Optocoupler Selection Guide
Optocoupler Selection Guide
www.fairchildsemi.com
introduction
Fairchild semiconductor is a leader in the design and production of optocouplers. We offer a broad range of
package platforms and incorporate various combinations of input and output configurations. our offerings include
simple function optocouplers for low bandwidth/general switching applications, high performance optocouplers
for high bandwidth/high gain applications, high voltage optocouplers for Ac load switching applications and
other specific functions that provide unique performance characteristics. the recently introduced 1.0A and 2.5A
igBt/MosFet gate drive optocouplers complement Fairchild’s leading discrete power MosFet products. Fairchild
customers now have a complete offering from the logic control portion of the circuit to the isolated gate driver to the
power MosFet. All of our optocouplers are lead (Pb) free and RoHs compliant. in addition, they are certified by
major safety regulatories.
t meet the increasing demands of today’s designs, Fairchild offers optocouplers capable of withstanding operating
to
temperatures up to +125°c. our Microcoupler™ devices are the only plastic package optocouplers capable of
meeting this elevated temperature limit to allow for improved current transfer Ratio (ctR) stability. our 4-pin full pitch
Mini-Flat package (MFP) and 4-pin diP package, phototransistor output optocouplers are rated with a maximum
operation temperature of +110°c.
Fairchild’s new high performance optocouplers have a superior common mode transient immunity advantage, which
is 30% better than the competition. this improvement has been achieved through optoplanar®, Fairchild’s coplanar
packaging technology, and proprietary shielding of the silicon detector chip. this solution results in a >30% reduction
in capacitance vs. the over-under package construction utilized by the competition. cMR is a measure of the device’s
ability to reject noise.
30
Fairchild
25
Competitor A
dv/dt (kV/µs)
20
15
Competitor B
10
5 Competitor C
0
1000 1200 1400 1600 1800 2000
VCM (V)
2 w ww. f ai r c h i l d se mi .c o m
table of contents
phototransistors ......................................................................................12-18
isolated error amplifiers............................................................................................................................. 12
phototransistor output–dc sensing input ........................................................................................ 13 -15
phototransistor output–ac sensing input ............................................................................................. 16
photodarlington output ..................................................................................................................... 17-18
p
package information............................................................................... 20 - 24
www. f a i rc hi ld s em i . c o m 3
optically isolating high speed interface
Fairchild’s high performance optocouplers have a superior common mode transient immunity advantage (>30% over
competition). With their high speed data rates, these optocouplers are ideal to meet the needs of high speed data
communications. Portable and compact electronic devices require optocouplers that reduce power consumption and
