TABLE OF

CONTENTS
WIRE TERMINATION AEROSPACE
Twist-on Wire Connectors..................................................A-6 Stripmaster® Wire Strippers..............................................C-4
WeatherProofTM & UnderGroundTM Wire Connectors....A-9 Custom Stripmaster® Wire Strippers...........................C-7
BUCHANAN Wire Connectors.........................................A-11 Pneumatic Wire Strippers................................................ C-14
SpliceLine® In-Line Wire Connectors..........................A-14
In-Sure® Push-In Wire Connectors...............................A-14
PowerPlug® Luminaire Disconnects...........................A-16
Grounding Products............................................................A-18 TEST & MEASUREMENT
SLK® Disconnect Fuse Kits...............................................A-22
Crimp Terminals & Splices...............................................A-29 Circuit Tracers............................................................................D-3
Terminal Strips...................................................................... A-34 Clamp Meters............................................................................ D-6
BUCHANAN B-TAP® Connectors.................................. A-37 Circuit Analyzers.....................................................................D-11
Multimeters...............................................................................D-13
Specialty Testers.....................................................................D-14
Accessories.................................................................................D-17
TOOLS & SUPPLIES
Fish Tapes & Accessories......................................................B-4
Fishing Poles...............................................................................B-7 DATACOMM/NETWORKS
Wire Pulling Lubricants & Accessories........................B-8
Pulling Supplies...................................................................... B-12 Testers............................................................................................. E-3
Conduit Benders....................................................................B-14 Compression Tools & Connectors................................... E-5
Wire Strippers..........................................................................B-16 Crimp Tools/Die Sets.............................................................. E-7
Pliers.............................................................................................. B-21 Tools.................................................................................................E-8
Miscellaneous Hand Tools............................................... B-24 Modular Plugs..........................................................................E-10
Cable Cutters........................................................................... B-27 Strippers.......................................................................................E-13
Screwdrivers.............................................................................B-29 Splitters........................................................................................ E-14
Industrial Bits & Accessories........................................... B-38 Kits.................................................................................................. E-15
Insulated Hand Tools..........................................................B-40 Fiber Optics............................................................................... E-18
Tool Carriers & Bags............................................................. B-47
Hand Tool Kits.......................................................................... B-51
Cutting & Holemaking Tools.......................................... B-54
Cable Ties...................................................................................B-70
Cable Staples........................................................................... B-76
Wire Markers............................................................................ B-77
Switches..................................................................................... B-78
Heat Shrink...............................................................................B-84
Heat Guns..................................................................................B-89
Lockout/Tagout......................................................................B-90
Safety Signs..............................................................................B-99
Safety Tapes.......................................................................... B-100
THE LINESMAN PLIER WITH
SMART-GRIPTM HANDLE
Page B-21
WIRE TERMINATION

WIRE
TERMINATION
INGENUITY & PERFORMANCE
From the introduction of our first twist-on wire connector in 1924, IDEAL has been the leading force in

wire termination technology. Through ingenuity, proven performance and innovative engineering, IDEAL

continues to lead the electrical industry with products that deliver more than the price paid.

TWIST-ON WIRE CONNECTORS STREETLIGHT KITS

Wire-Nut Wire Connectors...............................................A-6
®
SLK®............................................................................................... A-23
Wing-Nut® Wire Connectors..............................................A-7 BUCHANAN Streetlight Kits........................................... A-27
Twister® Wire Connectors................................................... A-8
WeatherProof & UnderGround Wire Connectors..............A-9
Twister® Al/Cu Wire Connectors................................... A-10
B-CAP® Wire Connectors....................................................A-11 ELECTRICAL TERMINALS, CRIMP
WireTwist®/WingTwist® Wire Connectors.................A-12
AND SCREW CONNECTORS
Ring...............................................................................................A-30
Spade...........................................................................................A-30
PUSH-IN WIRE CONNECTORS Disconnects............................................................................... A-31
Splices.......................................................................................... A-32
SpliceLine® In-Line Wire Connectors..........................A-15
Terminal Strips....................................................................... A-34
In-Sure® Push-In Wire Connectors...............................A-15

LUMINAIRE DISCONNECTS TAP CONNECTORS

B-TAP® Insulation-Piercing Connectors.........................A-37
PowerPlug® Luminaire Disconnects...........................A-17

GROUNDING PRODUCTS
Grounding Pigtails................................................................A-19
Grounding Screws............................................................... A-20

A- 1 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
TAN TWISTER®
WIRE CONNECTOR
Page A-8

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 2
WIRE TERMINATION

TWIST-ON WIRE CONNECTORS...

A DESIGN FOR EVERY APPLICATION.
Wire-Nut® Wire Connectors - The American Classic Since 1928
This American classic is the original connector that started it all. The Wire-Nut® Wire Connector
has five color-coded models that cover a full range of applications from 20 to 6 AWG. The
ribbed shell provides a positive grip and the fixed, square-wire spring provides a secure
connection.

Wing-Nut® Wire Connectors - High-Leverage Wing

For extra leverage and superior torque, the Wing-Nut® Wire Connector provides an easy,
secure grip when connecting a wide range of wires. The specially designed contoured
wings make for extra torque and quick work on any electrical job. Three models cover
from 18 to 6 AWG and include, the Red 452® Wing-Nut® with the widest range of any
wing-styled connector in the industry.

Twister® Wire Connectors - Comfortable, Swept Wing

The industry’s choice for comfort. With three models, the Twister® Wire Connector easily
handles the most common wiring configurations for residential construction projects from
22 to 6 AWG. A patented, expanding square-wire spring helps to ensure a quick, secure
connection. The Twister® Pro Red/Yellow 344® Wire connector has the widest range in
the industry.

B-CAP® Wire Connectors - Low-Profile Fin

The B-CAP® Wire Connector gets you into those hard-to-reach spots comfortably,
especially when you’re retrofitting or updating. The contoured classic fin design
provides a secure grip for extra torque, while the expanding interior spring accepts a
wide range of wire sizes and combinations. Three models cover from 22 through 6 AWG.

B-Twist™ Wire Connectors - Long, Swept Wing, Fast-Start Spring

The All-in-One connector that gets the job done. The B-Twist™ Wire Connector combines all
the features of red and yellow wire connectors in one outstanding design. The rounded “dial-
top” provides fast, fingertip starts that come to torque quickly and the low-profile design fits
easily into electrical boxes. With a super-wide range, the B-Twist™ provides top performance
at a great value.
WeatherProof (Above Grade) / UnderGround (Below Grade) Wire Connectors
Twist-on connectors for underground and wet location installations. Six models cover a
wide range of wire sizes from 22 through 6 AWG. The WeatherProof and UnderGround Wire
Connector line features a 100% non-hardening silicone sealant to provide safe, moisture-free
electrical connections. UL Listed and CSA Certified for damp/wet and direct burial applications.

Twister® Al/Cu Wire Connectors - Al/Cu Connections

The only twist-on connector for aluminum-to-copper connections. The specially formulated
anti-oxidant compound prevents oxidation on aluminum conductors for improved conductivity
and cooler connections. UL Listed and CSA Certified for aluminum-to-copper connections.

A- 3 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
WIRE RANGE CHART
Model: Wire Combinations:
Twister® 2 #22 3 #22 2 #20 3 #20 2 #18 2 #16 3 #16 2 #14 3 #14 2 #12 4 #14 3 #12 4 #12 3 #10 5 #12 4 #10 2 #6

340 Orange
™
MIN. 2 #22 MAX. 3 #12

341  Tan
®
MIN. 3 #22 MAX. 3 #10

344® Red/Yellow Widest range MIN.

2 #18 MAX. 4 #10
IN THE INDUSTRY

342® Gray MIN. 3 #14 MAX. 2 #8 w/ 2 #12

Wire-Nut ®

71B® Gray (300V) MIN. 2 #22 Str. MAX. 2 #16

72B® Blue (300V) MIN. 2 #22 MAX. 3 #16

73B® Orange MIN. 1 #18 w/ 1 #20 MAX. 2 #14

74B® Yellow MIN. 2 #18 MAX. 4 #14 w/1 #18

76B® Red MIN. 2 #14 MAX. 4 #12

Wing-Nut ®

451® Yellow MIN. 2 #18 MAX. 3 #12

Widest range
452® Red IN THE INDUSTRY MIN. 2 #18 MAX. 4 #10

454® Blue MIN. 3 #12 MAX. 1 #6 w/ 2 #8

B-CAP ®

B1 Yellow MIN. 3 #20 MAX. 3 #12

B2 Red MIN. 2 #18 MAX. 5 #12

B4 Blue/Gray MIN. 2 #12 MAX. 2 #6 Stranded

B-Twist TM

BT2™ Red MIN. 2 #18 MAX. 2 #8

WingTwist ®

WT51 Yellow MIN. 2 #18 MAX. 3 #12

WT41 Tan MIN. 2 #20 MAX. 3 #10

WT52 Red MIN. 2 #14 MAX. 5 #12

WT54 Blue MIN. 3 #12 MAX. 2 #6

WireTwist ®

WT1 Gray (300V) MIN. 3 #22 MAX. 2 #16

WT2 Blue (300V) MIN. 3 #20 MAX. 3 #16

WT3 Orange MIN. 2 #18 MAX. 2 #14

WT4 Yellow MIN. 3 #20 MAX. 2 #12

WT6 Red MIN. 2 #14 MAX. 4 #12

WeatherProof
61® Gray/Orange MIN. 2 #20 MAX. 2 #14

62 Gray/Red
®
MIN. 3 #18 MAX. 2 #10 w/1 #14

63 Gray/Dark Blue
® MIN. 3 #14 MAX. 5 #10

UnderGround/MudBug®
60® Gray/Gray MIN. 1 #20 w/ 1 #18 MAX. 1 #10 w/ 2 #12

64 Gray/Dark Blue
®
MIN. 2 #18 Sol. MAX. 3 #10

66 Gray/Dark Blue
™
MIN. 3 #12 MAX. 2 #6 w/ 1 #10

60® Yellow MIN. 1 #20 w/ 1 #18 MAX. 1 #10 w/ 2 #12

2 #22 3 #22 2 #20 3 #20 2 #18 2 #16 3 #16 2 #14 3 #14 2 #12 4 #14 3 #12 4 #12 3 #10 5 #12 4 #10 2 #6

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 4
WIRE TERMINATION

WIRE CONNECTOR APPLICATION GUIDE

s
xe
ls rs rs Bo e
ro to ne c h s ing ag
nt c e
wi
t ign s
A L h es s s t Co
D ete r Op A L S s tem i g ht S s ot
or
NT
I itc cle F an h ts s ta C O D oo l ls R CI a ng Sy ms d L
s ted acle e M
E w t a ig o / e E -G t y e l a t s
SID
S p g e ge B
MM ulti ri co ss ro n
mi ecep -Pha VAC
ht ce ilin an L herm VAC mok ara or cu nter ce nt
Model RE Lig Re Ce C T H S G Do CO M Se I Re Co Illu R 3 H
Twister®
340™ Orange l l l l l l l l l l l l

341® Tan l l l l l l l l l

344® Red/ l l l l l l l l l l l
Yellow
342® Gray l l l l l

Wire-Nut ®

71B® Gray l l l

72B® Blue l l l l l

73B® Orange l l l l l l l

74B® Yellow l l l l l l

76B® Red l l l l l l l l l l

Wing-Nut®
451® Yellow l l l l l l l

452® Red l l l l l l l l l l

454® Blue l l l l l

B-CAP®
B1 Yellow l l l l l l l l

B2 Red l l l l l l l l l l

B4 Blue l l l l l

B-Twist™
BT2™ Red l l l l l l l l l l

WingTwist®
WT51 Yellow l l l l l l l l

WT41 Tan l l l l l l l l l

WT52 Red l l l l l l l l l l

WT54 Blue l l l l l

WireTwist®
WT1 Gray l l l

WT2 Blue l l l l l

WT3 Orange l l l l l l l

WT4 Yellow l l l l l l l

WT6 Red l l l l l l l l l l

s ls ing
ts an ro ht
g ls tle ing tF nt Lig
t i n
n t r o
r O u
h t V e n s g e
r Co ps t ing s n g L ot nt
s s
h m ra m h m i
IA
L Lig rs/Co owe k Lig / S pa ste t/Ga inkl
e
l Pu CIAL e Lig ste ight k ing es Pla nals ump
T p e e P c m S y n r e l R p S y L a r h n g i g P
E N a l t r e o y e p W E a y r P s s i S n
SID sc Fi oo io/D ro rit m -S /
MM nds
c rit erio t/ a es c o
ffi jecti VAC
nd ol td t th cu se awn mp cu t ree ar W roc
RE La Po Ou Pa Ba Se Ba L Su CO La Se Ex St C P Tra E H

WeatherProof
61® Gray/Orange l l l l l l l l

62® Gray/Red l l l l l l l l l

63® Gray/Dk. Blue l l l l l l l l l

UnderGround
60® Gray/Gray l l l l l l l l l l

64® Gray/Dk. Blue l l l l l l l

66™ Gray/Dk. Blue l l

A- 5 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Wire-Nut® Wire Connectors
The American Classic Since 1928
• Fixed square spring for a secure hold
• Refined range to handle all common applications
• Positive grip shell that is perfect to twist-on with fingers
• Excellent for fine stranded wire applications
• UL Listed to 105°C (221°F) LISTED

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
Box of 100 30-071
300V 300V
71B® Gray 22 to 16 AWG ,34mm2 to 1,5mm2 Carton of 1,000 30-171
Min. 2 #22 Str. – Max. 2 #16 Min. 2-,34mm2 Max. 3-1,5mm2
Models 71B®, 72B® Keg of 25,000 30-271
and 73B®
Box of 100 30-072
PLENUM 300V 300V Carton of 1,000 30-172
72B® Blue 22 to 14 AWG ,34mm2 to 2,5mm2
RATED Min. 2 #22 – Max. 3 #16 Min. 2-,34mm2 Max. 3-1,5mm2 Keg of 10,000 30-272
Suitable for Barrel of 85,000 30-872
Air-Handling
Space Box of 100 30-073
600V* 600V* Jar of 300 30-073J
22 to 14 AWG ,34mm2 to 2,5mm2 Carton of 1,000 30-173
73B® Orange
Min. 1 #18 w/1 #20 Min. 1-,75mm2 w/1-,50mm2 Bag of 500 30-273
Max. 2 #14 Max. 4-1,5mm2 w/1-,50mm2 Keg of 10,000 30-673
Barrel of 50,000 30-873
600V* 600V* Box of 100 30-074
18 to 12 AWG ,75mm2 to 4,0mm2 Jar of 175 30-074J
74B® Yellow
Min. 2 #18 Min. 2-,75mm2 Bag of 500 30-274
Max. 4 #14 w/1 #18 Max. 4-2,5mm2 w/1-,75mm2 Keg of 5,000 30-674
600V* 600V* Box of 100 30-076
18 to 6 AWG ,75mm2 to 16,0mm2
76B® Red Jar of 150 30-076J
Min. 2 #14 Min. 2-2,5mm2
Max. 4 #12 Max. 2-4,0mm2 Bag of 250 30-276
*1,000V maximum in fixtures and signs

High-Temp Wire-Nut® Wire Connectors

All of the same features as the Wire-Nut® Wire Connector, plus:
• Black, thermoplastic shell designed to withstand extreme heat build-up
found in high-wattage light fixtures and signs
• UL Listed to 150°C (302°F)
LISTED

Wire Combination Wire Combination Range
Model Color Quantity Part No.
Range (mm)
300V 300V Box of 100 30-3627
22 to 16 AWG ,34mm2 to 1,5mm2 Carton of 1,000 30-151
71B® Black
Min. 2 #22 Str – Max. Min. 2-,34mm2 – Max.
Models 71B®, 72B® 2 #16 2-1,5mm2 Keg of 25,000 30-251
and 73B®
300V Box of 100 30-3628
72B®
PLENUM Black
300V
22 to 14 AWG
,34mm2 to 2,5mm2
RATED Min. 2 #22 – Max. 3 #16
Min. 2-,34mm2 – Max.
3-1,5mm2
Keg of 10,000 30-252
Suitable for
Air-Handling Box of 100 30-3629
Space 600V* 600V*
22 to 14 AWG ,34mm2 to 2,5mm2 Keg of 10,000 30-253
73B ®
Black
Min. 1 #18 w/1 #20 Min. 1-,75mm2 w/1-,50mm2
Max. 2 #14 Max. 4-1,5mm2 w/1-,50mm2 Barrel of 50,000 30-803
600V* Box of 100 30-059
600V*
,34mm2 to 4,0mm2
59B™ Black 22 to 12 AWG
Min. 2-,5mm2 – Max. Keg of 5,000 30-259
Min. 2 #20 – Max. 3 #14
3-2,5mm2
*1,000V maximum in fixtures and signs

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 6
WIRE TERMINATION

Wing-Nut® Wire Connectors

High-Leverage Wing

WIRE TERMINATION
• Contoured wing profile provides extra leverage for superior torque
• Expanding, live-action spring expands to accommodate a wide range
of wire sizes and combinations
• Co-polymer shell expands for smooth, progressive tightening
providing dependable connections
• Removable for repeat usage on same size or larger combinations
• Tough, UL94V-2 flame retardant shell rated at 105°C (221°F) LISTED

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
Box of 100 30-451
600V* 600V* Jar of 225 30-451J
451® Yellow 18 to 10 AWG ,75mm2 to 6,0mm2 Jar of 500 30-651J
Min. 2 #18 – Max. 3 #12 Min. 2-,75mm2 – Max. 3-4,0mm2 Bag of 500 30-651
Barrel of 35,000 30-851
Box of 100 30-452
600V* Jar of 300 30-452J
600V*
18 to 8 AWG
452® Red ,75mm2 to 10,0mm2 Jar of 500 30-652J
Min. 2 #18 – Max. 4 #10
Min. 2-,75mm2 – Max. 4-6,0mm2 Bag of 500 30-652
(Widest range in the Industry!)
Barrel of 25,000 30-852
600V* Box of 25 30-454
600V*
2,5mm2 to 16,0mm2
454 ®
Blue 14 to 6 AWG
Min. 3-4,0mm2 –
Min. 3 #12 – Max. 1 #6 w/2 #8 Bag of 100 30-654
Max. 2-16,0mm2 w/1-4,0mm2
*1,000V maximum in fixtures and signs

Greenie® Grounding Wire Connectors

• Designed for making ground connections and bonding
non-metallic sheathed cable
• Contoured wings for superior leverage
• Live-action, square-wire spring provides quality grounding
connections
• Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F) LISTED

Wire Combination Wire Combination Range

Model Color Quantity Part No.
Range (mm)
2,5mm2 to 6,0mm2 Box of 100 30-092
14 to 10 AWG
92® Green Min. 2-2,5mm2 Jar of 150 30-092J
Min. 2 #14 – Max. 4 #12
Max. 2-4,0mm2 w/1-2,5mm2 Bag of 500 30-292

Greenie Grounding Connector fully meets the intent of the NEC and specifically aids in compliance with the
®

following:
ARTICLE 250: GROUNDING
250-146 Connecting Receptacle Grounding Terminal to Box
250-148 Continuity and Attachment of Equipment Grounding Conductors to Boxes
(B) Grounding continuity
(D) Nonmetallic boxes

See Page A-19 for more IDEAL Grounding Products.

A-7 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Twister® Wire Connectors - Preferred Choice for Residential Jobs
Comfortable Swept Wing
• Swept wings for more comfort, extra leverage, and less effort on large
combinations
• Expanding, live-action spring supports a wide range of common wiring
configurations
• Polypropylene shell expands for smooth, progressive tightening
providing dependable connections
• Hexagonal shape accommodates standard nut driver for easy
installation
WIRE TERMINATION

• Quick take-up on even the toughest combinations, including

solid-to-stranded
• UL Listed to 105°C (221°F) LISTED

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
600V* 600V* Box of 100 30-340
340™ Orange 22 to 10 AWG ,34mm2 to 4,0mm2
Min. 2 #22 – Max. 3 #12 Min. 2-,34mm2 – Max. 3-4,0mm2 Jar of 500 30-640J
Box of 100 30-341
Jar of 400 30-441J
600V* 600V*
Bag of 500 30-641
341® Tan 22 to 8 AWG ,34mm2 to 10,0mm2
Min. 3 #22 – Max. 3 #10 Min. 3-,34mm2 – Max. 3-6,0mm2 Jar of 750 30-341J
Barrel of
30-841
25,000
600V* 600V* Box of 50 30-342
18 to 6 AWG ,75mm2 to 10,0mm2 Bag of 250 30-642
342 ®
Gray
Min. 3 #14 – Max. 2 #8 w/2 Min. 3-2,5mm2 – Max. 2-10,0mm2 Barrel of
#12 w/2-4,0mm2 30-842
15,000
*1,000V maximum in fixtures and signs

Twister® Pro Wire Connectors ®

Cushion-Grip Swept Wing

• SureGrip™ overmolding provides improved leverage,
more torque, and faster connections
• Comfortable swept wings ease hand fatigue
• Expanding square-wire spring provides a secure
connection every time
• Tough, UL 94V-2 flame-retardant shell
rated at 105°C (221°F) LISTED

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
Box of 50 30-144
600V*
600V* Jar of 250 30-244J
22 to 8 AWG
,34mm2 to 10,0mm2
344® Red/Yellow Min. 2 #18 – Max. 4 #10 Jar of 500 30-644J
Min. 2-,75mm2
(Widest range in the
Max. 4,0-6,0mm2
Industry!) Barrel of 20,000 30-944

*1,000V maximum in fixtures and signs

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 8
WIRE TERMINATION

WeatherProof Wire Connectors UnderGround Wire Connectors

Above Grade (Ground) Use Below Grade (Ground) Use

WIRE TERMINATION
• 100% Silicone-based sealant protects against • 100% Silicone-based sealant protects against
moisture and corrosion moisture and corrosion
• UL Listed to 486D for use in damp/wet locations or • UL Listed to 486D for use in damp/wet locations or
above-grade applications direct burial/below-grade applications
• Easy to apply, pre-filled twist-on wire connectors • Easy to apply, pre-filled twist-on wire connectors
• Swept-wing design is built for comfort and efficiency • Expanding, live-action square-wire spring for fast,
secure and long-lasting connections
• Eliminates the need for heat-shrink or excessive
taping • Deep skirt provides superior moisture resistance to
protect connections
• Tough, UL 94V-2
flame-retardant • Tough, UL 94V-2 flame-retardant
shell rated at shell rated at 105°C (221°F)
LISTED LISTED
105°C (221°F)

WeatherProof Wire Connectors

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
600V* 600V* Card of 25 30-1161
61® Gray/Orange 22 to 14 AWG ,34mm2 to 4,0mm2 Jar of 150 30-1261J
Min. 2 #20 - Max. 2 #14 Min. 2-,5mm2 – Max. 2-2,5mm2
­

Carton of 1,000 30-1361

600V* 600V* Card of 20 30-1162
62® Gray/Red 18 to 8 AWG ,75mm2 to 10,0mm2 Jar of 100 30-1262J
Min. 3 #18 - Max. 2 #10 w/1 #14 Min. 2-1,5mm2 Sol. – Max. 2-6,0mm2 Carton of 1,000 30-1362
600V* 600V* Card of 15 30-1163
63® Gray/Dk. Blue 16 to 6 AWG 1,5mm2 to 16,0mm2 Jar of 50 30-1263J
Min. 3 #14 – Max. 5 #10 Min. 3-2,5mm2 Sol. – Max. 5-6,0mm2 Carton of 1,000 30-1363
UnderGround Wire Connectors
Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
600V* 600V* Card of 25 30-1160
20 to 10 AWG ,5mm2 to 6,0mm2
60® Gray/Gray
Min. 1 #20 w/1 #18 Min. 1-,5mm2 w/1,75mm2
Max. 1 #10 w/2 #12 Max. 1-6,0mm2 w/2-4,0mm2 Box of 100 30-1260

600V* 600V*
64® Gray/Dk. Blue 18 to 8 AWG ,75mm2 to 10,0mm2 Box of 50 30-1264
Min. 2 #18 Sol. – Max. 3 #10 Min. 2-,75mm2 Sol. – Max. 3-6,0mm2
600V*
600V*
2,5mm2 to 16,0mm2
66™ Gray/Dk. Blue 14 to 6 AWG Box of 50 30-1066
Min. 3-4,0mm2 Sol. – Max. 2-16,0mm2
Min. 3 #12 – Max. 2 #6 w/1 #10
w/1-6,0mm2

WeatherProof & UnderGround Wire

Connector Combo Packs

Combination Packages
Model Color Quantity Part No.
61®/62® Gray/Orange • Gray/Red WeatherProof Wire Connectors Card of 10 (5 ea.) 30-6162
60®/64® Gray/Blue • Gray/Dk. Blue UnderGround Wire Connectors Card of 10 (5 ea.) 30-6064
*1,000V maximum in fixtures and signs

WARNING: One time use only. Do not reuse connector.

A- 9 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
MudBug® Utility Wire Connectors
• Connects underground gas tracer lines providing superior ®

protection
UTILITY WIRE CONNECTORS UTILITY WIRE CONNECTORS
• Moisture and corrosion resistant, pre-filled with non-
hardening, 100% silicone
UTILITY WIRE CONNECTORS
LISTED
• UL Listed to direct burial test standard 486D up to
600V maximum voltage FILLED WIRE CONNECTORS UNDERGROUND™ WIRE CONNECTORS

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
600V* 600V*
20 to 10 AWG ,5mm2 to 6,0mm2 Carton of
60® Yellow 30-360Y
Min. 1 #20 w/1 #18 – Max. 1 #10 Min. 1-,5mm2 w/1,75mm2 – Max. 1-6,0mm2 1,000
w/2 #12 WEATHERPROOF WIRE CONNECTORS
™
w/2 - 4,0mm 2
FILLED WIRE CONNECTORS

*1,000V maximum in fixtures and signs

WARNING: One time use only. Do not reuse connector.

Twister® Al/Cu Wire Connectors

Al/Cu Connections
• Only aluminum-to-copper twist-on connector specifically designed to
provide a secure connection while preventing aluminum corrosion
• Pre-filled antioxidant compound prevents oxidation of aluminum
conductors
• Patent swept wings and hexagonal head for easy installation by hand or
with standard nut driver
• Live-action, square-wire spring expands and contracts with aluminum wire
• Entry-cap retains corrosion-resistant compound
• Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Wire Connector
• Complies with N.E.C. Section #110-14(b) for aluminum-to-copper also listed as
grounding
connections; UL Listed to 486C and CSA Certified to C22.2 #188 LISTED
equipment

Model Color Wire Combination Ranges Quantity Part No.

1 #10 Al solid w/1 or 2 #10 Cu solid Card of 2 30-065
1 #12 Al w/1 or 2 #14 Cu
1 #10 Al w/1 or 2 #12 Cu
2 #12 Al solid w/1 #14 Cu
2 #10 Al solid w/1 #12 Cu
1 #10 Al w/1 or 2 #18 Cu Card of 10 30-765
1 #10 Al w/1 or 2 #14 Cu
2 #10 Al solid w/1 #18 Cu
2 #10 Al solid w/1 #14 Cu
1 #12 Al w/1 or 2 #16 Cu
Purple 2 #12 Al solid w/1 #10 Cu Card of 25 30-165
65 2 #12 Al solid w/1 #16 Cu
1 #12 Al solid w/1 or 2 #10 Cu
1 #10 Al w/1 or 2 #16 Cu
1 #12 Al stranded w/1 or 2 #10 Cu Box of 100 30-265
2 #10 Al solid w/1 #16 Cu
solid
1 #12 Al w/1 or 2 #18 Cu
1 #12 Al w/1 or 2 #12 Cu
2 #12 Al solid w/1 #18 Cu Carton of 1,000 30-365
2 #12 Al solid w/1 #12 Cu
600V maximum building wire; 1,000V signs or light fixtures

WARNING:
1. One time use only. Do not reuse connector.
2. Do not use on aluminum to aluminum wire combinations.
3. Wiring must comply with all applicable electrical codes.
4. Use with aluminum-to-copper or copper clad-to-copper connections only.
For a complete listing of UL approved wire combinations, visit us at idealind.com

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 1 0
WIRE TERMINATION

B-CAP® Wire Connectors

Low-Profile Fin
• Low profile design gets into tight spaces and hard-to-reach
spots comfortably
• Slim, classic fins offer a secure grip for extra leverage and
easy installation
• Live-action spring expands to accept wire shape and size
with no pre-twisting
• Unique, space-saving profile is perfect for “old work” or
shallow boxes
• Tough, UL 94V-2 flame-retardant shell rated at
105°C (221°F)
• Green-B® designed for making ground connections and
bonding non-metallic sheathed cable

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
Box of 100 B1-1
600V* 600V* Jar of 250 B1-250JR
B1 Yellow 22 to 10 AWG ,34mm2 to 6,0mm2
Min. 3 #20 – Max. 3 #12 Min. 3-,5mm2 – Max. 3-4,0mm2 Jar of 500 B1-500JR
Bag of 500 B1-B
Box of 100 B2-1
600V* 600V* Jar of 350 B2-350JR
B2 22 to 8 AWG ,34mm2 to 10,0mm2
Red Jar of 500 B2-500JR
Min. 2 #18 – Max. 5 #12 Min. 2-,75mm2 – Max. 5-4,0mm2
Bag of 500 B2-B

600V* 600V* Box of 25 B4-1

Blue-
B4 14 to 6 AWG 2,5mm2 to 16,0mm2
Gray
Min. 2 #12 – Max. 2 #6 Stranded Min. 2-4,0mm2 – Max. 2-16,0mm2 Carton of 250 B4-B

14 to 10 AWG 2,5mm2 to 6,0mm2 Box of 50 BGR-1

BGR Green
Min. 2 #14 – Max. 5 #12 Min. 2-2,5mm2 – Max. 5-4,0mm2 Carton of 250 BGR-B
*1,000V maximum in fixtures and signs

B-TWIST™ Wire Connectors

Long, Swept Wing, Fast-Start Spring WIDER
• All-in-one connector with wide red/yellow range from 2 #18 to 2 #8
RANGE
• Rounded dial-top with vertical ribs provides fast fingertip starts THAN
COMPETITOR’S
• Connection comes to torque quickly to get the job done efficiently TAN/RED
• Long swept-wings improve comfort and torque
• Wide, expanding spring makes for easy starts on even the largest combinations
• Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.

