Chapter
Chapter 44
Product, Process, and Service Design
1
Overview
Designing and Developing Products and Services
Process Planning and Design
Major Factors Affecting Process Design Decisions
Types of Process Designs
Interrelationships Among Product Design, Process
Design, and Inventory Policy
Process Design in Services
Deciding Among Processing Alternatives
Wrap-Up: What World-Class Companies Do
2
Product/Service Design
When a product/service is designed:
The detailed characteristics of the product/service are
established.
The characteristics of the product/service directly
affects how the product/service can be produced/
delivered.
How the product/service is produced/delivered
determines the design of the production/delivery
system.
3
Product/Service Design
Product/service design directly affects:
Product/service quality
Production/delivery cost
Customer satisfaction
4
Product/Service Design and Development
Sources of Product Innovation
Developing New Products/Services
Getting Them to Market Faster
Improving Current Products/Services
Designing for Ease of Production
Designing for Quality
Designing and Developing New Services
5
Sources of Product/Service Innovation
Customers
Managers
Marketing
Operations
Engineering
Research and Development (R&D)
Basic research
Applied research
6
Steps in Developing New Products
1. Technical and economic feasibility studies
2. Prototype design
3. Performance testing of prototype
4. Market sensing/evaluation and economic evaluation
of the prototype
5. Design of production model
6. Market/performance/process testing and economic
evaluation of production model
7. Continuous modification of production model
7
Steps in Developing New Products
1. Technical and Economic Feasibility Studies
Determine the advisability of establishing a project
for developing the product
If initial feasibility studies are favorable, engineers
prepare an initial prototype design
8
Steps in Developing New Products
2. Prototype Design
This design should exhibit the basic form, fit, and
function of the final product
It will not necessarily be identical to the
production model
9
Steps in Developing New Products
3. Performance Testing of Prototype
Performance testing and redesign of the prototype
continues until this design-test-redesign process
produces a satisfactorily performing prototype
10
Steps in Developing New Products
4. Market Sensing/Evaluation and Economic
Evaluation of the Prototype
Accomplished by demonstrations to potential
customers, market test, or market surveys
If the response to the prototype is favorable,
economic evaluation of the prototype is
performed to estimate production volume, costs,
and profits
If the economic evaluation is favorable, the
project enters the production design phase.
11
Steps in Developing New Products
5. Design of Production Model
The initial design of the production model will not
be the final design; the model will evolve
12
Steps in Developing New Products
6. Market/Performance/Process Testing and Economic
Evaluation of Production Model
The production model should exhibit:
low cost
reliable quality
superior performance
the ability to be produced in the desired
quantities on the intended equipment
13
Steps in Developing New Products
7. Continuous Modification of Production Model
Production designs are continuously modified to:
Adapt to changing market conditions
Adapt to changing production technology
Allow for manufacturing improvements
14
Managing Product Development Projects
About 5% of all new-product ideas survive to
production, and only about 10% of these are
successful.
It is best to cancel unpromising new-product/service
development projects early!
Employees often become emotionally caught up in
these projects and are overly optimistic
An impartial management review board is needed for
periodic reviews of the progress of these projects.
15
Getting New Products to Market Faster
Speed creates competitive advantages
Speed saves money
Tools to improve speed:
Autonomous design and development teams
Computer-aided design/computer-aided
manufacturing (CAD/CAM)
Simultaneous (concurrent) engineering
16
Tools to Improve Speed to Market
Autonomous Design and Development Teams
Teams are given decision-making responsibility
and more freedom to design and introduce new
products/services
Time-to-market has been slashed dramatically
Enormous sums of money have been saved
Teams do not have to deal with the bureaucratic
red tape ordinarily required to obtain approvals
17
Tools to Improve Speed to Market
Computer-Aided Design/Computer-Aided
Manufacturing (CAD/CAM)
Engineers, using CAD/CAM, can generate many
views of parts, rotate images, magnify views, and
check for interference between parts
Part designs can be stored in a data base for use on
other products
When it is time for manufacturing, the product
design is retrieved, translated into a language that
production machinery understands, and then the
production system can be automatically set up.