save space. the 3.3V supply voltage specification reduces power consumption by 33%, while the 5-pin MFP and
dual channel 8-pin soP packaging optimize mounting density.
Transceiver Transceiver
Output
Output Driver
PLC or Driver
PLC or Industrial
Industrial PC Controller
PC Controller Receiver
Controller
Controller Input Receiver
Input Control
Control Enable
Enable Circuit
Circuit
Isolating Digital Input/Output Module Isolating FieldBus Interface
Isolating Digital
Isolating Input/Output
Digital Module
Input/Output Module IsolatingDeviceNet,
(Profibus,
FieldBus Interface
CAN, RS485/RS232)
Isolating FieldBus Interface
(Profibus, DeviceNet, CAN, RS485/RS232)
(Profibus, DeviceNet, CAN, RS485/RS232)
Physical
DataPower
Physical Power
Data
Layer
Layer
1/2 P82B96
1/2 P82B96
IC
2
I 2C
Router/
Switch
Data I2 C Data I 2C
Controller Router/ 802.3af Data Data
with I2C Switch PSE Chip
Interface Controller 802.3af
Isolated Bi-Dir I2C Interface
with I2C PSE Chip
Interface Isolated
Isolating Bi-Dir C Interface
Bi-Dir II2C Interface
2
Power Over Ethernet (PoE)
Power Over Ethernet
Isolating Data
Isolating Data Acquisition
Acquisition System
SystemData Acquisition Isolating Universal Serial BusIsolating Universal Serial Bus
Isolating System Isolating Universal Serial Bus
AC
Line EMI Filter
Input +
Transformers
Controller Circuits
IPM M
Sync
PFC Rectifier
+ +
Primary Secondary Output
Side FB Side
Controller Controller
4 w ww. f ai r c h i l d se mi .c o m
high performance optocouplers
VDD1 1 8 VDD2
VI 2 7 NC
-40 to
fod8001 NEW 8-pin soic 25 – – – 0.1 9 40 40 6 40 3750
6 VO
+105
* 3
GND1 4 5 GND2
VF
_
3 6 VO
-40 to
fod260l 8-pin dip 10 5 – – 0.6 10 75 90 25 50 5000
N/C 4 5 GND
+85
+ 1 8 VCC
V
F1
_ 2 7 V01
-40 to
hcpl062n 8-pin soic 10 5 – – 0.6 15 75 90 25 50 2500
_
+85
3 6 V02
V
F2
+ 4 5 GND
-40 to
fod050l N/C 1 8 VCC
8-pin soic 1 – 15 50 0.3 0.2 1000 1000 – 35 2500
+85
+ 2 7 VB
VF
_
3 6 VO
-40 to
fod250l N/C 4 5 GND 8-pin dip 1 – 15 50 0.3 0.2 1000 1000 – 35 5000
+85
FOD050L, FOD250L
+ 1 8 VCC
V
F1
_
2 7 V01
-40 to
fod053l 8-pin soic 1 – 15 50 0.3 0.4 1000 1000 – 35 2500
_
3 6 V02
+85
VF2
+ 4 5 GND
FOD053L
+ 1 8 VCC
V
F1
_ 2 7 V01
-40 to
fod073l 8-pin soic 0.1 – 400* 7000 0.3 3 30 90 – 10 2500
_
3 6 V02
+85
V
F2
+ 4 5 GND
FOD073L
www. f a i rc hi ld s em i . c o m 5
high performance optocouplers
VI 2 7 NC
fod0720 NEW
3 6 VO
8-pin soic 25 – 0.1 9 40 40 8 40 3750 - 40 to +100
*
GND1 4 5 GND2
NC 1 8 VDD
ANODE 2 7 NC
NC 4 5 GND
FOD0708
ANODE 1 1 8 V
CATHODE 1 2 7 V
ANODE 2 4 5 GND
FOD0738
hcpl0611 + 2 7 VE
8-pin soic 10 5 0.6 13 100 100 35 20 3750 -40 to +85
V
F
6n137 _
3 6 VO 8-pin dip 10 5 0.6 13 100 100 35 10 2500 -40 to +85
hcpl2601 N/C 4 5 GND 8-pin dip 10 5 0.6 13 100 100 35 10 2500 -40 to +85
_
3 6 V02
hcpl2630 V
8-pin dip 10 5 0.6 21 100 100 35 10 2500 -40 to +85
F2
+ 4 5 GND
NC 1 8 V CC
ANODE 2 7 VO
fod2200 8-pin dip 2.5 1.6 0.5 6 300 300 – 10 5000 -40 to +85
CATHODE 3 6 VE
NC 4 5 GND
SHIELD
h11n1m 6-pin dip 5 3.2 0.5 10 330 330 – – 4200 -40 to +85
h11l1m 6-pin dip 1 1.6 0.4 5 4000 4000 – – 4200 -40 to +85
6 w ww. f ai r c h i l d se mi .c o m
high performance optocouplers
fodm4522 ANODE 1 6 VCC 5-pin mfp 1 20 50 0.4 0.2 0.8 0.8 15 3750 -40 to +85
5 VO
CATHODE 3 4 GND
fodm4531,2 5-pin mfp 1 20 50 0.4 0.2 0.8 0.8 40 3750 -40 to +85
hcpl0500 8-pin soic 1 7 50 0.4 0.2 1.5 1.5 10 2500 -40 to +85