600V* Box of 100 BT2-1

600V*
,75mm2 to 10mm2
BT2™ Red 18 to 8 AWG Jar of 500 BT2-500JR
Min. 2-,75mm2 – Max. 1-8,0mm2
Min. 2 #18 – Max. 2 #8
w/2-6,0mm2 Barrel of 25,000 BT2-SK
*1,000V maximum in fixtures and signs

For a complete listing of UL approved wire combinations, visit us at idealind.com

A- 1 1 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
WireTwist® Wire Connectors
Fixed Spring
• Positive grip shell design for fast, easy installation
• Fixed, square-wire spring creates secure
connections
• Deep skirt protects against flash-over
• Tough, UL 94V-2 flame-retardant shell (105°C/221°F)

Model Color Wire Combination Range Wire Combination Range (mm) Quantity Part No.
300V 300V Box of 100 WT1-1
WT1 Gray 22 to 14 AWG ,34mm2 to 2,5mm2
Min. 3 #22 – Max. 2 #16 Min. 3-,34mm2 – Max. 2-1,5mm2 Bag of 500 WT1-B
300V 300V Box of 100 WT2-1
WT2 Blue 22 to 14 AWG ,34mm2 to 2,5mm2
Min. 3 #20 – Max. 3 #16 Min. 3-,50mm2 – Max. 3-1,5mm2 Bag of 500 WT2-B
600V* 600V* Box of 100 WT3-1
WT3 Orange 22 to 14 AWG ,34mm2 to 2,5mm2
Min. 2 #18 – Max. 2 #14 Min. 2-,75mm2 – Max. 2-2,5mm2 Bag of 500 WT3-B
600V* 600V* Box of 100 WT4-1
WT4 Yellow 22 to 10 AWG ,75mm2 to 6,0mm2
Min. 3 #20 – Max. 2 #12 Min. 2-,75mm2 – Max. 2-4,0mm2 Bag of 500 WT4-B
600V* 600V* Box of 100 WT6-1
WT6 Red 20 to 8 AWG ,50mm2 to 10,0mm2
Min. 2 #14 – Max. 4 #12 Min. 2-2,5mm2 – Max. 4-4,0mm2 Bag of 250 WT6-B
*1,000V maximum in fixtures and signs

WingTwist® Wire Connectors

Contoured Spring
• Contoured wing design provides enhanced torque
• Expanding, square-wire spring creates secure connections
• Wide, deep skirt opening accommodates a variety of wire
combinations
• Tough, UL 94V-2 flame retardant shell (105°C/221°F)
• Model WGR UL 486A listed.
Wire Combination Range
Model Color Wire Combination Range Quantity Part No.
(mm)
Box of 100 WT51-1
600V* 600V*
Bag of 500 WT51-B
WT51 Yellow 18 to 10 AWG ,75mm2 to 6,0mm2
Jar of 500 WT51-500JR
Min. 2 #18 – Max. 3 #12 Min. 2-,75mm2 – Max. 3-4,0mm2
Barrel of 25,000 WT51-SK
600V* Box of 100 WT41-1
600V*
,34mm2 to 6,0mm2 Bag of 500 WT41-B
WT41 Tan 22 to 10 AWG
Min. 2-0,5mm2 – Max. Jar of 500 WT41-500JR
Min. 2 #20 – Max. 3 #10
3-6,0mm2 Barrel of 25,000 WT41-SK
Box of 100 WT52-1
600V* 600V* Bag of 500 WT52-B
WT52 Red 18 to 10 AWG ,75mm2 to 6,0mm2
Jar of 500 WT52-500JR
Min. 2 #14 – Max. 5 #12 Min. 2-2,5mm2 – Max. 5-4,0mm2
Barrel of 25,000 WT52-SK
600V* Box of 50 WT54-1
600V*
2,5mm2 to 16,0mm2
WT54 Blue 14 to 6 AWG
Min. 3-4,0mm2 – Max.
Min. 3 #12 – Max. 2 #6 Bag of 100 WT54-B
2-16,0mm2
14 to 10 AWG 2,5mm to 6,0mm
2 2
Box of 50 WGR-1
WGR Green
Min. 2 #14 – Max. 5 #12 Min. 2-2,5mm2 – Max. 5-4,0mm2 Carton of 250 WGR-B
*1,000V maximum in fixtures and signs

For a complete listing of UL approved wire combinations, visit us at idealind.com

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 1 2
WIRE TERMINATION

Combination WingTwist®/WireTwist®
Wire Connectors
• Kit Contains:
– WT1 WireTwist® Wire Connector, Gray, (Qty. 100)
– WT2 WireTwist® Wire Connector, Blue, (Qty. 100)
– WT3 WireTwist® Wire Connector, Orange, (Qty. 100)
– WT4 WireTwist® Wire Connector, Yellow, (Qty. 100)
– WT6 WireTwist® Wire Connector, Red, (Qty. 25)
– WT41 WingTwist® Wire Connector, Tan, (Qty. 60)
– WT51 WingTwist® Wire Connector, Yellow, (Qty. 100)
– WT52 WingTwist® Wire Connector, Red, (Qty. 25)
– WT54 WingTwist® Wire Connector, Blue, (Qty. 10)
– Reusable case

Description Quantity Part No.

WireTwist /WingTwist Wire Connector Combination Kit
® ®
620 pcs. 30-2091

Spin-Twist® Wire Connector Socket

• Speeds installation of IDEAL and Buchanan Wire Connectors
• For use with electric corded or cordless drill drivers
• 1/4 in. chuck fits most drills or drive sockets

Description Part No.

For Connector Models: Wire-Nut (Models 74B & 76B only), Wing-Nut , Twister , B-CAP , WireTwist
® ® ® ® ® ® ®
30-902
(WT4 & WT6 models) & WingTwist® Wire Connectors

IDEAL Wire connectors are available in:

Barrels Store N’ Pour™ Jars
For really big jobs when Easy-pour design keeps
you can’t afford to run connectors clean and
out of connectors. your shelf organized.

360° Zipper Bags Boxes

These bags are convenient, For small jobs at hand,
re-closeable and stand-up just grab a box.
on the job.

A- 1 3 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
PUSH-IN WIRE CONNECTORS
In-Sure® Push-In Wire Connectors
If it’s IDEAL, it’s a quality connector – and the In-Sure®
Push-In Wire Connector is no exception. Color-coded,
the clear polycarbonate housing allows for visual
GREAT
FOR
verification of every connection. The ergonomic design RESIDENTIAL
of the In-Sure is easier to grip which means more
®
APPLICATIONS
comfortable push-in type connections.
Perfect for OEM lighting manufacturing, prefabricated wiring systems,
and any other branch circuit wiring applications where a traditional
twist-on wire connector would be used. Simply push the wire in – the
low insertion force makes it easy. UL Listed, CSA Certified and rated to
600V and 105°C, the In-Sure® Push-In Wire Connector saves time and
improves productivity while perfecting connections.

Stainless steel inserts restrict pull out

Visual verification of connection

Tin-plated copper bus system

Check port for continuity testing

Color-coded for easy identification

SpliceLine® In-Line Wire Connectors

The SpliceLine® In-Line Wire Connector is a
revolutionary in-line wire connector that utilizes
75%
FASTER
patented push-in technology in a unique design to THAN BUTT SPLICES
provide a crimp-free, solderless butt splice faster and NO MORE
CRIMPING
easier. The 2-port model supports a wide range of
either stranded or solid wires, allowing one connector to cover the
same range as three traditional butt splices.
The end-to-end connection of SpliceLine® is a great solution for
today’s pre-fab operations and also makes it perfect for lengthening
short wires in tight spaces. It easily passes through ½ in. knockouts
and the transparent polycarbonate allows for visual inspection,
providing a secure connection every time.

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 1 4
WIRE TERMINATION

SpliceLine® In-Line Wire Connectors

• Faster alternative to traditional butt splices
• Crimp-free, solderless push-in butt splice

WIRE TERMINATION
• Slim design fits through 1/2 in. knockout
• Perfect for lengthening wire
• Transparent polycarbonate housing for visual
inspection of connection
• Listed for UL 467 LISTED

Model Color Rating Wire Range Quantity Part No.

Bag of 10 30-1342S
Solid: 20-12 AWG Box of 100 30-1042
600V/20A
42 Orange Stranded: 16-12 AWG (≤19 str.)
105°C Jar of 300 30-1042J
Stranded Tin-Bonded: 18-14 AWG (≤19 str.)
Box of 2,500 30-1642

In-Sure® Push-In Wire Connectors

Strip. Push. Connect.
• No-twist push-in design reduces repetitive motion fatigue
• Low insertion force for fast and easy connections
• Compact size makes installation easy
• Clear shell gives visual verification of connection
• Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
• Models 32, 33, 34 and 39 Listed for UL 467 LISTED

Amp
Model Color Ports Wire Range Quantity Part No.
Rating
Box of 100 30-1032
32 Red 2 20 Amp Jar of 300 30-1032J
Box of 5,000 30-1632
Solid: 20 – 12 AWG Box of 100 30-1033
Stranded: 16 – 12 AWG (≤19 str.)
33 Orange 3 20 Amp Jar of 250 30-1033J
18 AWG (7 Strand)
Stranded (Tin Bonded): 18 – 14 AWG (≤19 str.) Box of 5,000 30-1633
Box of 100 30-1034
34 Yellow 4 20 Amp Jar of 200 30-1034J
Box of 5,000 30-1634
Jar of 150 30-087J
87 Gray 5 20 Amp
Solid: 20 – 12 AWG Box of 3,000 30-687
Stranded: 16 – 14 AWG (≤19 str.) Jar of 100 30-088J
88 Blue 6 Stacked 20 Amp
18 AWG (7 Strand) Box of 2,500 30-688
Stranded (Tin Bonded): 18 – 14 AWG (≤19 str.) Jar of 100 30-090J
90 Black 8 20 Amp
Box of 2,000 30-690
Solid: 14 – 10 AWG Box of 50 30-1039
39 Blue 3 30 Amp Stranded: 12 – 10 AWG (≤19 str.)
Stranded (Tin Bonded): 14 – 10 AWG (≤19 str.) Jar of 150 30-1039J
COPPER TO COPPER ONLY. Do not use on aluminum. Temperature rating: 105°C (221°F) maximum. 600V maximum building wire, 1000V maximum
signs or lighting fixtures.

A- 1 5 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
POWERPLUG® LUMINAIRE DISCONNECTS
The IDEAL PowerPlug® Luminaire Disconnect fully meets the current National Electric Code and Canadian Electric
Code for non-residential fluorescent luminaires. The PowerPlug® helps reduce electrical shock hazard during ballast
replacement by safely disconnecting hot and neutral ballast wiring. Both halves of PowerPlug® meet UL and CSA
finger-probe safety requirements. Advanced push-in technology provides fast, efficient ballast connections resulting
in reduced installation time and improved labor savings. The PowerPlug® is available in 2-pole and 3-pole models
with options for new installation or ballast retrofitting.

Color-coded ends: ballast side

(white) and line side (orange)

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 1 6
WIRE TERMINATION

PowerPlug® Luminaire Disconnects ®

• Allows safe disconnect of hot and neutral ballast wiring
• Perfect for new, retrofit or OEM lighting installations

WIRE TERMINATION
• Push-in technology results in quicker connections, Model 103
saving time and increasing productivity
Model 183
• Both halves are “touch-safe” per UL 2459
• Fits through 1/2 in. knockout Model 102® Model 182®

Luminaire Disconnect
Selection Chart 3HME

Application New Installations Retrofits

For 1-ballast fixtures 102 ®
102®, 182®
For 2-ballast, dimming and switching fixtures 103 103, 183

Model Color Electrical Rating Line Side Ballast Side Quantity Part No.

Card of 25 30-372
Solid: #12 - #18 Solid: #12 - #18
Stranded: #12 – #14 (≤19 str.) Stranded: #12 – #14 (≤19 str.)
Jar of 75 30-382J
102® 6 Amps/600 Stranded Tin-Bonded: Stranded Tin-Bonded:
Orange
2-wire Volts Max. #12 – #14 (≤19 str.) #12 – #14 (≤19 str.)
Jar of 150 30-352J
#16 (≤26 str.) #16 (≤26 str.)
#18 (≤16 str.) #18 (≤16 str.)
Box of 1,000 30-102

Solid: #12 - #18 Card of 20 30-383X

Solid: #18
Stranded: #12 – #14 (≤19 str.)
Stranded: None
103 6 Amps/600 Stranded Tin-Bonded:
Orange Stranded Tin-Bonded: Jar of 100 30-353XJ
3-Wire Volts Max. #12 – #14 (≤19 str.)
#18 (≤16 str.)
#16 (≤26 str.)
#18 (≤16 str.) Box of 1,000 30-103X

Box of 100 30-082

182® 3 Amps/600
Orange Solid: #18 Solid: #18 Box of 2,500 30-682
2-Wire Volts Max.
Box of 1,000 30-682L

183 3 Amps/600 Box of 100 30-083

Orange Solid: #18 Solid: #18
3-Wire Volts Max. Box of 2,500 30-683
1,000V maximum fixtures and signs.

Basic Lighting Maintenance Kit Lighting Installation Kit

• Kit Contains: • Kit Contains:
– Wire-Nut® Wire Connectors – Wire-Nut® Wire Connectors
(25 Model 72B® Blue, 25 (100 Model 72B® Blue)
Model 73B® Orange) – In-Sure® Push-In Wire
– In-Sure® Push-In Wire Connectors (50 Model
Connectors (25 Model 33, 33 Orange)
Orange) – PowerPlug® Luminaire
– SpliceLine® In-Line Wire Disconnects (30 Model 102® 2-Port,
Connectors (25 Model 42 Orange) 50 Model 182® 2-Port)
– PowerPlug® Luminaire Disconnects (30 Model – 1 Twist-a-Nut™ Screwdriver/Nut Driver (35-908)
102® 2-Port, 15 Model 103 3-Port, 50 Model 182® – 1 Reflex™ Super T®-Stripper Wire Stripper (45-615)
2-Port)

Description Part No. Description Part No.

Basic Lighting Maintenance Kit 30-2255 Lighting Installation Kit 30-2257

A- 1 7 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
GROUNDING PRODUCTS
We’ve got grounding covered!
Grounding pigtails are designed for a wide variety of grounding
applications. The ultra-flexible lead wire and bonding jumpers
make fast and efficient pigtailing.
• Convenient for device grounding applications
• Safe, fast and efficient for cost-effective grounding jobs
• Ensures compliance with Article 250 of the National
Electrical Code

Stranded
• Heavy-duty fork terminals attach easily to
device grounding screw

Solid

Combination

Screws
• 10-32 x 3/8 in. zinc-plated thread-forming,
hole-finding ground screw with combination
Slotted, Phillips, Hex and #2 Robertson head.
Sold individually or factory-assembled on to
pigtails.

Solid Wire Grounding Tail with Push-In

Wire Connector
THREAD
FORMING

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 1 8
WIRE TERMINATION

Solid Wire Grounding Tails

Description Quantity Part No. Description Quantity Part No.
14 AWG solid, 8 in. tail w/loop & Bulk Pack of 12 AWG solid, 8 in. tail w/loop & Bulk Pack of
30-3390 30-3496
ground screw and stripped end 250 ground screw and stripped end 1,000
12 AWG solid, 6.5 in. tail w/loop & 12 AWG solid, 10 in. tail w/loop &
Bag of 50 30-3404 Bag of 50 30-3410
ground screw and stripped end ground screw and stripped end
12 AWG solid, 6.5 in. tail w/loop & Bulk Pack of 12 AWG solid, 10 in. tail w/loop & Bulk Pack of
30-3402 30-3394
ground screw and stripped end 1,000 ground screw and stripped end 500
12 AWG solid, 8 in. tail w/loop & 12 AWG solid, 12 in. tail w/loop & Bulk Pack of
Bag of 50 30-3392 30-3396
ground screw and stripped end ground screw and stripped end 1,000
12 AWG solid, 8 in. tail w/loop & Plastic Box of Bulk packs are bundled in quantities of 50.
30-3399
ground screw and stripped end 100
Bulk packs are bundled in quantities of 50.

Stranded Wire Grounding Tails

Description Quantity Part No. Description Quantity Part No.
14 AWG stranded, 8 in. tail w/#10 12 AWG stranded, 8 in. tail w/#10 Bulk pack of
Bag of 25 30-3183 30-3580
fork & #10 ring and ground screw fork & stripped end 1,000
12 AWG stranded, 8 in. tail w/#10 12 AWG stranded, 8 in. tail
Bag of 25 30-3184 Bulk Pack of
fork & #10 ring and ground screw w/#10 ring & ground screw and 30-3201
1,000
stripped end
12 AWG stranded, 8 in. tail w/#10 Plastic box
30-3385
fork & #10 ring and ground screw of 50 12 AWG stranded, 10 in. tail w/#10 Bulk pack of
30-3311
fork & #10 ring and ground screw 500
12 AWG stranded, 8 in. tail w/#10 Bulk pack of
30-3284
fork & #10 ring and ground screw 1,000 12 AWG stranded, 12 in. tail w/#10 Bulk pack of
30-3413
fork & #10 ring and ground screw 1,000
12 AWG stranded, 8 in. tail w/#10 Bulk pack of
30-3285
fork & #10 ring (no ground screw) 1,000 Bulk packs are bundled in quantities of 50.

12 AWG stranded, 8 in. tail w/#10 LISTED

Bag of 25 30-3480
fork & stripped end
Bulk packs are bundled in quantities of 50.

LISTED
Combo Grounding Tails
30-3289

Description Quantity Part No. Description Quantity Part No.

2-wire combo: 12 AWG solid 8 in. tail, 2-wire combo: 12 AWG stranded 8 in.
one stripped end, one end w/ground tail w/#10 ring and ground screw and Bag of 25 30-3288
screw; joined to 12 AWG stranded 8 in. Box of 500 30-3286 two #10 fork tails
tail at a ring terminal, w/fork terminal
on second end 3-wire combo: 12 AWG stranded, 8 in.
tail w/#10 ring & ground screw, one Bag of 25 30-3289
2-wire combo: 12 AWG stranded 8 in. stripped-end tail and two #10 fork tails
tail w/#10 ring & ground screw, one Bag of 25 30-3287
stripped-end tail and one #10 fork tail
LISTED

LISTED

Push-Tails™

Description Quantity Part No.

12 AWG solid, 8 in. tail w/loop and
ground screw and 4-port push-in Bag of 25 30-3415
wire connector
12 AWG solid, 8 in. tail w/loop and
ground screw and 4-port push-in Carton of 250 30-3414
wire connector

A- 1 9 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Grounding Screws
• 10-32 x 3/8 in. Zinc-plated grounding screws offer a THREAD
thread-forming, hole-finding feature plus combination
hex, Phillips, slotted and Robertson head
FORMING
• Ensures compliance with Article 250 of NEC.

Description Quantity Part No.

Jar of 100 30-3594
Thread-forming, hole-finding, combination hex, Phillips, slotted and Robertson head
Pack of 50 30-3194

Non-Grounding Stranded Wire Pigtails

• 8 in. 12 AWG Stranded Pigtails – White or Black, #10
Fork and Stripped end

Description Quantity Part No.

12 AWG stranded, 8 in. tail w/#10 fork and stripped end, white Bag of 25 30-3470
12 AWG stranded, 8 in. tail w/#10 fork and stripped end, black Bag of 25 30-3471
12 AWG stranded, 8 in. tail w/#10 fork and stripped end, white Bulk pack of 1,000 30-3570
12 AWG stranded, 8 in. tail w/#10 fork and stripped end, black Bulk pack of 1,000 30-3571
Bulk packs are bundled in quantities of 50.

Grounding Wire Connectors

• Designed for making ground connections and bonding
non-metallic sheathed cable
• Contoured wings for superior leverage
• Live-action, square-wire spring provides quality grounding
connections
LISTED
• Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Model Description Wire Combination Range Wire Combination Range (mm) Quantity Part No.
Greenie® 2,5mm2 to 6,0mm2 Box of 100 30-092
14 to 10 AWG
92® Grounding Wire Min. 2-2,5mm2 Jar of 150 30-092J
Min. 2 #14 – Max. 4 #12
Connector Max. 2-4,0mm2 w/1-2,5mm2 Bag of 500 30-292

Grounding Recap
Solid (w/loop and Ground Screw) Stranded
• 14 AWG • 14 AWG
– 8 in. – 8 in. w/#10 Fork and #10 Ring & Ground Screw
• 12 AWG • 12 AWG
– 6-1/2 in. – 8 in. w/#10 Fork & Stripped End
– 8 in. – 8 in. w/#10 Fork and #10 Ring
– 10 in. – 8 in. w/ #10 Fork and #10 Ring & Ground Screw
– 12 in. – 10 in. w/#10 Fork and #10 Ring & Ground Screw
– 12 in. w/#10 Fork and #10 Ring & Ground Screw
Combo (12 AWG only):
• 2-Wire
• 3-Wire

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 2 0
WIRE TERMINATION

Steel Crimp Connectors Copper Splice Cap Crimp

Connectors
• Designed for making fast,
permanent, pressure-type
connections
• Designed for making fast, permanent, pressure-
• Solid copper sleeves require
type connections
less crimping pressure and
• Long-zinc-plated steel sleeves maximize contact resist corrosion in harsh
area with conductors environments
• UL Listed to 486C and CSA Certified to C22.2 • UL 486C Listed and CSA C22.2 #188 Certified;
#188; comply with Federal Specification W-S-610E comply with Federal Specification W-S-61D
• Temperature rating: 105°C (221°F) Wire Combination
Description Quantity Part No.
Range
Part
Model Wire Combination Range Quantity 600V* Bag of 100 2006S
No.
18 to 10 AWG Bag of
Bag of 100 30-410 Copper Crimp Min. 2 #18, - Max. 4 #12 2006SB
1,000
600V Connector
Carton of 600V* Bag of 50 2011S
18 – 10 AWG 30-510
410 1,000 14 to 4 AWG
Min. 1 #14 & 1 #18 –
Min. 2 #10 - Max. 2 #6 Bag of 500 2011SB
Max. 2 #10 & 2 #14 Keg of
30-610 *1,000V maximum in fixtures and signs.
10,000
IDEAL hand crimp tools UL Listed for
600V Box of 50 30-411 LISTED
models 2006S and 2011S: C24, 30-428,
411 18 – 8 AWG Carton of 30-429 and 30-430.
Min. 3 #12 – Max. 4 #10 30-511
1,000
600V Box of 50 30-412
Splice Cap Insulators
18 – 4 AWG • Convenient, safe and fast
412 Carton of
Min. 1 #14 & 1 #16 – Max. 2 30-512
#8 & 1 #6 1,000 installation

IDEAL hand crimp tools UL listed for Models • Snap-on nylon construction

410, 411, 412: 30-428, 30-429, 30-430. • Rated at 105°C (221°F) – 600V
(1,000V maximum in fixtures
Wrap-Cap® Insulators and signs)

Description Quantity Part No.

For use on Connector Box of 100 2007
Model 2006S Bag of 1,000 2007B
For use on Connector Box of 50 2014
• Provide high dielectric and physical protection for UL
Listed, non-insulated pressure-type wire connectors Model 2011S Bag of 500 2014B

• Unique design completely covers splice — insulates

both around and between wires and eliminates need
for tape
• UL Listed to 486C and CSA Certified for 600V
maximum building wiring (1,000V maximum for
fixtures and signs); temperature rated at 75°C (167°F)
maximum.

Model Description Quantity Part No.

Insulator for Model 410 Box of 50 30-445
Connectors. Can also be
415
used on Buchanan 2006S Carton of
30-515
& 2011S Copper Crimps 1,000

Insulator for Model 411 & Box of 25 30-447

412 Connectors. Can also
417
be used on Buchanan
Carton of
2011S Copper Crimps 30-517
1,000

A- 2 1 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
STREET LIGHT KITS
SLK® Disconnect Fuse Kits
• Breakaway fuseholder for use in:
– Roadway & street lighting
– Parking lot & area lighting
• UL Listed for submersible installations
• Bright orange color for ease of visibility
• Large selection of configurations
• Set screw or crimp terminations available

The IDEAL SLK® Disconnect Fuse Kit is a waterproof breakaway safety device that de-energizes roadway
lights, streetlights, parking lot lights, and other freestanding electrical fixtures in the event of a knock-
down, or when the fixtures need maintenance. This helps protect first responders, bystanders, and ser-
vice personnel from potentially life-threatening electrical shock hazards.
The SLK® is the first Disconnect Fuse Kit listed to UL’s ECIS category for special purpose connectors.
This category contains a set of rigorous tests from a host of UL standards, including UL 486D, the
standard for submersibility. This means that the SLK® will stand up to the wet conditions often seen in
and around pole bases, junction boxes, and hand holes.
In addition, the bright orange color of the SLK® makes the product easy to locate in dark junction boxes,
in hand holes, or in a nighttime knockdown situation when the connector is often buried amongst dirt,
mud, and debris.
• Accepts 13/32 in. x 1-1/2 in. midget-style fuse (Note: Fuse not included)
• Wire Range: 2-14 AWG (Cu & Al rated)
• Ratings: 30A, 600V, 105°C
• Maximum available short circuit current of 10,000

Neutral configurations High visibility orange material

come with white fuse- (UL94V-2 flame rated)
holder and dummy fuse
Paired (hot/neutral)
configurations are keyed to
prevent reverse polarities
Ribbed boots provide
superior grip

Fuse stays on
de-energized load side
when separated

Crimp or set screw terminations

Large, clear markings

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 2 2
WIRE TERMINATION

SLK® Ordering Information

To Determine which Kit to Use: Examples:
1. Select the base part number, based on crimp termination (TABLE 1) or 1. An in-line fused breakaway kit with crimp terminations, one 10 AWG wire on the
set screw termination (TABLE 3), number of wires on line/load side, line side and one 10 AWG wire on the load side is ordered as a 30-C1616.
and wire size. 2. An in-line non-fused (i.e., neutral) breakaway kit with set screw terminations, one
2. If necessary, modify the base part number according to neutral, dual, 6 AWG wire on the line side and one 10 AWG wire on the load side is ordered as
paired, or tap (i.e., non-breakaway) configurations. Use TABLE 2 for a 30-S1212N.
crimp variations and TABLE 4 for set screw variations. 3. A Y-tap fused breakaway kit with crimp terminations, two 6 AWG wires on the line
3. See right for examples. side and one 10 AWG wire on the load side is ordered as a 30-C2216.
Table 1: Crimp Load
Base Part 1 Wire 2 Wire
numbers 2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG 2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG
2 AWG 30-C1212 30-C1212 30-C1216 30-C1216 30-C1216 30-C1216 30-C1216 30-C1222 30-C1222 30-C1226 30-C1226 30-C1226
4 AWG 30-C1212 30-C1216 30-C1216 30-C1216 30-C1216 30-C1216 30-C1222 30-C1222 30-C1226 30-C1226 30-C1226
6 AWG 30-C1616 30-C1616 30-C1616 30-C1616 30-C1616 30-C1622 30-C1622 30-C1626 30-C1626 30-C1626
1 Wire

8 AWG 30-C1616 30-C1616 30-C1616 30-C1616 30-C1622 30-C1626 30-C1626 30-C1626

10 AWG
ONE KIT 30-C1616 30-C1616 30-C1616 30-C1626 30-C1626 30-C1626
will cover
a large
12 AWG wire range 30-C1616 30-C1616 30-C1626 30-C1626
14 AWG 30-C1616 30-C1626
Line

2 AWG 30-C2012 30-C2012 30-C2016 30-C2016 30-C2016 30-C2016 30-C2016 30-C2022 30-C2022 30-C2026 30-C2026 30-C2026
4 AWG 30-C2012 30-C2016 30-C2016 30-C2016 30-C2016 30-C2016 30-C2022 30-C2022 30-C2026 30-C2026 30-C2026
6 AWG 30-C2216 30-C2216 30-C2216 30-C2216 30-C2216 30-C2222 30-C2222 30-C2226 30-C2226 30-C2226
2 Wire

8 AWG 30-C2216 30-C2216 30-C2216 30-C2216 30-C2222 30-C2226 30-C2226 30-C2226

10 AWG 30-C2616 30-C2616 30-C2616 30-C2626 30-C2626 30-C2626
12 AWG 30-C2616 30-C2616 30-C2626 30-C2626
14 AWG 30-C2616 30-C2626
CRIMP

Note: Crimp connections on larger gauge wire (2 #8, 2 #6, 1 #8, 1 #6 or 1 #4) require IDEAL #88-843 Mechanical Indentor and Crimp Tool. Crimps
connections for #14 - #10 AWG with 1/2 in. strip length.
Table 2: Crimp Variations (14-10 AWG with 1/2 in. strip length, use 30-425 and 30-429)
Base Part Variation (If applicable) Base Part Variation (If applicable)
Number (Hot) Neutral Dual Paired Non-Breakaway Number (Hot) Neutral Dual Paired Non-Breakaway
30-C1212 30-C1212N 30-C1212D 30-C1212P 30-C2016 30-C2016N 30-C2016T
30-C1216 30-C1216N 30-C1216D 30-C1216P 30-C2216 30-C2216N 30-C2216T
30-C1616 30-C1616N 30-C1616D 30-C1616P 30-C2616 30-C2616N 30-C2616T
30-C1222 30-C1222N 30-C2022 30-C2022N
30-C1226 30-C1226N 30-C2026 30-C2026N
30-C1622 30-C1622N 30-C2222 30-C2222N
30-C1626 30-C1626N 30-C2226 30-C2226N
30-C2012 30-C2012N 30-C2012T 30-C2626 30-C2626N

Table 3: Set Load

Screw Base 1 Wire 2 Wire
Part numbers 2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG 2 AWG 4 AWG 6 AWG 8 AWG 10 AWG 12 AWG 14 AWG
2 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222
4 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222
SET SCREW

6 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222 30-S1222
1 Wire

8 AWG 30-S1212 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222 30-S1222

10 AWG
ONE KIT 30-S1212 30-S1212 30-S1212 30-S1222 30-S1222 30-S1222
will cover
a large
12 AWG wire range 30-S1212 30-S1212 30-S1222 30-S1222
14 AWG 30-S1212 30-S1222
Line

2 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222
4 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222
6 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222 30-S2222
2 Wire

8 AWG 30-S2212 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222 30-S2222

10 AWG 30-S2212 30-S2212 30-S2212 30-S2222 30-S2222 30-S2222
12 AWG 30-S2212 30-S2212 30-S2222 30-S2222
14 AWG 30-S2212 30-S2222

Table 4: Set Screw Variations

Variation (If applicable) Note: For combination 2 wire line
Base Part Number (2-14 AWG Set Screw) and 1 wire load
Neutral Dual Paired Non-Breakaway
(6-14 AWG Crimp), use 30-B2216.
30-S1212 30-S1212N 30-S1212D 30-S1212P
30-S1222 30-S1222N
30-S2212 30-S2212N 30-S2212T
30-S2222 30-S2222N 30-S2222D 30-S2222P

A- 2 3 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
In-Line Fused In-Line
Non-Fused
Description 1 Line Side 1 Load Side Part No. Description 1 Line Side 1 Load Side Part No.
In-Line Breakaway, set screw; In-Line Breakaway, set screw;
2-14 AWG 2-14 AWG 30-S1212 2-14 AWG 2-14 AWG 30-S1212N
fused (Hot) non-fused (Neutral)
In-Line Breakaway, crimp; In-Line Breakaway, crimp;
2-4 AWG 2-4 AWG 30-2C112 2-4 AWG 2-4 AWG 30-C1212N
fused (Hot) non-fused (Neutral)
In-Line Breakaway, crimp; In-Line Breakaway, crimp;
2-4 AWG 6-14 AWG 30-C1216 2-4 AWG 6-14 AWG 30-C1216N
fused (Hot) non-fused (Neutral)
In-Line Breakaway, crimp; In-Line Breakaway, crimp;
6-14 AWG 6-14 AWG 30-C1616 6-14 AWG 6-14 AWG 30-C1616N
fused (Hot) non-fused (Neutral)

Y-Tap Fused Y-Tap

Non-Fused
Description 2 Line Side 1 Load Side Part No. Description 2 Line Side 1 Load Side Part No.
Y-Tap Breakaway, set Y-Tap Breakaway, set
2-14 AWG 2-14 AWG 30-S2212 2-14 AWG 2-14 AWG 30-S2212N
screw; fused (Hot) screw; non-fused (Neutral)
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp;
2-4 AWG 2-4 AWG 30-C2012 2-4 AWG 2-4 AWG 30-C2012N
fused (Hot) non-fused (Neutral)
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp;
2-4 AWG 6-14 AWG 30-C2016 2-4 AWG 6-14 AWG 30-C2016N
fused (Hot) non-fused (Neutral)
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp;
6-8 AWG 6-14 AWG 30-C2216 6-8 AWG 6-14 AWG 30-C2216N
fused (Hot) non-fused (Neutral)
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp;
10-14 AWG 6-14 AWG 30-C2616 10-14 AWG 6-14 AWG 30-C2616N
fused (Hot) non-fused (Neutral)
Combination Y-Tap 2-14 AWG 6-14 AWG
30-B2216
Breakaway, fused (Hot) set screw crimp

Non-Breakaway Fused Dual In-Line Fused

Description 2 Line Side 1 Load Side Part No.

