TH97/2478 TH09/2479 IATF 0113686

www.eicsemi.com SGS TH07/1033

BYV95A - BYV96E AVALANCHE FAST RECOVERY

RECTIFIER DIODES
PRV : 200 - 1000 Volts
Io : 1.5 Amperes DO-15
FEATURES :
* High current capability
1.00 (25.4)
* High surge current capability 0.142 (3.6) MIN.
* High reliability 0.102 (2.6)

* Low reverse current

* Low forward voltage drop 0.300 (7.6)
0.230 (5.8)
* Fast switching for high efficiency
* Pb / RoHS Free
1.00 (25.4)
MECHANICAL DATA : 0.034 (0.86) MIN.
0.028 (0.71)
* Case : DO-15 Molded plastic
* Epoxy : UL94V-0 rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed Dimensions in inches and ( millimeters )
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Rating at 25 °C ambient temperature unless otherwise specifie.
Single phase, half wave, 50 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.

RATING SYMBOL BYV95A BYV95B BYV95C BYV96D BYV96E UNIT

Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 V
Maximum RMS voltage VRMS 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V
Min. Avalanche Breakdown Voltage @ 100 μA VBR(min. ) 300 500 700 900 1100 V
Maximum Average Forward Rectified Current
IF(AV) 1.5 A
Lead Length 10 mm. ; Ttp = 65 °C
Peak Forward Surge Current , 10 ms single half sine wave
IFSM 35 A
superimposed on rated load
Maximum Forward Voltage at I F = 3.0 Amps. VF 1.6 V
Maximum DC Reverse Current T J = 25 °C IR 5.0 μA
at Rated DC Blocking Voltage T J = 165 °C IR(H) 150 μA
Maximum Reverse Recovery Time ( Note 1 ) Trr 250 300 ns
Typical Thermal Resistance (Note 2) RθJA 50 °C/W
Junction Temperature Range TJ 175 °C
Storage Temperature Range TSTG - 65 to + 175 °C

Notes :
(1) Measured with F = 0.5A, IR = 1.0A, Irr = 0.25A
(2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounte

Page 1 of 2 Rev. 04 : May 11, 2010

 TH97/2478 TH09/2479 IATF 0113686
www.eicsemi.com SGS TH07/1033

RATING AND CHARACTERISTIC CURVES ( BYV95A - BYV96E )

FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM

50 Ω 10 Ω Trr

+ 0.5

D.U.T. 0
+ PULSE
- 0.25
50 Vdc GENERATOR
(approx) ( NOTE 2 )

1Ω OSCILLOSCOPE - 1.0 A
( NOTE 1 )
SET TIME BASE FOR 50/100 ns/cm
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 1
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.

FIG.2 - FORWARD CURRENT DERATING CURVE FIG.3 - MAXIMUM NON-REPETITIVE PEAK

FORWARD SURGE CURRENT
50
AVERAGE FORWARD RECTIFIED

1.5
PEAK FORWARD SURGE
CURRENT, AMPERES

CURRENT, AMPERES

1.2 40

0.9 30

0.6 20

0.3 10

0 0
0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100

TIE-POINT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 50Hz

FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS

FORWARD CURRENT, AMPERES

10 10

TJ = 125 °C
TJ = 100 °C TJ = 25 °C
REVERSE CURRENT,
MICROAMPERES

1.0 1.0

0.1 0.1
TJ = 25 °C
Pulse Width = 300 μs
2% Duty Cycle

0.1 0.01
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0 20 40 60 80 100 120 140

FORWARD VOLTAGE, VOLTS PERCENT OF RATED REVERSE

VOLTAGE, (%)

Page 2 of 2 Rev. 04 : May 11, 2010