Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
PHILIPS BY120P G3 1xLED105S/840 WB / Luminaire Data Sheet
Luminous emittance 1:
Luminaire classification according to CIE: 100 Luminous emittance 1:
CIE flux code: 69 94 99 100 100
CoreLine High-bay G3 – superior light quality and lower energy and
maintenance costs Following the successful introduction of the CoreLine High-
bay in 2013, the upgrade to a new generation further improves the total cost of
ownership and provides optionally DALI dimming for even further savings.
Designed as a replacement for HPI 250/400 W luminaires, CoreLine High-bay
G3 offers customers all the benefits of LED lighting – fresh light quality, longer
service lifetime, reduced energy consumption and less maintenance – from a
trusted manufacturer. At the same time, it delivers clear benefits for the installer
too. The luminaire can be installed on the existing grid. Electrical connection is
straightforward: there is no need to open the luminaire for installation or
servicing. And being smaller and lighter than conventional luminaires, it is very
easy to handle.
Page 2
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
PHILIPS BN120C L1200 1xLED38S/840 / Luminaire Data Sheet
Luminous emittance 1:
Luminaire classification according to CIE: 91 Luminous emittance 1:
CIE flux code: 42 72 90 91 100
CoreLine Batten – the clear choice for LED Whether for a new building or
renovation of an existing space, customers want lighting solutions that provide
quality of light and substantial energy and maintenance savings. The new
CoreLine Batten range of LED products can be used to replace traditional
battens with fluorescent lamps. The process of selecting, installing and
maintaining is so easy – it’s a simple switch.
Page 3
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
PHILIPS DN470B 1xLED30S/830 C / Luminaire Data Sheet
Luminous emittance 1:
See our luminaire catalog for an image of the luminaire.
Luminaire classification according to CIE: 100 Luminous emittance 1:
CIE flux code: 75 99 100 100 85
GreenSpace – high-efficiency sustainable LED solution Customers want to
strike the ideal balance between their initial investment and the cost of the
installation during its lifetime. GreenSpace is a cost-efficient and sustainable
downlight that can be used to replace conventional CFL downlights in general
lighting applications. It features the latest LED technology, which enables
extremely low power consumption, while delivering consistent light output,
stable color performance and high color rendering. The product’s long lifetime
makes it a true ‘fit and forget’ solution.
Page 4
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
PHILIPS BY470P 1 xGRN130S/865 HRO GC / Luminaire Data Sheet
Luminous emittance 1:
Luminaire classification according to CIE: 100 Luminous emittance 1:
CIE flux code: 81 97 100 100 100
GentleSpace gen2 – the new standard in industrial high-bay lighting, combining
functionality with design With the introduction of the GentleSpace LED
luminaire in 2011, Philips achieved a breakthrough in high-bay lighting, offering
a huge reduction in power consumption, a long service life and an innovative
design. Now, with GentleSpace gen2, Philips continues to improve even
further: an improved total cost of ownership, even in extreme conditions with
the the GS-2 Xtreme version, which can be used up to +60 °C or 100,000 hrs of
lifetime (L80), both ensured by an integrated over-heat protection. In addition, a
wide variety of options – e.g. optics, coatings, mounting possibilities, cover
materials and suitable for explosive zones 2/22 – are available to ensure an
ideal solution for your application. Additionally, the GentleSpace gen2 can be
equipped for use in a central emergency grid (PSED).
Page 5
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Printing Area / Summary
Height of Room: 6.700 m, Mounting Height: 6.100 m, Light loss factor: 0.80 Values in Lux, Scale 1:483
Surface r [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 508 286 635 0.562
Floor 20 496 295 588 0.595
Ceiling 80 110 79 303 0.721
Walls (5) 50 257 82 38687 /
Workplane:
Height: 0.760 m
Grid: 128 x 128 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.498, Ceiling / Working Plane: 0.216.