Y-Tap Non-Breakaway, set
2-14 AWG 2-14 AWG 30-S2212T
screw; fused (Hot)
Description 1 Line Side 1 Load Side Part No.
Y-Tap Non-Breakaway,
2-4 AWG 2-4 AWG 30-C2012T Dual In-Line Breakaway, set
crimp; fused (Hot) 2-14 AWG 2-14 AWG 30-S1212D
screw; fused (both Hot)
Y-Tap Non-Breakaway,
2-4 AWG 6-14 AWG 30-C2016T Dual In-Line Breakaway,
crimp; fused (Hot) 2-4 AWG 2-4 AWG 30-C1212D
crimp; fused (both Hot)
Y-Tap Non-Breakaway,
6-8 AWG 6-14 AWG 30-C2216T Dual In-Line Breakaway,
crimp; fused (Hot) 2-4 AWG 6-14 AWG 30-C1216D
crimp; fused (both Hot)
Y-Tap Non-Breakaway,
10-14 AWG 6-14 AWG 30-C2616T Dual In-Line Breakaway,
crimp; fused (Hot) 6-14 AWG 6-14 AWG 30-C1616D
crimp; fused (both Hot)

Single-Pole In-Line Paired

1 Line 1 Load
Description Part No.
Side Side
Paired In-Line Breakaway, set screw; one fused (Hot);
2-14 AWG 2-14 AWG 30-S1212P
one non-fused (Neutral)
Paired In-Line Breakaway, crimp; one fused (Hot); one
2-4 AWG 2-4 AWG 30-C1212P
non-fused (Neutral)
Paired In-Line Breakaway, crimp; one fused (Hot); one
2-4 AWG 6-14 AWG 30-C1216P
non-fused (Neutral)
SLK accepts solid or stranded and copper or
Paired In-Line Breakaway, crimp; one fused (Hot); one
6-14 AWG 6-14 AWG 30-C1616P aluminum conductors.
non-fused (Neutral)

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 2 4
WIRE TERMINATION

One Wire Line/2 Wires Load Fused One Wire Line/2 Wires Load
Non-Fused

1 Line 2 Load 1 Line 2 Load

Description Part No. Description Part No.
Side Side Side Side
Y-Tap Breakaway, set screw; Y-Tap Breakaway, set screw; 2-14 2-14
2-14 AWG 2-14 AWG 30-S1222 30-S1222N
fused (Hot) non-fused (Neutral) AWG AWG
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp; non- 2-4
2-4 AWG 6-8 AWG 30-C1222 6-8 AWG 30-C1222N
fused (Hot) fused (Neutral) AWG
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp; non- 2-4 10-14
2-4 AWG 10-14 AWG 30-C1226 30-C1226N
fused (Hot) fused (Neutral) AWG AWG
Y-Tap Breakaway, crimp; Y-Tap Breakaway, crimp; non- 6-14
6-14 AWG 6-8 AWG 30-C1622 6-8 AWG 30-C1622N
fused (Hot) fused (Neutral) AWG
Y-Tap Breakaway; crimp; Y-Tap Breakaway; crimp; non- 6-14 10-14
6-14 AWG 10-14 AWG 30-C1626 30-C1626N
fused (Hot) fused (Neutral) AWG AWG

Two Wires Line/2 Wires Load Fused Two Wire Lines/2 Wires Load
Non-Fused

2 Line 2 Load 2 Line 2 Load

Description Part No. Description Part No.
Side Side Side Side
2-Pole Breakaway, set screw; 2-Pole Breakaway, set screw; 2-14
2-14 AWG 2-14 AWG 30-S2222 2-14 AWG 30-S2222N
fused (Hot) non-fused (Neutral) AWG
2-Pole Breakaway, crimp; 2-Pole Breakaway, crimp; non-
2-4 AWG 6-8 AWG 30-C2022 2-4 AWG 6-8 AWG 30-C2022N
fused (Hot) fused (Neutral)
2-Pole Breakaway, crimp; 10-14 2-Pole Breakaway, crimp; non- 10-14
2-4 AWG 30-C2026 2-4 AWG 30-C2026N
fused (Hot) AWG fused (Neutral) AWG
2-Pole Breakaway, crimp; 2-Pole Breakaway, crimp; non-
6-8 AWG 6-8 AWG 30-C2222 6-8 AWG 6-8 AWG 30-C2222N
fused (Hot) fused (Neutral)
2-Pole Breakaway, crimp; 10-14 2-Pole Breakaway, crimp; non- 10-14
6-8 AWG 30-C2226 6-8 AWG 30-C2226N
fused (Hot) AWG fused (Neutral) AWG
2-Pole Breakaway, crimp; 10-14 2-Pole Breakaway, crimp; non- 10-14
10-14 AWG 30-C2626 10-14 AWG 30-C2626N
fused (Hot) AWG fused (Neutral) AWG

2-Pole Dual 2-Pole

Fused Paired

2 Line 2 Load 2 Line 2 Load

Description Part No. Description Part No.
Side Side Side Side
Dual 2-Pole Breakaway, set Paired 2-Pole Breakaway, set
2-14 AWG 2-14 AWG 30-S2222D
screw; fused (both Hot) screw; one fused (Hot); one 2-14 AWG 2-14 AWG 30-S2222P
non-fused (Neutral)
Y-Tap Dual Fused
Fuseholders (No Boot Included)

30-HS2 30-HC6

2 Line 1 Load
Description Part No.
Side Side 30-HC2
Dual, Y-Tap Breakaway, set screw; 2-14 2-14
30-S2212D 1 Line 1 Load
fused (both Hot) AWG AWG Description Part No.
Side Side
SLK accepts solid or stranded and copper or Fuseholder only, non-breakaway, 2-14 2-14
30-HS2
aluminum conductors. set screw, fused AWG AWG
Fuseholder only, non-breakaway, 2-4
2-4 AWG 30-HC2
crimp, fused AWG
Fuseholder only, non-breakaway, 6-14 6-14
30-HC6
crimp, fused AWG AWG
A- 2 5 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Breakaway Streetlight Connector & Splice
Insulating Kits
• Safe and easy installation in five minutes or less
• No special equipment necessary – requires only a knife, wire stripper, and a hex tool or crimp tool
• Built-in break-away design eliminates de-energization of complete circuits
• Safely separates upon impact without breaking wires – eliminates potential danger and
electrical shock
• Spring-loaded contacts compensate for thermal expansion to maintain integrity
of connection (breakaway models)

Application Guide
(Examples of Several Configurations)
For Poles with Transformer Bases, Standard Bases and Junction Boxes

Underground Feed Phase to Phase

Configurations Comments
D65 dual-in-line for phases and two 84S kits for taps Recommended configuration
Two 82S Y-Tap Kits for phases and taps Cost effective
Underground Feed Phase to Neutral
DP65PN dual-in-line for phase and neutral and two 84S kits
Recommended configuration
for tap
One 82S Y-Tap Kit for phase and tap and one 83S Y-Tap Kit
Cost effective
for neutral and tap

For Lights Mounted to Utility Poles, etc.

Overhead Feed
Configurations Comments
Two B-Tap Insulation Piercing Connectors for phase and/or
®
Recommended configuration, see B-Tap® Insulation Piercing
tap (for insulated conductors only) Connectors on page A-37.

Transformer
Phase to Phase

Two 65 or one D65

to Fuse (Phases)
84 or 84S for Taps
Transformer
End of Run Phase
to Neutral
Two 82S for
Phase (fuse) Two 65 or one
or
D65 for Phases (fuse) D65 to fuse
and two 84S Tap unnecessary
D65PN for Phase
for Taps
and Neutral
84S for Tap

Phase
to Phase End of run
Transformer
82S for Phase (fuse) 65 Kit for Phase (fuse) and
Transformer and 20 Kit for Neutral (common)
Phase or D65PN Kit
to Neutral 83S for Neutral (common)

Note: Fused kits require a 13/32 in. x 1-1/2 in. fuse. DO NOT USE GLASS OR INDICATING TYPES. Waterproof or direct burial wire is recommended. THHN is
NOT recommended.

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 2 6
WIRE TERMINATION

In-Line Fused (Hot) Dual In-Line Fused (Both Hot)

Line side Load side Line side Load side
Double Ridge Single Ridge Double Ridge Single Ridge

Fuse
(not included)
Fuse
(not included)

Description 1 Line Side 1 Load Side Part No. 1 Line 1 Load

Description Part No.
Side Side
In-Line Breakaway,
12-6 AWG Cu 12-6 AWG Cu 65U Dual In-Line Breakaway,
crimp, fused 12-6 AWG 12-6 AWG
D65U
In-Line Breakaway, crimp, fused Cu Cu
4-2 AWG Cu 12-6 AWG Cu 65LC-U
crimp, fused Dual In-Line Breakaway, 4-2 AWG 12-6 AWG
D65-LC-U
In-Line Breakaway, crimp, fused Cu Cu
4-2 AWG Cu 4-2 AWG Cu 65-LC
crimp, fused
Dual In-Line Breakaway, 4-2 AWG 4-2 AWG
D65-LC
crimp, fused Cu Cu

In-Line Non-Fused (Neutral) Paired In-Line Non-Fused

(One Hot, One Neutral)
Line side Load side
Double Ridge Single Ridge
Line side Load side
Double Ridge Single Ridge

Pin
Contact Pin
White Band Contact White Band
(Neutral Side) (Neutral Side)
Fuse
(not included)

Description 1 Line Side 1 Load Side Part No. 1 Line 1 Load

Description Part No.
In-Line Breakaway, Side Side
12-6 AWG Cu 12-6 AWG Cu 20U
crimp, non-fused Paired In-Line Breakaway, 12-6 AWG 12-6 AWG
D65PN-U
In-Line Breakaway, crimp, non-fused Cu Cu
4-2 AWG Cu 12-6 AWG Cu 20-LC-U
crimp, non-fused Paired In-Line Breakaway, 4-2 AWG 12-6 AWG
D65PN-LC-U
In-Line Breakaway, crimp, non-fused Cu Cu
4-2 AWG Cu 4-2 AWG Cu 20-LC
crimp, non-fused Paired In-Line Breakaway, 4-2 AWG 4-2 AWG
D65PN-LC
crimp, non-fused Cu Cu

Stated wire range for crimping stranded conductors. For crimping solid wire: 14-4 AWG, use codes. U, 2 AWG use code LC.
Note: Fused Kits require a 13/32 in. x 1-1/2 in. fuse. DO NOT USE GLASS OR INDICATING TYPES. Waterproof or direct burial
wire is recommended. THHN is NOT recommended. Insulation O.D. range is .120 in. - .430 in. LISTED
LR32565

A- 2 7 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Y-Tap Fused (Hot) Y-Splice Kits
(Non-Breakaway/No Fuse)
Line side Y Insert Load side
housing (receptacle) Assembly housing (plug) Line side Y Insert Load side
housing (receptacle) Assembly housing (plug)

Fuse
(not included) Terminal
Block

2 Line Side 1 Load Side 2 Line Side 1 Load Side

Description Part No. Description Part No.
Set Screw Crimp Set Screw Set Screw
Y-Tap Breakaway, 10-2 AWG Y-Splice Set Screw 10-2 AWG 10-2 AWG
12-6 AWG Cu 82S-ADB1-C 84S-ADB1
fused Cu/Al Tap & Run Cu/Al Cu/Al
Y-Tap Breakaway, 10-2 AWG
4-2 AWG Cu 82S-ADB1-LC Y-Splice Set Screw 10-2 AWG 10-2 AWG
fused Cu/Al 84S-EAFB1
Tap & Run Cu/Al Cu/Al
Y-Tap Breakaway, 10-2 AWG
12-6 AWG Cu 82S-EAFB1-C
fused Cu/Al
Y-Tap Breakaway, 10-2 AWG
4-2 AWG Cu 82S-EAFB1-LC
fused Cu/Al

Y-Tap Non-Fused (Neutral)

Line side Y Insert Load side
housing (receptacle) Assembly housing (plug)

Pin Contact

2 Line Side 1 Load Side

Description Part No.
Set Screw Crimp
Y-Tap Breakaway, 10-2 AWG
12-6 AWG Cu 83S-ADB1-C
non-fused Cu/Al
Y-Tap Breakaway, 10-2 AWG
4-2 AWG Cu 83S-ADB1-LC
non-fused Cu/Al
Y-Tap Breakaway, 10-2 AWG
12-6 AWG Cu 83S-EAFB1-C
non-fused Cu/Al
Y-Tap Breakaway, 10-2 AWG
4-2 AWG Cu 83S-EAFB1-LC
non-fused Cu/Al

Example:
A Y-Tap Kit with set screws for a 2 AWG phase line side conductor with a diameter of .472 in. and a 10 AWG copper load
side conductor is ordered as an 82S-EAFB1-C

For Insulation O.D. range .120 in. - .430 in. use ADB1. For Insulation O.D. range .420 in. - .785 in. use EAFB1

Stated wire range for crimping stranded conductors. For crimping solid wire: 14-4 AWG, use codes. U, 2 AWG use code LC. Note: Fused Kits
require a 13/32 in. x 1-1/2 in. fuse. DO NOT USE GLASS OR INDICATING TYPES. Waterproof or direct burial wire is recommended. THHN is NOT
LISTED
recommended.
LR32565

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 2 8
WIRE TERMINATION

ELECTRICAL CRIMP TERMINALS

The complete line of IDEAL crimp terminals, disconnects and splices offer the right product for any
electrical system that might be encountered. From rings and spades to insulated disconnects, there’s a
product for any wire range. All insulated terminals are color-coded for easy identification and come in
durable plastic packaging for easy storage.

WIRE TERMINATION
• Butted seam-construction prevents splitting under maximum pressure
• Internal barrel serrations grip wires tightly to resist pull-out and reduce electrical resistance
• Tin-plated brass construction for corrosion resistance
• Shouldered barrel insulation quickly positions terminal for proper crimping
• Expanded insulation entry accommodates a wide variety of insulation diameters and provides
additional insulation support

Rings & Forks Disconnects

Splices

Durable plastic package

for easy storage.

A- 2 9 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Ring Terminals Spade Terminals
Vinyl Insulated Ring Terminals Vinyl Insulated Spade Terminals
Max. Max.
Stud Size Part Part Part Part
Wire Range Wire Qty. Qty. Wire Range Stud Size Wire Ins. Qty. Qty.
in. No. No. No. No.
Ins. Dia. Dia.
22 – 18 AWG 6 (3,7mm) 25 83-2121 — — 22 – 18 AWG 6 (3,7mm) 25 83-7111 1,000 84-7111
(0,5 – 1,0mm2) 8 (4,3mm) 25 83-2131 — — (0,5 – 1,0mm2) 0.157
0.157 8 (4,3mm) 25 83-7121 — —
10 (5,3mm) (4,0mm) 25 83-2141 — — (4,0mm)
10 (5,3mm) 25 83-7131 — —
1/4 (6,4mm) 25 83-2151 — —
16 – 14 AWG 6 (3,7mm) 25 83-2221 — — 16 – 14 AWG 6 (3,7mm) 25 83-7151 — —
(1,5 – 2,5mm2) 8 (4,3mm) (1,5 – 2,5mm2) 0.177
0.177 25 83-2231 — — 8 (4,3mm) 25 83-7161 1,000 84-7161
(4,5mm)
10 (5,3mm) (4,5mm) 25 83-2241 1,000 84-2241 10 (5,3mm) 25 83-7171 1,000 84-7171
1/4 (6,4mm) 25 83-2251 — — 12 – 10 AWG 6 (3,7mm) 25 83-7201 — —
WIRE TERMINATION

12 – 10 AWG 8 (4,3mm) 25 83-2331 — — (4,0 – 6,0mm2) 8 (4,3mm) 25 83-7211 — —

0.248
(4,0 – 6,0mm2) 10 (5,3mm) 25 83-2341 1,000 84-2341
0.248 10 (5,3mm) (6,3mm) 25 83-7221 500 84-7221
1/4 (6,4mm) (6,3mm) 25 83-2351 — — 1/4 (6,4mm) 25 83-7231 — —
5/16 (8,4mm) 25 83-2361 — —
75°C/600 Volts max. Cu
3/8 (10,5mm) 25 83-2371 — —
only
75°C/600 Volts max. 774A Listed
Pressure Wire Connector

Non-Insulated
Ring Terminals Vinyl Insulated Snap Spade Terminals
Max. Wire
Wire Range Stud Size
Wire Range Stud Size Qty. Part No. Qty. Part No. Ins. Dia. Qty. Part No.
8 (4,3mm) 25 83-0131 — — AWG In. In.
22 – 18 AWG
(0,5 – 1,0mm2) 10 (5,3mm) 25 83-0141 — — 22 – 18 AWG 6 (3,7mm) 25 83-7011
6 (3,7mm) 25 83-0221 — — (0,5 – 1,0mm2) 0.134
16 – 14 AWG 8 (4,3mm) 25 83-7021
8 (4,3mm) 25 83-0231 — — (4,0mm)
(1,5 – 2,5mm2) 10 (5,3mm) 25 83-7031
10 (5,3mm) 25 83-0241 1,000 84-0241
16 – 14 AWG 6 (3,7mm) 25 83-7051
8 (4,3mm) 25 83-0331 — — (1,5 – 2,5mm2) 0.161
12 – 10 AWG 8 (4,3mm) 25 83-7061
(4,0 – 6,0mm2) 10 (5,3mm) 25 83-0341 1,000 84-0341 (4,5mm)
10 (5,3mm) 25 83-7071
1/4 (6,4mm) 25 83-0351 — —
12 – 10 AWG 8 (4,3mm) 25 83-7081
10 (5,3mm) 25 83-0421 500 84-0421
(4,0 – 6,0mm2) 0.248
8 AWG 1/4 (6,4mm) 25 83-0431 — — 10 (5,3mm) 25 83-7091
(6,0mm)
(8,0mm2) 5/16 (8,4mm) 25 83-0441 — —
1/4 (6,4mm) 25 83-7101
3/8 (10,5mm) 25 83-0451 — —
75°C/600 Volts max.
10 (5,3mm) 20 83-0511 — — Cu
6 AWG 1/4 (6,4mm) 20 83-0521 — — only
774A Listed
(14,0mm2) 5/16 (8,4mm) 20 83-0531 — — Pressure Wire Connector
3/8 (10,5mm) 20 83-0541 — — Non-Insulated Spade
4 AWG 1/4 (6,4mm) 20 83-0611 — — Terminals
(22,0mm2) 5/16 (8,4mm) 20 83-0621 — —
Max. Wire Part Part
3/8 (10,5mm) 20 83-0631 — — Wire Range Stud Size Qty. Qty.
Ins. Dia. No. No.
105°C/600 Volts max. 6 (3,7mm) 25 83-6111 — —
Cu
only 22 – 18 AWG 8 (4,3mm) 0.157 25 83-6121 — —
774A Listed (0,5 – 1,0mm2) (4,0mm)
Pressure Wire Connector 10 (5,3mm) 25 83-6131 — —
16 – 14 AWG 8 (4,3mm) 0.177 25 83-6161 — —
(1,5 – 2,5mm2) 10 (5,3mm) (4,5mm) 25 83-6171 1,000 84-6171
8 (4,3mm) 25 83-6211 — —
12 – 10 AWG 0.248
10 (5,3mm) 25 83-6221 — —
(4,0 – 6,0mm2) (6,3mm)
1/4 (6,4mm) 25 83-6231 — —
105°C/600 Volts max. Cu
only
774A Listed
Pressure Wire Connector

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 3 0
WIRE TERMINATION

Disconnects
Vinyl Insulated Female Disconnects Nylon Fully-Insulated Female Disconnects

WIRE TERMINATION
Max. Wire Max.
Wire Range Tab Size Qty. Part No. Qty. Part No. Part Part
Ins. Dia. Wire Range Tab Size Wire Qty. Qty.
No. No.
22 – 18 AWG .110 x .020 Ins. Dia.
25 83-9511 — —
(0,5 – 1,0mm2) (2,8mm x 0,5mm) 22 – 18 AWG
.187 x .020 0.150 (0,5 – 1,0mm2) .250 x .032 0.150
25 83-9541 — — 25 83-9771 1,000 84-9771
(4,75mm x 0,5mm) (3,8mm) (6,35mm x 0,8mm) (3,8mm)
.250 x .032
25 83-9571 — — 16 – 14 AWG
(6,35mm x 0.8mm)
16 – 14 AWG (1,5 – 2,5mm2) .250 x .032 0.185
.110 x .020 25 83-9781 1,000 84-9781
(1,5 – 2,5mm2) (2,8mm x 0,5mm) 25 83-9521 — — (6,35mm x 0,8mm) (4,7mm)

.187 x .020 0.185

25 83-9551 — — 12 – 10 AWG
(4,75mm x 0,5mm) (4,7mm)
(4,0 – 6,0mm2) .250 x .032 0.244
.250 x .032 25 83-9791 500 84-9791
25 83-9581 500 84-9581 (6,35mm x 0,8mm) (6,2mm)
(6,35mm x 0.8mm)
14 – 12 AWG 105° C/300 Volts max.
(2,5mm – .250 x .032 0.244 Cu
25 83-9591 — — t only
4,0mm2) (6,35mm x 0.8mm) (6,2mm)
774A Listed
Pressure Wire Connector
12 – 10 AWG
(4,0 – 6,0mm2) .250 x .032 0.244
Nylon Fully Insulated Male Disconnects
25 83-9601 500 84-9601
(6,35mm x 0.8mm) (6,2mm) Max.
Wire Part
Tab Size Wire Qty. Part No. Qty.
Range No.
75°C/600 Volts max. Ins. Dia.
Cu
only 22 – 18 AWG
774A Listed
(0,5 – 1,0mm2) .250 x .032 0.150
25 83-9911 500 84-9911
Vinyl Insulated Male Disconnects Pressure Wire Connector (6,35mm x 0,8mm) (3,8mm)

Max. Wire 16 – 14 AWG

Wire Range Tab Size Qty. Part No.
Ins. Dia. (1,5 – 2,5mm2) .250 x .032 0.185
25 83-9921 500 84-9921
22 – 18 AWG (6,35mm x 0,8mm) (4,7mm)
(0,5 – 1,0mm2) .250 x .032 0.150
25 83-9971
(6,35mm x 0,8mm) (3,8mm) 12 – 10 AWG
(4,0 – 6,0mm2) .250 x .032 0.244
25 83-9931 500 84-9931
16 – 14 AWG (6,35mm x 0,8mm) (6,2mm)
(1,5 – 2,5mm2) .250 x .032 0.185
25 83-9981
(6,35mm x 0,8mm) (4,7mm) 105° C/300 Volts max. Cu
only
12 – 10 AWG
774A Listed
(4,0 – 6,0mm2) .250 x .032 0.244 Pressure Wire Connector
25 83-9991
(6,35mm x 0,8mm) (6,2mm) Vinyl Insulated Bullet Disconnects
Max. Wire
75°C/300 Volts max. Wire Range Qty. Part No.
Cu Ins. Dia.
only 22 – 18 AWG
Non-Insulated 774A Listed
Pressure Wire Connector
(0,5mm – 1,0mm2) 0.150 (3,8mm) 25 83-8001
Female Disconnects
Wire Range Tab Size Qty. Part No. 16 – 14 AWG
(1,5 – 2,5mm2)
22 – 18 AWG .110 x .020 0.185 (4,7mm) 25 83-8011
25 83-9411
(0,5 – 1,0mm2) (2,8mm x 0,5mm)
16 – 14 AWG .110 x .020 75°C/300 Volts max.
25 83-9421 Cu
(1,5 – 2,5mm2) (2,8mm x 0,5mm) only
774A Listed
22 – 18 AWG .187 x .020 Pressure Wire Connector
25 83-9441
(0,5 – 1,0mm2) (4,75mm x 0,5mm) Vinyl Fully-Insulated Receptacles
16 – 14 AWG .187 x .020 Max. Wire Ins.
25 83-9451 Wire Range Qty. Part No.
(1,5 – 2,5mm2) (4,75mm x 0,5mm) Dia.
22 – 18 AWG .250 x .032 22 – 18 AWG
25 83-9471
(0,5 – 1,0mm2) (6,35mm x 0,8mm) (0,5mm – 1,0mm2) 0.150 (3,8mm) 25 83-8101
16 – 14 AWG .250 x .032
25 83-9481
(1,5 – 2,5mm2) (6,35mm x 0,8mm)
16 – 14 AWG
12 – 10 AWG .250 x .032 (1,5 – 2,5mm2)
25 83-9501 0.185 (4,7mm) 25 83-8111
(4,0 – 6,0mm2) (6,35mm x 0,8mm)
105° C/300 Volts max. Not UL Listed.
75°C/300 Volts max.
Cu
only
774A Listed
Pressure Wire Connector
A- 3 1 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
Disconnects Splices
Vinyl Insulated Multi-Stack Disconnects Tap Splices
Max. Wire Wire Range Color Qty. Part No. Qty. Part No.
Wire Range Tab Size Qty. Part No.
Ins. Dia. 22 – 18 AWG
22 – 18 AWG (0,5 – 1,0mm2) Red 25 83-3261 250 84-3261
(0,5 – 1,0mm2) .250 x .032 0.15
25 83-9611
(6,35mm x 0,8mm) (3,8mm)
16 – 14 AWG
(1,5 – 2,5mm2) Blue 25 83-3271 — —
16 – 14 AWG
(1,5 – 2,5mm2) .250 x .032 0.185
25 83-9621 12 – 10 AWG
(6,35mm x 0,8mm) (4,7mm)
(4,0 – 6,0mm2) Yellow 25 83-3281 — —
12 – 10 AWG
(4,0 – 6,0mm2) .250 x .032 0.244
25 83-9631 75°C/600 Volts max.
(6,35mm x 0,8mm) (6,2mm) Cu
only
Vinyl Insulated 774A Listed
75°C/300 Volts max. Cu Parallel Splices Pressure Wire Connector

only
774A Listed Wire Range Max. Wire Ins. Dia. Qty. Part No.
Pressure Wire Connector
22 – 18 AWG
Non-Insulated Flag Female (0,5 – 1,0mm2) 0.157
25 83-9351
Disconnects (4,0mm)

16 – 14 AWG
Wire Range Tab Size Qty. Part No. Qty. Part No. 0.177
(1,5 – 2,5mm2) 25 83-9361
16 – 14 AWG (4,5mm)
(1,5 –2,5mm2) 0.250 x .032
25 83-9401 500 84-9401 12 – 10 AWG
(6,35mm x 0,8mm)
(4,0 – 6,0mm2) 0.248
25 83-9371
(6,3mm)
105°C/300 Volts max. Not UL Listed.
75°C/600 Volts max.
Cu
Adapter - Male to Female (2-1) only
774A Listed
Pressure Wire Connector
Tab Size Qty. Part No.
0.250 x .032
Non-Insulated
(6,35mm x 0,8mm) Butt Splices
25 83-9801
Wire Range Qty. Part No. Qty. Part No.
22 – 18 AWG (0,5 – 1,0mm2) 25 83-9001 — —
105° C/300 Volts max. Not UL Listed. 16 – 14 AWG (1,5 – 2,5mm2) 25 83-9011 — —
12 – 10 AWG (4,0 – 6,0mm2) 25 83-9021 500 84-9021
Vinyl Insulated Butt Splices 8 AWG (8,0mm2) 25 83-9031 250 84-9031
Max. Wire 6 AWG (14,0mm2) 20 83-9041 — —
Wire Range Qty. Part No. Qty. Part No.
Ins. Dia. 4 AWG (22,0mm2) 20 83-9051 — —
22 – 18 AWG 105° C/600 Volts max. Not UL Listed.
(0,5 – 1,0mm2) 0.157
25 83-9281 1,000 84-9281
(4,0mm) Non-Insulated Parallel Splices
16 – 14 AWG Wire Range Qty. Part No. Qty. Part No.
(1,5 – 2,5mm2) 0.177
25 83-9291 1,000 84-9291
(4,5mm) 22 – 18 AWG (0,5 – 1,0mm2) 25 83-9071 — —

12 – 10 AWG 16 – 14 AWG (1,5 – 2,5mm ) 2

25 83-9081 1,000 84-9081
(4,0 – 6,0mm2) 0.248
25 83-9301 500 84-9301 12 – 10 AWG (4,0 – 6,0mm2) 25 83-9091 1,000 84-9091
(6,3mm)

105° C/600 Volts max. Not UL Listed.

