Fluke 753 and 754 Calibrators
Calibrate/troubleshoot process control instrumentation
• Calibrate temperature, pressure, voltage, current,
resistance and frequency instruments Recommended software
• Built-in procedures for transmitters, square root
transmitters, pressure and temperature switches Instrumentation
• Simultaneously measure and source management software
• Automatically capture calibration results The Fluke 753 and 754 are compat-
• Document procedures and results to meet ISO ible with Fluke 750SW DPC/TRACK2
9000, EPA, FDA, OSHA and other requirements software and with software from
• Measure/simulate 13 types of thermocouples and Cornerstone, Emerson, Honeywell,
eight RTDs On Time Support, Prime Technolo-
• Store up to 8,000 readings in data logging mode gies, Yokogowa, Intools, Meridium
• Protected against dirt, dust and moisture; and Beamex.
unaffected by vibration For more information, visit
• Includes a USB interface www.fluke.com/software
• Operate in English, French, German, Italian and
Spanish
• One- and two-year calibration cycles and a
three-year warranty (one-year for pressure
modules) Recommended accessories
754: Get HART-ability
The Fluke 754 offers all of the capabilities of the
753, plus the ability to calibrate, maintain and
troubleshoot HART instrumentation. Integrated
HART communication functions permit you to moni-
Fluke 754 tor, control and calibrate HART instrumentation. It 700Pxx 750SW
Pressure Modules DPC/TRACK2 Software
handles fast pulsed instruments such as RTD trans- See page 39
mitters and PLCs responding to pulses within 1 ms.
Pressure
Enabled
753: A complete documenting calibrator
The 753 is a complete multifunction documenting
calibrator and includes a PC interface that lets you load
700PTP-1 C799
procedures, lists and instructions created with software— Pneumatic Field Soft Case
or unload data for printing, archiving, and analysis. The Test Pump See page 56
See page 61
753 can hold a full week of calibrations and procedures.
Fluke 753
Specifications
Functions Measure Sourcing Summary specifications: best case, mid-range,
one year.
DC voltage 0.020 % reading + 0.01 % output +
0.005 % full scale 0.005 % full scale Battery life: Typically over eight hours
Internal battery pack: Li ion 4400 mAh
DC current 0.01 % reading + 0.01 % output +
5 µA 0.003 mA
Battery replacement: Via twist lock fastener
without opening calibrator; no tools required
Resistance 0.05 % reading + 50 mΩ 0.01 % output + 240 mΩ Weight: 1.2 kg (2.7 lb)
Frequency 0 to 50 KHz, ± 0.5 Hz to 0 to 50 KHz, ± 0.1 Hz to Size (HxWxD): 245 mm x 136 mm x 63 mm
1100 Hz 1099.9 Hz (9.6 in x 5.4 in x 2.5 in)
Thermocouples 0.3 °C 0.2 °C
RTDs 0.3 °C 0.1 °C
Pressure To 0.025 % of full scale, per pressure
module specifications
Ordering information
Included accessories Models
Three sets of stackable test leads, three sets of test probes with FLUKE-754 Documenting Process Calibrator-HART
three sets of “extended tooth” alligator clips, two sets of hook FLUKE-753 Documenting Process Calibrator
clips, Li-ion battery pack, battery charger, field soft case, USB
communication cable, getting started guide, instruction manual
on CD, NIST traceable certificate of calibration, DPC/TRACK2
sample software that enables upload and printing of calibration
records. Model Fluke-754 includes HART communication cable.
Software media, instruction manual, USB cable. FLUKE-750SW DPC/TRACK2 Software Check price and availability at
www.fluke.com/wtb
36 Process Calibration Tools For more information, go to www.fluke.com/754
