1 Failure Modes Jobs nearby Kottayam

As a Technical Specialist (design and architecture) at Cochin (Kerala) location, your role involves: - Having knowledge and expertise on different domains such as Routing, Switching, Security, and DC network. You should also be proficient in managing Data Center and team effectively. - Demonstrating strong hands-on experience in designing and architecting Cisco SDWAN solutions and Cisco ACI. - Taking responsibility for all incident management issues, ensuring strict adherence to the bank's incident management policy, and implementing necessary steps for incident resolution. - Handling all documentation works related to infrastructure, including network diagrams, approval documents, etc. - Ensuring proper evaluation, testing, and implementation of all changes, following a strict change management policy. - Assessing the network infrastructure of critical locations of the bank (DC, DR & HO) and providing feedback for continuous improvement. - Providing guidance and troubleshooting critical day-to-day issues of the bank in case of team failure to resolve them on time. Qualifications required: - Any Graduate with CCIE R&S or Security certification is preferred. - Minimum 10+ years of experience in the field. - Proficiency in SDWAN (Viptela) and Cisco ACI is essential. The company is based in Cochin (Kerala) and follows a work from office mode on banking days, with deployment at client locations. The interview process consists of 2 rounds 1 at NTT and 1 at the client. The job type is full-time and permanent, with benefits including health insurance and Provident Fund. The work schedule involves rotational shifts at the in-person work location.,

As a Junior Engineer- Quality at Flex, your role involves working closely with the Engineering team to ensure supplier process capability meets the product and process requirements. You will be responsible for supporting the supplier approval process, new product launches, root cause analysis of quality issues, and continuous improvement initiatives using techniques like Lean, Six-Sigma, and Poka-Yoke. Your day-to-day tasks will include providing documentation of inspection results, monitoring supplier product quality, reporting on Key Performance Indicators, participating in cross-functional teams, and managing supplier cost recovery for quality issues. Additionally, you will be involved in internal and external audit readiness, undertaking special projects, contributing to continuous improvement activities, and conducting benchmarking studies. Qualifications Required: - B.E / B.Tech in ECE / EEE / IC / Mechanical / Mechatronics - 0-2 years of experience in APQP, PPAP, FMEA in a Manufacturing setup, preferably in EMS Industry - Lean Manufacturing knowledge - Knowledge of quality and business systems - Understanding of measurement techniques, engineering drawings, and manufacturing processes - Ability to work in a diverse and dynamic environment - Excellent written and oral communication skills in English In this role, you will receive benefits such as Health Insurance and PTO. If you are excited about this opportunity and possess the required qualifications, we encourage you to apply and be a part of our extraordinary team at Flex. As a Junior Engineer- Quality at Flex, your role involves working closely with the Engineering team to ensure supplier process capability meets the product and process requirements. You will be responsible for supporting the supplier approval process, new product launches, root cause analysis of quality issues, and continuous improvement initiatives using techniques like Lean, Six-Sigma, and Poka-Yoke. Your day-to-day tasks will include providing documentation of inspection results, monitoring supplier product quality, reporting on Key Performance Indicators, participating in cross-functional teams, and managing supplier cost recovery for quality issues. Additionally, you will be involved in internal and external audit readiness, undertaking special projects, contributing to continuous improvement activities, and conducting benchmarking studies. Qualifications Required: - B.E / B.Tech in ECE / EEE / IC / Mechanical / Mechatronics - 0-2 years of experience in APQP, PPAP, FMEA in a Manufacturing setup, preferably in EMS Industry - Lean Manufacturing knowledge - Knowledge of quality and business systems - Understanding of measurement techniques, engineering drawings, and manufacturing processes - Ability to work in a diverse and dynamic environment - Excellent written and oral communication skills in English In this role, you will receive benefits such as Health Insurance and PTO. If you are excited about this opportunity and possess the required qualifications, we encourage you to apply and be a part of our extraordinary team at Flex.

Role Overview: As an immediate opening for an Engineering position in Chennai, Tamil Nadu, your primary role will be to be a motivating team member and work towards achieving on-time sample submission. You should be capable of making all types of settings/programs in CNC Lathe for new components, ensuring the part quality meets customer/drawing requirements. Your responsibilities will include making cycle time/process estimations for new parts (CNC) to arrive at a quote, selecting tools and machine parameters as per part requirements in CNC Lathe, and developing turning components as per the time plan with minimum cycle time/cost. Additionally, you will be responsible for corrective and preventive actions for problems identified during the development of new CNC lathe components in the initial stage. You will also be required to identify and record lessons learned for controlling future development activities, analyze failure modes, and implement corrective and preventive actions. Key Responsibilities: - Be a motivating team member and work towards achieving on-time sample submission - Make all types of setting/programs in CNC Lathe for new components - Ensure part quality meets customer/drawing requirements - Make cycle time/process estimations for new parts (CNC) to arrive at a quote - Select tools and machine parameters as per part requirements in CNC Lathe - Develop turning components as per the time plan with minimum cycle time/cost - Take corrective and preventive actions for problems identified during the development of new CNC lathe components - Identify and record lessons learned for controlling future development activities - Analyze failure modes and implement corrective and preventive actions Qualifications Required: - DME/ITI/+2 with good working and setting experience in CNC Lathe - Knowledge in MS Office, working experience in CAD 2D/3D, and MS Office is an added advantage Preferred Industry: Sheet Metal, Machining,