hcpl0501 8-pin soic 1 19 50 0.4 0.2 0.8 0.8 10 2500 -40 to +85
hcpl04522 N/C 1 8 VCC 8-pin soic 1 19 50 0.4 0.2 0.8 0.8 10 2500 -40 to +85
hcpl04531,2 8-pin soic 1 19 50 0.4 0.2 0.8 0.8 40 2500 -40 to +85
+ 2 7 VB*
6n135 VF 8-pin dip 1 7 50 0.4 0.2 1.5 1.5 10 2500 -55 to +100
_
6n136 3 6 VO 8-pin dip 1 19 50 0.4 0.2 0.8 0.8 10 2500 -55 to +100
hcpl2503 8-pin dip 1 12 – 0.4 0.2 0.8 0.8 10 2500 -55 to +100
N/C 4 5 GND
hcpl4502 8-pin dip 1 19 50 0.4 0.2 0.8 0.8 10 2500 -55 to +100
hcpl4503m 1,2
8-pin dip 1 19 50 0.5 0.2 0.8 0.8 30 5000 -40 to +100
HCPL0500, HCPL0501
*BASE NOT CONNECTED
hcpl0530 FOR HCPL0452, HCPL0453 8-pin soic 1 7 50 0.5 0.4 1.5 1.5 10 2500 -40 to +85
+ 1 8 VCC
hcpl0531 8-pin soic 1 19 50 0.4 0.4 0.8 0.8 10 2500 -40 to +85
V
F1
_
2 7 V01
hcpl05341 8-pin soic 1 19 50 0.4 0.4 0.8 0.8 40 2500 -40 to +85
_
3 6 V02
hcpl2530 V
F2
8-pin dip 1 7 50 0.5 0.4 1.5 1.5 10 2500 -55 to +100
+ 4 5 GND
hcpl2531 8-pin dip 1 19 50 0.5 0.4 0.8 0.8 10 2500 -55 to +100
HCPL0530/HCPL0531/HCPL0534
hcpl0700 8-pin soic 0.1 300 2600 0.4 1.5 10 35 10 2500 -40 to +85
N/C 1 8 VCC
hcpl0701 8-pin soic 0.1 500 2600 0.4 1.5 10 35 10 2500 -40 to +85
+ 2 7 VB
6n138 VF
8-pin dip 0.1 300 – 0.4 1.5 10 35 10 2500 -40 to +85
_
3 6 VO
HCPL0700 / HCPL0701
hcpl0730 8-pin soic 0.1 300 5000 0.4 3 20 35 10 2500 -40 to +85
+ 1 8 VCC
hcpl0731 V
8-pin soic 0.1 500 5000 0.4 3 20 35 10 2500 -40 to +85
F1
_ 2 7 V01
hcpl2730 8-pin dip 0.1 300 – 0.4 3 20 35 10 2500 -40 to +85
_
3 6 V02
V
F2
hcpl2731 + 4 5 GND
8-pin dip 0.1 500 – 0.4 3 20 35 10 2500 -40 to +85
HCPL0730 / HCPL0731
1
Recommended for IPM Driver
2
Base not connected
www. f a i rc hi ld s em i . c o m 7
high performance optocouplers Control
Input
A new addition to Fairchild’s broad optocoupler portfolio, these igBt/MosFet gate Isolatingdrive optocouplers
IGBT Drive complement
Fairchild’s strong well-established offering in the discrete power igBt/MosFet line of products. Fairchild now offers
customers one-stop shopping from the logic control portion of the circuit to the isolated gate driver to the power
igBt/MosFet. this combined solution converts the mW to kW providing electrical isolation between the primary
Control
and secondary circuits. Input
Control
Input
Control
Input
Isolating
Isolating Power
Power Transistor
Transistor DriveDrive
Control
Input
OpticallyOptically
Isolating 3-Phase Motor Drive
Isolating 3-Phase Motor Drive
Isolating Isolating Power MOSFET
Power MOSFET Drive Drive
Isolating Power MOSFET Drive
-40
0.5 @ Vo=Vcc 0.5 @ Vo=Vee Vcc Vee 10 @
fod3181 20 6 500 – – – 5000 to
-1V +1V -0.5 +0.5 1500
100
* Typical value
8 w ww. f ai r c h i l d se mi .c o m
high performance optocouplers
AC 1 8 VCC
DC+ 2 7 NC
8-Pin DIP
1 8 VCC
N/C 2 7 AUX
Equivalent Circuit
8-Pin DIP
www. f a i rc hi ld s em i . c o m 9
triac driVer optocouplers
Fairchild semiconductor is a market leader for optically isolated tRiAc drivers. our diverse portfolio includes
packages ranging from the Mini Flat Package for compact applications to the 6-pin diP package with wide lead
spacing options for applications requiring greater isolation distances. Performance ranges from basic monolithic
devices for low cost applications to high performance snubberless devices for applications requiring high
dv/dt immunity and low power consumption. Fairchild offers both zero crossing and random phase output
switching configurations.