Luminaire Parts List
No. Pieces Designation (Correction Factor) F (Luminaire) [lm] F (Lamps) [lm] P [W]
PHILIPS BY120P G3 1xLED105S/840 WB
1 50 10500 10500 85.0
(1.000)
Total: 525000 Total: 525000 4250.0
Specific connected load: 5.55 W/m² = 1.09 W/m²/100 lx (Ground area: 765.88 m²)
Page 6
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Printing Area / Luminaire parts list
50 Pieces PHILIPS BY120P G3 1xLED105S/840 WB
Article No.:
Luminous flux (Luminaire): 10500 lm
Luminous flux (Lamps): 10500 lm
Luminaire Wattage: 85.0 W
Luminaire classification according to CIE: 100
CIE flux code: 69 94 99 100 100
Fitting: 1 x LED105S/840/- (Correction Factor
1.000).
Page 7
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Printing Area / Photometric Results
Total Luminous Flux: 525000 lm
Total Load: 4250.0 W
Light loss factor: 0.80
Boundary Zone: 0.000 m
Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 409 99 508 / /
Floor 396 100 496 20 32
Ceiling 0.01 110 110 80 28
Wall 1 301 119 420 50 67
Wall 2 131 104 234 50 37
Wall 3 85 92 178 50 28
Wall 4 121 111 232 50 37
Wall 5 434 169 603 50 96
Uniformity on the working plane
u0: 0.562 (1:2)
Emin / Emax: 0.450 (1:2)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.498, Ceiling / Working Plane: 0.216.
Specific connected load: 5.55 W/m² = 1.09 W/m²/100 lx (Ground area: 765.88 m²)
Page 8
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Stitching Area / Summary
Height of Room: 6.700 m, Mounting Height: 6.100 m, Light loss factor: 0.80 Values in Lux, Scale 1:748
Surface r [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 325 55 431 0.169
Floor 20 318 64 391 0.200
Ceiling 80 71 31 247 0.433
Walls (4) 50 164 38 12063 /
Workplane:
Height: 0.760 m
Grid: 128 x 128 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.517, Ceiling / Working Plane: 0.218.
Luminaire Parts List
No. Pieces Designation (Correction Factor) F (Luminaire) [lm] F (Lamps) [lm] P [W]
PHILIPS BY120P G3 1xLED105S/840 WB
1 42 10500 10500 85.0
(1.000)
Total: 441000 Total: 441000 3570.0
Specific connected load: 3.58 W/m² = 1.10 W/m²/100 lx (Ground area: 998.37 m²)
Page 9
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Stitching Area / Luminaire parts list
42 Pieces PHILIPS BY120P G3 1xLED105S/840 WB
Article No.:
Luminous flux (Luminaire): 10500 lm
Luminous flux (Lamps): 10500 lm
Luminaire Wattage: 85.0 W
Luminaire classification according to CIE: 100
CIE flux code: 69 94 99 100 100
Fitting: 1 x LED105S/840/- (Correction Factor
1.000).
Page 10
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Stitching Area / Photometric Results
Total Luminous Flux: 441000 lm
Total Load: 3570.0 W
Light loss factor: 0.80
Boundary Zone: 0.000 m
Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 260 64 325 / /
Floor 254 64 318 20 20
Ceiling 0.01 71 71 80 18
Wall 1 95 65 160 50 25
Wall 2 11 46 57 50 9.05
Wall 3 101 65 166 50 26
Wall 4 191 85 276 50 44
Uniformity on the working plane
u0: 0.169 (1:6)
Emin / Emax: 0.127 (1:8)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.517, Ceiling / Working Plane: 0.218.
Specific connected load: 3.58 W/m² = 1.10 W/m²/100 lx (Ground area: 998.37 m²)
Page 11
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Warehouse & Fabric Store / Summary
Height of Room: 6.700 m, Mounting Height: 6.100 m, Light loss factor: 0.80 Values in Lux, Scale 1:312
Surface r [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 164 32 238 0.196
Floor 20 162 37 213 0.229
Ceiling 80 38 19 166 0.498
Walls (4) 50 93 22 16707 /
Workplane:
Height: 0.760 m
Grid: 128 x 128 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.600, Ceiling / Working Plane: 0.228.