As a Technician at HARMAN Automotive, you will be responsible for tracking defective units' receipt at the plant, conducting root cause analysis with Cross Functional Teams (CFT), and preparing analysis reports for sharing with all stakeholders. Your duties will also include documentation related to part receipt, inspection, and dispatch of refurbished parts. Key Responsibilities: - Coordinate with various CFTs for analysis and confirmation of root cause - Perform failure analysis on returned infotainment units using diagnostic tools such as oscilloscopes, multimeters, logic analyzers, and audio analyzers - Conduct visual inspections, X-ray, microscopy, and thermal imaging to detect physical defects - Document findings in failure analysis reports and support 8D problem-solving teams - Collaborate with design, manufacturing, and supplier quality teams to identify root causes and recommend corrective actions - Collect SW logs and interact with SW team for analysis - Connect with Customer Quality team for Zero KM issues closure and analysis - Maintain Tracker and update analysis progress daily - Interact with External Laboratories for Environmental testing - Develop testing mechanisms and setup for new products - Conduct vehicle level testing and collect logs at Dealership or Customer Line - Conduct DOE (Design of Experiments) and reliability testing for infotainment products - Maintain failure analysis lab equipment and ensure calibration and readiness - Assist in component-level rework, soldering, and PCB-level troubleshooting - Track and trend failure modes to support continuous improvement and warranty reduction initiatives Qualifications Required: - Excellent knowledge of Electronics product Analysis from SW & HW part - Experience in failure analysis, electronics testing, or repair, preferably in automotive infotainment or consumer electronics - Hands-on experience with electronic debugging tools and test benches - Familiarity with automotive communication protocols (CAN, LIN, MOST, Ethernet) is a plus - Basic understanding of SMT components, PCB layout, and circuit schematics - Strong documentation and communication skills HARMAN offers a flexible work environment with opportunities for full-time remote work globally, employee discounts on Harman and Samsung products, extensive training through HARMAN University, competitive wellness benefits, tuition reimbursement, employee recognition and rewards program, and an inclusive and diverse work environment that encourages professional and personal development. Join HARMAN, a company committed to innovation and empowering employees to bring their unique perspectives. Be a part of a culture that celebrates individuality and offers opportunities for training, development, and continuing education to help you thrive in your career. As a Technician at HARMAN Automotive, you will be responsible for tracking defective units' receipt at the plant, conducting root cause analysis with Cross Functional Teams (CFT), and preparing analysis reports for sharing with all stakeholders. Your duties will also include documentation related to part receipt, inspection, and dispatch of refurbished parts. Key Responsibilities: - Coordinate with various CFTs for analysis and confirmation of root cause - Perform failure analysis on returned infotainment units using diagnostic tools such as oscilloscopes, multimeters, logic analyzers, and audio analyzers - Conduct visual inspections, X-ray, microscopy, and thermal imaging to detect physical defects - Document findings in failure analysis reports and support 8D problem-solving teams - Collaborate with design, manufacturing, and supplier quality teams to identify root causes and recommend corrective actions - Collect SW logs and interact with SW team for analysis - Connect with Customer Quality team for Zero KM issues closure and analysis - Maintain Tracker and update analysis progress daily - Interact with External Laboratories for Environmental testing - Develop testing mechanisms and setup for new products - Conduct vehicle level testing and collect logs at Dealership or Customer Line - Conduct DOE (Design of Experiments) and reliability testing for infotainment products - Maintain failure analysis lab equipment and ensure calibration and readiness - Assist in component-level rework, soldering, and PCB-level troubleshooting - Track and trend failure modes to support continuous improvement and warranty reduction initiatives Qualifications Required: - Excellent knowledge of Electronics product Analysis from SW & HW part - Experience in failure analysis, electronics testing, or repair, preferably in automotive infotainment or consumer electronics - Hands-on experience with electronic debugging tools and test benches - Familiarity with automotive communication protocols (CAN, LIN, MOST, Ethernet) is a plus - Basic understanding of SMT components, PCB layout, and circuit schematics - Strong documentation and communication skills H