18
Tools to Improve Speed to Market
Simultaneous Product/
(Concurrent) Service Ideas
Engineering Continuous
Interaction
Economic and Technical
Feasibility Studies
Product/Service Design Production Process Design
Produce and Market
New Product/Service
19
Improving the Design
of Existing Products/Services
Focus is improving performance, quality, and cost
Objective is maintaining or improving market share
of maturing products/services
Little changes can be significant
Small, steady (continuous) improvements can add up
to huge long-term improvements
Value analysis is practiced, meaning design features
are examined in terms of their cost/benefit (value).
20
Designing for Ease of Production
Ease of Production (Manufacturability)
Specifications - Precise information about the
characteristics of the product
Tolerances - Minimum & maximum limits on a
dimension that allows the item to function as
designed
Standardization - Reduce variety among a group of
products or parts
Simplification - Reduce or eliminate the complexity
of a part or product
21
Designing for Quality
Crucial element of product design is its impact on
quality
Quality is determined by the customer’s perception of
the degree of excellence of the product/service’s
characteristics
Chapter 7 covers the principles of designing
products/services for quality
22
Designing and Developing New Services
Three general dimensions of service design are:
Degree of Standardization of the Service
Custom-fashioned for particular customers or
basically the same for all customers?
Degree of Customer Contact in Delivering the Service
High level of contact (dress boutique) or low level
(fast-food restaurant)?
Mix of Physical Goods and Intangible Services
Mix dominated by physical goods (tailor’s shop) or
by intangible services (university)?
23
Designing and Developing New Services
Differences Between New Service and New Product
Development
Unless services are dominated by physical goods,
their development usually does not require
engineering, testing, and prototype building.
Because many service businesses involve
intangible services, market sensing tends to be
more by surveys rather than by market tests and
demonstrations.
24
Process
Planning and Design
25
Process Planning and Design System
Inputs:
• Product/Service Information
• Production System
Information
• Operations Strategy
Process Planning & Design:
• Process-Type Selection
• Vertical Integration Studies Outputs:
• Process
• Process/Product Studies
• Equipment Studies Technology
• Facilities
• Production Procedures Studies
• Personnel
• Facilities Studies
Estimates
26
Major Factors Affecting Process Designs
Nature of product/service demand
Degree of vertical integration
Production flexibility
Degree of automation
Product/Service quality
27
Nature of Product/Service Demand
Production processes must have adequate capacity to
produce the volume of the products/services that
customers need.
Provisions must be made for expanding or
contracting capacity to keep pace with demand
patterns.
Some types of processes are more easily expanded
and contracted than others.
Product/service price affects demand, so pricing
decisions and the choice of processes must be
synchronized.
28
Degree of Vertical Integration
Vertical integration is the amount of the production
and distribution chain that is brought under the
ownership of a company.
This determines how many production processes need
to be planned and designed.
Decision of integration is based on cost, availability
of capital, quality, technological capability, and more.
Strategic outsourcing (lower degree of integration) is
the outsourcing of processes in order to react quicker
to changes in customer needs, competitor actions, and
technology.
29
Production Flexibility
Product flexibility -- ability of the production (or
delivery) system to quickly change from producing
(delivering) one product (or service) to another.
Volume flexibility -- ability to quickly increase or
reduce the volume of product( or service) produced
(or delivered).
30
Degree of Automation
Advantages of automation
Improves product quality
Improves product flexibility
Reduces labor and related costs
Disadvantages of automation
Equipment can be very expensive
Integration into existing operations can be difficult
31
Product/Service Quality
Old viewpoint – high-quality products must be made
in small quantities by expert craftsmen
New viewpoint – high-quality products can be mass-
produced using automated machinery
Automated machinery can produce products of
incredible uniformity
The choice of design of production processes is
affected by the need for superior quality.