Discrete
Power
TRIAC AC AC Load
Logic Outputs (Relay, Valve,
Control Solenoid, Lamp,
Circuitry Transformer,
Moto, etc.)
Isolating ACACLoad
Isolating Control
Load Control
moc3020m ANODE 1 6
MAIN 400 30 3 – 100 100 4200 -40 to + 85
TERMINAL
fod4216 NEW 600 1.3 3 10000 200 100 5000 -55 to + 100
fod4218 NEW 800 1.3 3 10000 200 100 5000 -55 to + 100
10 w ww. f ai r c h i l d se mi .c o m
triac driVer optocouplers
fodm3083 4-Pin, Full Pitch MFP 800 5 3 600 300 20 500 3750 -40 to +110
moc3063m ZERO MAIN 600 5 3 600 500 20 500 4200 -40 to +85
N/C 3 CROSSING 4
TERMINAL
CIRCUIT
fod4116 NEW 600 1.3 3 10000 200 25 100 5000 -55 to +100
fod4118 NEW 800 1.3 3 10000 200 25 100 5000 -55 to +100
www. f a i rc hi ld s em i . c o m 11
phototransistors
fod2712 1.0 1.240 1.221 1.259 100 200 70 2500 -40 to +85
NC 1 8 LED
fod2742a C 2 7 FB 0.5 2.495 2.482 2.508 100 200 70 2500 -25 to +85
E 3 6 COMP
fod2742b 1.0 2.495 2.470 2.520 100 200 70 2500 -25 to +85
NC 4 5 GND
fod2742c 8-Pin SOIC 2.0 2.495 2.450 2.550 100 200 70 2500 -25 to +85
fod2711 1.0 1.240 1.221 1.259 100 200 70 5000 -40 to +85
fod2741a 0.5 2.495 2.482 2.508 100 200 70 5000 -25 to +85
NC 1 8 LED
fod2741b C 2 7 FB
1.0 2.495 2.470 2.520 100 200 70 5000 -25 to +85
E 3 6 COMP
fod2741c 2.0 2.495 2.450 2.550 100 200 70 5000 -25 to +85
NC 4 5 GND
fod2743a 0.5 2.495 2.482 2.508 50 100 70 5000 -25 to +85
8-Pin DIP
fod2743b 1.0 2.495 2.470 2.520 50 100 70 5000 -25 to +85
12 w ww. f ai r c h i l d se mi .c o m
phototransistors
-55 to
fod817* 4-pin dip 50 600 70 – 6 – – 5000
+110
-40 to
fodb100 4-pin bga 100 – 75 – 7 3 5 2500
+125
-40 to
fodb101 4-pin bga 100 200 75 – 7 3 5 2500
+125
-40 to
fodb102 4-pin bga 150 300 75 – 7 3 5 2500
+125
ANODE 1 4 COLLECTOR 4-pin -55 to
hmha2801* 80 600 80 – 7 – – 2500
half-pitch mfp +100
CATHODE 2 3 EMITTER 4-pin -55 to
hmha281 50 600 80 – 7 – – 2500
half-pitch mfp +100
4-pin -40 to
fodm121* 50 600 80 – 7 – – 3750
full-pitch mfp +110
4-pin -40 to
fodm124 100 1200 80 – 7 – – 3750
full-pitch mfp +110
4-pin -40 to
fodm2701* 50 300 40 – 7 – – 3750
full-pitch mfp +110
-55 to
mct4 4-pin to--18 15 – 30 – 7 – – 1000
+125
–55 to
mct4r 4-pin to-18
-18 15 – 30 – 7 – – 1000
+125