As a Quality Specialist at Konecranes, you will be a crucial part of the Quality team, focusing on the manufacturing and service industry. Your main responsibilities will include: - Inspection of incoming components and inspections at vendor end. - Verification of vendor inspection documents/certificates. - Witnessing NDT tests at vendor end/Verification of test certificates. - Preparation of QAP. - Rejection analysis, vendor rating, vendor communications. - Quality MIS. - Material inward and transfer in SAP along with goods receipt. - NC Handling. - Addressing customer warranty. To excel in this role, you should bring the following qualifications: - A degree/diploma in mechanical engineering or equivalent. - 2-4 years of experience in QA/QC/SQA. - Knowledge of forged, machined, Casted, and fabricated parts along with inspection methodologies. - Knowledge of Heat Treatment processes and Metallurgical properties of steel. - Understanding of manufacturing processes and identification of failure modes. - Ability to read and interpret Mechanical drawings and Electric circuit diagrams. - Hand-on experience in preparation of QAP/CP. - Well-versed in root cause analysis. - Ability to monitor NDT techniques like UT, LPT, RT interpretation and to verify Test certificates. - Well-versed with electrical components. - System (SAP) knowledge. - Ability to handle a small team. - Experience in the crane industry would be preferred but not mandatory. - Knowledge of ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018. As a Quality Specialist with Konecranes, you will be part of the Parts Distribution Centre of Konecranes and Demag Pvt Ltd., which is an exclusive business unit catering to the after-sales service support. You will have the opportunity to work with multiple commodities of products and the most advanced technology in material movement safety. Konecranes is a global leader in material handling solutions, committed to finding safer, more productive, and sustainable ways to serve customers across multiple industries. Konecranes is dedicated to creating a fair and discrimination-free environment for all employees and job applicants.,

Role Overview: As a Quality Control Manager in our company, your main responsibility will be to deploy and administer the incoming inspection processes for materials and goods supplied within your area of responsibility. You will conduct detailed inspections and tests using various measurement tools and techniques to assess the conformity of incoming materials. Additionally, you will identify and document any non-conformities or deviations from quality requirements and collaborate with cross-functional teams to initiate supply non-conformance management processes. Key Responsibilities: - Establish and manage the incoming quality control team and facility, ensuring the availability of necessary resources, equipment, and processes for effective inspection and verification of incoming goods before their release to the production/assembly unit. - Develop and implement comprehensive incoming quality control procedures, including detailed inspection plans, appropriate sampling methods, and reliable test protocols. - Lead, manage, and mentor the team of quality control professionals and technicians involved in the incoming quality control process, providing guidance, training, and support to enhance their technical skills and ensure their adherence to established quality standards. - Participate in maintaining the established quality management system to ensure adherence to quality standards. Maintain accurate and comprehensive documentation of incoming quality control activities, including inspection reports, test results, and material disposition records. - Support PPAP process by contributing to the testing of the First Articles and development of inspection plans for part approval. Ensure alignment between inspection plans and measurement capabilities. Verify supply compliance with relevant industry standards, specifications, and regulatory requirements. Qualifications Required: - Bachelor/Masters Degree in Engineering with relevant work experience. - Lean Six Sigma, Yellow Belt background is an added advantage. - Knowledge in Quality Management Systems and Auditing, Technical Drawing Interpretation GD&T, First Article Inspection, Component Manufacturing Process Capability Analysis for various technologies, Measurement System Analysis, Failure Mode Effect Analysis (DFMEA and PFMEA), SAP S/4 HANA Quality Module, Production Part Approval Process (PPAP). - Proficiency in both spoken & written English language is required.,

As a Quality Engineer, your role involves providing FMEA's and Control Plans, driving Continuous Improvement, performing audits, ensuring performance to workmanship standards, investigating and leading Corrective Actions, and planning, implementing, and coordinating corrective, preventive, and technical controls of processes and products. You will also develop and implement an effective quality system related to manufacturing elements, including quality planning, receiving inspection, and Quality Management System audits. Your key responsibilities will include: - Leading the identification of problem root cause and developing and implementing effective corrections and preventive methods - Participating in product and process development teams - Analyzing various failure reports and recommending corrective action - Collecting, analyzing, and reporting on various measurement statistics and metrics - Maintaining an interactive plant quality relationship focused on effective transition of product releases to a manufacturing quality support role - Facilitating the creation of control plans, process flows, and Process Failure Mode Effect Analysis (PFMEA) specific to new product development - Interface closely with Engineering, Service, Manufacturing, and Product Management to understand and improve product and service quality - Investigating and resolving QA projects as assigned - Ensuring communication and interaction with Supplier Quality - Participating as an Auditor of the Vertiv Quality Management System - Performing any other duties and responsibilities as assigned In terms of qualifications, you should have: Minimum Job Qualifications: - BA or BS or equivalent experience - Bachelor of Science in Mechanical Engineering, Industrial Engineering, Industrial and Systems Engineering, or other relevant degree preferred - No experience required with a bachelor's degree - Minimum of 5 years relevant experience in lieu of a degree Preferred Qualifications: - Excellent communication skills, both written and verbal - Proficient in MS Office - Ability to design special tooling, develop and manufacturing processes, and assess new manufacturing technologies - Highly adaptable with the ability to learn and apply new skills quickly - Possesses a strong work ethic and sets high standards for quality and quantity of work You should hold a Bachelor of Science in Mechanical Engineering, Industrial Engineering, Industrial and Systems Engineering, or other relevant degree. Additionally, the physical requirements of the role include heavy lifting (over 50 Ibs.), frequent standing, kneeling, crawling, stooping, bending, twisting, and climbing. Environmental demands may require protective equipment such as earplugs, gloves, eyewear, and safety-toed shoes/boots. Travel time of approximately 10% domestic/international may be required.,