75°C/600 Volts max. Cu
only
774A Listed
Pressure Wire Connector

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 3 2
WIRE TERMINATION

Pre-Insulated Crimp Connectors Set Screw Wire Connectors

WIRE TERMINATION
• Eliminates need for re-stripping wire each
time connection is disturbed
• Solid brass sleeves
• Set-screw easily and securely applies maximum
compression to conductors to ensure a vibration-
• Compact design fits easily into tight locations resistant splice
• Flared skirt protects against turned-back strands • Permits fast visual inspection of splice
• Beveled opening eases wire entry • Tough, flame-retardant shell rated at 150°C (302°F)
• Tough UL 94V-2 flame-retardant shell rated at • UL Listed to 486C and CSA Certified
105°C (221°F) to C22.2 #188; comply with Federal
Specification W-S-610E
Model Wire Combination Range Quantity Part No.
Carton of Model Wire Combination Range Quantity* Part No.
600V* 30-245
1,000 300V Box of 100 30-210
48 Min. 2 #22 22 to 10 AWG
Max. 1 #14 w/2 #18 Keg of 10 Carton of
30-645 Min. 1 #20 w/1 #22 – Max. 2 30-310
10,000 #14 w/1 #16 1,000
Carton of 600V Box of 100 30-211*
600V* 30-249
1,000 22 to 10 AWG
49 Min. 1 #22 w/1 #18 11 Carton of
Min. 1 #14 w/1 #20 – Max. 3 30-311*
Max. 1 #12 w/1 #16 Keg of #14 w/2 #18 1,000
30-649
10,000
600V Box of 100 30-222*
Carton of 20 to 10 AWG
600V* 30-148 22 Carton of
1,000 Min. 1 #16 w/3 #18 – Max. 2 30-322*
NC-8 Min. 4 #16 #10 w/1 #12 1,000
Max. 1 #12 w/4 #14 Keg of
30-648 *Package includes (1) K-2422 Set Screw Holder.
5,000
Carton of
600V* 30-146
1,000
NC-2212** Min. 2 #22
Max. 5 #18 Keg of
10,000
30-646 Set Screw Holder
*1,000V maximum in fixtures and signs. • Convenient tool for holding
Note: Connectors are transparent. **Stranded and tightening set-screw connectors
wires only.
• Accepts IDEAL Models 11 and 22 set-screw connectors

High-Temp Pre-Insulated Description Part No.

Crimp Connectors For Connector Models 11 & 22 K-2422

All of the same features as the

Pre-Insulated Crimp Connectors, plus:
• Black, nylon shell designed to
withstand extreme heat build-up
found in high-wattage light fixtures
and signs.
• UL Listed to 150°C (302°F)

Model Wire Combination Range Quantity Part No.

600V* Keg of
49HT 30-849
Min. 1 #22 w/1 #18 10,000
*1000V maximum in fixtures and signs.

A- 3 3 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
TERMINAL STRIPS
IDEAL Terminal and Barrier Strips are designed and manufactured to be rugged, reliable and easy to use. A thermoplastic
base and corrosion-resistant screws and hardware provide extended service life. Optional accessories provide convenient,
versatile application. Available in a wide variety of circuit configurations, electrical ratings and center-spacing, there is an
IDEAL terminal strip for virtually every job.
• Heavy-duty, corrosion-resistant screws, surface plates and optional hardware
• Accessory hardware provides a variety of termination options
• Rugged polyester thermoplastic base (UL Rated 94V-0)
• Operating temperature rated from 130°C (260°F) to -40°C (-40°F)
• UL Recognized (E82048) and CSA Certified (LR15364)

89-200 Series Terminal Strips 89-300 Series Terminal Strips

• .562 in. (14.28mm) center spacing • .375 in. (9.52mm) center spacing
• Accepts wire sizes from • Accepts wire sizes from
10 through 22 AWG Cu 14 through 22 AWG Cu
•  #8-32 Philslot, zinc-plated • #6-32 Philslot, zinc-plated steel
steel terminal screws terminal screws
• Recommended torque: 16 in. - lb. • Recommended torque: 9 in. - lb.

Dimensions (Inches) Dimensions (Inches)

No. of Poles Part No. No. of Poles Part No.
A B A B
2 2.13 1.69 89-202 2 1.40 1.12 89-302
3 2.69 2.25 89-203 4 2.16 1.88 89-304
4 3.25 2.81 89-204 6 2.90 2.62 89-306
6 4.37 3.94 89-206 8 3.66 3.38 89-308
8 5.50 5.06 89-208 10 4.40 4.12 89-310
10 6.62 6.19 89-210 12 5.16 4.88 89-312
12 7.75 7.31 89-212 Ratings: 30A/300V UL Listed, 20A/150V CSA Certified (15A/125V when
used with optional quick connects).
Ratings: 30A/600V UL Listed, CSA Certified (30A/250V when used with
optional quick connects).

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 3 4
WIRE TERMINATION

89-400 Series Terminal Strips 89-500 Series Terminal Strips

• .437 in. (11.10mm) center spacing
• Accepts wire sizes from
12 through 22 AWG Cu
•  #6-32 Philslot, zinc-plated
steel terminal screws
• Recommended torque: 9 in. - lb.
• Available in standard or shorting block styles
• .625 in. (15.88mm) center spacing
• Accepts wire sizes from 6 through 22 AWG Cu
•  #10-32 Philslot, nickel-plated brass terminal
screws
• Recommended torque: 20 in. - lb.

Dimensions (Inches)
No. of Poles Part No.
A B
2 1.63 1.31 89-402
4 2.51 2.18 89-404
6 3.38 3.06 89-406
8 4.25 3.93 89-408
Dimensions Standard Shorting
10 5.13 4.81 89-410 No. of (Inches) Block Block
Poles
12 6.00 5.68 89-412 A B Part No. Part No.
Ratings: 30A/300V UL Listed, CSA Certified.
4 3.75 2.87 89-504 89-505

6 5.00 4.12 89-506 89-507
Jumpers
8 6.25 5.37 89-508 89-509
12 8.75 7.87 89-512 89-513
Ratings: 60A/600V UL Listed, CSA Certified (Max. rating achieved with
#6 AWG Cu wire crimped to ring terminals)
• Provides easy connection of multiple circuits

Over Flat
For use Center Flat
w/ Terminal Spacing Qty. Slip-on
Barrier
12-Circuit Quick Connects
Slip-on
Strip Series (in.) Part No. Part No.
Part No.
10 89-229 89-224 —
89-200 .562
100 89-230 — —
• Allows fast, flexible circuit changes
10 89-323 89-324 —
89-300 .375 Flat-
100 89-330 — — For use w/ Terminal Tab Size Flat-Flat
Qty. None
Strip Series (in.) Part No.
10 89-423 89-424 — Part No.
89-400 .437
100 89-430 — — 89-300 .187 x .020 10 89-314 89-317
89-500 .625 2 — — 89-525 89-200 & 89-400 .250 x .031 10 89-414 89-417

A- 3 5 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
BARRIER STRIPS
• Recessed screws and tubular contacts provide added safety and help
prevent short circuits
• Tubular contacts connect stripped, un-terminated solid or stranded
wire directly to each contact
• Integrated wire protectors prevent twisting and breakage of stranded
wire during connection
• Modular 12-circuit design can be cut into smaller sections, or stacked
end-to-end
• Rugged nylon construction, UL 94V2
• Operating temperature rated to 105°C (221°F)

No. of Torque Dimensions (Inches)

Electrical Ratings Wire Range Part No.
Circuits in.- lb. A B C D E F*
20A/300V UL
22 - 12 AWG 12 3.5 3.787 0.669 0.570 0.315 0.114 0.110 89-608
20A/600V CSA
30A/300V UL 22 - 10 AWG
12 4.4 4.626 0.795 0.670 0.394 0.142 0.134 89-610
30A/600V CSA 22 - 12 AWG
35A/300V UL/CUL 22 - 10 AWG 12 7.0 5.540 0.937 0.748 0.472 0.154 0.154 89-612
50A/300V UL/CUL 20 - 8 AWG 12 12.0 6.220 1.008 0.992 0.531 0.173 0.189 89-614 
*Plus or minus .004 in. ®

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 3 6
WIRE TERMINATION

INSULATION CONNECTORS
B-TAP® Insulation Piercing Connectors
Safe, dependable and easy. The Buchanan B-TAP® Insulation Piercing Connector offers
a breakaway torque nut that guarantees a perfect connection every time, no more
guesswork. It simply snaps off when UL torque requirements are met. The grease-filled
rubber end caps provide superior water and corrosion resistance, while the insulation-
piercing design eliminates downtime and power interruptions.
That translates into a 60% installed cost savings compared to split bolts. Installation is
easy; all you need is a standard socket or wrench. B-TAP® Connectors can be safely
installed on energized systems, eliminating power interruptions and downtime.
B-TAP® Connectors...EASY AS 1, 2, 3.
1. Select proper B-TAP® connector.
2. Position cables. No need to turn off power.
3. Tighten breakaway torque nut with a standard socket or wrench.
To determine the most appropriate B-TAP® connector for a specific main and tap
combination, see chart.

Wire Range Chart

Wire Size
Part No. 14 12 10 8 6 4 3 2 1 1/0 2/0 3/0 4/0 250 300 350 400 500 750

Main: 1/0 - 8
BTC1/0-10
Tap: 2 - 10
Main: 2/0 - 4
BTC2/0-14
Tap: 10 - 14
Main: 4/0 - 2
BTC4/0-12
Tap: 4/0 - 4
Main: 4/0 - 3
BTC4/0-10
Tap: 2 - 10
Main: 4/0 - 2
BTC4/0-6
Tap: 2/0 - 6
Main: 250 - 1
BTC250-4
Tap: 4/0 - 4
Main: 350 - 1/0
BTC350-1/0
Tap: 350 - 1/0
Main: 500 - 2/0
BTC500-4
Tap: 4/0 - 4
Main: 500 - 4/0
BTC500-1/0
Tap: 350 - 1/0
Main: 750 - 3/0
BTC500-14
Tap: 10 - 14
Main: 750 - 250
BTC750-250
Tap: 500 - 250
Full-line is 600V dual-rated, 194°F (90°C)

Conductor Range Socket Size

Voltage Rating Torque (In. Lbs.) No. of Bolts Part No.
Run Tap (Inches)

1/0-8 2-10 1 600V 1/2 80 1 BTC1/0-10

2/0-4 10-14 2
600V 1/2 80 1 BTC2/0-14
4/0-2 4/0-4 600V 1/2 160 1 BTC4/0-2
4/0-3 2-10 3
600V 1/2 125 1 BTC4/0-10
4/0-2 2/0-6 600V 1/2 160 1 BTC4/0-6
250-1 4/0-4 600V 1/2 160 1 BTC250-4
350-1/0 350-1/0 600V 5/8 330 2 BTC350-1/0
500-2/0 4/0-4 600V 5/8 330 2 BTC500-4
500-4/0 350-1/0 600V 5/8 330 2 BTC500-1/0
750-3/0 10-144 600V 1/2 80 1 BTC500-14
750-250 500-250 600V 5/8 330 2 BTC750-250
1
Tap #2 - #10 Cu solid/stranded; #2 - #10 Al stranded 3
Tap #2 - #10 Cu solid/stranded; #2 - #8 Al stranded
2
Tap #10 - #14 Cu solid/stranded; #10 - #14 Al stranded 4
Tap #10 - #14 Cu solid/stranded; #10 - #12 Al stranded
LISTED

A- 3 7 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
 WIRE TERMINATION
WIRE CONNECTOR SAMPLE PACKS

TWIST-ON ®
WIR E CO N N EC TO RS
Comfort & Performance.
TWISTER
WIR E CO N N EC TO RS
WING-NUT
WIR E CO N N EC TO RS
®

Comfortable Swept Wing High-Leverage Wing

• Swept wings offer more comfort, extra leverage, • Contoured wing design provides extra leverage
and less effort on large combinations for superior torque
• Polypropylene shell expands for smooth, • Expanding, live-action spring expands to
progressive tightening providing dependable accommodate a wide range of wire sizes and
connections combinations
• Co-polymer shell expands for smooth, progressive
• Expanding, live-action spring provides quick tightening providing dependable connections
take-up on even the toughest combinations • Removable for repeat usage on same size or larger
• Hexagonal shape accommodates standard nut
driver for easy installation

P-5305 P-5306 P-5307

®
powerplug® ® IN-SURE PUSH-IN
SPLICELINE
IN - LIN E WIR E CO N N EC TO RS
WIR E CO N N EC TO RS
STRIP. PUSH. CONNECT
• High quality, secure connections
• Crimp-free, push-in butt splice • Clear shell gives visual verification of
• Low insertion force for fast connections connection
• Easily passes through 1/2 in. knockouts • Ergonomic design for easy grip and
• End-to-end connection ideal for pre-fab comfort
operations • Low insertion force for fast connections
• Transparent polycarbonate window for visual • Fits any combination of #18 - 12 AWG solid and
inspection of connection stranded copper wires.
• Wide wire range of 20-12 AWG solid, 16-12 AWG
stranded
• Made in U.S.A.

POWERPLUG®
LU MIN AIRE DISCO N N EC T

75%
FASTER
THAN BUTT SPLICES
NO MORE CRIMPING

P-5004 P-2880 P-2860

Visit us at idealind.com for more information or email us at contactus@idealindustries.com

for a free sample by referencing the P# above.

I D E A L I N D . C O M • 8 0 0 - 4 3 5 - 0 7 0 5 | A- 3 8
 TOOLS &
SUPPLIES
TOOLS & SUPPLIES

PROFESSIONAL QUALITY, INNOVATIVE SOLUTIONS

When it comes to quality, performance and durability, IDEAL is the professional choice for tools, cutting tools, fish
tapes, benders and lubes. THe community of professionals know what it takes to succeed in today’s electrical world
and IDEAL fills those needs with high-quality innovative solutions. The expansion of the IDEAL U.S. manufacturing
and engineering supported by strategic international facilities has been providng professional electricians with
quality tools since 1916.

WIRE FISHING TOOL CARRIERS/POUCHES

Fish Tapes...........................................................................B-4 Leather..................................................................................B-48
Wire Pulling Lubricants............................................B-9 Backpack.............................................................................B-49
Pulling Supplies.............................................................B-12 Fabric......................................................................................B-50

CONDUIT BENDERS T O O L K I T S .............................................................................B-51

Iron / Aluminum............................................................B-15
CUTTING SUPPLIES
WIRE STRIPPER/CUTTERS Drill Taps..............................................................................B-55
Wire Strippers..................................................................B-17 Hole Cutters......................................................................B-56
Wire Cutters.......................................................................B-18 Hole Saws............................................................................B-58
Flex Bits.................................................................................B-61
P L I E R S .........................................................................................B-22
Wood Boring Bits..........................................................B-62
HAND TOOLS Step Bits...............................................................................B-64
Knives.....................................................................................B-24 Augers....................................................................................B-65
Saws........................................................................................B-24 Recip Blades.....................................................................B-66
Levels......................................................................................B-25
WIRE MANAGEMENT
Crimp......................................................................................B-26
Cable Tie Tools.................................................................B-69
CABLE CUTTERS Cable Ties............................................................................B-70
PowerBlade™ Cable Cutters................................B-27 Staples...................................................................................B-76
Ratcheting and Long Arm.....................................B-28 Wire Markers.....................................................................B-77
Switches...............................................................................B-78
SCREWDRIVERS
Multi-Bit................................................................................B-30 H E AT S H R I N K
Twist-a-Nut™ Screwdrivers/Nut Drivers.......B-31 Thermo-Shrink® Heat Shrink................................B-85
Cushioned-Grip..............................................................B-33 Heat Guns...........................................................................B-89
Nutdrivers............................................................................B-36
L O C K O U T / TA G O U T
I N D U S T R I A L B I T S ......................................................B-38 Kits............................................................................................B-91
Breaker Lockouts...........................................................B-95
I N S U L AT E D TO O L S
Padlocks...............................................................................B-98
Kits / Sets.............................................................................B-42
Tags..........................................................................................B-98
Nut Drivers..........................................................................B-44
Signs........................................................................................B-99
Screwdrivers......................................................................B-44
Tapes.......................................................................................B-100
Fuse Pullers........................................................................B-46

B-1 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

 TOOLS & SUPPLIES
PLIERS
Page B-21

IDEALIND.COM • 800-435-0705 | B-2

 WIRE FISHING
Type

TOOLS & SUPPLIES

• Laser etched in 12 in. increments to provide • Laser etched in 12 in. increments to provide
instant conduit length instant conduit length
• Stiffer for long runs • Tensile strength 1,600 lbs.
• Highest grade carbon steel
TOOLS & SUPPLIES

• Tensile strength 1,600 lbs.

• Non-conductive fiberglass tape for use around

live circuits • Non-conductive tape for use around live circuits
• Omni-directional pushing • Pulling strength 350 lbs.
• 3 tip choices - leader, metal eyelet and
non-conductive eyelet
• Pulling strength 500 lbs.

• Brass-plated coiled steel

• 19 strands of stainless steel
• Kink proof
• Ultra hard nylon jacket adds
• Tensile strength 700 lbs.
slipperiness, protects
cables and user’s hands
• Pulling strength 1,000 lbs.

Cases
Tuff-Grip™ Pro Rapid-Pak® Thumb Winder™
• Durable case takes • Inner rotating reel • Convenient 7 in.
up to 20 ft. drop with winding size for easy tool
without breaking knob for increased bag storage
• Full-perimeter labor savings • Durable impact
handle band helps • Funneled tape resistant ABS
keep dirt and opening reduces case
moisture out kinking and tape • Easy-to-use
• Superior pull-out and rewind breakage thumb-operated
characteristics • Reversible, hinged rewind
knob for right or left
handed rewinds

WARNING
Always use approved safety glasses when using this product. Do not use near energized equipment. Electrical shock may occur. Make sure all
power is off. Do not use pliers or other tools that may kink, damage, or weaken any round fish tapes such as S-Class®, Nylon or Zoom™. Use only a
fish tape puller designed for this purpose. While fish tapes made of fiberglass, nylon or other composite materials are non-conductive, they may
have a metal eyelet that is conductive and could be grounded against conduit. Do not use on live electrical circuits. Do not attempt to use fish
tape that is fractured or has multiple ends. Keep the fish tape wound in the reel to prevent damage to the tape. Use this product in a safe work
position to prevent loss of balance. Never remove the screws from case while fish tape is coiled inside the reel. Failure to follow instructions may
result in severe bodily harm or damage to property.

B-3 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Blued-Steel™ Fish Tapes
• Laser etched in 12 in. increments
to provide instant conduit length
• High column strength for longer
runs
• Non-oily finish resists rust

Length Width & Case Replacement

End Type Tuff-Grip™ Pro Thumb-Winder™
(ft.) Thickness Diameter Tapes (No Case)
25 1/8 in. x .045 in. 7 in. Formed hook – 31-012 –
50 1/8 in. x .045 in. 7 in. Formed hook – 31-010 –

TOOLS & SUPPLIES

50 1/8 in. x .060 in. 9 in. Formed hook 31-033 – 31-004
60 1/8 in. x .060 in. 12 in. Formed hook 31-055 – 31-035
120 1/8 in. x .060 in. 12 in. Formed hook 31-056 – 31-036
240 1/8 in. x .060 in. 12 in. Formed hook 31-057 – 31-038
50 1/4 in. x .060 in. 12 in. Formed hook 31-059 – 31-051
100 1/4 in. x .060 in. 12 in. Formed hook 31-058 – 31-050
200 1/4 in. x .060 in. None Formed hook – – 31-052
400 1/4 in. x .060 in. None Formed hook – – 31-2128
— 1/4 in. x .060 in. None Formed hook – – 31-2982*
*Bulk roll 750 lbs. (approximately 12,000 ft.)

Stainless Steel Fish Tapes

• Laser etched in 12” increments to provide
instant conduit length
• Tape will not rust or corrode in humid
environments
• Stainless steel design provides a
smooth pay-out

Replacement Tape
Length (ft.) Width & Thickness Case Diameter End Type Tuff-Grip™ Pro
(No Case)
120 1/8 in. x .060 in. 12 in. Formed hook 31-066 ­—
240 1/8 in. x .060 in. 12 in. Formed hook 31-067 31-074

Volt-Guard Fish Tapes

• Light-duty non-conductive tape for
use around live circuits
• Elliptical design gives the Volt-Guard
greater pushing power
• Repair kit available, order #31-541

Replacement Tapes
Length (ft.) Width & Thickness Case Diameter End Type Tuff-Grip™ Pro
(No Case)
60 3/16 in. x .094 in. 12 in. Non-Conductive Eyelet 31-542 31-552
120 3/16 in. x .094 in. 12 in. Non-Conductive Eyelet 31-544 31-554

IDEALIND.COM • 800-435-0705 | B-4

 S-Class® Fiberglass Fish Tapes
• Non-conductive tape for use
around live circuits
• Structural glass core provides a
more durable fiberglass tape
• Fiberglass cone with nylon outer
jacket provides durability

Case Replacement Tapes

Length (ft.) Diameter End Type Tuff-Grip™ Pro Rapid-Pak®
Diameter (No Case)
50 3/16 in. 12 in. Leader 31-060 31-187 31-150
TOOLS & SUPPLIES

50 3/16 in. 12 in. Metal Eyelet 31-062 31-190 31-160

50 3/16 in. 12 in. Non-Conductive Eyelet 31-086 – 31-200
100 3/16 in. 12 in. Leader 31-061 31-186 31-152
100 3/16 in. 12 in. Metal Eyelet 31-063 31-189 31-162
100 3/16 in. 12 in. Non-Conductive Eyelet 31-087 – 31-201
200 3/16 in. 16 in.* Leader 31-064 31-207 31-155
200 3/16 in. 16 in.* Metal Eyelet 31-065 31-208 31-165
200 3/16 in. 16 in.* Non-Conductive Eyelet 31-088 – 31-202
*Traditional handle

Zoom™ Fish Tapes

• Great for hard to navigate conduit with multiple
bends
• Nylon jacket protects the stainless steel core
while adding to the slipperiness of Zoom™

Replacement Tapes
Length (ft.) Diameter Case Diameter End Type Tuff-Grip™ Pro
(No Case)
50 3/16 in. 12 in. Metal Eyelet 31-090 31-091
100 3/16 in. 12 in. Metal Eyelet 31-092 31-093
200 3/16 in. 16 in.* Metal Eyelet 31-096 —
*Traditional handle

Gold-Fish® Fish Tape

• Ultra-flexible tape for hard-to-
navigate areas
• Brass-plated coils resist rust
• No “memory” – hangs straight after
being coiled for long periods

Replacement Tape
Length (ft.) Diameter Case Diameter End Type Tuff-Grip™ Pro
(No Case)
50 3/16 in. 12 in. Metal Eyelet 31-144 31-141

B-5 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Fish Tape Leaders Fish Tape Swivel Ball

• Guides fish tape around bends in conduit • Swivels to prevent wires from twisting during pull
• Handles up to six 10 AWG bare wires • Designed for use on 1/8 in. steel or stainless steel
tapes
• Pulls up to 500 lbs.
• Eyelet holds up to four 10 AWG bare wires
Description Part No.

TOOLS & SUPPLIES

Fish Tape Leader for steel or stainless steel tapes 31-148 Description Part No.

Fish Tape Leader for S-Class® Fiberglass Fish Tape 31-159 Fish Tape Swivel Ball 31-085

Tuff-Grip™ Pro Accessories Fish Tape Non-Conductive Tip

Replacement Kits

31-203 31-541

• Easy to apply
• Replacement includes: Fish Tape Case (2 halves)
and Handle (1) • Each kit includes two eyelets & adhesive

Description Part No. Description Part No.

Fish Tape Parts Kit KB-0173 Volt-Guard Fish Tape Repair Kit 31-541

Screws (not included, kit requires 4) LA-4218 S-Class Fish Tape Repair Kit
®
31-203
Screws not included, must be ordered separately.

Fish Tape Field Application Repair Kits

• For use on S-Class® & Zoom™ Fish Tapes 31-166
• Crimps on new eyelet or leader in minutes
• Dies can be used with Crimpmaster™ Crimp Tool 31-156
• Connection guaranteed to withstand 500 lbs.
31-158
Description Part No.
Field Application Kit includes: Crimpmaster™ Crimp Tool frame, die set, S-Class eyelets (2), S-Class leaders (2),
® ®
31-156
Zoom™ eyelets (2) & instant adhesive
Die Set Kit includes: eyelets (2), leaders (2) & instant adhesive (for those who already have a Crimpmaster™
31-164
Crimp Tool)
Replacement eyelets (4) for S-Class® Fish Tapes & adhesive 31-158
Replacement leaders (4) for S-Class Fish Tapes & adhesive
®
31-159
Replacement eyelets (2) for Zoom™ Fish Tapes 31-094
Die Set Only (for those who already have a Crimpmaster™ Crimp Tool) 31-166

IDEALIND.COM • 800-435-0705 | B-6

 Tuff-Rod™ Regular Flex Fishing Poles
• Strong, lightweight, flexible extendable fiberglass rod kits
• Use to reach and pull wires over suspended ceilings, in cable trays or through interior walls
• Packaged in clear tubes for protection and long-term storage
• 1/4 in. white fiberglass
• Extra stiffness for added control when maneuvering wires

Description Length Diameter Sections Part No.

Fixed bullet nose and threaded J hook 12 ft. total 1/4 in. 3 ea. 4 ft. 31-611
Fixed bullet nose and threaded J hook 24 ft. total 1/4 in. 4 ea. 6 ft. 31-612
TOOLS & SUPPLIES

Replacement Rods 4 ft. x 12 1/4 in. 12 ea. 4 ft. 31-643

Replacement Rods 6 ft. x 12 1/4 in. 12 ea. 6 ft. 31-644

Tuff-Rod™ Extra Flex Glow Fishing Poles

• Strong, lightweight, flexible extendable fiberglass rod kits
• Use to reach and pull wires over suspended ceilings, in cable GLOWS
trays or through interior walls
• Packaged in clear tubes for protection and long-term storage
• 3/16 in. pale green luminescent fiberglass
• Glow-in-the-dark material for easy use in attics, basements and other dimly lit areas

Description Length Diameter Sections Part No.

Fixed bullet nose and threaded J hook 12 ft. total 3/16 in. 3 ea. 4 ft. 31-631
Fixed bullet nose and threaded J hook 30 ft. total 3/16 in. 5 ea. 6 ft. 31-633
Replacement Rods 4 ft. x 12 3/16 in. 12 ea. 4 ft. 31-647
Replacement Rods 6 ft. x 12 3/16 in. 12 ea. 6 ft. 31-648

Tuff-Rod™ Accessory Kits

• Includes replacement heads: one threaded bullet nose,
one threaded J hook and one threaded whisk

Description Part No.