* CTR option available
www. f a i rc hi ld s em i . c o m 13
phototransistors
h11aV1
a m
aV1 100 300 70 70 7 15* 15* 4200 -40 to +100
1 6
h11aV2
a m
aV2 50 – 70 70 7 15* 15* 4200 -40 to +100
* Maximum value
14 w ww. f ai r c h i l d se mi .c o m
phototransistors
CATHODE 3 6 COLLECTOR
8-Pin DIP
ANODE 1 1 8 COLLECTOR 1
CATHODE 1 2 7 EMITTER 1
CATHODE 2 4 5 EMITTER 2
8-Pin DIP
www. f a i rc hi ld s em i . c o m 15
phototransistors
1 4 COLLECTOR
ANODE 1 4 COLLECTOR
Equivalent
4-Pin Circuit
Half-Pitch MFP
FODM2705
1 6 BASE
2 5 COLL
fod814 20* 300 70 – 6 4 3 5000 -55 to +105
3 4 EMITTER
4-Pin DIP
6-Pin
FOD8DIP
14
AC IN 1 8 N/C
AC IN 2 7 BASE
N/C 4 5 EMITTER
8-Pin SOIC
* Max. value
16 w ww. f ai r c h i l d se mi .c o m
phototransistors
Photodarlington Output
CTR (%) BVCEO BVCBO BVECO tON tOFF
Product Pin VISO ACRMS TOPR
Min. Min. Min. Typ. Typ.
Number Connections Min. Max. (V) (°C)
(V) (V) (V) (µs) (µs)
ANODE 1 4 COLLECTOR
4-Pin DIP
ANODE 1 4 COLLECTOR
4-Pin DIP
*Max. value
www. f a i rc hi ld s em i . c o m 17
phototransistors
Photodarlington Output
CTR (%) BVCEO BVCBO BVECO tON tOFF
Product Pin VISO ACRMS TOPR
Min. Min. Min. Typ. Typ.
Number Connections Min. Max. (V) (°C)
(V) (V) (V) (µs) (µs)
CATHODE 2 5 COLLECTOR
moc8050m 500 – 80 – 5 8.5 95 5300 -40 to +110
N/C 3 4 EMITTER
CATHODE 2 5 COLLECTOR
h11g2m 500 – 80 80 7 5 100 5300 -40 to +100
N/C 3 4 EMITTER
ANODE 1 8 N/C
CATHODE 2 7 BASE
N/C 4 5 EMITTER
8-Pin SOIC
8-Pin SOIC
18 w ww. f ai r c h i l d se mi .c o m
solid state relay optocouplers
series 190 10
hsr312 2 250 – 4000 -40 to +85
parallel 320 3
ANODE 1 6 DRAIN
series 170 15 300
hsr312l 2 250 4000 -40 to +85
parallel 300 4.25 560
CATHODE 2 5
series 140 27
hsr412 3 400 – 4000 -40 to +85
N/C 3 4 DRAIN
parallel 210 7
CATHODE 2 5
h11f2m – – 30 – 330 – 5300 -55 to +100
OUTPUT
3 4
TERMINAL
h11f3m
6-Pin DIP – – 15 – 470 – 5300 -55 to +100
www. f a i rc hi ld s em i . c o m 19
package information
0.25-0.36
8.13-8.89
6 4
3.28-3.53
5.08 (Max)
2.54-3.81
6.10-6.60
0.38 (Min)
0.20-0.30
(0.86)
0.41-0.51 2.54 Bsc 10.16-10.80
8.13-8.89
6 4
3.28-3.53
5.08 (Max)
2.54-3.81
0.38 (Min)
6.10-6.60
NOTES:
A) NO STANDARD APPLIES TO THIS PACKAGE.