Clean Harbors Inc. is a NYSE listed company with a dedicated workforce of 18,000 employees providing premier environmental, energy, and industrial services across the U.S., Canada, and Mexico. As the Global Capability Center (GCC) for Clean Harbors, Clean Harbors India is focused on serving tech-savvy business stakeholders and providing cutting-edge IT solutions and production support globally. **Role Overview:** As an Assistant Manager in the Program Management Office (PMO) focusing on Process Excellence, you will be part of a team that drives process improvement and quality initiatives with a global impact on the GCC. This individual contributor role based in Hyderabad will involve supporting operations and business units with professional services in various areas of specialization. **Key Responsibilities:** - Identify and support process improvement initiatives across functions - Apply methodologies like Lean, Six Sigma, VSM, and Process Reengineering to enhance efficiency - Collaborate with Operations team to prioritize and complete Improvement projects - Support training efforts on Continuous Improvement tools and techniques - Drive Quality Framework across GCC processes and ensure CAPA, CTQ, and error logs are maintained - Assist in Root Cause Analysis for escalations, quality, and efficiency issues - Participate in transition activities and risk identification/mitigation during process migrations - Devising and optimizing KPIs, updating Standard Operating Procedures (SOPs), and assisting in Governance meetings and leadership reporting **Qualifications Required:** - 8-10 years of relevant experience in process excellence & quality - Good analytical and problem-solving skills - Self-motivated with the ability to work independently and as a team - Excellent interpersonal skills and presentation skills - Certified Six Sigma Professional and understanding of Lean/ Kaizen/ VSM methodologies - Project Management certification and exposure to reporting tools, SQL, VBA, Excel, Macros & Automation Join Clean Harbors India as an Assistant Manager in Process Excellence to drive continuous improvement, quality initiatives, and transformation projects across GCC locations, making a significant impact on the organization's operations and business units. Clean Harbors Inc. is a NYSE listed company with a dedicated workforce of 18,000 employees providing premier environmental, energy, and industrial services across the U.S., Canada, and Mexico. As the Global Capability Center (GCC) for Clean Harbors, Clean Harbors India is focused on serving tech-savvy business stakeholders and providing cutting-edge IT solutions and production support globally. **Role Overview:** As an Assistant Manager in the Program Management Office (PMO) focusing on Process Excellence, you will be part of a team that drives process improvement and quality initiatives with a global impact on the GCC. This individual contributor role based in Hyderabad will involve supporting operations and business units with professional services in various areas of specialization. **Key Responsibilities:** - Identify and support process improvement initiatives across functions - Apply methodologies like Lean, Six Sigma, VSM, and Process Reengineering to enhance efficiency - Collaborate with Operations team to prioritize and complete Improvement projects - Support training efforts on Continuous Improvement tools and techniques - Drive Quality Framework across GCC processes and ensure CAPA, CTQ, and error logs are maintained - Assist in Root Cause Analysis for escalations, quality, and efficiency issues - Participate in transition activities and risk identification/mitigation during process migrations - Devising and optimizing KPIs, updating Standard Operating Procedures (SOPs), and assisting in Governance meetings and leadership reporting **Qualifications Required:** - 8-10 years of relevant experience in process excellence & quality - Good analytical and problem-solving skills - Self-motivated with the ability to work independently and as a team - Excellent interpersonal skills and presentation skills - Certified Six Sigma Professional and understanding of Lean/ Kaizen/ VSM methodologies - Project Management certification and exposure to reporting tools, SQL, VBA, Excel, Macros & Automation Join Clean Harbors India as an Assistant Manager in Process Excellence to drive continuous improvement, quality initiatives, and transformation projects across GCC locations, making a significant impact on the organization's operations and business units.

Role Overview: You will be responsible for handling market feedback and vehicle diagnosis related to strong hybrid and electric vehicle systems, including warranty parts analysis. Your main responsibilities will include utilizing FTA approach to solve complex market issues, verifying market feedback through simulation activities, coordinating with multiple product owners and process partners for faster analysis and execution of quality improvements, implementing and monitoring countermeasures, and conducting competitor process and design benchmarking. Key Responsibilities: - Utilize FTA approach for solving complex market issues - Verify market feedback and conduct simulation activities for defect reappearance - Coordinate with multiple product owners and process partners for faster analysis and execution of quality improvements based on market feedback - Implement and monitor countermeasures - Conduct competitor process and design benchmarking Qualification Required: - Good understanding of manufacturing process and design intent of hybrid/ev vehicles controller, BMS, inverters, and DC motors - Profound knowledge of hybrid/ev vehicle system functioning - Strong knowledge of controllers functioning logic and failure modes of controllers and DC motors - Knowledge of constructions of DC motors, BMS, inverters, high voltage vehicle electrical systems - Proficiency in QC tools and DOE - Analytical skills and logical approach towards problem-solving - Hands-on experience in resolving complex market problems and able to concisely explain and present to related stakeholders and management Additional Details: Omit this section as there are no additional details of the company mentioned in the job description.,