3/16 in. Accessory Kit 31-651
1/4 in. Accessory Kit 31-652

Ultra smooth gel coat

helps protect hands
from fiberglass

Fiber reinforced composite

pultrusion for consistent
high quality
Crimped edge provides
exceptional “pull-off”
strength for a durable,
long-lasting fishing pole

B -7 | I D E A L E L E C T R I C A L 2 0 1 8 F U L L L I N E C A T A L O G
WIRE LUBRICANTS & ACCESSORIES
Application Selection
Commercial Utility
40°F - 120°F 40°F - 120°F (4°C - 49°C) (indoors/outdoors)
Temperature Range
4°C - 49°C -28°F - 40°F (-33°C - 4°C) (outdoors)
Up to 75 ft. (finished construction)
Length of Run Up to 250 ft.
Up to 1,200 ft. (new construction)
Installation Time 8 hrs. 24 hrs.
ClearGlide (finished construction)
®
Aqua-Gel II & Velocity™ (indoors, outdoors)
®
Best Choice

TOOLS & SUPPLIES

Yellow 77® and Yellow 77® Plus (new construction) Aqua-Gel® CW & IIP (outdoors)

Product Selection
Yellow 77® Aqua-Gel® Aqua-Gel®
ClearGlide® Yellow 77® Aqua-Gel® ll Velocity™
Plus IIP CW
Wire Pulling Wire Pulling Wire Pulling Wire Pulling
Wire Pulling Wire Pulling Wire Pulling
Lubricant Lubricant Lubricant Lubricant
Lubricant Lubricant Lubricant
Color Clear Yellow Yellow Blue Blue Pink Cream
Base Polymer Wax Wax Polymer Polymer Polymer Polymer
Average Coefficient of
.23 .17 .16 .19 .19 .19 .16
Friction*
32°F – 180°F 32°F – 130°F 32°F – 190°F 32°F – 180°F 32°F – 180°F -28°F – 190°F 40°F – 140°F
Stability Range
(0°C – 82°C) (0°C – 54°C) (0°C – 88°C) (0°C – 82°C) (0°C – 82°C) (-33°C – 82°C) (4°C – 82°C)
Application 40°F – 100°F 40°F – 100°F 40°F – 100°F 40°F – 100°F 40°F – 100°F -28°F – 40°F 25°F – 140°F
Temperature Range (4°C – 38°C) (4°C – 38°C) (4°C – 38°C) (4°C – 38°C) (4°C – 38°C) (-33°C – 4°C) (-3.9°C – 60°C)
Compatibility (Cable Types):
Rubber l l l l l l l

Neoprene l l l l l l l

Nylon l l l l l l l

PVC l l l l l l l

High-density or cross- l l l l l l l
linked polyethylene
Low-density l l l l l l
polyethylene
Semiconducting jacket l l l l l l

Hypalon l l l l l l l

*Results from NEETRAC, an independent testing laboratory affiliated with The Georgia Institute of Technology.

Recommended Qty. of Lubricant Formula

Q = .0015 x L X D This formula is used as a guideline on estimating
Q = Quantity of recommended lube in gallons the quantity of lube needed for various jobs. Many
L = Length of pull in feet factors go into a cable pull, however, this formula
D = Nominal ID of conduit in inches is just based on length of the pull and diameter of
the conduit. Increase quantities for the following
troubles:
• Stiff, heavy cable • Pulls with several
• Rough, old or dirty bends
conduits • High temperatures
• High percent conduit • Not food grade
fill

IDEALIND.COM • 800-435-0705 | B-8

 Yellow 77® Plus Wire Pulling Lubricant Yellow 77® Wire Pulling Lubricant
• Rapid Glide™ t • The #1 brand of wire
additive provides greater pulling lubricant since
lubricity than other 1959 — the perfect
wax-based lubricants — general purpose lube
great for tough pulls • Wax-based formula
• Safe to use with all provides superior
cable types lubricity
• Clings to cable throughout • Safe to use with most
long runs, even where cable types except
moisture is present low-density polyethylene
• Remains stable in high and semi-conducting
TOOLS & SUPPLIES

temperatures — usable jackets

from 32°F to 190°F (-1°C to 88°C) • Clings to cable throughout
• Dries slowly to a thin, non-conductive film that long pulls, even where moisture is present
won’t harden in conduit • Won’t break down or separate after repeated
• Creamy texture applies easily and uniformly by exposure to freezing temperatures
hand or brush • Dries to a thin, non-conductive film
• Homogeneous blend requires no mixing • Creamy texture applies easily and uniformly by
• Won’t dry out – surface coat forms to control hand or brush
evaporation • Homogeneous blend requires no mixing
• Environmentally safe – non-toxic, non-flammable • Won’t dry out — surface coat forms to control
and non-corrosive evaporation
Description Part No. • Environmentally safe — non-toxic, non-flammable
and non-corrosive
1-qt. Squeeze Bottle 31-398
Description Part No.
1-gal. Bucket 31-391
1-qt. Squeeze Bottle 31-358
5-gal. Bucket 31-395
1-gal. Bucket 31-351
5-gal. Bucket 31-355
LISTED
55-gal. Drum 31-365

ClearGlide® Wire Pulling Lubricant LISTED

• Clear and colorless for quick and easy clean-up — great for indoor and retrofit pulls
• Exceptional lubricity for super-fast pulls
• Polymer-based formula is perfect for all electrical and datacomm applications
• Safe to use with all cable types
• Controlled evaporation rate is ideal for shorter runs
• Remains stable over wide temperature ranges — usable from
32°F to 180°F (0°C to 82°C)
• Dries to a semi-fluid film that won’t clog conduit
• Easy to apply by hand, brush or pump
• Environmentally safe — non-toxic, non-flammable and non-corrosive

Description Part No.

1-qt. Squeeze Bottle 31-388
1-gal. Bucket 31-381
5-gal. Bucket 31-385
55-gal. Drum 31-2143

LISTED

B-9 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Aqua-Gel® II Cable Pulling Lubricant
• Polymer-based formula provides maximum tension reduction in
high-stress electrical and communication cable-pulling operations
• Compatible with most cable types except composite rubber
• Cleans up easily with soap and water
• Clings to cable throughout long pulls
• Remains stable over wide temperature range — usable from
28°F to 180°F (-2°C to 88°C)
• Dries to a semi-fluid film that won’t clog conduit
• Easy to apply by hand, brush or pump

TOOLS & SUPPLIES

• Environmentally safe – non-toxic, non-flammable and non-corrosive
• For outdoor use only

Description Part No.

1-qt. Squeeze Bottle 31-378
1-gal. Bucket 31-371
5-gal. Bucket 31-375
55-gal. Drum 31-3855

LISTED

Aqua-Gel® IIP Cable Pulling Lubricant Aqua-Gel® CW Cable Pulling Lubricant

• Features the same • Features the same excellent
excellent qualities qualities as Aqua-Gel® II
as Aqua-Gel® II Cable Pulling Lubricant with
Cable Pulling a lower temperature range
Lubricant for use outdoors in cold
with a lower weather
viscosity for easy • Polymer-based, cold-
pouring and weather formula remains
pumping stable in storage from
• Pourable formula -28°F to 190°F (-33°C to 82°C)
clings to cable – • Formulated for exterior use
eliminates hand in cold weather conditions
application for a
clean and safe job • Cleans up easily with soap
and water
• Compatible with most cable types, except
composite rubber • Clings to cable throughout long pulls
• Cleans up easily with soap and water • Well-suited for hand or poured applications
• Environmentally safe – non-toxic, non-flammable • Environmentally safe — non-toxic, non-flammable
and non-corrosive and non-corrosive
Description Part No. • Not recommended for indoor use

1-gal. Jug 31-421 Description Part No.

5-gal. Bucket 31-425 1-qt. Squeeze Bottle 31-298

55-gal. Drum 31-435 1-gal. Jug 31-291

5-gal. Bucket 31-295
LISTED

LISTED

IDEALIND.COM • 800-435-0705 | B-10

 Velocity™ Wire Pulling Lubricant Noalox® Anti-Oxidant
• High cling factor • Anti-oxidant compound improves
efficiency and service life of
• Maximum friction aluminum electrical
reduction applications
• Specification grade • Suspended zinc particles
• Compatible with all penetrate and cut
popular cable types aluminum oxide
• Temperature stable • Provides additional inner-
strand and inner-
• Non-combustible conductor current paths
residue for improved conductivity
and cooler connections
TOOLS & SUPPLIES

• Environmentally safe — non-toxic,

non-flammable and non-corrosive LISTED
• Carrier material excludes air to minimize further
oxidation
Description Part No.
• For use with pressure-type wire connectors including
1-qt. Squeeze Bottle 31-276 lugs, taps, service entrances and split-bolts
1-gal. Bucket 31-277 • Reduces galling and seizing when applied on
aluminum conduit joints promoting good
5-gal. Bucket 31-278
ground continuity
LISTED

Duct Seal Description Part No.

• Seals around junction 1/2-oz. Tube 30-024

boxes, flashings and
4-oz. Squeeze Bottle 30-026
service entrances
8-oz. Squeeze Bottle 30-030
• Permanently soft,
non-toxic compound 8-oz. Brush Cap 30-031
can be painted
immediately after 1-gal. Bucket 30-032
application 5-gal. Bucket 30-040
• Won’t adversely affect
55-gal. Drum 30-1216
other plastic materials
or corrode metals LISTED Compatible with aluminum to aluminum and aluminum to copper
connections.
Description Quantity Part No.
1 lb. Block Carton of 10 31-601
5 lb. Block Carton of 10 31-605

Safety Data Sheet

OSHA Hazard Communication Standard
29 CFR 1910.1200. Prepared to GHS Rev 3.

Revision date: Initial version

Date of issue: 04.28.2015

Page: 1/11

®
Trade name: Noalox Anti Oxidant

SECTION 1: Identification

Product identifier: Noalox® Anti Oxidant.

For a Safety Data Sheet

Synonyms: None available.
Product Code Number: 30-024, 30-026, 30-030, 30-031, 30-032, 30-040.
SDS number: ID019
Recommended use: Anti oxidant.
Recommended restrictions: Uses other than those recommended.

on lubricants and other Manufacturer/Importer/Supplier/Distributor information:

Company Name:
Company Address:
IDEAL INDUSTRIES, INC.
Becker Place,
Sycamore, IL 60178

products visit us at
Company Telephone: Office hours (Mon – Fri)
7AM - 5 PM (CDT)
(815)895-5181
Company Contact Name: Darryl Docter.
Company Contact Email: IDEAL@IDEALINDUSTRIES.COM

idealind.com.
Emergency phone number: 24 HOUR EMERGENCY NUMBER:
(815)895-5181.

SECTION 2: Hazard(s) identification

Classification of the chemical in accordance with paragraph (d) of §1910.1200:

Physical hazards
Not classified as a physical hazard under GHS criteria.

Health hazards
Specific target organ toxicity - repeated exposure, Category 1.

Environmental hazards
Acute aquatic toxicity, Category 2.
Chronic aquatic toxicity, Category 2.

GHS Signal word: DANGER.

GHS Hazard statement(s): Causes damage to organs through prolonged or repeated

exposure.
Toxic to aquatic life with long lasting effects.

Revision Date: June 1, 2015 Page 1 of 11

B-11 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Valu-Line™ Pull Line Conduit Measuring Tape
• White with gray tracer • Provides quick and accurate
for easy identification measurement of conduit runs
• Continuous-fiber • Easy-to-read markings
polyline great for in sequential one-foot
blowing directly increments
into conduit
STANDARD • 160 lb. tensile strength
• Will not rot or mildew
DUTY • Pulls rope through raceways
• Can be left in conduit 190 LBS. without stretching
for future use
• Will not rot or mildew

TOOLS & SUPPLIES

Tensile Part Tape
Length Length Part No.
Description Strength No. Description Width

Valu-Line™ Pull-Line 190 lbs. 6,500 ft./ Bucket 31-338 Conduit Measuring Tape 3/16 in. 3,000 ft. 31-347

Powr-Fish® Pull Line 3-in-1 Premise MULETAPE®

• White with blue tracer • Reduces installation
for easy identification time and saves money
on premise jobs
• Continuous-fiber
polyline great for • Blow, measure and pull
blowing directly into with single product
conduit • Imprinted with
• Will not rot or sequential footage
markings THREE
mildew
FUNCTIONS
• Can be left in HEAVY • Fewer installation
steps, significant IN ONE
conduit for DUTY material and labor
future use 210 LBS. savings

Pulling Tape Length/ Part

Description
Tensile Part Strength Width Bucket No.
Length
Description Strength No.
3-in-1 Premise 400 lb. 1/4 in. 4,500 ft. 31-314
Powr-Fish® Pull-Line 210 lbs. 6,500 ft./ Bucket 31-340 MULETAPE® 1,800 lb. 1/2 in. 1,300 ft. 31-315
Powr-Fish® Pull-Line 210 lbs. 500 ft./ Canister 31-348
MULETAPE is a registered trademark of NEPTCO, INC.
®

Powr-Fish® Pull Line

• White with red tracer
for easy identification
• 500 lb. tensile, our
highest tensile-rated
pull-line
• Continuous-fiber
polyline great for
blowing directly
into conduit EXTRA
• Will not rot or mildew HEAVY DUTY
• Can be left in conduit 500 LBS.
for future use

Tensile
Length Part No.
Description Strength
Powr-Fish®
500 lbs. 2,200 ft./ Bucket 31-344
Pull-Line

IDEALIND.COM • 800-435-0705 | B-12

 Foam Carriers Pro-Pull™ Rope
• Attach to a suitable line to • Low-friction polypropylene rope
serve as a piston – clears slides easily through conduit
out water or debris as
• Both rope ends looped
they travel through
conduit • Non-sliver surface can
be handled without

TOOLS & SUPPLIES

• Durable foam construction
gloves
for repeated use and long life
• Will not rot or mildew
• For use with any type of blower or vacuum
system • Rugged, lightweight construction

Description Quantity Part No. Tensile

Length Part No.
TOOLS & SUPPLIES

Description Strength
1/2 in. Foam Carrier 1/bag 31-316
1/4 in. 1,125 lbs. 250 ft./Reel 31-839
3/4 in. Foam Carrier 1/bag 31-317 1/4 in. 1,125 lbs. 600 ft./Reel 31-840
1 in. Foam Carrier 1/bag 31-318 1/4 in. 1,125 Ibs. 1,000 ft./Reel 31-841
3/8 in.† 2,430 lbs. 250 ft./Reel 31-844
1-1/4 in. Foam Carrier 1/bag 31-319 3/8 in.† 2,430 lbs. 600 ft./Reel 31-845
1-1/2 in. Foam Carrier 1/bag 31-320 3/8 in.† 2,430 lbs. 1,200 ft./Reel 31-846
1/2 in.† 3,780 lbs. 250 ft./Reel 31-849
2 in. Foam Carrier 1 31-321
1/2 in.† 3,780 lbs. 600 ft./Reel 31-850
2 in. Foam Carrier 1/bag 31-471 1/2 in.† 3,780 Ibs. 1,200 ft./Reel 31-851
5/8 in.† 5,580 Ibs. 600 ft./Reel 31-853
2-1/2 in. Foam Carrier 1/bag 31-322
5/8 in.† 5,580 Ibs. 1,200 ft./Reel 31-854
3 in. Foam Carrier 1/bag 31-323 3/4 in.† 7,650 lbs. 300 ft./Reel 31-855
3-1/2 in. Foam Carrier 1/bag 31-324 3/4 in.† 7,650 lbs. 600 ft./Reel 31-856
3/4 in.† 7,650 lbs. 1,200 ft./Reel 31-857
4 in. Foam Carrier 1/bag 31-325 †
Eye splice on working end. Tensile strength based on new rope.
5 in. Foam Carrier 1/bag 31-326
6 in. Foam Carrier 1/bag 31-327 Line Packages
• One-piece pull line and
Foam Carriers - Multi-Packs foam tip unwind as they
move through conduit
Description Quantity Part No.
• One-piece construction
1/2 in. Foam Carrier 5/bag 31-466 for fast, easy use with no
knots or foam carriers to
3/4 in. Foam Carrier 5/bag 31-467 retrieve
1 in. Foam Carrier 5/bag 31-468 • Line tensile strength of 17 lbs.
1-1/4 in. Foam Carrier 3/bag 31-469 • For use with any type of blower or vacuum
system
1-1/2 in. Foam Carrier 2/bag 31-470
Description Color Quantity Part No.
Line Package, 1/2 in. x 75 ft. Red 10/bag 31-472
Line Package, 1/2 in. x 75 ft. Red 50/pack 31-328
Line Package, 1/2 in. x 150 ft. Red 10/bag 31-473
Line Package, 3/4 in. x 200 ft. Yellow 5/bag 31-475
Line Package, 3/4 in. x 300 ft. Yellow 5/bag 31-476
Line Package, 3/4 in. x 450 ft. Yellow 5/bag 31-477
Line Package, 1 in. x 75 ft. White 50/pack 31-334
Line Package, 1 in. x 200 ft. White 5/bag 31-479
Line Package, 1 in. x 300 ft. White 5/bag 31-480
Line Package, 1 in. x 450 ft. White 5/bag 31-481

B-13 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

CONDUIT BENDERS
Bender Heads
• Available in ductile iron and aluminum heads
• Exceptional, durable, materials for extra strength
• Reinforced at stress points to provide longer life
• Markings are raised and cast into the bender body
on both sides for easy visibility
• Deeply serrated step helps prevent slippage
#1
when applying force BRAND*
IN HAND

TOOLS & SUPPLIES

• Grooved internal hook surface helps prevent
conduit from slipping BENDERS
• Flat hook surface provides stable starting point
• Desirable bending system

Handles
• Rugged, steel construction for long-term durability
• Baked-on blue enamel finish resists corrosion and
enhances visibility
• Convenient bending guide for offset bends

High-strength ductile iron or light aluminum

*According to Electrical Distribution Vista data (Q4, 2017).

Arrow

Rim Notch
Degree Scale Star-Point

IDEALIND.COM • 800-435-0705 | B-14

 Ductile Iron Benders Bender/BenderBoot™ Combos
• Grooved patented foot provides stability and
leverage while bending on smooth surfaces
• Textured tread and hand grip provide
support for saddle and offset bends
• Easy to push-on and remove

Description Part No.

• Withstands a lifetime of heavy use 1/2 in. EMT Ductile Iron Bender (74-026)
74-126
• Strong iron material w/BenderBoot™
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC Iron
Part No. Part No. Part No. 74-127
TOOLS & SUPPLIES

Bender (74-027) w/BenderBoot™

Conduit Type and (head (handle (head and
Size only) only) handle)
1/2 in. EMT 74-001 74-019 74-026
BenderBoot™
• Grooved patented foot provides
3/4 in. EMT, 1/2 in. stability and leverage
74-002 74-019 74-027
Rigid & 1/2 in. IMC
• Textured tread and hand grip
1 in. EMT, 3/4 in. Rigid provides support for saddle
74-003 74-020 74-028
& 3/4 in. IMC
and offset bends
1-1/4 in. EMT, 1 in. • Easy push-on assembly
74-006 74-021 74-034
Rigid & 1 in. IMC
to 1/2 in. and 3/4 in. bender
handles
Aluminum Benders
Description Part No.
BenderBoot™ 74-037

Pocket Bender Guide

• Convenient pocket-sized FREE
reference guide
• Lightweight aluminum for easy handling
• Includes simple, concise bending
• Strong enough for every day use techniques for precision stubs,
back-to-back, offset and saddle bends
Part No. Part No. Part No.
Conduit Type (head (handle (head and Description Part No.
and Size only) only) handle)
Pocket Bender Guide P-100
1/2 in. EMT 74-031 74-019 74-046
Guide can be downloaded from our website at idealind.com.
3/4 in. EMT, 1/2 in.
74-032 74-019 74-047
Rigid & 1/2 in. IMC
Bender Bottle Opener
• Made in U.S.A.
• Pry off or twist off caps

1-1/4” EMT 1” EMT

1” Rigid 3/4” Rigid 3/4” EMT
1” IMC 3/4” IMC 1/2” Rigid
1/2” IMC
1/2” EMT

Description Part No.

Bender Bottle Opener 74-100

B-15 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

WIRE STRIPPERS
Invented and manufactured at our Sycamore, Illinois *
facility, the T ®-Stripper Wire Stripper line is the
leading brand name in the world.

Kinetic® Reflex™ T®-Stripper Reflex™ Premium T®-Stripper

Wire Stripper Wire Stripper
•  Thumb Valley™ Protection •  Thumb Valley™ Protection
•  Pocket Locket Locking Hasp • Textured Thermoplastic Grips

TOOLS & SUPPLIES

•  Shear Cut Bolt Cutters • Ergonomic Textured Handles
• Textured Thermoplastic Grips
• Ergonomic Textured Handles

Kinetic® Super Wire Stripper T®-Stripper Wire Stripper

• Thumb Valley™ Protection • Compact, lightweight
• Pocket Locket Locking Hasp • Precision-ground, knife-type
• Shear Cut Bolt Cutters blades

• Textured Thermoplastic Grips • Built-in looping holes, wire

cutters and plier nose
• Ergonomic Curved Handles
• Straight Handles
Reflex™ Super T -Stripper
®

Wire Stripper
•L
 ocking Pawl
•B
 olt Cutting
•E
 xtended Textured Comfort
•E
 rgonomic Handles
*According to Electrical Distribution Vista data (Q4, 2017).

T®-Stripper Wire Stripper Selection Guide

6 8 10 12 14 16 18 20 22 24 26 28 30
Hole Size

45-100’s 45-400’s 45-600’s 45-700’s 45-900’s

8 10 12 14 16 18 20 22 24 26 28 30 32
Solid

22 24 26 28 30
45-125 45-417 — — —
Str.

24 26 28 30 32
Solid

14 16 18 20 22 24
45-121 45-416 — 45-716 —
Str.

16 18 20 22 24 26
Solid

10 12 14 16 18
45-120 45-415 — 45-715 45-915
Str.

12 14 16 18 20
Solid

8 10 12 14 16
— — 45-615 — —
Str.

10 12 14 16 18
Solid

6 8 10 12 14
45-124 45-418 45-618 45-718 45-918
Str.

8 10 12 14 16
T®-Cutter

45-123 — — — —

IDEALIND.COM • 800-435-0705 | B-16

 T®-Stripper Wire Strippers Reflex™ Super T®-Stripper Wire
• Form-ground, knife-type blades Strippers
for accurate, easy
stripping without • 6/32 and 8/32 self-
nicking conductor 45-120 chasing screw-cutting
holes
• Laser-etched wire 45-615
gauge for easy-to-read • Ergonomic design
visibility for maximum comfort
• Spring-loaded automatic opening • Curved handles help reduce wrist fatigue
• Corrosion-resistant, black oxide finish • Textured sleeves with extra cushioning for added
comfort
• Tough steel construction
TOOLS & SUPPLIES

Description Solid Stranded Part No.

Description Solid Stranded Part No.
T®-5 T®-Stripper 8-16 AWG 10-18 AWG 45-615
45-119* Reflex™ Super
Wire Stripper T®-Stripper Wire 45-618
10-18 AWG 12-20 AWG
T®-5 T®-Stripper Stripper 8-14 AWG 8-16 AWG
45-120 45-619*
Wire Stripper
T -6 T -Stripper
® ®
Reflex™ Super 12/2
14-24 AWG 16-26 AWG 45-121
Wire Stripper & 14/2 NM Cable 12-2 and
— 45-621
T®-7 T®-Stripper T®-Stripper Wire 14-2 AWG
22-30 AWG 24-32 AWG 45-125 Stripper
Wire Stripper
T®-8 T®-Stripper
Wire Stripper
6-14 AWG 8-16 AWG 45-124
Reflex™ Premium
T®-Stripper Wire
Stripper – Metric
0,75-6mm2 45-120-341 T®-Stripper Wire Strippers
T -Stripper Wire
® • Ergonomic design for maximum
0,5-4mm2 45-125-341 comfort
Stripper – Metric
• Curved handles help 45-415
Kinetic Super Wire Strippers
® reduce wrist fatigue

• Non-slip textured grips • Textured sleeves with extra

and thumb rest cushioning for added comfort
45-715
• Plier nose for holding
and twisting wires Description Solid Stranded Part No.

• Slide lock for safety and storage 10-18 AWG 12-20 AWG 45-415
Reflex™ Premium 14-24 AWG 16-26 AWG 45-416
• Thumb and finger valley makes stripping T®-Stripper Wire
easy and accurate Stripper 22-30 AWG 24-32 AWG 45-417

Description Solid Stranded Part No. 6-14 AWG 8-16 AWG 45-418
Reflex™ Premium
10-18 AWG 12-20 AWG 45-715 0,5mm2-4,0mm2 45-425-341
Kinetic® T®-Stripper – Metric
Super Wire 14-24 AWG 16-26 AWG 45-716
Stripper
6-14 AWG 8-16 AWG 45-718 1000V Insulated T®-5 Wire Stripper
• UL Classified
Kinetic® Reflex™ T®-Stripper • High visibility,
Wire Strippers double insulated
handles provide LISTED
• Non-slip textured safety, comfort
grips and thumb rest 45-915 and control
• Plier nose for holding
and twisting wires Description Part No.
• Slide lock for safety and storage
1000V Insulated Wire Stripper 45-9120
• Thumb and finger valley makes stripping easy
and accurate
Description Part
Solid Stranded
No.
Kinetic® Reflex™ 10-18 AWG 12-20 AWG 45-915
T®-Stripper
Wire Stripper 6-14 AWG 8-16 AWG 45-918

*Handle contains red, white and blue grips.

B-17 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG
NM Cable Dual-Hole Combo Tool
T®-Stripper Wire Strippers
• Stripping holes for
stripping two 12 AWG
or two 14 AWG wires 45-247
simultaneously

• Convenient, multi-function tool features precision-

ground stripping holes and knife-to-anvil cutting
Description Solid Part No. blades
Premium T -14 T -Stripper
® ®
• Crimps bare and insulated terminals
45-247
Wire Stripper

TOOLS & SUPPLIES

• Cuts unhardened bolts (4-40, 6-32, 8-32, 10-24 and
14/2 NM Cable T®-Stripper 12 or 14 10-32) and reforms threads
45-248
Wire Stripper AWG
Description Solid Stranded Part No.
12/2 NM Cable T®-Stripper
45-249 Combo Tool 8-20 AWG 10-22 AWG 30-428
Wire Stripper

Lil’ Ripper Stripper ™

• Rips outer jacket of NM cable
Multi-Crimp Strip Tool
cleanly and quickly • Cuts wire
• Clips outer sheathing to remove excess wire • Crimps insulated and
jacket non-insulated wires
• V-Notch strips inner wires • Cuts bolts
• Looping holes loop wire for screw-on connections • Strips 10-22 AWG wire
Description Part No.
Description Part No.
Lil’ Ripper Stripper™ 45-025
Multi-Crimp Strip Tool 45-778

Cable Ripper T®-Cutter Wire Cutter

• Slits NM cable wire sheathing
• Hardened steel,
before stripping wires
sheer-type blades
• Quick, clean and easy end
• Spring-loaded
or mid-run removal of jacket
automatic opening
• Convenient built-in wire gauge
• Convenient plier nose for extra
gripping strength
Description Part No.
• Corrosion-resistant, black oxide finish
Side Entry Cable Ripper 45-118SRS
• Tough steel construction

V-Notch Stripper Description Part No.

• Cuts copper or aluminum T -Cutter Wire Cutter

®
45-123
wire, solid or stranded
• Rotating cam wheel adjusts
to strip 10-24 AWG wire
• Looping holes for solid wire

Description Part No.

V-Notch Stripper 45-101

IDEALIND.COM • 800-435-0705 | B-18

 Data T®-Cutter Wire Cutter 7-in-1 Stripper
• Cuts round communication
cable and maintains cable
geometry for better
cable performance
• Cuts multi-pair cable up to
.500 in. (12.7mm) and coaxial
cable up to RG-9/U
• Suitable for soft cables (not ACSR) • Versatile, seven-function tool features precision-
• Steel reinforced center conductors can be trimmed ground stripping blades, cushioned grips and plier
with bolt cutting holes nose
• Cushioned comfort grip handles • Crimps bare and insulated terminals for 10–22 AWG
TOOLS & SUPPLIES

wire, RG-59 coax connectors and 7 to 8mm auto

• Locking latch keeps tool closed in pouch ignition connectors
Description Part No. • Cuts unhardened wire, bolts and screws (4-40, 6-32,
8-32, 10-24 and 10-32) and reforms threads
Data T®-Cutter 45-074
• Cuts stranded, solid, NM wire and U.F. wire to 8 AWG

Underground Feeder (UF) Description Solid Stranded Part No.

Cable Stripper 7-in-1 Stripper 8 - 16 AWG 10 - 18 AWG 45-777
• Self-adjusting stripping
blades automatically select Round Cable Slitting and
proper position
Ringing Tools 45-128
• Strips 12/2 AWG solid to 14/2
AWG Underground Feeder (UF) Cable • Cuts around cable jacket
as well as slits the length of
• Strips Twin and Earth cable jacket for easy removal
• Open-throat construction allows unlimited strip • Use with single or multiple
length conductor cable up to 1.50
• Neatly removes outer cable sheath and inner wire in. O.D.
sheathing to desired lengths • Blade adjusts for jacket
• Lightweight, ergonomic design helps reduce user thicknesses up to .125 in. 45-129
fatigue • Spare blade in handle base
Description Part No. Replacement
Description Part No.
Underground Feeder Cable Stripper 45-235 Blades
Cable Stripper for 1/4 in. to
45-128
3/4 in. O.D.
Coax Strip and Crimp Tool L-7486*
Cable Stripper for 3/4 in. to
• Precision, form- 45-129
1-1/2 in. O.D.
ground stripping
holes remove *Two Blades/package
outer jacket and
insulation from
RG-59 and RG-6 coaxial cable
• Durable blades cut copper-coated steel
conductors
• Three crimping nests for crimping F-connectors
and ring terminals

Description Part No.