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSION. 6
D) DRAWING FILENAME AND REVISION: MKT-NA06BREV3.
1
20 w ww. f ai r c h i l d se mi .c o m
package information
(10.54)
(7.49)
8.43-9.90
6.10-6.60
2.54 (Bsc)
(0.86)
(0.76)
1 3 0.41-0.50
PIN ONE LAND PATTERN RECOMMENDATION
1.02-1.78
0.76-1.14
NOTES:
0.20-0.30
A) NO STANDARD APPLIES TO THIS PACKAGE.
B) ALL DIMENSIONS ARE IN MILLIMETERS. 6
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
0.16-0.88 MOLD FLASH, AND TIE BAR EXTRUSION. 1
(8.13) D) DRAWING FILENAME AND REVISION : MKT-N06CREV3.
5.08 (Max)
9.40-9.91 3.68-3.94
4 1 0.51 (Min) 1.14-1.78
3.05-3.90
6.35-6.86
PIN ONE
15.0° (Max)
10.16 (Typ)
5 8 (0.78)
0.20-0.40
2.54 Bsc
0.41-0.56
NOTES:
A) NO STANDARD APPLIES TO THIS PACKAGE. 8
B) ALL DIMENSIONS ARE IN MILLIMETERS.
1
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSION. 8
D) DRAWING FILENAME AND REVISION: MKT-N08AREV6.
1
www. f a i rc hi ld s em i . c o m 21
package information
5.08 (Max)
3.68-3.94
0.51 (Min)
9.40-9.91 1.14-1.78
4 1 PIN ONE
3.05-3.90
15.00 (Max)
6.35-6.86
0.20-0.40
7.62 (Typ)
5 8
0.41-0.56
2.54 Bsc (0.78)
NOTES:
A) NO STANDARD APPLIES TO THIS PACKAGE 8
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS, 1
MOLD FLASH, AND TIE BAR EXTRUSION
D)DRAWING FILENAME AND REVISION: MKT-N08GREV6. 8
(10.54)
(7.49)
(0.78)
2.54Bsc 0.41-0.56
5 8
LAND PATTERN RECOMMENDATION
(0.76)
0.20-0.40 NOTES:
A) NO STANDARD APPLIES TO THIS PACKAGE
0.40 (Min) B) ALL DIMENSIONS ARE IN MILLIMETERS.
8
Both Side C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
8.00 (Min) MOLD FLASH, AND TIE BAR EXTRUSION
D)DRAWING FILENAME AND REVISION: MKT-N08HREV6. 1
10.30 (Max)
22 w ww. f ai r c h i l d se mi .c o m
package information
1.52
PIN ONE
R0.15 (Typ)
0°~ 8°
4.40 (Typ)
7.87
4.83
6.30-7.29
C
L
R0.15 (Typ)
0.30-0.89
0.18-0.25
1.19 (Typ)
3 4 2.54
3.91-4.29
2.39 (Max)
1.95-2.11
0-0.20
NOTES:
A) NO STANDARD APPLIES TO THIS PACKAGE
1.09-1.19
B) ALL DIMENSIONS ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSION
2.54 Bsc D) DRAWING FILENAME AND REVSION : MKT-MFP04BREV2.
3 1 2.40 (Max)
PIN ONE
1.95-2.11
0-0.20
1.09-1.19
(7.87)
(4.83)
4.20-4.60
6.30-7.30
C
L
1.27 Bsc
2.54 Bsc
4 5 6 (1.27)
3.90-4.30 (2.54)
R0.15 (Typ)
NOTES:
0°~8° (Typ) A) NO STANDARD APPLIES TO THIS PACKAGE
B) ALL DIMENSIONS ARE IN MILLIMETERS.
R0.15 (Typ)
C) DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH, AND TIE BAR EXTRUSION
0.4-0.8
0.18-0.25 D) DRAWING FILENAME AND REVISION : MKT-MFP05AREV2.
