Scribd
Upload
44 views6 pages

Specification of Components

The document provides specifications for several components: 1) A 10 RPM side shaft DC gear motor suitable for robots and automation with a sturdy construction, 10 RPM speed at 12V, and 50 kg-cm stall torque. 2) A 230mm angle grinder with a 2300W rated input power, 6500 RPM no-load speed, and dimensions of 53.5x31.5x19.5cm. 3) A programming board with an ATmega328 microcontroller, operating voltage of 5V, and recommended input voltage of 7-12V.

Uploaded by

Anonymous UIPBm2xRlV
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
44 views6 pages

Specification of Components

The document provides specifications for several components: 1) A 10 RPM side shaft DC gear motor suitable for robots and automation with a sturdy construction, 10 RPM speed at 12V, and 50 kg-cm stall torque. 2) A 230mm angle grinder with a 2300W rated input power, 6500 RPM no-load speed, and dimensions of 53.5x31.5x19.5cm. 3) A programming board with an ATmega328 microcontroller, operating voltage of 5V, and recommended input voltage of 7-12V.

Uploaded by

Anonymous UIPBm2xRlV
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Specification of components

Dc motor

10 RPM Side Shaft Super Heavy Duty DC Gear Motor is suitable for bigger robots / small automation systems. It has
sturdy construction with large gears. Gear box is built to handle the stall torque produced by the motor. Drive shaft is
supported from both sides with metal bushes. Motor runs smoothly from 4V to 12V and gives 10 RPM at 12V. Motor
has 8mm diameter, 19mm length drive shaft with D shape for excellent coupling.

Table below gives fairly good idea of the motor’s performance in terms of RPM vs voltage at no load and that of stall
torque at different voltages.

Note: This motor will be bit noisy while running.

Specifications

 RPM: 10 at 12V
 Voltage: 4V to 12V
 Stall torque: 50 Kg-cm at stall current of 4.4 Amp.
 Shaft diameter: 8mm
 Shaft length: 25 to 30mm
 Gear assembly: Spur
 Brush type: Carbon
 Motor weight: 480gms
Cutting machine

Power Source: Electricity

Type: Angle Grinder

Variable Speed: No

Rated Input Power: 2300W

Disc Diameter: 230mm

Rated Voltage: 220V-240V

No-Load Speed: 6500r/min

Frequency: 50Hz

Disc(Wheel) Type: Grinding Disc

Dimensions:53.5X31.5X19.5Cm

Weight: 6Kg
Programming board

Microcontroller: ATmega328
Operating Voltage: 5V

Input Voltage (recommended): 7-12V


Input Voltage (limits): 6-20V
Cad model
Battery

Battery Type: SLA (Sealed Lead Acid)


• Voltage: 12 volts
• AH Rating: 7AH
• Meets or Exceeds Original Battery Specifications
• Non-spillable Valve Regulated Lead Acid (V.R.L.A.) Design.
• Advanced absorbed glass mat technology
• Sealed construction for operation in any position except upside down.
• Wide operating temperature range.
• High discharge rates and low self discharge rates.
Vice

Item Weight 6 Kg

Product Dimensions 58.8 x 30 x 23.4 cm

Size 9 Inch

Colour Blue

Included Components Draper 225mm Quick Release Woodworking Bench Vice

You might also like