32
Types of Process Designs
Product-Focused
Process-Focused
Group Technology/Cellular Manufacturing
33
Product-Focused
Processes (conversions) are arranged based on the
sequence of operations required to produce a product
or provide a service
Also called “Production Line” or “Assembly Line”
Two general forms
Discrete unit – automobiles, dishwashers
Process (Continuous) – petrochemicals, paper
34
Product-Focused
Raw Material Components
22 4 Su
Co ba
m ss
po em
n. .
Assemblies Fin. Goods
1 3 5 7
Raw Material Components Subassem.
s
lie
mb
Purchased
se
Product/Material
1 Flow
As
6
Production Operation Components,
Subassemblies
35
Product-Focused
Advantages
Lower labor-skill requirements
Reduced worker training
Reduced supervision
Ease of planning and controlling production
Disadvantages
Higher initial investment level
Relatively low product flexibility
36
Process-Focused
Processes (conversions) are arranged based on the
type of process, i.e., similar processes are grouped
together
Products/services (jobs) move from department
(process group) to department based on that particular
job’s processing requirements
Also called “Job Shop” or “Intermittent Production”
Examples
Auto body repair
Custom woodworking shop
37
Process-Focused
Custom Woodworking Shop
Cutting Planing Shaping Assembly Sanding Finishing
11 22 55 66 77
Job A 22 33
Job B 33 44
11 44 55 66
Drilling Turning
38
Process-Focused
Advantages
High product flexibility
Lower initial investment level
Disadvantages
Higher labor-skill requirements
More worker training
More supervision
More complex production planning and controlling
39
Group Technology/Cellular Manufacturing
Group Technology
Each part produced receives a multi-digit code that
describes the physical characteristics of the part.
Parts with similar characteristics are grouped into
part families
Parts in a part family are typically made on the
same machines with similar tooling
40
Group Technology/Cellular Manufacturing
Cellular Manufacturing
Some part families (those requiring significant
batch sizes) can be assigned to manufacturing
cells.
The organization of the shop floor into cells is
referred to as cellular manufacturing.
Flow of parts within cells tend to be more like
product-focused systems
41
Group Technology/Cellular Manufacturing
Advantages (relative to a job shop)
Process changeovers simplified
Variability of tasks reduced (less training needed)
More direct routes through the system
Quality control is improved
Production planning and control simpler
Automation simpler
42
Group Technology/Cellular Manufacturing
Disadvantages
Duplication of equipment
Under-utilization of facilities
Processing of items that do not fit into a family
may be inefficient
43
Group Technology/Cellular Manufacturing
Candidates for GT/CM are job shops having:
A degree of parts standardization
Moderate batch sizes
44
Product/Process Design & Inventory Policy
Standard Products and Produce to Stock
Sales forecasts drive production schedule
Maintain pre-determined finished-goods levels
MRP forecast drives material ordering
Custom Products and Produce to Order
Orders set production schedule and drive material
deliveries
Design time (preproduction planning) may be
required before production can be scheduled
45
Process Design in Services
Some of the factors important in process design for
products are also important in services:
Nature (level and pattern) of customer demand
Degree of vertical integration
Production flexibility
Degree of automation
Service quality
46
Process Design in Services
Three schemes for producing and delivering services
Quasi-Manufacturing
Customer-as-Participant
Customer-as-Product
47
Process Design in Services
Quasi-Manufacturing
Physical goods are dominant over intangible
service
Production of goods takes place along a production
line
Operations can be highly automated
Almost no customer interaction
Little regard for customer relations
Example – bank’s checking encoding operation
48
Process Design in Services
Customer-as-Participant
Physical goods may be a significant part of the
service
Services may be either standardized or custom
High degree of customer involvement in the