Coax Strip & Crimp Tool 30-433

B-19 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

TOOLS & SUPPLIES
PLIERS - MADE IN THE USA

FORGING TOOLS FOR THE NEXT

OUR COMMITMENT WITH OUR

MADE IN THE USA COLLECTION

For more than 100 years, IDEAL® Electrical has U N M AT C H E D Q UA L I T Y

These products, proudly produced in the USA, have been
had a proud history of producing the highest
supplied to the government and armed forces for decades
quality tools by marrying innovation with tradition. where they are routinely used in some of the harshest
environmental conditions. We believe that when Americans
It’s that American ingenuity that runs through
need tools they can rely on, those tools should be
everything we do, especially our commitment to American-made.

producing tools here, a hallmark of our “Made in the

BUILDING OUR COMMUNITIES
USA” collection.
Not only do we build the tools that build our world, but we
It’s not just about making high quality tools, it’s are unceasing in our support for community on a local level;
union and non-union from trade schools to professional
about making them the right way; with American organizations. We support this industry and are committed

steel and American labor, right here in the USA. to keeping and creating more American jobs because of it.

Look for our Made in the USA badge for tools that

are American through and through.

IDEALIND.COM • 800-435-0705 | B-20

 PLIERS
• Custom alloyed, premium quality tool
steel provides excellent cutting
performance and commercial use
durability
• Precision ground knife-to-knife cutting
blades for accurate, quick wire cutting
• Hardened and tempered body and cutting
edges for optimum performance
• High leverage pivot design provides great
TOOLS & SUPPLIES

cutting and gripping power

Grips

Heavy-Duty Smart-Grip™ 1000V Grip

Dipped Grip Dual Durometer
Molded Grip

Color-coding and FastFinder™

letter markers on SmartGrip™
handles provide quick tool
identification, even by touch!

Tongue & Cable

Linesman Long Nose Groove Cutter Diagonal Crimper Slip-Joint

B-21 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Linesman Pliers Diagonal-Cutting Pliers
• Knife-to-knife blades provide excellent cutting • Knife-to-knife blades provide excellent cutting
performance performance
• Cuts hardened wire, bolts and stainless steel wire • High-leverage design provides more cutting
power
• Models 35-029 and 35-3029 feature a convenient
angled head for hard-to-reach areas and rocking
out nails

TOOLS & SUPPLIES

Description (Smart-Grip™ Handles) Part No.
9-1/2 in. Linesman Pliers w/New England nose
30-3430
and crimping die
Description (Dipped-Grip Handles) Part No.
Description (Smart-Grip™ Handles) Part No.
9-1/2 in. Linesman Pliers w/New England nose,
30-430 8 in. Diagonal-Cutting Pliers 35-3028
crimping die and fish tape puller
8 in. Diagonal-Cutting Pliers w/angled head 35-3029
Long-Nose Pliers Description (Dipped-Grip Handles) Part No.
• Narrow profile head designed for working in 8 in. Diagonal-Cutting Pliers 35-028
tight areas
8 in. Diagonal-Cutting Pliers w/angled head 35-029
• Serrated jaws provide secure gripping surface
• Drop-forged, high-carbon steel construction
Tongue & Groove Pliers
• Blades provide excellent cutting performance
• Reinforced flange protects
• Laser-hardened blades cut hardened wire, bolts against breakage
and stainless steel wire
• Drop-forged, high-carbon steel
construction

Description (Smart-Grip™ Handles) Jaw Opening Part No.

Description (Smart-Grip™ Handles) Part No. 9-1/2 in. Tongue & Groove Pliers 2 in. 35-3420
8-1/2 in. Long-Nose Pliers w/Cutter 35-3038 Description (Dipped-Grip Handles) Jaw Opening Part No.

Description (Dipped-Grip Handles) Part No. 9-1/2 in. Tongue & Groove Pliers 2 in. 35-420
7 in. Tongue & Groove Pliers 1 in. 35-426
6 in. Long-Nose Pliers w/Cutter 35-036
10-1/2 in. Tongue & Groove Pliers
2 in. 35-430
8-1/2 in. Long-Nose Pliers w/Cutter 35-038 w/V-Jaw
12 in. Tongue & Groove Pliers 2-1/4 in. 35-440

IDEALIND.COM • 800-435-0705 | B-22

 Cable Cutters Slip-Joint Pliers
• Drop-forged, high-carbon steel construction • Two position slip joints fit
• Precision-ground, hardened cutting edges large and small jobs
provide accurate cuts without cable distortion • Dipped comfort-grip
• Cuts 2/0 copper and 4/0 aluminum (not for use handles for a secure grip
on ACSR) • Flush rivet

35-100

Description Part No.

6 in. Slip Joint Pliers 35-100
TOOLS & SUPPLIES

8 in. Slip Joint Pliers 35-102

Description (Smart-Grip™ Handles) Part No.

9-1/2 in. Cable Cutter 35-3052
Description (Dipped-Grip Handles) Part No.
9-1/2 in. Cable Cutter 35-052

Multi-Crimp Tools
• Crimps bare or insulated terminals and splices
on 10–22 AWG wire
• Knife-to-anvil blades provide long-lasting cutting
performance
• High leverage for easy crimping and cutting
• Drop-forged, high-carbon steel construction

Description (Smart-Grip™ Handles) Part No.

9-3/4 in. Multi-Crimp Tool 30-3429
Description (Dipped-Grip Handles) Part No.
9-3/4 in. Multi-Crimp Tool 30-429

B-23 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

ELECTRICAL HAND TOOLS
IDEAL® Electrical offers a complete range of specialized
hand tools to support the dynamic needs of the professional
electrician. With innovative, quality tools for professional
performance, backed by one superior brand, IDEAL continues
to deliver premium tools in all categories. From screwdrivers,
pliers, wrenches, levels to our iconic wire strippers, cutters,
saws, and more you can count on IDEAL for all of your
professional hand tool needs.

Hex-Key Sets Heavy-Duty Hacksaw

TOOLS & SUPPLIES

• High-quality steel • Cushioned ergonomic grip for
construction performance and comfort
35-147
• Dual-durometer, • Rugged frame provides
slip-resistant grip 35-146 lightweight rigidity and
exceptional control
Description Part No. • Includes 12 in. x 24T bi-metal blade, stores up to
nine extra blades
4 in. handle w/nine 3-in. keys (5/64 in., 3/32 in., 7/64
35-146 • Blades can be adjusted to 55° angle for flush
in., 1/8 in., 9/64 in., 5/32 in., 3/6 in., 7/32 in. & 1/4 in.)
cutting and tensioned to 30,000 psi
5-1/4 in. handle w/five 5-in. keys (3/16 in., 7/32 in.,
35-147
1/4 in., 5/16 in. & 3/8 in.) Description Part No.
Heavy-Duty Hacksaw 35-260
Utility Knife
• Quick-change retractable blade
Ergonomic Hacksaw
system — no disassembly required • Angled handle for easier
• Built in pull-line cutter cutting
• Includes three blades in • Blade can easily be adjusted
storage compartment for flush cutting
• Easy tensioning wing-nut keeps blades tight for
Description Replacement Part No. straighter cuts
Blades
• Cushioned ergonomic grip for performance and
Utility Knife 35-301* 35-300 comfort
*Five universal blades per package.
Description Part No.
Ergonomic Hacksaw with 12 in. x 24T
Folding Saw bi-metal blade
35-261

• Light-weight, heavy-duty
die cast construction Hacksaw Blades
• Ergonomic rubber • Bi-metal blades provide
comfort grip strength, flexibility and
long life
• Blade safely and conveniently folds down in handle
• Accepts most standard 6 in. recip blades Description Quantity Part No.
12 in. x 18T Blades 10 35-271
Description Part No.
12 in. x 24T Blades 10 35-272
Folding Saw 35-274
12 in. x 32T Blades 10 35-273

Jab Saw 12 in. x 18T Blades 100 35-262

12 in. x 32T Blades 100 35-264
• Ergonomic, textured non-slip
grip w/plunge-tip design
• Wallboard blade
• Weighted head provides
superior balance
Description Part No.
Jab Saw 35-275

IDEALIND.COM • 800-435-0705 | B-24

 Pocket Knives Precision Levels
• 2-1/4 in. blade locks in • Integrated Thumb
position 35-285 Winder™ conduit wheel
• High-carbon stainless steel and contoured screw
blade construction for extra prevents doglegs
strength and durability • Rare earth magnets
• Durable non-slip handle provide maximum
35-286
holding strength
• Brass liners
• V-groove bottom
35-287 surface for stable
3.5 in. Precision
mounting to conduit
Description Blade Type Part No. Level is handy
for tight
Adjustable Wrenches
TOOLS & SUPPLIES

Electrician’s Knife Spear point and Screwdriver 35-285

spaces
Hawkbill Knife Curved 35-286
Linesman Jack Knife Sheepfoot 35-287

Adjustable Wrenches
• Forged steel construction with
narrow profile head reaches into
tight spaces
• Tight tolerance on
thumbscrew will 35-021
not loosen or Description Part No.
wobble with use
3.5 in. Precision Level 35-206
• Extra wide jaw capacity with standard and metric
markings 6 in. Precision Level 35-207
8 in. Precision Level 35-208
Description Jaw Capacity Part No.
6 in. Adjustable Wrench 7/8 in. 35-019
Torpedo Level
8 in. Adjustable Wrench 1-1/8 in. 35-020
• 9 in. aluminum frame with
10 in. Adjustable Wrench 1-5/16 in. 35-021 magnetic and V-grooved
edges
12 in. Adjustable Wrench 1-1/2 in. 35-022
• Windows provide easy reading of plumb level
and 45° angle
Chisel
• Three rare earth magnets for strong cling to conduit
• Hardened and tempered
for long life Description Part No.
• Use Wood Chisel by 9 in. Torpedo Level 35-205
hand or mallet

Description Part No. Measuring Tapes

Wood Chisel 35-189

Drop-Forged Hammer TIP

• One-piece drop-forged, Magnetic-
tempered-steel polished tipped end
head and handle 35-238 hook
• Long, straight claws 35-242
simplify removal of electrical fixtures
• Measurement marks on both sides of tape
• Comfortable, perforated anti-vibe grips
• Blade automatically stays out when extended
Description Part No. • Push button for smooth blade retraction
18 oz. x 12-1/2 in. Drop-Forged Handled Hammer 35-210 • Comfortable, shock-resistant rubber grip

Description Tape Width Part No.

Auto-Lock Tape Measure - 25 ft. 35-242
Auto-Lock Tape Measure 1 in.
35-238
w/Magnetic Tip - 30 ft.

B-25 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Electric Engraving Tool Ratchet Crimp Tool
• Engraves metal, glass, stone, • Crimps insulated or bare terminals
ceramics, plastics, hard and splices on 10–22 AWG wire
rubber, wood and
• Ratchet action prevents
many other hard
release prior to crimp
materials
connection – helps
• Unique design reduces bouncing and provides ensure uniform crimps
smooth, easy writing; operating at 7,200 strokes
• Vinyl-coated handles provide a solid, comfortable
per minute
grip
• Stroke adjusts to vary depth of mark
Description Part No.
• Includes carbide-tipped point for normal markings
Ratchet Crimp Tool 83-001

TOOLS & SUPPLIES

• Diamond point available for engraving extra-hard
materials (50 to 64 Rockwell, scale C)
Four-Way Crimp Tool
Description Part No.
• Design ensures even compression
Engraver w/carbide-tipped point & 3-conductor
grounded cord (7 ft.) & plug — 120V, 60 Hz
11-113 and reliable connections
• Spring-loaded, cam-actuated
Carbide-Tipped replacement
point
11-200 plungers
• Fingertip adjustment for
Diamond replacement point 11-201
two connector sizes

IDEAL Wipes Description Part No.

Multi-Purpose Towels Four-Way Crimp Tool for use with Buchanan

C24
2006S and 2011S Crimp Connectors
• Durable pre-moistened fabric scrubs
without tearing
• Cleans dirt, grease, lube and grime
SirNickless™ Cutter
from most surfaces • Handles all common BX, MCAP®, 35-782
• Infused with natural MC and Flex cables
hand moisturizers • Blade cuts armor without
and Vitamin E, orange damage to internal conductors
citrus scent
• Splices cleanly through casings
• Meets California with only a few turns
C.A.R.B. standards
• Handle knob stores up to six
Description Part No. replacement blades (Cutter
comes with one blade installed.)
IDEAL Wipes, 12 in. x 9 in. (82/can) 38-500
35-781
IDEAL Wipes Canister Bracket 38-500BR
Description Quantity Part No.

Mechanical Indentor and Rotary Armored

Cable Cutter
— 35-782
Crimp Tool 5/pack 35-781
• Use with aluminum (6 AWG Replacement Blades
1/pack 35-781-1
to 4/0) and copper (8 AWG
to 250 KCMIL) wires MCAP is a registered trademark of Southwire Company.
®

• Adjustable crimping
nests with clearly Aviation Tin Snips
marked gauges • Labor-saving design cuts straight,
• Lightweight and easy to operate left and right, with one tool
• Rugged cast steel construction for long-term • Chrome-molybdenum steel
durability forged blades for strength
and durability
Description Part No. • Serrated edges provide
Mechanical Indentor & Crimp Tool 88-843 a stable hold when cutting

Description Part No.

Aviation Tin Snips 35-001

IDEALIND.COM • 800-435-0705 | B-26

 CABLE CUTTERS
The IDEAL focus on innovation is demonstrated by the PowerBlade™ line of cable cutters. Chucked into
virtually any drill these robust cutters save time and money for utilities and commercial electricians.

Big Kahuna™ PowerBlade™

Cable Cutter 750 Cable Cutter
TOOLS & SUPPLIES

(Drill not included)

• Fits most standard power drills • Fits most standard power drills (Drill not included)

• Jaw opening of 3-1/2 in. • Jaw opening of 1-1/2 in.

• Cuts copper cable up to 1250 MCM and aluminum • Cuts copper cable up to 750 MCM and aluminum
cable up to 1250 MCM cable up to 1000 MCM
• Specially hardened, rounded blades minimize cable • Specially hardened, rounded blades minimize cable
distortion for professional quality distortion for professional quality

Description Replacement Description Replacement

Part No. Part No.
Blade* Blade*

Big Kahuna™ Cable Cutter KB-0276R 35-076 PowerBlade™ 750 Cable Cutter K-8906R 35-078
*Two blades per package, 1 upper blade and 1 lower blade. *Two blades per package, 1 upper blade and 1 lower blade.

Merlin™ ACSR PowerBlade™ Cable Cutter

Cable Cutter Replacement Parts
Replacement Parts Part No.
Gearbox Assembly H-3400
PowerBlade™ Replacement Folding Assembly H-3507
PowerBlade™ Replacement Torque Arm
K-8909
Assembly
(Drill not included)

• Fits most standard power drills

• Jaw opening of 3/4 in. for precision and accuracy
• Especially designed for reinforced aluminum cable
• Cuts up to Merlin ACSR cable size or 250 MCM
Copper or Aluminum

Description Replacement
Part No.
Blade*
Merlin ACSR Cable Cutter KB-0278R 35-077
*Two blades per package, 1 upper blade and 1 lower blade.

Check out our PowerBlade videos at idealind.com

B-27 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Ratcheting Cable Cutter Long-Arm Cable Cutters
• Cuts hard drawn copper up to • High strength forged blades for
400 MCM and soft copper, ultimate durability
aluminum and multiple conductor • Precision-ground jaws make clean
cable up to 600 MCM cuts with minimal cable distortion
• Hardened steel blades ensure • Replaceable blades
consistent cuts and long-term
durability • For copper and aluminum only.
• Rounded blade design • Not designed for steel or ACSR.
minimizes cable distortion
during cutting
• Quick release mechanism

TOOLS & SUPPLIES

simplifies blade back-out
• Locking mechanism keeps handles closed for easy Replacement
storage Description Length Part No.
Head

Description Part No. 250 MCM Long-Arm

14 in. 35-031B 35-031
Cable Cutter
400 MCM Ratcheting Cable Cutter* 35-056
500 MCM Long-Arm
*Max. Jaw Opening - 2 in. Not for cutting steel or ACSR. 22 in. 35-032B 35-032
Cable Cutter
1000 MCM Long-Arm
32 in. 35-033B 35-033
Cable Cutter
CAUTION: Comfort-grip handles are not designed for protection
against electrical shock. Do not use on live circuits.

BigFoot™ Ratcheting Cable Cutter

• Designed to cut 750 MCM and smaller
hard-drawn copper and aluminum cables Hardened, long-
life steel blades
• Hardened steel blades ensure consistent cuts
and long-term durability Cuts up to 750 MCM
• Rounded blade design minimizes cable (380mm2) hard-
distortion during cutting drawn copper
• Quick release mechanism simplifies
blade back-out Quick handle release
• Locking mechanism keeps handles Handle locking mechanism
closed for easy storage
• Molded-in foot provides stability
and leverage when making
multiple cuts High strength ratcheting teeth

Comfort grip handles

Description Part No.

750 MCM Ratcheting Cable Cutter* 35-053

Molded foot for stability and leverage. Replacement blade (movable side only) 35-057
*Max. Jaw Opening - 2 in. Not for cutting steel or ACSR.

IDEALIND.COM • 800-435-0705 | B-28

 SCREWDRIVER TYPES
Specialty
• Multi-Bit
• Top quality screwdrivers designed especially for the professional
electrician
• Multi-functional for all your fastening needs

Cushioned-Grip
• Cushioned-grip provides comfort and maximum torque
• Blasted tip helps prevent plate chipping
• Nickel chrome steel shank for maximum strength and
durability
TOOLS & SUPPLIES

• Mini cushioned-grip tightens small fasteners easily

and accurately

Nut Drivers
• Hollow shanks handle longer bolts
• Available in long lengths to accommodate extra
long bolts
• Cushioned-gripped for comfort and maximum torque

Screwdriver Advanced Features

Specialty

Patented Wire Accu-Loop™ Wire

Connector Wrench Looping Holes make
in handle perfect loops!

Cushioned-Grip

Combo Head™ tip

FastFinder™ icon
ensures full fastener
shows tip type
engagement
on handle end

B-29 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

 NEW
Extendable Length Screwdriver 6-in-1 Stubby & 6-in-1 Multi-Bit
• 1/4 in. slotted Screwdriver & Nut Driver Combo
• #2 Phillips
• #1, #2 Square 6-in-1 Stubby
• Pull up to retract, push • 3/16 in., 1/4 in. slotted
down to extend • #1, #2 Phillips
• Collar spins for • 1/4 in., 5/16 in. hex
ease of use 6-in-1 Multi-Bit
• Comes with two • 3/16 in., 1/4 in. slotted
double-sided • #1, #2 Phillips
blades • 1/4 in., 5/16 in. hex

Description Part No. Description Part No.

TOOLS & SUPPLIES

Extendable Length Screwdriver 35-947 6-in-1 Stubby & 6-in-1 Multi-Bit Screwdriver &
35-954
Nut Driver Combo`

6-in-1 Stubby Multi-Bit Screwdriver 6-in-1 Stubby & 12-in-1 Multi-Bit

& Nut Driver Screwdriver & Nut Driver Combo
• 3/16 in., 1/4 in. slotted
• #1, #2 Phillips 6-in-1 Stubby
• 1/4 in., 5/16 in. hex • 3/16 in., 1/4 in. slotted
• #1, #2 Phillips
• 1/4 in., 5/16 in. hex
12-in-1 Multi-Bit
Description Part No. • 3/16 in., 1/4 in. slotted
6-in-1 Stubby Multi-Bit Screwdriver & Nut Driver 35-945 • #1, #2 Phillips
• 3/16 in., 1/4 in., 5/16 in.,
3/8 in. hex
6-in-1 Multi-Bit Screwdriver & • T10, T15 Torx®
Nut Driver • #1, #2 square

• 3/16 in., 1/4 in. slotted Description Part No.

• #1, #2 Phillips
• 1/4 in., 5/16 in. hex 6-in-1 Stubby & 12-in-1 Multi-Bit Screwdriver &
35-953
Nut Driver Combo
Torx® is a registered trademark of Acument Intellectual
Properties, LLC.
Description Part No.
6-in-1 Multi-Bit Screwdriver & Nut Driver 35-949 12-in-1 Multi-Bit Screwdriver
& Nut Driver w/Combo Head™
12-in-1 Multi-Bit Screwdriver • 3/16 in., 1/4 in. slotted
& Nut Driver • #1, #2 Phillips
• 3/16 in., 1/4 in., 5/16 in.,
• 3/16 in., 1/4 in. slotted
3/8 in. hex
• #1, #2 Phillips
• T10, T15 Torx®
• 3/16 in., 1/4 in., 5/16 in.,
• #1, #2 square
3/8 in. hex
• T10, T15 Torx®
Description Part No.
• #1, #2 square
12-in-1 Multi-Bit Screwdriver & Nut Driver w/ 35-939
Description Part No. Combo Head™
12-in-1 Multi-Bit Screwdriver & Nut Driver 35-946
Torx is a registered trademark of Acument Intellectual
®

Properties, LLC.

Replacement Tips
Description Part No.
1/4 in. Slotted – #2 Phillips 35-940
3/16 in. Slotted – #1 Phillips 35-941
#1 Square – #2 Square 35-942
#10 & #15 Star 35-943

IDEALIND.COM • 800-435-0705 | B-30

 21-in-1 Twist-a-Nut™ Ratcheting 7-in-1 Twist-a-Nut™
Screwdriver Screwdriver
• Patented Wire Connector Wrench • Patented Wire
accepts a wide variety of Connector
connectors and reduces Wrench
finger fatigue accepts a wide variety of connectors and reduces
• Pro-quality, 28 finger fatigue
tooth, all metal • Ergonomic, slip-free textured grip provides
ratchet can handle 225 lbs. of torque without failure excellent torque and is impervious to perspiration,
• Ergonomic, slip-free textured grip provides gas, oil and chemicals
excellent torque and is impervious to perspiration, • Handle is interchangeable with conduit deburrer
gas, oil and chemicals head (#35-096) and 6-in-1 Tap Tool (#35-922)
TOOLS & SUPPLIES

• Multiple bit storage unit in handle • Bits included: 1/4 in. Slotted, 3/16 in. Slotted, #1
Phillips, #2 Phillips, 1/4 in. Nut Driver and 5/16 in.
• Bits included: #1 Phillips, #2 Phillips, #3 Phillips,
Nut Driver
3/16” Slotted, 1/4” Slotted, 5/16” Slotted, #1 Square, #2
Square, #15 Star, #20 Star, #25 Star, #30 Star, 3/32” Description Part No.
Hex, 1/8” Hex, 3/16” Hex, 5/32” Hex, 1/4” Nut, 5/16” Nut
and 7/16” Nut 7-in-1 Twist-a-Nut™ Screwdriver/Nut Driver 35-908

Description Part No. Replacement Handle K-8964

21-in-1 Twist-a-Nut™ Screwdriver 35-688

6-in-1 Twist-a-Nut™ Tap Tool
9-in-1 Ratch-a-Nut™ Screwdriver • Forms new threads, re-forms
burred threads and cleans
• Patented Wire Connector out obstructions
Wrench accepts a wide
variety of connectors and • Reversible, high-carbon
reduces finger fatigue tap with three
clearly marked
• Pro-quality, 28 tooth, thread sizes on
all metal ratchet can each end
handle 225 lbs. of torque without failure
• Handle is interchangeable with 7-in-1 Screwdriver
• Ergonomic, slip-free textured grip provides excellent (#35-908) and Conduit Deburrer (#35-083)
torque and is impervious to perspiration, gas, oil and
chemicals • Includes: 6-32, 8-32 & 10-32 on one tapping side
and 10-24, 12-24 & 1/4-20 on other side
• Accepts Twist-a-Nut™ replacement bits
• Bits included: 1/4 in. Slotted, 3/16 in. Slotted, #1 Description Part No.
Phillips, #2 Phillips, 1/4 in. Nut Driver, 5/16 in. Nut 6-in-1 Twist-a-Nut™
Driver, and 7/16 in. Nut Driver 35-922
Tapping Tool

Description Part No. Replacement collar and six taps 35-923

9-in-1 Ratch-a-Nut™ Screwdriver 35-988

Replacement Tips (for 7-in-1 Twist-a-Nut™ and 9-in-1 Ratch-a-Nut™ Screwdrivers)

Description Part No.
1/4 in. Slotted – #2 Phillips 35-911
3/16 in. Slotted – #1 Phillips 35-912
1/4 in. Slotted – #2 Square 35-913
3/16 in. Slotted – #1 Square 35-914
#15 & #10 Star 35-915

B-31 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Twist-a-Nut™ Conduit Deburring Tools Twist-a-Nut™ Pro Electrician’s
Screwdrivers

• Deburrs inside and outside edges of 1/2 in., 3/4 in. • Vapor-blasted tip improves screw grip
and 1 in. thin wall conduit
• Tough, chrome vanadium steel shank
• Hooded tip tightens EMT fitting set screws without
slipping Description Part No.

TOOLS & SUPPLIES

• Square tip “seats” much more quickly on fitting #2 x 6 in. Square Twist-a-Nut™ Pro
30-330
screws than slotted version Electrician’s Screwdriver

• Head removes and is interchangeable with IDEAL 1/4 in. x 4 in. Slotted Twist-a-Nut™ Pro
30-331
7-in-1 Twist-a-Nut™ Screwdriver shaft (#35-908) Electrician’s Screwdriver
• Head can be used at low speed setting in drill or 1/4 in. x 6 in. Slotted Cabinet Tip
30-333
cordless screwdriver Twist-a-Nut™ Pro Electrician’s Screwdriver

Part
Description Tip Type
No. 11-in-1 Screwdriver/Nut Driver
Conduit Deburring Tool Slotted 35-083
Conduit Deburring Tool #2 Square 35-075
Conduit Deburring Tool (head only) Slotted 35-096
Conduit Deburring Replacement Blade 35-097
Conduit Deburring Tool (head only) #2 Square 35-098
• Includes: 1/4 in. Slotted, 3/16 in. Slotted, #2 Phillips,
#1 Phillips, #1 Square, #2 Square, #15 Star, #10
Twist-a-Nut™ Conduit Wiring Kit Star, 5/16 in. Nut Driver & 1/4 in. Nut Driver
• Cushioned grip for comfort and performance
• Accu-Loop™ Wire looping holes

Description Part No.

11-in-1 Screwdriver/Nut Driver 35-910
Replacement Bits Part No.
1/4 in. Slotted - #2 Phillips (2/pack) 35-940
3/16 in. Slotted - #1 Phillips (2/pack) 35-941

• Includes: #1 & #2 Square (2/pack) 35-942

- Twist-a-Nut™ Screwdriver (35-908)
#15 & #10 Star (2/pack) 35-943
- Twist-a-Nut™ Deburring Head - Square Tip (35-098)
- Twist-a-Nut™ Tap Tool Shaft (35-923)
- Three Spare Bits – 1/4 in. Slotted & #2 Square, 3/16 in.
Slotted & #1 Square, #10 & #15 Star
- 8-Pocket Carrying Pouch (35-927)
• Nylon carrying pouch with metal belt clip holds
all three Twist-a-Nut™ tools plus room for four
replacement bits or taps

Description Part No.

Twist-a-Nut™ Conduit Wiring Kit 35-926
Twist-a-Nut™ Carrying Pouch only 35-927

IDEALIND.COM • 800-435-0705 | B-32

 8-Piece Cushioned-Grip 7-Piece Cushioned-Grip
Screwdriver Set Screwdriver Set
TOOLS & SUPPLIES

Description Part No. Description Part No.

8-Piece Screwdriver Set 35-298 7-Piece Screwdriver Set 35-1298
Set Includes: Set Includes:
#1 Phillips 35-193 #1 Phillips 35-193
3/16 in. Slotted 35-183 1/4 in. Heavy-Duty Cabinet 35-150
#2 Phillips 35-194 #2 Phillips 35-194
1/4 in. Heavy-Duty Round Keystone 35-164 1/4 in. Heavy-Duty Square Keystone 35-154
1/4 in. Heavy-Duty Square Keystone 35-154 3/16 in. Cabinet 35-183
3/16 in. Cabinet 35-186 1/4 in. Heavy-Duty Cabinet 35-156
1/4 in. Heavy-Duty Cabinet 35-151 3/16 in. Heavy-Duty Keystone 35-186
5/16 in. Heavy-Duty Keystone 35-166

5-Piece Cushioned-Grip 4-Piece Mini Cushioned-Grip

Screwdriver Set Screwdriver Set
• Set Includes: #0 Phillips, 1/16 in. Keystone, 3/32 in.
Cabinet and 1/8 in. Cabinet

Description Part No.

Description Part No.
5-Piece Screwdriver Set 35-297
4-Piece SOLD ONLY AS A SET
Set Includes: 35-1301
Screwdriver Set
#2 Phillips 35-194
1/4 in. Heavy-Duty Square Keystone 35-154 2-Piece Stubby Cushioned-
3/16 in. Cabinet 35-186 Grip Screwdriver Set
1/4 in. Heavy-Duty Cabinet 35-151
• Set Includes: #2
5/16 in. Heavy-Duty Keystone 35-166 Phillips and 1/4 in.
Keystone

Description Part No.

