Scribd
Upload
17 views2 pages

Feed Back Sect02

The document contains a series of questions and answers related to the propulsion system, focusing on the thrust reverser 'C', access panels, and fire detection systems. Key topics include operational checks before opening ducts, hydraulic fluid types, and fire detection system locations. It also addresses alert levels generated by the fire detection system and the number of fire extinguishing bottles per engine.

Uploaded by

尹兴旺
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
17 views2 pages

Feed Back Sect02

The document contains a series of questions and answers related to the propulsion system, focusing on the thrust reverser 'C', access panels, and fire detection systems. Key topics include operational checks before opening ducts, hydraulic fluid types, and fire detection system locations. It also addresses alert levels generated by the fire detection system and the number of fire extinguishing bottles per engine.

Uploaded by

尹兴旺
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 2

PROPULSION SYSTEM FEEDBACK QUESTIONS

Q4 Is it possible to open the thrust reverser “C”


Q1 Where is the access panel for oil ducts when the fan cowl doors are closed ?
servicing located ?
A) Yes.
A) Fan cowl door left hand side.
B) No.
B) Thrust reverser “C” duct right hand
side.
Q5 What must be checked before opening the
C) Fan cowl door right hand side. thrust reverser “C” ducts ?
A) Ensure that the leading edge
Q2 What restrictions are imposed by the slats are retracted.
AMM when opening the fan cowl doors ?
B) Ensure that the thrust reverser
A) Engine temperature. is in the fully stowed position.

B) Wind speeds. C) Ensure that FADEC ground


power is off, leading edge slats
Q3 when opening and closing the thrust are retracted and the thrust
reverser “C” ducts when must the auxiliary reverser is in the stow position.
latch assembly (take up device) be used ?
Q6 What is the hydraulic fluid used in the
A) For the opening of the thrust hand pump that opens and closes the “C”
reverser “C” ducts. ducts ?

B) For the closing of the thrust reverser A) Engine oil.


“C” ducts.
B) Hydraulic oil.
C) For opening and closing of the thrust
reverser “C” ducts. C) Fuel.
Q7 Where is zone 1 located ? Q11 What alert level and message is generated to
the ECAM CRT when the fire detection system has
A) Engine fan case (intermediate case). operated ?
B) Core engine.
A) Alert class 1 level 3 and engine fire.
C) Upper pylon area.
B) Alert class 1 level 3 and engine overheat.
Q8 Where is the zone 2 located ? C) Alert class 1 level 2 and engine overheat.
A) Engine fan case (intermediate
case).
Q12 How many fire extinguishing bottles are
B) Core engine. there per engine ?
C) Upper pylon. A) One.
Q9 What is the fire detection system for the B) Two.
V2500 engine called ?
C) Three.
A) Systron Donner firewire system.
B) Fenwall fire cable system.
C) Graviner heat sensing elements.

Q10 Where is the fire detection system


located about the engine ?

A) Zone 1.
B) Zone 2.
C) Zone 1 and 2.

You might also like