process
Examples: ATM, self-service gas station
49
Process Design in Services
Customer-as-Product
Service is provided through personal attention to
the customer
Customized service on the customer
High degree of customer contact
There is a perception of high quality
Customer becomes the central focus of the process
design
Examples: medical clinic, hair salon
50
Process Reengineering
The concept of drastically changing an existing
process design
Not merely making marginal improvements to athe
process
A correctly reengineered process should be more
efficient
A smaller labor force is often the result
51
Deciding Among Processing Alternatives
Batch Size and Product/Service Variety
Capital Requirements
Economic Analysis
Cost Functions of Alternative Processes
Break-Even Analysis
Financial Analysis
52
Process Design Depends
on Product Diversity and Batch Size
Product
Large
Focused,
Dedicated
Systems
Batch Size
Product
Focused,
Batch
System
Cellular
Manufacturing Process-Focused,
Small
Job Shop
Few Number of Product Designs Many
53
Capital Requirements
The amount of capital required tends to differ for
each type of production process
Generally, the capital required is greatest for product-
focused, dedicated systems
Generally, the capital required is lowest for process-
focused, job shops
The amount of capital available and the cost of capital
are important considerations
54
Economic Analysis
Cost Functions of Processing Alternatives
Fixed Costs
Annual cost when production volume is zero
Initial cost of buildings, equipment, and other
fixed assets
Variable Costs
Costs that vary with production volumes
Labor, material, and variable overhead
55
Cost Functions of Processing Alternatives
Annual Cost of Production ($000)
o p f.
Sh Ma n u
Job lula
r
Ce l
e m bly L ine
tom . A s s
2,000 Au
Automated
1,500 Assembly Line
Preferred
Cellular
1,000
Manufacturing
Job
Preferred Units
500 Shop
Preferred Produced
Per Year
100,000 250,000
56
Cost Functions of Processing Alternatives
Example
Three production processes (A, B, and C) have
the following cost structure:
Fixed Cost Variable Cost
Process Per Year Per Year
A $120,000 $3.00
B 90,000 4.00
C 80,000 4.50
What is the most economical process for a volume of
8,000 units per year?
57
Cost Functions of Processing Alternatives
Example
TC = FC + v(Q)
A: TC = 120,000 + 3.00(8,000) = $144,000 per year
B: TC = 90,000 + 4.00(8,000) = $122,000 per year
C: TC = 80,000 + 4.50(8,000) = $116,000 per year
The most economical process at 8,000 units is
Process C, with the lowest annual cost.
58
Economic Analysis
Break-Even Analysis
Widely used to analyze and compare decision
alternatives
Can be displayed either algebraically or
graphically
Disadvantages:
Cannot incorporate uncertainty
Costs assumed over entire range of values
Does not take into account time value of money
59
Break-Even Analysis
Example
Break-Even Points of Processes A, B, and C,
assuming a $6.95 selling price per unit
Q = FC / (p-v)
A: Q = 120,000 / (6.95 - 3.00) = 30,380 units
B: Q = 90,000 / (6.95 - 4.00) = 30,509 units
C: Q = 80,000 / (6.95 - 4.50) = 32,654 units
Process A has the lowest break-even point.
60
Economic Analysis
Financial Analysis
A great amount of money is invested in production
processes and these assets are expected to last a
long time
The time value of money is an important
consideration
Payback period
net present value
internal rate of return
Profitability index
61
Deciding Among Processing Alternatives
Assembly Charts (Gozinto Charts)
Macro-view of how materials are united
Starting point to understand factory layout needs,
equipment needs, training needs
Process Charts
Details of how to build product at each process
Includes materials needed, types of processes
product flows through, time it takes to process
product through each step of flow
62
Wrap-Up: World Class Practice
Fast new product introduction
Design products for ease of production
Refine forecasting
Focus on core competencies ... less vertical
integration
Lean production
Flexible automation
Job shops move toward cellular manufacturing
Manage information flow ..... automate and simplify!
63
End
End of
of Chapter
Chapter 44
64