You will be responsible for executing maintenance activities to ensure high equipment availability. This includes predictive, preventive, and corrective measures. Additionally, you will maintain cleanliness and organization, manage records, support emergency responses for main turbine operations, and contribute to resource management and continuous improvement initiatives. **Key Responsibilities:** - Lead Mechanical Turbine Operational Excellence and Maintenance - Execute maintenance activities for predictive, preventive, and corrective measures to ensure equipment availability. - Maintain cleanliness and organization in the work environment. - Perform in-house maintenance of main turbine and support emergency handling. - Prepare Annual Overhaul (AOH) and Capital Overhaul (COH) reports within budget. - Resource Management - Assist in tracking manpower and material, ensuring accurate records. - Adhere to the resource plan for the turbine area, including allocation and utilization of resources. - Provide input for budget preparation and contribute to the development of Standard Maintenance Procedures (SMPs). - Manage inventory effectively and raise Purchase Requests (PRs) as needed. - Reporting and Continuous Improvement - Prepare reports for Root Cause Analysis (RCA), Failure Mode and Effects Analysis (FMEA), Zero Forced Outage (ZFO), and technical audits. - Provide inputs for Training Needs Identification (TNI) for continuous improvement. - Participate in training and audits for skill development of technicians and business associates. - Business Sustainability - Conduct safety trainings for contractors, ensuring compliance with guidelines. - Optimize resource utilization during work execution, prioritizing safety and quality standards. - Support quality checks, review material procurement, and ensure compliance with technical specifications. - Prepare safety compliance confirmations and utilize digital tools for efficient tracking. - Digitization and Automation - Support digitization strategies to optimize operational efficiency. - Implement automation solutions to support organizational goals. **Qualifications:** - Educational Qualification: B.tech/BE in Mechanical Engineering or equivalent degree from a recognized institution. - Work Experience: 5+ years of experience in power plant maintenance and management. - Preferred Industry: Thermal power generation, utilities, or energy sector.,

As a Mechanical Engineer at Aether Semiconductors, you will play a crucial role in our engineering team by designing, building, and testing electromechanical components. Your responsibilities will include supporting the full lifecycle of mechanical and electro-mechanical systems, utilizing CAD software for 3D modeling and drawings, designing components using various materials, and ensuring documentation adheres to SEMI standards and industry best practices for geometric dimensioning and tolerancing (GD&T). Additionally, you will conduct detailed analyses, feasibility studies, and test plans to validate design performance, prepare reports and technical presentations, collaborate with suppliers and internal teams, and provide technical guidance to junior engineers. Key Responsibilities: - Design, build, and test electromechanical components. - Support the full lifecycle of mechanical and electro-mechanical systems. - Use CAD software for 3D modeling and drawings. - Design components using various materials. - Ensure documentation adheres to SEMI standards and industry best practices for GD&T. - Conduct detailed analyses, feasibility studies, and test plans. - Collaborate with suppliers and internal teams. - Provide technical guidance to junior engineers. Qualifications: - Bachelors or Masters degree in Mechanical Engineering or a related field. - Minimum of 5 years of experience in mechanical design, concept finalization, and simulation. - Proficiency in Ansys, particularly in thermal analysis. - Highly proficient in 3D CAD tools such as CREO, Siemens NX, ProE, SolidWorks, and others. - Hands-on experimental and design background coupled with solid engineering skills. - Prior experience in the semiconductor industry is highly preferred. - Excellent problem-solving skills and attention to detail. - Strong communication and teamwork abilities. Join Aether Semiconductors on an exciting journey of progress and possibilities! Apply Now.,