2-Piece Stubby SOLD ONLY AS A SET 35-1300
Screwdriver Set

B-33 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Phillips Cushioned-Grip Screwdrivers Heavy-Duty Cabinet Cushioned-Grip
Screwdrivers

Blade Handle Overall Blade Handle Overall Part

Description Part No. Description
Length Length Length Length Length Length No.

#1 Phillips 3 in. 3-3/4 in. 6-3/4 in. 35-193 1/4 in. shank and tip 4 in. 8-3/8 in. 35-150
1/4 in. shank and tip 6 in. 4-5/16 in. 10-3/8 in. 35-151
#2 Phillips 1-1/2 in. 1-15/16 in. 3-7/16 in. 35-191
1/4 in. shank and tip 8 in. 12-3/8 in. 35-152
#2 Phillips 4 in. 4-5/16 in. 8-5/16 in. 35-194
#2 Phillips 6 in. 4-5/16 in. 10-5/16 in. 35-195

TOOLS & SUPPLIES

#3 Phillips 6 in. 5-23/64 in. 11-23/64 in. 35-196
Heavy-Duty Round Shaft Keystone
Square Cushioned-Grip Screwdrivers Cushioned-Grip Screwdrivers

Blade Handle Overall Blade Handle Overall Part

Description Part No. Round Shank
Length Length Length Length Length Length No.

#0 Square 4 in. 8-5/16 in. 35-690 1/4 in. shank and tip 1-1/2 in. 1-15/16 in. 3-7/16 in. 35-161
1/4 in. shank and tip 4 in. 4-5/16 in. 8-5/16 in. 35-164
#1 Square 4 in. 8-5/16 in. 35-691
5/16 in. shank and tip 6 in. 5-11/32 in. 11-11/32 in. 35-166
#1 Square 8 in. 12-5/16 in. 35-692
4-5/16 in. 3/8 in. shank and tip 8 in. 5-11/32 in. 13-11/32 in. 35-168
#2 Square 4 in. 8-5/16 in. 35-693
#2 Square 8 in. 12-5/16 in. 35-694
#3 Square 4 in. 8-5/16 in. 35-695
Heavy-Duty Square Shaft Keystone
Cabinet Cushioned-Grip Screwdrivers Cushioned-Grip Screwdrivers

Blade Handle Overall Part Blade Handle Overall

Description Square Shank Part No.
Length Length Length No. Length Length Length
3/16 in. shank and tip 3 in. 6-3/4 in. 35-183 1/4 in. shank
4 in. 4-5/16 in. 8-5/16 in. 35-154
and tip
3/16 in. shank and tip 4 in. 7-3/4 in. 35-184
5/16 in. shank
3/16 in. shank and tip 6 in. 3-3/4 in. 9-3/4 in. 35-186 6 in. 5-11/32 in. 11-11/32 in. 35-156
and tip
3/16 in. shank and tip 8 in. 11-3/4 in. 35-188 3/8 in. shank
8 in. 5-11/32 in. 13-11/32 in. 35-158
3/16 in. shank and tip 10 in. 13-3/4 in. 35-190 and tip

IDEALIND.COM • 800-435-0705 | B-34

 Combo Head™ Cushioned-Grip Awl
Screwdriver

Patented Combo • Heavy-duty construction for piercing,

Head™ tip ensures full punching and scribing
fastener engagement
Blade Handle Overall
Description Part No.
Length Length Length
Awl 3 in. 3-3/4 in. 6-3/4 in. 35-202

Grip-n-Screw™ Screwdriver
TOOLS & SUPPLIES

• Holds screw when collar is extended

• Designed to accurately and securely fit most
fasteners • Non-magnetic screw-holding screwdriver
• Patented design
Blade Handle Overall Part
Description
Length Length Length No.
Blade Handle Overall Part
Description
Length Length Length No. 3/16 in. Slotted
Grip-n-Screw™ 5-7/8 in. 3-3/4 in. 9-5/8 in. 35-406
Combo Head™ Screwdriver
Cushioned-Grip 4 in. 4-5/16 in. 8-5/16 in. 35-204
Screwdriver #2 Phillips
Grip-n-Screw™ 6-7/8 in. 4-15/16 in. 11-1/4 in. 35-404
Screwdriver
Quick Rotating Screwdriver
Off-Set Screwdriver Set

• Ideal for threading screws in switches, fixtures and

anchors
• Quick and easy crank action

Blade Handle Overall

Description Part No. • 1/4 in. x 1/4 in. Slotted tips and #1 Phillips x #2
Length Length Length
Phillips tips
Cabinet Quick
Rotating 5-9/16 in. 3-3/4 in. 9-3/8 in. 35-200 • Designed to tighten fasteners in hard to reach
Screwdriver places

Phillips Quick Description Overall Length Part No.

Rotating 5-5/8 in. 4-5/16 in. 9-15/16 in. 35-203
Screwdriver Off-Set Screwdriver Set 4 in. 35-219

Heavy-Duty Heavy-Duty
Phillips Square Cabinet Cabinet Keystone Keystone Combo

B-35 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Nutmaster® Nut Drivers 2-Piece Stubby Nut Driver Set
• Includes: 1/4 in. Nut
Driver & 5/16 in.
Nut Driver
• For use in tight spaces
• Model 35-292 fits tan Twister® Wire Connector and
35-295 fits gray Twister® Wire Connectors
Blade Handle Overall
Description Part No.
Shank Handle Overall Part Length Length Length
Description
Length Length Length No.
2-Piece Nut Driver
1-1/2 in. 2-1/8 in. 3-5/8 in. 35-1299
3/16 in. 35-290 Stubby Set
1/4 in. 35-291

TOOLS & SUPPLIES

5/16 in. 35-292 7-Piece Nut Driver Set
11/32 in. 3 in. 4-5/16 in. 7-5/16 in. 35-293
3/8 in. 35-294
7/16 in. 35-295
1/2 in. 35-296

2-Piece Hollow-Shaft Nut Driver Set

Description Part No.

7-Piece Nut Driver Set 35-299
• Includes: 1/4 in. Nut Driver & 5/16 in. Nut Driver
Set Includes:
• Long shanks useful in deep electrical boxes 3/16 in. 35-290
Shank Handle Overall 1/4 in. 35-291
Description Part No.
Length Length Length
5/16 in. 35-292
2-Piece Nut 11/32 in. 35-293
5-15/16 in. 4-5/16 in. 10-1/4 in. 35-1302
Driver Set
3/8 in. 35-294
7/16 in. 35-295
1/2 in. 35-296

Quick-Change Screwdriver
• Patented Sure-Loc™ Quick Change chuck securely holds bits
• Built-in bit storage container in handle holds up to five extra
insert bits
• Bits fit most standard multi-bit screwdrivers
• E-Z Spin™ high torque rotating flip cap

Description Blade Length Handle Length Overall Length Part No.

Quick Change Screwdriver (Driver only) 35-932
33-Piece Quick Change Screwdriver Set - Quick Change
35-933
Screwdriver and 32-Piece Tamper-Proof Bit Block 3-1/16 in. 4-3/16 in. 7-1/4 in.
33-Piece Quick Change Screwdriver Set - Quick Change
35-934
Screwdriver and 32-Piece Standard Bit Block
32-Piece Tamper-Proof Bit Block 35-933TP
32-Piece Standard Bit Block 35-933STD

IDEALIND.COM • 800-435-0705 | B-36

 Adjustable Torque Screwdriver
• Includes adjustable torq range of up to 36 in. lbs.
(bi-directional accuracy, +/- 6%)
• Used for assembly and maintenance applications
in accordance to 2017 NEC
NEW 1/4 in. bit holder
accepts many
• Unique torque limiting bits, sockets and
clutch disengages once adapters.
preset torque is reached
• Kit contains: - Dual metric and
Torque Screwdriver imperial torque
#1, #2 Phillips Bits scale displays
#1 and #2 Square Bits precise setting
TOOLS & SUPPLIES

1/4 in., 3/16 in. Slotted for versatility

Bits
Protective
vinyl cap

Description Part No. Torque key accurately

controls torque
Adjustable Torque Screwdriver Kit, 0-36 in. lbs. 35-936 adjustment.

Slim Electronics Screwdrivers

• Designed for maximum handling
comfort when working in tight
areas
• Tough, chrome vanadium steel
shank
• Phosphate tip for long life
• Color-coded cap for easy
identification

Description Blade Length Handle Length Overall Length Part No.

Cabinet, 3/32 in. 2-1/2 in. 6-1/16 in. 36-240
Cabinet, 3/32 in. 3 in. 6-9/16 in. 36-241
Cabinet, 1/8 in. 4 in. 7-9/16 in. 36-242
Cabinet, 1/8 in. 6 in. 3-9/16 in. 9-9/16 in. 36-243
Cabinet, 5/32 in. 4 in. 7-9/16 in. 36-244
Cabinet, 5/32 in. 6 in. 9-9/16 in. 36-245
Phillips, #0 2-1/2 in. 6-1/16 in. 36-246
7-Piece Set includes one each of 36-240 thru 36-246 36-248
4-Piece Set includes one each of 36-240, 36-241, 36-242, & 36-246 36-249

B-37 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

INDUSTRIAL SCREWDRIVER BITS & ACCESSORIES
• S2M tool steel, custom heat treated for strength and durability
• All tips are manufactured to tight tolerances to ensure accurate
fit and full fastener engagement
• Insert bits have a retaining ring notch
• Power bits have a power locking groove
• 1/4 in. hex body
• Fit most standard multi-bit screwdrivers and power drills

TOOLS & SUPPLIES

DESIGNED FOR
PRECISION
FIT
Power Bits AND LASTING
PERFORMANCE
Power Locking
Groove
Insert Bits

1/4 in. Hex

Body

Retaining Ring
Notch
All tips are
manufactured to
tight tolerances
to ensure
accurate fit and
full fastener
engagement

Combo Head™ Slotted Double Ended Phillips Square Torx®

Torx® is a registered trademark of Acument Intellectual Properties, LLC.

IDEALIND.COM • 800-435-0705 | B-38

 Combo Head™ Bits Torx® Bits
• Patented design tip fits most Phillips screws • Manufactured to tight tolerances to ensure
accurate fit and full fastener engagement
Part No. Part No.
Description
(Carded) (Bulk) Part No. Part No.
Description
Combo Drive #2, 1 in. Insert Bit 78-0105 78-0105-25 (Carded) (Bulk)

Combo Drive #2, 2 in. Power Bit 78-0106 78-0106-25 Torx® 20, 1 in. Insert Bit 78-0226 —
Torx 25, 1 in. Insert Bit
®
78-0227 —
Slotted Bits Torx 27, 1 in. Insert Bit
®
78-0228 —
Part No. Part No. Torx® 30, 1 in. Insert Bit 78-0229 —
Description
(Carded) (Bulk)
7 pc. Torx Bit Set in Holder
®
78-0100 —
TOOLS & SUPPLIES

Slotted 1/4 in., 1 in. Insert Bit 78-0209 ­— Torx is a registered trademark of Acument Intellectual Properties, LLC.
®

Slotted 1/4 in., 2 in. Power Bit 78-0210 —

Slotted 1/8 in., 1 in. Insert Bit 78-0211 —
Tamper-Proof Torx® Bits
Slotted 1/8 in., 2 in. Power Bit 78-0212 —
Slotted 3/16 in., 1 in. Insert Bit 78-0213 78-0213-25 Part No. Part No.
Description
(Carded) (Bulk)
Slotted 3/16 in., 2 in. Power Bit 78-0214 78-0214-25
TP Torx® T20, 1 in. Insert Bit 78-0230 —­­
Slotted 7/32 in., 1 in. Insert Bit — 78-0215-25
TP Torx T25, 1 in. Insert Bit
®
78-0231 —
Slotted 7/32 in., 2 in. Power Bit — 78-0216-25
TP Torx® T27, 1 in. Insert Bit 78-0232 —

Double-Ended Bits TP Torx® T30, 1 in. Insert Bit 78-0233 —

7 pc. Tamper-Proof Torx Bit ®
Part No. Part No. 78-0101 —
Description Set in Holder
(Carded) (Bulk)
Torx® is a registered trademark of Acument Intellectual Properties, LLC.
DE Slotted 1/4 in. x #2 Phillips 78-0102 78-0102-25
DE Slotted 1/4 in. x #2 Square 78-0103 ——
DE Square #2 Square x #2 Phillips — 78-0104-25
Phillips Bits
Part No. Part No.
Description
Magnetic Bit Holder (Carded) (Bulk)

• Slender extension with powerful magnet to grasp Phillips #1, 1 in. Insert Bit 78-0200 78-0200-25
and hold bits Phillips #1, 2 in. Power Bit 78-0201 78-0201-25
Part No. Part No. Phillips #2, 1 in. Insert Bit 78-0202 78-0202-25
Description
(Carded) (Bulk)
Phillips #2, 2 in. Power Bit 78-0203 78-0203-25
Magnetic Bit Holder, 4 in. 78-0107 —
Phillips #3, 1 in. Insert Bit 78-0205 78-0205-25
Magnetic Bit Holder, 6 in. 778-0108 78-0108-10
Phillips #3, 2 in. Power Bit 78-0206 78-0206-25

Socket Adapter Square Bits

Part No. Part No.
Description Part No. Part No.
(Carded) (Bulk) Description
(Carded) (Bulk)
Socket Adapter, 1 in. Insert Bit 78-0217 78-0217-25
Square #1, 1 in. Insert Bit 78-0219 78-0219-25
Socket Adapter, 2 in. Power Bit 78-0218 —
Square #1, 2 in. Power Bit 78-0220 78-0220-25

Magnetic Nut Setter Square #2, 1 in. Insert Bit 78-0221 78-0221-25
Square #2, 2 in. Power Bit 78-0222 78-0222-25
• Variety of sizes for multiple applications
Square #2, 6 in. Power Bit 78-0223 —
Part No. Part No.
Description Square #3, 1 in. Insert Bit 78-0224 78-0224-25
(Carded) (Bulk)
Square #3, 2 in. Power Bit 78-0225 78-0225-25
Magnetic Nut Setter, 1/4 in. 78-0111 78-0111-10
Magnetic Nut Setter, 3/8 in. 78-0113 78-0113-10
Magnetic Nut Setter, 5/16 in. 78-0114 78-0114-10
Magnetic Nut Setter 3 pk. 1/4
78-0112 —
in., 3/8 in., 5/16 in.

B-39 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

INSULATED TOOLS
• Double insulated, 1,000V certified Serrated jaws
• Meets ASTM F1505-01 and IEC 60 900 standards provide secure
gripping surface
• Complies with OSHA 1910.335 regulations and
NFPA 70E standards High carbon
tool steel for
• UL and VDE classified and certified precision
(Pliers and Wire Strippers) durability Cutting jaws and
• Serrated jaws provide secure gripping surface edges are laser
hardened for
• Cutting jaws and edges laser hardened for greater strength
greater

TOOLS & SUPPLIES

and durability
strength and durability
• High carbon tool steel for precision durability
• Non-slip guard for added safety
• High visibility ergonomic handles for maximum Non-slip guard
comfort and control for added
safety
• Textured handles provide a sure grip and
are resistant to perspiration, water, oil
and chemicals
High visibility
ergonomic handles
Permanently bonded
for maximum
double insulated
comfort and control
handles
for added safety

Pliers & Wire

Stripper
only Textured handles
provide a sure
grip and are
resistant to
perspiration,
water, oil and
chemicals

Our insulated pliers and wire stripper are the first to have successfully passed UL classification
requirements. Recognized as the undisputed leader in product safety and certification, UL has developed
rigorous safety standards for 1000V insulated tools. In order to carry the UL classified mark, tools must be
tested by UL to met these standards.

Whenever possible, always de-energize lines and equipment prior to working on or around them. 1000V insulated
tools are designed only to reduce the chance of injury where the tool may make contact with an energized source. Work around
energized circuits should only be done when absolutely necessary and only by qualified technicians. Property damage, personal
injury or death may result if the following warnings are not heeded:
• Do not use any insulated tool if the insulation cracks, breaks or becomes damaged in any way. Destroy all dual-layer tools if the
inner yellow layer shows through the orange outer layer.
• Do not touch the uninsulated portion of an insulated tool or any conductive object when either might contact an energized
source.
• Tools must be kept clean and dry for proper insulating properties.
• Always inspect insulated tools before use.
• Use additional protection by wearing protective clothing and approved eye protection.
• Always use tools that are specifically designed for the task.
• These tools meet UL 22PP, ASTM F1505-01 and IEC 60 900 standards for insulated tools.
• Always follow OSHA 1910 S and NFPA 70E safety requirements when doing electrical work.

IDEALIND.COM • 800-435-0705 | B-40

�
 INSULATED SCREWDRIVERS & NUT DRIVERS
IDEAL insulated screwdrivers and nutdrivers are VDE certified
to 1000V AC. Each one is designed to meet ASTM F1505-01, EN, DIN
and IEC 60 900 test standards.
• Tempered blades are finished with black oxide and super
hardened for maximum quality
• Precision ground tips provide secure fit for less spin-out
• Meets OSHA requirements for insulated tools (29 CFR 1910)
TOOLS & SUPPLIES

Precision-ground
tips provide secure
fit for less spin-out

Molded-on insulation
provides permanent
bonding

Tempered chrome
vanadium tool steel
blades are super
hardened for maximum
quality

Cutting Jaws Impact-Resistant Safety Finger Guard

Induction hardened cutting edges Designed for the most rugged job Reduces chance of accidental
for precise cuts and long life. site conditions. contact with exposed metal tool
parts.

B-41 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

9-Piece Insulated Tool Kit Standard Insulated Tool Kit

TOOLS & SUPPLIES

Description Part No. Description Part No.
9-Piece Insulated Tool Kit (Case Included) 35-9108 Standard Insulated Tool Kit (Case Included) 35-9101
Kit Includes: Kit Includes:
9-1/4 in. Insulated Linesman Pliers 30-9430 9-1/4 in. Insulated Linesman Pliers 30-9430
8 in. Insulated Diagonal Cutting Pliers w/angled Safe-T-Grip Fuse Puller, Medium
®
34-002
35-9029
head
8 in. Insulated Diagonal Cutting Pliers
35-9029
8-1/2 in. Insulated Long-Nose Pliers 35-9038 w/angled head
Insulated T®-Stripper Wire Stripper 45-9120 8-1/2 in. Insulated Long-Nose Pliers 35-9038
Slotted 7/32 in. x 5 in. Insulated Screwdriver 35-9147 9-1/2 in. Insulated Cable Cutter 35-9052
Slotted 1/4 in. x 4 in. Insulated Screwdriver 35-9150 Slotted 1/4 in. x 4 in. Insulated Screwdriver 35-9150
Slotted 1/4 in. x 6 in. Insulated Screwdriver 35-9151 Slotted 1/4 in. x 6 in. Insulated Screwdriver 35-9151
Phillips #1 x 3-3/16 in. Insulated Screwdriver 35-9193 Slotted 5/16 in. x 7 in. Insulated Screwdriver 35-9166
Phillips #2 x 4 in. Insulated Screwdriver 35-9194 Slotted 3/8 in. x 8 in. Insulated Screwdriver 35-9168
Phillips #1 x 3-3/16 in. Insulated Screwdriver 35-9193
Basic Insulated Tool Kit Insulated Skinning Knife 35-9340
10 in. Insulated Tongue & Groove Pliers 35-9420
Safety Lockout Padlock, Red 44-916
Circuit Breaker Lockout 44-956
Circuit Breaker Lockout 44-957
Insulated T -Stripper Wire Stripper
®
45-9120
VoltSensor™ Non-Contact Voltage Tester 61-063

Description Part No.

Basic Insulated Tool Kit (Case Included) 35-9100
Kit Includes:
9-1/4 in. Insulated Linesman Pliers 30-9430
Safe-T-Grip® Fuse Puller, Medium 34-002
8 in. Insulated Diagonal Cutting Pliers w/angled head 35-9029
8-1/2 in. Insulated Long-Nose Pliers 35-9038
9-1/2 in. Insulated Cable Cutter 35-9052
Slotted 1/4 in. x 4 in. Insulated Screwdriver 35-9150
Slotted 1/4 in. x 6 in. Insulated Screwdriver 35-9151
Phillips #2 x 4 in. Insulated Screwdriver 35-9194
Safety Lockout Padlock, Red 44-916
Circuit Breaker Lockout 44-956
Circuit Breaker Lockout 44-957
Insulated T®-Stripper Wire Stripper 45-9120

IDEALIND.COM • 800-435-0705 | B-42

 Journeyman Insulated Tool Kit 9-Piece Insulated Screwdriver Set
TOOLS & SUPPLIES

Description Part No.

9-Piece Insulated Screwdriver Set
Description Part No. 35-9103
(Case included)
Journeyman Insulated Tool Kit (Case Included) 35-9102 Set Includes:
Kit Includes: Slotted 7/32 in. x 5 in. Insulated Screwdriver 35-9147
9-3/4 in. Insulated Multi-Crimp Tool 30-9429 Slotted 1/4 in. x 4 in. Insulated Screwdriver 35-9150
9-1/4 in. Insulated Linesman Pliers 30-9430 Slotted 1/4 in. x 6 in. Insulated Screwdriver 35-9151
Safe-T-Grip Fuse Puller, Medium
®
34-002 Slotted 5/16 in. x 7 in. Insulated Screwdriver 35-9166
8 in. Insulated Diagonal Cutting Pliers Slotted 3/8 in. x 8 in. Insulated Screwdriver 35-9168
35-9029
w/angled head
Phillips #1 x 3-3/16 in. Insulated Screwdriver 35-9193
8-1/2 in. Insulated Long-Nose Pliers 35-9038
Phillips #2 x 4 in. Insulated Screwdriver 35-9194
9-1/2 in. Insulated Cable Cutter 35-9052
Phillips #3 x 6 in. Insulated Screwdriver 35-9196
Slotted 1/4 in. x 4 in. Insulated Screwdriver 35-9150
Square #0 x 4 in. Insulated Screwdriver 35-9690
Slotted 1/4 in. x 6 in. Insulated Screwdriver 35-9151
Slotted 5/16 in. x 7 in. Insulated Screwdriver 35-9166 2-Piece Insulated Screwdriver Set
Slotted 3/8 in. x 8 in. Insulated Screwdriver 35-9168
Phillips #1 x 3-3/16 in. Insulated Screwdriver 35-9193
Phillips #2 x 4 in. Insulated Screwdriver 35-9194
Phillips #3 x 6 in. Insulated Screwdriver 35-9196
3/16 in. x 5 in. Insulated Nut Driver 35-9290
1/4 in. x 5 in. Insulated Nut Driver 35-9291 Description Part No.

5/16 in. x 5 in. Insulated Nut Driver 35-9292 2-Piece Insulated Screwdriver Set 35-9305

3/8 in. x 5 in. Insulated Nut Driver 35-9294 Set Includes:

7/16 in. x 5 in. Insulated Nut Driver 35-9295 Slotted 1/4 in. x 4 in. Insulated Screwdriver 35-9150
1/2 in. x 5 in. Insulated Nut Driver 35-9296 Phillips #2 x 4 in. Insulated Screwdriver 35-9194
Insulated Skinning Knife 35-9340
10 in. Insulated Tongue & Groove Pliers 35-9430
Safety Lockout Padlock, Red 44-916
Circuit Breaker Lockout 44-956
Circuit Breaker Lockout 44-957
Insulated T -Stripper Wire Stripper
®
45-9120
VoltSensor™ Non-Contact Voltage Tester 61-063

B-43 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

7-Piece Insulated Nut Driver Set Insulated Screwdrivers

Blade
Description Part No.
Length
7/32 in. Slotted Insulated Screwdriver 5 in. 35-9147
3/32 in. Slotted Insulated Screwdriver 3 in. 35-9148
1/8 in. Slotted Insulated Screwdriver 4 in. 35-9149
1/4 in. Slotted Insulated Screwdriver 4 in. 35-9150

TOOLS & SUPPLIES

Description Part No. 1/4 in. Slotted Insulated Screwdriver 6 in. 35-9151

7-Piece Insulated Nut Driver Set (Case included) 35-9104 5/16 in. Slotted Insulated Screwdriver 7 in. 35-9166

Set Includes: 3/8 in. Slotted Insulated Screwdriver 8 in. 35-9168

3/16 in. x 5 in. Insulated Nut Driver 35-9290 #0 Phillips Insulated Screwdriver 2-3/8 in. 35-9169

1/4 in. x 5 in. Insulated Nut Driver 35-9291 #1 Phillips Insulated Screwdriver 3-1/8 in. 35-9170

5/16 in. x 5 in. Insulated Nut Driver 35-9292 #3 Phillips Insulated Screwdriver 6 in. 35-9172
#1 Phillips Insulated Screwdriver 3-3/16 in. 35-9193
3/8 in. x 5 in. Insulated Nut Driver 35-9294
#2 Phillips Insulated Screwdriver 4 in. 35-9194
7/16 in. x 5 in. Insulated Nut Driver 35-9295
#3 Phillips Insulated Screwdriver 6 in. 35-9196
1/2 in. x 5 in. Insulated Nut Driver 35-9296
#0 Square Insulated Screwdriver 4 in. 35-9690
9/16 in. x 5 in. Insulated Nut Driver 35-9297
#1 Square Insulated Screwdriver 6 in. 35-9691
#2 Square Insulated Screwdriver 6 in. 35-9693
Insulated Tool Kit Cases #3 Square Insulated Screwdriver 6 in. 35-9695

Insulated Nut Drivers

Description Blade Length Part No.

Description Part No. 3/16 in. Insulated Nut Driver 35-9290

Soft Zipper Case for Basic Kit (35-9100 & 35-9108) 35-9350 1/4 in. Insulated Nut Driver 35-9291

Soft Zipper Case for Standard Kit (35-9101) 35-9351 5/16 in. Insulated Nut Driver 35-9292

Soft Zipper Case for Journeyman Kit (35-9102) 35-9352 11/32 in. Insulated Nut Driver 35-9293
5 in.
3/8 in. Insulated Nut Driver 35-9294
7/16 in. Insulated Nut Driver 35-9295
1/2 in. Insulated Nut Driver 35-9296
9/16 in. Insulated Nut Driver 35-9297

IDEALIND.COM • 800-435-0705 | B-44

 Insulated Multi-Crimp Tool Insulated Cable Cutter

Description Part No. Description Part No.

9-3/4 in. Insulated Multi-Crimp Tool 30-9429 9-1/2 in. Insulated Cable Cutter 35-9052
TOOLS & SUPPLIES

Insulated Linesman Pliers Insulated Tongue and Groove Pliers

Description Part No. Description Part No.

9-1/4 in. Insulated Linesman Pliers 30-9430 10 in. Insulated Tongue and Groove Pliers 35-9420

Insulated Diagonal-Cutting Pliers Insulated T®-5 Wire Stripper

Description Part No. Description Part No.

8 in. Insulated Diagonal Cutting Pliers Insulated T -Stripper Wire Stripper
®
45-9120
35-9029
w/angled head
10-18 AWG solid or 12-20 AWG stranded.

Insulated Long-Nose Pliers Insulated Skinning Knife

Description Part No. Description Part No.

8-1/2 in. Insulated Long-Nose Pliers 35-9038 Insulated Electrician’s Skinning Knife 35-9340

B-45 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Safe-T-Grip® Fuse Pullers Fuse Pullers

34-001
34-015

34-002

34-016
• Molded of tough, high-impact nylon for strength
34-003
• No-slip gripping surface and protective finger
• Maximum efficiency and convenience for stops for added safety

TOOLS & SUPPLIES

removing or replacing cartridge-type fuses
Overall
• Three sizes handle fuses ranging from 0 to 600A Description Part No.
Length
• Fully insulated, high-dielectric, glass-filled Small Puller for 0 to 30A/250V, 1/4 in.
polypropylene construction 5 in. 34-015
to 1/2 in. dia. fuses
• Notched handles provide safe, no-slip grip Large Puller for 0 to 100A/250V & 0 to
7-1/4 in. 34-016
• Clearly marked amperage ranges 60A/600V, 9/16 in. to 1 in. dia. fuses

• Exceed MIL specifications

Fuse Puller Cross Reference
Overall Part
Description Fuse Size Current Voltage IDEAL Bussmann Littlefuse
Length No.
Ferrule Type Amps Volt a.c.
Small Puller for 250V, 9/32 in. to 1/2 in. 1/4 x 1-1/4 1/500 to 30 250 34-015 FP-A3 97023
5 in. 34-001
dia. fuses 13/32 x 1-1/2 1/10 to 30 250 34-001, 34-015 FP-2 MFP
34-002, 34-012,
Medium Puller for 0 to 100A/250V & 9/16 x 2 1/10 to 30 250 FP-2 LPFP
7-1/2 in. 34-002 34-016
600V, 1/2 in. to 1 in. dia. fuses 34-016, 34-003,
13/16 x 3 35 to 60 250 FP-2 LPFP
34-012
Large Puller for 31 to 600A/250V & 31 to Knife Blade Amps Volt a.c.
11-3/4 in. 34-003
400A/600V, 3/4 in. to 2-1/2 in. dia. fuses 34-012, 34-002,
1 x 5-7/8 70 to 100 250 FP-3 LPFP
34-016
1-1/2 x 7-1/8 110 to 200 250 34-003 FP-3 LPFP
Fuse Puller & Test Light 2 x 8-5/8 225 to 400 250 34-003 FP-4 GFP
2-1/2 x 10-3/8 450 to 600 250 34-003 FP-4 GFP
Ferrule Type Amps Volt a.c.
34-001, 34-012,
13/32 x 1-1/2 1/10 to 30 600 FP-2 MFP
34-016
3/4 x 5 1/10 to 30 600 34-002 FP-2 MFP
34-012, 34-002,
1 x 5-1/2 35 to 60 600 FP-3 MFP
34-016
Knife Blade Amps Volt a.c.
• Convenient pocket-sized tool safely pulls
1-1/4 x 7-1/8 70 to 100 600 34-003 FP-3 LPFP
cartridge fuses and checks electrical connections
1-3/4 x 9-5/8 110 to 200 600 34-003 FP-4 LPFP
• Test prods fit parallel and tandem slot 2-1/2 x 11-5/8 225 to 400 600 34-003 FP-4 LPFP
receptacles 3 x 13-3/8 450 to 600 600 NONE NONE NONE
• Built-in resistors limit current flow to eliminate
false indication
• For 9/16 in. to 1 in. fuses, 100A/250V and 60A/600V
Please visit our website at idealind.com
• Test capacity from 100V to 600V AC/DC for more safety products from IDEAL!
Description Part No. • Insulated Tools • Streetlight Kits
• Lockout/Tagout • Testers
Fuse Puller & Test Light 34-012
• Fish Tapes • Safety Tapes & Signs

IDEALIND.COM • 800-435-0705 | B-46

 TOOL CARRIERS / POUCHES / BACKPACKS

Premium Leather Line

Top of the line tool carriers are handcrafted from top-grain
cowhide and slow tanned in natural oils to enhance the
leather’s inherent strength. Each bag is hand waxed for lasting
protection against stains and moisture and is warranted for life.
Available in natural or black leather.
TOOLS & SUPPLIES

• Rust-resistant, plated-steel hardware and heavy,

lock-stitched nylon thread for long-term durability

Standard Leather Line

Leather that stands up to the job like no other material, these tool
carriers are constructed of top-grain, natural cowhide and tanned
for added strength and durability. Color ages to a deep tan over
the years.
• Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability

Fabric Line
Durable, functionable, portable line of fabric carriers
provide the perfect tool storage.

