimensions (These images are to be used to
answer Questions #4 and 5)
Note: The changes from the initial part are concentrated in areas AA, BB and CC shown in
the first two images.
4. Stage 2
Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: Alloy Steel
Density = 0.0077 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which correspond to the dimensions labeled in the
images:
A = 221 mm
B = 211 mm
C = 165 mm
D = 121 mm
E = 37 mm
X = A/3
Y = B/3 + 15mm
Note: The equation for Y has changed from the initial part.
Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.
-Measure the mass of the part.
What is the mass of the part (grams)?
a) 13095.40
b) 13206.40
c) 13313.35
d) 13395.79
5. Stage 2 – Update Parameters
Unit system: MMGS (millimeter, gram, second)
Decimal places: 2
Part origin: Arbitrary
Material: Alloy Steel
Density = 0.0077 g/mm^3
All holes through all unless shown otherwise
-Use the following parameters and equations which correspond to the dimensions labeled in the
images:
A = 229 mm
B = 217 mm
C = 163 mm
D = 119 mm
E = 34 mm
X = A/3
Y = B/3 + 15mm
Note: The equation for Y has changed.
Hint #1: The dimensions that are to be linked or updated and are variable will be labeled with
letters. Any dimensions that are simple value changes from one stage to another will be circled in
the images.
Hint #2: To save the most time, make use of linked dimensional values and equations.
-Measure the mass of the part.
What is the mass of the part (grams)?