In this role at Client, as a Site Reliability Engineer (SRE) for Platform Reliability & Operational Excellence, you will be responsible for ensuring the availability, performance, scalability, and production readiness of services. Your role will involve driving automation, reducing toil, and enabling fast, safe delivery. You will play a key part in shaping a modern reliability culture while safeguarding a platform that directly contributes to road safety through real-time data, analytics, and AI. Key Responsibilities: - Define, implement, and iterate SLIs/SLOs (latency, availability, errors, saturation); operationalize error budgets and trigger corrective action. - Engineer end-to-end observability (metrics, logs, traces, events) leveraging Datadog for accelerated detection and root cause analysis. - Automate infrastructure using Terraform, deployment workflows, self-healing mechanisms, and progressive delivery (canary / blue-green). - Lead incident lifecycle including detection, triage, mitigation, coordination, communication, and high-quality post-incident reviews for systemic fixes. - Build and optimize CI/CD pipelines (GitHub Actions or equivalent) with reliability, rollback safety, and change quality controls. - Perform capacity & performance engineering activities such as load modeling, autoscaling policies, and cost / efficiency tuning. - Reduce toil through tooling, runbooks, proactive failure analysis, and chaos / fault injection (AWS FIS or similar). - Partner with development teams on architectural reviews, production readiness, resilience, security, and observability. - Enforce least-privilege, secrets management, and infrastructure security practices; integrate policy as code. - Improve alert quality for noise reduction, actionable context, and to lower MTTR and fatigue. - Champion reliability patterns such as backpressure, graceful degradation, and circuit breaking. - Support distributed systems debugging with emphasis on AI for troubleshooting timeouts, partial failures, and consistency anomalies. - Contribute to governance of change management, deployment health gates, and release safety. - Document playbooks, escalation paths, and evolving reliability standards. - Treat reliability as a product by defining a roadmap, KPIs, stakeholder alignment, and continuous improvement. Preferred Qualifications: - 3+ years of experience in SRE / Production Engineering / DevOps roles. - Proficiency in one or more programming languages like Go, Python, TypeScript/Node.js, or Ruby for automation, tooling, and services. - Strong knowledge of Linux internals and networking fundamentals including DNS, TLS, HTTP, routing, and load balancing. - Hands-on experience with Infrastructure as Code using Terraform and GitOps workflows. - Familiarity with containers & orchestration (AWS ECS), production-grade observability tools like Prometheus, Grafana, OpenTelemetry, ELK, and Datadog. - Experience in CI/CD design, incident management practices, distributed systems failure modes, chaos / fault injection frameworks, performance testing, and profiling. - BS/MS in Computer Science, Engineering, or equivalent practical expertise. In this role at Client, you will have the opportunity to shape the quality & reliability strategy for a modern, mission-driven safety platform. You will directly impact communities by improving public safety outcomes and work on cutting-edge solutions that shape the world today. Joining Client means you'll be part of a culture focused on learning loops, autonomy, and meaningful impact. About GlobalLogic: GlobalLogic, a Hitachi Group Company, is a trusted digital engineering partner to the world's largest and most forward-thinking companies. Since 2000, GlobalLogic has been at the forefront of the digital revolution, collaborating with clients to transform businesses and redefine industries through intelligent products, platforms, and services. In this role at Client, as a Site Reliability Engineer (SRE) for Platform Reliability & Operational Excellence, you will be responsible for ensuring the availability, performance, scalability, and production readiness of services. Your role will involve driving automation, reducing toil, and enabling fast, safe delivery. You will play a key part in shaping a modern reliability culture while safeguarding a platform that directly contributes to road safety through real-time data, analytics, and AI. Key Responsibilities: - Define, implement, and iterate SLIs/SLOs (latency, availability, errors, saturation); operationalize error budgets and trigger corrective action. - Engineer end-to-end observability (metrics, logs, traces, events) leveraging Datadog for accelerated detection and root cause analysis. - Automate infrastructure using Terraform, deployment workflows, self-healing mechanisms, and progressive delivery (canary / blue-green). - Lead incident lifecycle including detection, triage, mitigation, coordination, communication, and high-quality post-inc

Role Overview: As the Manager - Structures & DfAM, you will lead, mentor, and contribute a dedicated group of mechanical and aerospace engineers to deliver innovative and high-quality projects on time, within budget, and with optimal resource allocation. You will drive design excellence, integrate engineering best practices, and ensure rigorous adherence to mechanical engineering principles across all projects while collaborating closely with both internal and external stakeholders. This role is pivotal in driving innovation and continuously improving design and development processes in line with strategic organizational goals. Key Responsibilities & Accountabilities: - Team Leadership - Contribute to, supervise, motivate, and develop a team of mechanical and aerospace engineers. - Foster a collaborative environment, ensuring that all team members work cohesively towards project objectives. - Project Management - Oversee the entire project lifecycle from conceptual design through implementation ensuring adherence to timelines, budgets, and resource plans. - Implement robust project management methodologies to track progress, manage risks, and resolve issues promptly. - Conduct periodic progress reviews and adjust resource allocation as necessary to mitigate risks and overcome challenges. - Technical Oversight - Direct the design, simulation, prototyping, and testing of mechanical systems and structures, ensuring compliance with industry standards. - Ensure that engineering practices such as DFMA (Design for Manufacture and Assembly), Design for Additive Manufacturing (DfAM), Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), Optimization methodologies, and quality control processes are rigorously applied. - Drive design trade-offs and decision-making processes to balance performance, cost, and reliability. - Quality Assurance & Risk Management - Ensure all projects exceed customer expectations through rigorous adherence to quality standards. - Establish robust risk assessment and mitigation protocols to address challenges proactively throughout project lifecycles. - Stakeholder Engagement - Collaborate with internal cross-functional teams (e.g., electrical, software, production, quality assurance) to ensure integrated project execution. - Engage with external stakeholders including clients, suppliers, and regulatory bodies to align project requirements and secure necessary resources and approvals. - Represent the team in technical forums and strategic meetings to communicate project progress and innovation initiatives. - Innovation & Continuous Improvement - Champion innovative solutions and emerging technologies that enhance system performance and competitive advantage. - Lead initiatives to refine development processes, ensuring continuous improvement in project execution and quality outcomes. Qualification Required: - Strong foundation in core mechanical principles such as statics, dynamics, fluids, thermodynamics, and material science. - Experience in the conceptualization, design, optimization, testing, and flight qualification of aerospace structures, both metallic and composites. - Experience in undertaking the design, simulation, and validation of thermal systems for aerospace applications. - Familiarity with Additive Manufacturing technologies, such as Laser Powder Bed Fusion (LPBF) and hands-on experience in undertaking Topology Optimization and Design for Additive Manufacturing (DfAM). - Hands-on experience with Design, Engineering, and Simulation tools (e.g., SolidWorks, UG NX, CATIA, ANSYS, Altair HyperWorks, Simufact). - Intimate knowledge of the global best practices and standards for the design and flight certification of Aerospace Structures and Components, such as for Launch Vehicles, Satellites, or Spacecrafts.,