(1.20)
www. f a i rc hi ld s em i . c o m 23
package information
1.52
2 1 R0.15 (Typ)
PIN ONE
0°~8°
7.87
4.83
4.40 (Typ)
6.30-7.29
C
L
R0.15 (Typ)
0.30-0.89 0.18-0.25
1.19 (Typ)
3 4
1.27
2.31-2.69
LAND PATTERN RECOMMENDATION
PIN 1
2.39 (Max)
1.95-2.11
1
0-0.20 NOTES: 0.050 (1.27)
A) NO STANDARD APPLIES TO THIS PACKAGE
B) ALL
0.020DIMENSIONS
(0.51) ARE IN MILLIMETERS.
C) DIMENSIONS ARE EXCLUSIVE OF BURRS, 2
0.012 (0.30)
MOLD FLASH, AND TIE BAR EXTRUSION
0.287 (7.29)
1.27 Bsc D) DRAWING FILENAME AND REVSION : MKT-MFP04AREV2.
0.248 (6.30)
Equivale
0.173 (4.40) 0.106 (2.69) (HMHA
TYP 0.091 (2.31)
R0
.07
NOTES:
R0
.07 A) NO STANDARD APPLIES TO THIS PACKAGE
B) ALL DIMENSIONS ARE IN MILLIMETERS.
8° C) DIMENSIONS DO NOT INCLUDE MOLD
0°
FLASH OR BURRS.
(1.04) D) LANDPATTERN STANDARD:
0.36~0.56 SOIC127P600X175-8M.
DETAIL A
SCALE: 2:1
E) DRAWING FILENAME: MKT-M08EREV4
24 w ww. f ai r c h i l d se mi .c o m
application notes
Application Notes
an-3001 optocoupler input drive circuits
an-3002 low current input circuit ideas
an-3003 applications of non Zero crossing triac drivers featuring the moc3011
an-3004 applications of Zero Voltage crossing optically isolated triac drivers
an-3005 design fundamentals for phototransistor circuits
an-3006 optically isolated phase controlling circuit solution
an-3007 mid400 power line monitor
an-3008 rc snubber networks for thyristor power control and transient suppression
an-3010 using the QVe00033 surface mount phototransistor optical interrupter switch
an-3011 surface mounting technology
t assembly guidelines for fairchild’s microcouplers™ (ball grid array)
www. f a i rc hi ld s em i . c o m 25
glossary of terms
breakdown Voltage bVceo V minimum collector to emitter breakdown voltage with the base open
bVeco V minimum emitter to collector breakdown voltage with the base open
current transfer ratio ctr % ratio of the collector current to the diode forward current (ic/if)
i (off) rms
ma off-state rms input current
i (on) rms
ma on-state rms input current
ih µa holding current
il ma load current
data rate data rate mbps number of physically transferred bits per second over a communication link
operating temperature
t range topr °c ttemperature range for which operating specifications are valid
26 w ww. f ai r c h i l d se mi .c o m
glossary of terms
tr µs or ns time delay between the 10% and 90% point on the rising edge
tf µs or ns time delay between the 10% and 90% point on the falling edge
Vinh V inhibit voltage - voltage above which the output will not trigger on
Viso Vac(rms) isolation voltage rating for a one (1) minute duration
Voltage
Voh V logic high output voltage
www. f a i rc hi ld s em i . c o m 27
for a complete listing of sales representatives and sales offices, visit:
www.fairchildsemi.com/cf/sales_contacts
to receive information on fairchild products, tradeshows, online seminars
and other items, register here for updates:
www.fairchildsemi.com/my_fairchild
for datasheets, application notes, samples and more, please visit: www.fairchildsemi.com
PRODUCTS &
SAMPLES APPLICATIONS DESIGN SUPPORT COMPANY
Trademarks, service marks, and registered trademarks are the property of Fairchild Semiconductor or
their respective owners. For a listing of Fairchild Semiconductor trademarks and related information, please see:
www.fairchildsemi.com/legal
Lit. No. 250001-005 © 2008 Fairchild Semiconductor. All Rights Reserved.
Printed on recycled paper.