B-47 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Tuff-Tote® Ultimate Tool Carriers Tuff-Tote® Tool Pouches
35-950 35-950BLK 35-311
35-975 35-975BLK 35-325

• 8 in. square tool carrier features 2 divided inside • 8-pocket, belt-mounted pouch features large Utility
compartments with 6 screwdriver loops, 1 large compartment with 2 dividers and 6 screwdriver loops,

TOOLS & SUPPLIES

center compartment, 4 outside pockets and 8 7 outside pockets, release snaps and tape chain and
outside tool loops for easy identification and access removable shoulder strap
• Oil and moisture-resistant reinforced bottom • Tunnel belt loop accommodates belts up to
2-1/4 in. wide
Description Part No.
Premium Leather Carrier w/shoulder strap 35-975 Description Part No.

Premium Black Leather Carrier w/shoulder strap 35-975BLK Premium Leather Pouch w/shoulder strap 35-950
Standard Leather Carrier w/shoulder strap 35-325 Premium Black Pouch w/shoulder strap 35-950BLK
Standard Leather Pouch w/shoulder strap 35-311
Tuff-Tote® Tool Carrier
• Convenient 6 in. x 8 in. tool carrier Electrician’s Tool Pouch
with4 center screwdriver slots, 2
interior compartments, 2 divided • Seven-pocket tool pouch
outside pockets and 4 outside tool • Full length belt tunnel
loops
• Chain tape lanyard
• Unique stand-alone design keeps
tool standing upright for easy Description Part No.
identification and access
Standard Leather Electrician’s Tool Pouch 10-466
• Oil and moisture-resistant
reinforced bottom
Shoulder Straps
Description Part No.
Premium Leather Carrier w/shoulder strap 35-969

Ergo Tool Pouch 35-965 35-338 35-965BLK

• Compact ergonomic design for • Nickel-plated hardware for long-term durability
versatility and superior comfort and corrosion resistance
• Large tool holding capacity • 2-in. wide shoulder pad for added comfort
• Rust-resistant, plated-steel hardware
and heavy, lock-stitched nylon thread Description Part No.
for long-term durability Premium Leather Strap 35-965
Description Part No. Standard Leather Strap 35-338
Standard Natural Leather Ergo Tool Pouch 35-312 Premium Black Leather Strap 35-965BLK

Hip Holster Tool Pouch Belts

• Compact, six-pocket holster
• Heavy-duty leather construction
• Riveted corners for long life 35-995 35-316 10-398
• Tape measure holder • Nickel-plated hardware for long-term durability
and corrosion resistance
Description Part No. Description Part No.
Premium Hip Holster Tool Pouch 35-784BLK Leather Belt - 2 in. x 48 in. 35-995
Leather Belt - 1-3/4 in. x 46 in. 35-316
Web Belt 10-398
IDEALIND.COM • 800-435-0705 | B-48
 Dual Compartment Tool Backpack
IDEAL® Dual Compartment Tool Backpack provides a solution for any tradesman needing to transport
tools while still having their hands free. The versatile design includes two compartments that can open
to a lay-flat position for flexible use on the floor, bench or hoist position.
NEW
Constructed from durable fabric with heavy-duty YKK® zippers that can survive the heavy loads of
everyday use. The reinforced comfort back and lumbar padding, with airflow design, provides maximum
comfort and includes adjustable padded shoulder and chest straps. The heavy-duty abrasion resistant reinforced base
with four ABS foot pads are designed to protect your tools from the elements without discomfort to your lower back.

Specifications
Features
• 26 interior pockets and 11 webbed loops Construction Details
TOOLS & SUPPLIES

• Tall tool carrier on side panel for tools up to 18 in. Dimensions 13.5 in. L x 9.5 in. W x 18 in. H
• Adjustable shoulder and chest straps Weight 5.62 lbs.
• Double slotted sleeve can accommodate fish tapes Durable and Lightweight 1200D
or extension cords Main Material
Ballistic Polyester
• Nickel plated tape measure clip Front Double Slotted
Durable 1680D Ballistic Polyester
• Mesh water bottle carrier Sleeve Material

• D-ring attachments for tethering Fleece lined, padded and

Laptop Sleeve
compatible with 15” laptops
• Water-resistant pouch
Airflow back and
Reinforced comfort padding
lumbar panel

Description Part No. Four molded feet Abrasion resistant

Dual Compartment Tool Backpack 35-409 Ratings 50 lb. maximum hoist capability

Adjustable shoulder and

chest straps with 1 in.
Dual Compartments D-rings
unzip open for full access
to all tools for flexibility
in use on floor, bench or Tall tool carrier
hoist position. for tools up to
18 in., such as
hammers or
wrenches
Nickle-plated tape
measure clip

Interior
• 21-tiered pocket design to hold a wide selection of tools
from screwdrivers , pliers and wrenches to meters
Mesh water
• Four angled slots to hold hex keys bottle carrier
• Water-resistant pouch can hold bits, small wrenches and
as zipper access from both ends.
Reinforced base with
• 11 webbed tool holders to hold large long tools, marking four molded ABS foot
pens or voltage testers pads to protect your
tools and electronics
YKK® is a registered trademark of the YKK Corporation, No. 1, Kanada from the elements
Izumi-Cho Chiyoda-Ku, Tokyo, Japan

B-49 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Large Mouth Bags Zipper Pouches
• Top opens completely for easy • Durable, water resistant
access to large tools — reinforced material
to hold itself open
• Heavy duty, self-repairing
• Measures 9 in. wide x 12 in. deep zippers
with outside and inside pockets
for convenient hand tool storage
Description Part No.
• Rugged zipper closure helps prevent
tool loss 10-1/2 in. Zipper Pouch 35-402

• Removable shoulder strap 12-1/2 in. Zipper Pouch 35-403

• Durable multi-ply construction

Divider Pouch™ Small Parts Bag

TOOLS & SUPPLIES

Description Part No.
• Designed to provide perfect
Large Mouth Bag - 13 in. long 35-410 small parts storage — keeps
Large Mouth Bag - 16 in. long 35-418
parts separate and organized
• Six internally divided 5-in. deep
Large Mouth Bag - 18 in. long 35-427
pockets
• Convenient drawstring protects
Journeyman Electrician’s Tote™ Tool Bag contents from spillage
Note: Wire
• Compact and versatile design • Convenient handle loop connectors sold
separately.
• Carry as a hand-tote, shoulder- • Sized to stack in 5-gallon buckets
tote or tool-belt
• Durable nylon polyester construction
• Includes removable shoulder
strap and belt Description Part No.
• Durable multi-ply construction Divider Pouch™ Small Parts Bag 35-655

Description Part No.

Supplies Apron
Journeyman Electrician’s Tote™ Tool Bag 35-462
• Two pockets for connectors
and fasteners, each 8 in. x 15 in.
Master Electrician’s Tote ™
• Natural duck construction
• Spacious and durable design
Description Part No.
• Organizes and displays tools
for fast access Supplies Apron 35-474
• Includes removable shoulder strap
• Durable multi-ply construction Pocket Pal® Tool Holster
• Protects pocket from sharp tools
Description Part No.
• Doubles tool carrying capacity
Master Electrician’s Tote™ 35-441
• Can be worn in pocket or on belt

Mechanic’s Tool Bag Description Part No.

• Eight narrow inside pockets Pocket Pal Tool Holster
®
35-505
designed to hold small tools
• Two side pockets with
closeable snaps for large
tools or loose items
• Double inside liner and rigid
bottom prevent bag distortion
• Durable nylon polyester construction

Description Part No.

Mechanic’s Tool Bag 35-535

IDEALIND.COM • 800-435-0705 | B-50

 TOOL KITS
17-Piece Master Electrician’s Kit 16-Piece Master Electrician’s Kit
w/Tool Carrier w/Pouch
TOOLS & SUPPLIES

Description Part No.

Description Part No.
16-Piece Master Electrician’s Kit 35-800
17-Piece Master Electrician’s Kit 35-809
Kit Includes:
Kit Includes:
9-1/4 in. Linesman Plier w/fish tape puller 30-430
9-1/2 in. Linesman Plier w/New England nose
30-3430
and crimping die 8 in. Diagonal-Cutting Pliers w/angled head 35-029
8-1/2 in. Long-Nose Pliers w/cutter 35-3038 8-1/2 in. Long-Nose Plier 35-038
9-1/2 in. Tongue & Groove Pliers 35-3420 9-1/2 in. Cable Cutter 35-052
9-1/2 in. Cable Cutter 35-3052 Twist-a-Nut™ Conduit Deburring Tool 35-083
Kinetic™ Reflex™ T -Stripper Wire Stripper
®
45-915 1/4 in. x 4 in. Cushioned-Grip Slotted round
35-164
shank Screwdriver
7-in-1 Twist-a-Nut™ Screwdriver 35-908
#2 x 4 in. Cushioned-Grip Phillips Screwdriver 35-194
Phillips #1 x 3 in. Cushioned-Grip Screwdriver 35-193
Electrician’s Hammer 35-210
Phillips #2 x 4 in. Cushioned-Grip Screwdriver 35-194
25’ Auto-Lock Tape Measure 35-242
3/16 in. x 6 in. Cushioned-Grip Slotted Cabinet
35-186
Tip Screwdriver Electrician’s Knife 35-285
1/4 in. x 4 in. Cushioned-Grip Slotted round Standard Leather Pouch w/shoulder strap 35-311
35-164
shank Screwdriver
10-1/2 in. Tongue and Groove Plier 35-430
3/16 in. x 6 in. Cushioned-Grip Screw holding
35-406 7-in-1 Twist-a-Nut™ Screwdriver 35-908
Slotted Screwdriver
Hawkbill Knife 35-286 T -Stripper Wire Stripper
®
45-120

Electrician’s Hammer 35-210 Vol-Con Voltage/Continuity Tester

®
61-076

25’ Auto-Lock Tape Measure 35-242 Replacement Battery 61-201

Torpedo Level 35-205

Vol-Con Voltage/Continuity Tester
®
61-076
Tuff-Tote Premium Leather Tool Carrier
®
35-975

B-51 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

16-Piece Master Electrician’s Kit 13-Piece Journeyman Electrician’s Kit
w/Large Mouth Bag w/Electrician’s Tote

TOOLS & SUPPLIES

Description Part No.
16-Piece Master Electrician’s Kit 35-808
Description Part No.
Kit Includes:
13-Piece Journeyman Electrician’s Kit 35-790
Combo Crimp/Strip Tool 30-428
Kit Includes:
Pocket Fuse Puller 34-002
9-1/2 in. Linesman Plier w/New England nose
30-3430
9-1/2 in. Linesman Plier w/New England nose, and crimping die
30-430
crimping die and fish tape puller
Fuse Puller, Medium 34-002
8-1/2 in. Long-Nose Pliers w/cutter 35-038
8-1/2 in. Long-Nose Pliers w/cutter 35-3038
9-1/2 in. Cable Cutter 35-052
1/4 in. x 4 in. Cushioned-Grip Slotted round
35-164
1/4 in. x 4 in. Cushioned-Grip Slotted round shank Screwdriver
35-164
shank Screwdriver
3/16 in. x 4 in. Cushioned-Grip Slotted Cabinet
35-186
3/16 in. x 6 in. Cushioned-Grip Slotted Cabinet Tip Screwdriver
35-186
Tip Screwdriver
#1 x 3 in. Cushioned-Grip Phillips Screwdriver 35-193
#1 x 3 in. Cushioned-Grip Phillips Screwdriver 35-193
#2 x 4 in. Cushioned-Grip Phillips Screwdriver 35-194
#2 x 4 in. Cushioned-Grip Phillips Screwdriver 35-194
Torpedo Level 35-205
Electrician’s Hammer 35-210
25’ Auto-Lock Tape Measure 35-242
25’ Auto-Lock Tape Measure 35-242
Hawkbill Knife 35-286
Ergonomic Hacksaw 35-261
9-1/2 in. Tongue & Groove Plier 35-3420
Hawkbill Knife 35-286
Kinetic™ Reflex™ T -Stripper Wire Stripper
®
45-915
10-1/2 in. Tongue and Groove Plier 35-430
Journeyman Electrician’s Tote ®
35-462
Reflex™ T®-5 T®-Stripper Wire Stripper 45-415
18 in. Large Mouth Bag 35-427

IDEALIND.COM • 800-435-0705 | B-52

 12-Piece Journeyman Electrician’s Kit 6-Piece Electrician’s
w/Tool Pouch Holster Kit

Description Part No.

6-Piece Electrician’s Holster Kit 35-794
TOOLS & SUPPLIES

Kit Includes:
9-1/4 in. Linesman Plier w/fish tape puller 30-430
25’ Auto-Lock Tape Measure 35-242
Utility Knife 35-300
Pocket Pal® Tool Holster 35-505
Description Part No. 7-in-1 Twist-a-Nut™ Screwdriver 35-908
12-Piece Journeyman Electrician’s Kit 35-5805 T -5 T -Stripper Wire Stripper
® ®
45-120
Kit Includes:
Web Belt 10-398
5-Piece Electrician’s Holster Kit
Electrician’s Leather Tool Pouch 10-466
9-1/2 in. Linesman Plier w/New England nose,
30-430
crimping die and fish tape puller
8 in. Diagonal-Cutting Pliers 35-028
8-1/2 in. Long-Nose Plier 35-038
Description Part No.
1/4 in. x 4 in. Cushioned-Grip Slotted round
35-164
shank Screwdriver 5-Piece Electrician’s Holster Kit 35-5792
3/16 in. x 4 in. Cushioned-Grip Slotted Cabinet Kit Includes:
35-184
Tip Screwdriver
9-1/4 in. Linesman Plier w/fish tape puller 30-430
#1 x 3 in. Cushioned-Grip Phillips Screwdriver 35-193
3/16 in. x 6 in. Cushioned-Grip Slotted Cabinet
#2 x 4 in. Cushioned-Grip Phillips Screwdriver 35-194 35-186
Tip Screwdriver
25’ Auto-Lock Tape Measure 35-242 #2 x 4 in. Cushioned-Grip Phillips Screwdriver 35-194
8-1/2 in. Tongue & Groove Pliers 35-420 Pocket Pal® Tool Holster 35-505
Premium T -5 T -Stripper Wire Stripper
® ®
45-120 Premium T -5 T -Stripper Wire Stripper
® ®
45-120

4-Piece Electrician’s Holster Kit

Description Part No.
4-Piece Electrician’s Holster Kit 35-5799
Kit Includes:
9-1/2 in. Linesman Plier w/New England nose
30-430
and crimping die
Pocket Pal® Tool Holster 35-505
11-in-1 Screwdriver/Nutdriver 35-910
Premium T®-5 T®-Stripper Wire Stripper 45-120

B-53 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

CUTTING SUPPLIES
Understanding an industry takes years of dedication and focus. At IDEAL Electrical, we are committed
to delivering high quality, innovative products to professional electricians. Our power tool accessories are
specifically designed with the professional electrician in mind. Experience less down time on the work site
and get a superior cost-per-cut advantage with IDEAL.

Carbide-Tipped Hole Cutters Step Drills

Sheet Metal Brass
Stainless Steel Carbon Steel

TOOLS & SUPPLIES

Aluminum Cast Iron
Brass Stainless Steel

Drill Taps

NEW
Bi-Metal Hole
Saws
Metal
Plastics
Wood NEW Multi-Purpose Hole Saws
Composite Enclosures
Ceiling Tile
Cement Board
Wood

Auger Bits
Wood

Wood Boring Bits

Wood

Reciprocating Blades
Metal Wood Flexible Drill Bits
Ceramic Tile Steel Steel
Drywall Wood
Fiberglass
General Purpose

IDEALIND.COM • 800-435-0705 | B-54

 Drill Taps with SmoothStart™ Tip
The IDEAL® line of combination drill taps combines the tasks of drilling, tapping and deburring all
into one. Providing an economical way to save you valuable time on the project.
Constructed out of High Speed Steel (HSS) providing strength and durability, the bit has balanced
NEW
hardened tapping edges with ¼” hex shank that makes it compatible not only with cordless drills
but also impact drivers.
Similar to the IDEAL® TKO™ Carbide Tipped Hole Cutters we have incorporated the SmoothStart™ tip which minimizes
thread damage and extends the life of the bits.
While traditional drill taps have single or double flute design, IDEAL® Drill taps come with 3-flute design providing faster chip
removal and minimizes binding while drilling. The deburring cutting edge provides a clean hole and prevents over drilling.
Rated for drilling and tapping up to 10 gauge mild steel, aluminum, copper, brass and even plastic. When it comes to quality,
performance and durability, IDEAL® is the professional’s choice for drill tap needs.
TOOLS & SUPPLIES

1/4 in. Hex Shank

36-6/32 36-8/32 36-10/24 36-10/32 36-12/24 36-1/4-20

Description Part No.

Deburring Cutting 6-32 NC Drill Tap/Bit 36-6/32

Edge 8-32 NC Drill Tap/Bit 36-8/32
10-24 NC Drill Tap/Bit 36-10/24
12-24 NC Drill Tap/Bit 36-12/24

Hardened Tapping 1/4-20 NC Drill Tap/Bit 36-1/4-20

Edges Hex key size is 3mm.

Split Point
SmoothStart™ Tip

Description Part No.

3-flute Design 8-Piece Drill Bit Kit (Case included) 36-600

Kit Includes: Part No.
6-32 NC Drill Tap/Bit 1 36-6/32
8-32 NC Drill Tap/Bit 2 36-8/32
10-24 NC Drill Tap/Bit 1 36-10/24
12-24 NC Drill Tap/Bit 1 36-12/24
1/4-20 NC Drill Tap/Bit 2 36-1/4-20

B-55 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Carbide-Tipped Hole Cutters
TKO™ Hole Cutters offer the most efficient and clean
cutter replacement for traditional knockouts, by making
smooth holes in a fraction of the time at a fraction of the
cost. Specifically designed to cut sheet metal, TKO cutters
will even cut stainless steel with fine grained, carbide
tips. The innovative design includes the exclusive
SmoothStart™ replaceable pilot drill, which guides the
cutter to the surface, avoiding cutter damage and IDEAL TKO™ Competitor
providing smoother holes. An integral overdrill flange IDEAL provides smooth, precise holes
prevents cutter penetration beyond the sheet metal. (holes cut with 1-1/8 in. cutters)
When it comes to quality, performance and durability,

TOOLS & SUPPLIES

IDEAL is the professional’s choice for carbide tipped 4-Piece TKO™ Carbide-Tipped
hole cutters. Hole Cutter Kit
Hole Size Conduit & Pipe Size Part No.
Description Part No.
3/4 in. (19mm) — 36-300
4-Piece Carbide Hole
1/2 in. (22mm) - push 36-311
7/8 in. (22mm) 36-301 Cutter Kit
button
Kit Includes: Part No.
1 in. (25mm) — 36-302
1-1/8 in. (29mm) 3/4 in. (19mm) 36-303 7/8 In. Hole Cutter 36-301

1-1/4 in. (32mm) — 36-304 1-1/8 in. Hole Cutter 36-303

1-3/8 in. (35mm) 1 in. (25mm) 36-305 1-3/8 in. Hole Cutter 36-305
1-7/32 in. (30mm) - push SmoothStart™ Pilot Bit 36-312
1-7/32 in. (30mm) 36-313
button
Convenient carrying case included. Hex key size is 3mm.
1-7/16 in. (37mm) — 36-306
1-1/2 in. (38mm) — 36-307
1-3/4 in. (44mm) 1-1/4 in. (32mm) 36-308
8-Piece TKO™ Carbide-Tipped
2 in. (51mm) 1-1/2 in. (38mm) 36-309
Hole Cutter Master Electrician’s Kit
2-1/2 in. (64mm) 2 in. (50mm) 36-310 Description Part No.
2-7/8 in. (73mm) 2-1/2 in. (64mm) 36-315 8-Piece Carbide Hole Cutter Kit 36-314
3-1/2 in. (89mm) 3 in. (76mm) 36-316 Kit Includes: Part No.
4 in. (102mm) 3-1/2 in. (89mm) 36-317
7/8 In. Hole Cutter 36-301
4-1/2 in. (114mm) 4 in. (102mm) 36-318
1-1/8 in. Hole Cutter 36-303
3/8 in. Shank on all hole cutters. Max. material thickness is 1/8 in.
1-3/8 in. Hole Cutter 36-305
1-3/4 in. Hole Cutter 36-308
SmoothStart™ Replacement
2 in. Hole Cutter 36-309
Pilot Drill 36-312
2-1/2 in. Hole Cutter 36-310
• Guides cutter to surface
providing smoother SmoothStart™ Pilot Bit 36-312
holes and cutter Convenient carrying case included. Hex key size is 3mm.
damage 36-369

Fits Hole Overall

Diameter Drill Depth Part No.
Saws: Length
3/4 in. to 1/4 in. 3/4 in.
2 in. (51mm) 36-312
3-1/2 in. (6mm) (19mm)
4 in. and 5/16 in. 3/4 in. 2-3/8 in.
36-369*
4-1/2 in. (8mm) (19mm) (60mm)
Drilling depth: 3/16 in. (5mm); Effective length: 1/2 in. (12mm)
*For use with 36-317 and 36-318.

IDEALIND.COM • 800-435-0705 | B-56

 Carbide-Tipped Hole Cutters

BEST Integrated arbor provides

smooth, accurate holes
CHOICE FOR
LONGER LIFE
Integrated overdrill flange
prevents penetration beyond
the sheet metal
TOOLS & SUPPLIES

Carbide tips cut up to 1/8 in.

Ejection spring
thick steel and outperforms HSS
effortlessly
cutters and bi-metal hole saws in
ejects slug
sheet steel
Exclusive
SmoothStart™
pilot drill guides
cutter
Low RPM recommended for longer life.

See how IDEAL TKO™ can save time...

Total time using the Total time using the

IDEAL TKO™ competitors’ knockout tool
30 Seconds More than 6 Minutes
Chuck Step Drill Pilot Hole
Drill

Chuck Cutter

00:10 00:10 00:30

Assemble
knockout punch Ratchet
& stud pull

Drill hole
&  store
02:00 04:20
00:30 Slug removed,
disassemble
& store

06:20

B-57 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG

Bi-Metal Hole Saws 1-7/8 in.

• Constructed from M42 high speed steel NEW (48mm)

Depth of Cut
with 8% premium cobalt content,
resulting in high-strength, greater wear
resistance and less prone to chipping
Fleem Ground
• Rigid solid steel back plate for clean true holes and
Teeth, 4/6 variable
longer tool life
pitch configuration
• Unique fleem ground teeth design results in
improved performance and efficient chip removal
• 4/6 variable pitch geometry cuts down on harmonic
noise to minimize tooth strippage Wide diamond
eyes, aids in
• Featuring a 1-7/8 in. depth of cut, reducing cutting

TOOLS & SUPPLIES

plug removal
time with a single pass design
Solid steel backing
• Diamond sides provide quick plug removal, plate means no
available on 7/8 in. to 6 in. hole saws need for drive plate
Cats eye opening for
• Cats eye openings on solid back plate provide line easy plug removal
of sight and aid in plug removal, available in 2 in. to and provides line of
6 in. hole saws sight

Bi-Metal Hole Pipe Entrance Bi-Metal Hole Pipe Entrance

Pipe Tap Size Part Pipe Tap Size Part
Saw Diameter Size Saw Diameter Size
No. No.
Inches MM Inches MM Inches MM Inches MM Inches MM Inches MM
Compatible with 1/4 in. Round Arbor 36-570, 3/8 in. Hex 2-1/8 54 36-535
Arbor 36-571, 7/16 in. Hex Arbor 36-572. 2-1/4 57 2 51 36-536
9/16 14 36-511 2-5/16 59 36-537
5/8 16 36-512 2-3/8 60 36-538
11/16 17 36-513 2-1/2 64 2 51 36-539
3/4 19 ½ 13 3/8 10 36-514 2-9/16 65 36-540
13/16 21 36-515 2-5/8 67 2-1/2 64 36-541
7/8 22 ¾ 19 1/2 13 36-516 2-3/4 70 36-542
15/16 24 36-517 2-7/8 73 36-543
1 25 36-518 3 73 2-1/2 64 36-544
1-1/8 27 1 25 3/4 19 36-520 3-1/8 79 36-545
1-3/16 29 36-521 3-1/4 83 3 76 36-546
Compatible with 7/16 in. Hex Arbor 36-573, 3/8 in. Quick 3-3/8 86 36-547
Change Arbor 36-574.
3-1/2 89 36-548
1-1/4 32 36-522
3-5/8 92 3 76 36-549
1-5/16 33 36-523
3-3/4 95 3-1/2 89 36-550
1-3/8 35 1 25 36-524
3-7/8 98 36-551
1-7/16 37 36-525
4 102 36-552
1-1/2 38 1-1/4 32 36-526
4-1/8 104 3-1/2 89 36-553
1-9/16 40 36-527
4-1/4 108 4 102 36-554
1-5/8 41 36-528
4-3/8 111 36-555
1-11/16 43 36-529
4-1/2 114 36-556
1-3/4 44 1-1/2 38 1-1/4 32 36-530
4-3/4 121 4-1/2 114 4 102 36-557
1-13/16 46 36-531
5 127 36-558
1-7/8 48 36-532
5-1/2 140 5 127 36-559
2 51 1-1/2 38 36-533
5-3/4 146 36-560
2-1/16 52 36-534
6 152 36-561

IDEALIND.COM • 800-435-0705 | B-58

 Bi-Metal Hole Saw Kits
TOOLS & SUPPLIES

36-500 36-501 36-502

8-Piece Bi-Metal Hole Saw Kit 14-Piece Bi-Metal Hole Saw Kit 19-Piece Bi-Metal Hole Saw Kit
Hole Saws Included in Kits
Hole Saws (in.) Hole Saw Arbors
Part No.
3/4 7/8 1 1-1/8 1-3/8 1-1/2 1-3/4 2 2-1/4 2-1/2 3 3-5/8 4-1/8 4-1/2
36-573 36-570 36-572 36-577
36-514 36-516 36-518 36-520 36-524 36-526 36-530 36-533 36-536 36-539 36-544 36-549 36-553 36-556
36-500 • • • • • • • •
36-501 • • • • • • • • • • • • • •
36-502* • • • • • • • • • • • • • • • • •
*Includes two 3-1/4 in. x 1/4 in. Pilot Bits (36-576).

Bi-Metal Hole Saw Replacement Bi-Metal Hole Saw Arbors

Pilot Bits

36-576 36-575

36-570 35-571 36-572 36-573 36-574

With split point design, replacement pilot drill bits
Durable, solid steel construction provides years of long
constructed out of high speed steel will start on
life performance. Flat head set screw in body allows
initial contact for faster penetration and less walking
easy replacement of the pilot drill bit. Save valuable
for smooth, fast, cutting experience.
time through versatile design with the quick change
arbor. Instantly change hole saws without tools and
Description Part No.
without having to remove the arbor from the chuck.
4-1/8 in. x 1/4 in. - Fits 36-570 Arbor 36-575
Description Part No.
3-1/4 in. x 1/4 in. - Fits 36-571, 36-572, 36-573 and
36-576 1/4 in. Round Arbor for 9/16 in. - 1-3/16 in. 36-570
36-574 Arbors
3/8 in. Hex Arbor for 9/16 in. - 1-3/16 in. 36-571
Arbor Extensions 7/16 in. Hex Arbor for 9/16 in. - 1-3/16 in. 36-572
7/16 in. Hex Arbor for 1-1/4 in. - 6 in. 36-573
3/8 in. Quick Change Arbor for 1-1/4 in. - 6 in. 36-574
For boring jobs that require a longer reach, arbor
extension adds up to 12 in. of usable length and
can easily be connected to the IDEAL® line of
Bi-metal Hole Saw Arbors.

Description Part No.

12 in. Extension for 7/16 in. Arbors 36-577
Not for use with TKO™ Hole Cutters, Step Drills or Augers.

B-59 | IDEAL ELECTRICAL 2018 FULL LINE CATALOG