Role Overview: As a Technician at HARMAN Automotive, you will be responsible for tracking defective units" receipt at the plant, conducting root cause analysis with cross-functional teams, preparing analysis reports, and assisting in documentation related work for part receipt, inspection, and dispatch of refurbished parts. Your role will involve coordinating with various teams, performing failure analysis, using diagnostic tools, documenting findings, collaborating with different departments, maintaining equipment, and conducting testing for new products. Key Responsibilities: - Coordinate with various cross-functional teams for analysis and confirmation of root cause. - Perform failure analysis on returned infotainment units using diagnostic tools. - Conduct visual inspections, X-ray, microscopy, and thermal imaging to detect defects. - Document findings in failure analysis reports and support problem-solving teams. - Collaborate with design, manufacturing, and supplier quality teams to identify root causes and recommend corrective actions. - Collect SW logs, interact with SW team, and connect with Customer Quality team for issue closure and analysis. - Maintain Tracker and update analysis progress daily. - Develop testing mechanism & setup for new products, conduct vehicle level testing, and collect logs. - Conduct DOE and reliability testing, maintain failure analysis lab equipment, assist in rework, and track failure modes. Qualifications Required: - Diploma or bachelor's degree in Electronics or Electrical Engineering. - 2+ years of experience in failure analysis, electronics testing, or repair, preferably in automotive infotainment or consumer electronics. - Hands-on experience with electronic debugging tools and test benches. - Familiarity with automotive communication protocols is a plus. - Basic understanding of SMT components, PCB layout, and circuit schematics. - Strong documentation and communication skills. Additional Details: At HARMAN Automotive, you will benefit from a flexible work environment, employee discounts on Harman and Samsung products, extensive training opportunities through HARMAN University, competitive wellness benefits, tuition reimbursement, employee recognition and rewards program, and an inclusive work environment that encourages professional and personal development.,

As a DEMQRA WLR Principal Engineer at Micron Technology, Inc., you will be responsible for process reliability testing & analysis to support New Product Qualification, Periodic Reliability Monitoring, HVM Fab Process Conversion & Excursion mitigation. In this role, you will create reliability models to correlate test structure data to product reliability, develop test methodologies to industry standards, and mitigate process reliability risks for advanced CMOS & Interconnect scaling. You will collaborate with engineering teams from Technology Development, Global Quality, Design Engineering, Product Engineering, and HVM Manufacturing Fabs to achieve Best-In-Class Quality. Responsibilities include, but not limited to: - Wafer Level & Package Level Reliability testing & analysis for CMOS & Interconnects. - Comprehend failure modes and failure rate within the scope of the product qualification. - Perform risk assessment at all decision points within the qualification cycle. - Provide WLR support for HVM Fab Process conversion & Excursion material disposition. - Collaborate with Technology Development for new technology node deployment. - Develop process reliability tests to assess new process failure mechanisms. - Ensure that test methodology follows industry standards, such as the Joint Electron Devices Engineering Council (JEDEC). Strong Candidates have these Qualifications: - Experience in handling Package Level / Wafer Level Reliability Systems or Parametric analyzers or Semiconductor characterization. - Strong background in Intrinsic Semiconductor Reliability Failure Mechanisms and product fail modes. - Familiarity with statistical concepts relevant to semiconductor reliability. - Good understanding of CMOS Device Engineering, process integration, and Statistical Quality Control. - Excellent data analysis and problem-solving skills. Minimum Qualifications: - Bachelors with 10+ years experience or Masters with 7+ experience or PhD with 5+ years experience - Area of Specialization: Electrical Engineering / Microelectronics / Nanotechnology / Material Science Engineering/Reliability Engineering. About Micron Technology, Inc.: We are an industry leader in innovative memory and storage solutions transforming how the world uses information to enrich life for all. With a relentless focus on our customers, technology leadership, and manufacturing and operational excellence, Micron delivers a rich portfolio of high-performance DRAM, NAND, and NOR memory and storage products through our Micron and Crucial brands. Every day, the innovations that our people create fuel the data economy, enabling advances in artificial intelligence and 5G applications that unleash opportunities from the data center to the intelligent edge and across the client and mobile user experience. To learn more, please visit micron.com/careers To request assistance with the application process and/or for reasonable accommodations, please contact hrsupport_india@micron.com Micron Prohibits the use of child labor and complies with all applicable laws, rules, regulations, and other international and industry labor standards. AI alert: Candidates are encouraged to use AI tools to enhance their resume and/or application materials. However, all information provided must be accurate and reflect the candidate's true skills and experiences. Misuse of AI to fabricate or misrepresent qualifications will result in immediate disqualification. Fraud alert: Micron advises job seekers to be cautious of unsolicited job offers and to verify the authenticity of any communication claiming to be from Micron by checking the official Micron careers website in the About Micron Technology, Inc.,