Luminaire Parts List
No. Pieces Designation (Correction Factor) F (Luminaire) [lm] F (Lamps) [lm] P [W]
PHILIPS BY120P G3 1xLED105S/840 WB
1 21 10500 10500 85.0
(1.000)
Total: 220500 Total: 220500 1785.0
Specific connected load: 1.81 W/m² = 1.10 W/m²/100 lx (Ground area: 986.02 m²)
Page 12
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Warehouse & Fabric Store / Luminaire parts list
21 Pieces PHILIPS BY120P G3 1xLED105S/840 WB
Article No.:
Luminous flux (Luminaire): 10500 lm
Luminous flux (Lamps): 10500 lm
Luminaire Wattage: 85.0 W
Luminaire classification according to CIE: 100
CIE flux code: 69 94 99 100 100
Fitting: 1 x LED105S/840/- (Correction Factor
1.000).
Page 13
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Warehouse & Fabric Store / Photometric Results
Total Luminous Flux: 220500 lm
Total Load: 1785.0 W
Light loss factor: 0.80
Boundary Zone: 0.000 m
Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 130 34 164 / /
Floor 128 34 162 20 10
Ceiling 0.00 38 38 80 9.56
Wall 1 6.58 29 36 50 5.66
Wall 2 62 39 101 50 16
Wall 3 105 40 145 50 23
Wall 4 58 37 95 50 15
Uniformity on the working plane
u0: 0.196 (1:5)
Emin / Emax: 0.135 (1:7)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.600, Ceiling / Working Plane: 0.228.
Specific connected load: 1.81 W/m² = 1.10 W/m²/100 lx (Ground area: 986.02 m²)
Page 14
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Exposing & Packing Area / Summary
Height of Room: 6.700 m, Mounting Height: 6.100 m, Light loss factor: 0.80 Values in Lux, Scale 1:291
Surface r [%] Eav [lx] Emin [lx] Emax [lx] u0
Workplane / 371 227 605 0.613
Floor 20 361 211 541 0.585
Ceiling 80 116 75 252 0.644
Walls (4) 50 272 88 16668 /
Workplane:
Height: 0.760 m
Grid: 128 x 64 Points
Boundary Zone: 0.000 m
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.787, Ceiling / Working Plane: 0.314.
Luminaire Parts List
No. Pieces Designation (Correction Factor) F (Luminaire) [lm] F (Lamps) [lm] P [W]
PHILIPS BY120P G3 1xLED105S/840 WB
1 24 10500 10500 85.0
(1.000)
Total: 252000 Total: 252000 2040.0
Specific connected load: 5.75 W/m² = 1.55 W/m²/100 lx (Ground area: 355.03 m²)
Page 15
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Exposing & Packing Area / Luminaire parts list
24 Pieces PHILIPS BY120P G3 1xLED105S/840 WB
Article No.:
Luminous flux (Luminaire): 10500 lm
Luminous flux (Lamps): 10500 lm
Luminaire Wattage: 85.0 W
Luminaire classification according to CIE: 100
CIE flux code: 69 94 99 100 100
Fitting: 1 x LED105S/840/- (Correction Factor
1.000).
Page 16
Comet
08.04.2018
Operator
Telephone
Fax
e-Mail
Exposing & Packing Area / Photometric Results
Total Luminous Flux: 252000 lm
Total Load: 2040.0 W
Light loss factor: 0.80
Boundary Zone: 0.000 m
Surface Average illuminances [lx] Reflection factor [%] Average luminance [cd/m²]
direct indirect total
Workplane 264 107 371 / /
Floor 258 103 361 20 23
Ceiling 0.01 116 116 80 30
Wall 1 109 107 217 50 34
Wall 2 110 111 221 50 35
Wall 3 250 97 347 50 55
Wall 4 107 122 229 50 36
Uniformity on the working plane
u0: 0.613 (1:2)
Emin / Emax: 0.376 (1:3)
Illuminance Quotient (according to LG7): Walls / Working Plane: 0.787, Ceiling / Working Plane: 0.314.
Specific connected load: 5.75 W/m² = 1.55 W/m²/100 lx (Ground area: 355.03 m²)
Page 17