As a Sr. Officer/Engineer in Corporate ME and Projects at KOEL, you will be responsible for the full lifecycle delivery of advanced assembly and manufacturing systems. Your key responsibilities will include: - Coordinate the design, manufacturing, procurement, and installation of specialized assembly equipment like conveyors, sub-assembly stations, assembly tools, tightening equipment, FIFO racks, and leak testing machines. - Lead the development and successful commissioning of custom machinery such as engine leak test machines, cylinder head sub-assembly machines, and Poka-Yoke (mistake-proofing) systems. - Manage all financial and timeline aspects, including scheduling, budgeting, and capitalization for major projects. - Drive Integrated Product & Process Development (IPPD), ensure adherence to Design for Manufacturing (DFM) principles, and create key documentation (SOPs and Process Flow Diagrams). Your essential skills and competencies should include: - High proficiency in PLC (Programmable Logic Controller), HMI (Human-Machine Interface), and ECU (Engine Control Unit) systems. - Strong knowledge of how to integrate diverse machines and controls into a seamless assembly line. - Expertise in Design & Process FMEA (Failure Mode and Effects Analysis). - Ability to read and interpret complex technical drawings and schematics. - Demonstrated experience in managing project finances, schedules, and capitalization. This role requires 5 to 10 years of experience in project management within the manufacturing industry.,

Role Overview: Adani Power Limited (APL) is seeking a Maintenance Manager to ensure high equipment availability and reliability in the coal handling plants. Your role will involve tracking and reducing failure rates, performing calibration and vibration analysis, maintaining the Auto Coal Sampler Unit, managing spare parts inventory, budget planning, and implementing digitization and automation strategies. Key Responsibilities: - Lead the maintenance of Coal Handling Plants to maintain high equipment availability. - Track and reduce Mean Time Between Failure (MTBF), Mean Time to Repair (MTR), and increase overall equipment effectiveness (OEE). - Perform calibration and vibration analysis activities for equipment reliability. - Operate and maintain the Auto Coal Sampler Unit (ACSU) for accurate sampling. - Generate work orders for painting, structural strengthening, and corrosion mitigation. - Provide details for Root Cause Analysis (RCA) and Failure Mode and Effects Analysis (FMEA) risk analysis. - Manage spare parts inventory focusing on critical equipment and reduce Non-Moving Inventory (NMI). - Support budget planning for cost-effective operations. - Implement IMS, AWMS, DISHA, CHETNA, Six Sigma, ABEM, and LAKSHYA guidelines. - Ensure compliance with preventive maintenance, safety standards, and environmental regulations. - Execute digitization and automation strategies for operational efficiency. Qualifications Required: - BE/B.tech in Mechanical or Electrical Engineering. - 4+ years of experience in maintenance management within heavy industries, preferably coal handling or power plants. - Experience in the power generation, mining, or heavy industrial sector with a focus on coal handling systems is preferred.,

As a Quality Control candidate at United, your main responsibilities will include: - Inspecting and testing incoming raw materials such as Polyester fibers, recycled fiber, Bico fiber, packaging materials, MDF, laminates, Aluminum extruded sections, etc. - Establishing and improving process and final product quality checking systems for Non-woven wadding products using PET fiber and customizations processes - Conducting online and offline inspections in-house and from other laboratories, from polyester fiber to packaging materials - Maintaining all quality records, documents, and samples for PET wadding and panels - Collecting product and process-related data, conducting analysis, and preparing MIS reports for management - Handling customer complaints effectively You should have in-depth knowledge of Non-woven fabric, PET fibers, and related products, as well as exposure to Polyester fiber board printing and Digital CNC cutting. Additionally, hands-on experience in Continuous Improvement Environment (TPM/WCM/Six Sigma) is required. Key skills and qualifications for this role include: - Knowledge of quality management and product-specific standards applicable to the PET Non-Woven/Wadding industry - Independent, assertive, and positive mindset - Multi-tasking and problem-solving abilities - Familiarity with Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), and Failure Mode and Effect Analysis (FMEA) - Excellent organizational, planning, and administrative skills You should be willing to work at the local factory near Umbergaon, Vapi, Silvass, or Daman, as the company is located 6 kilometers away from Sarigam GIDC. The benefits offered for this full-time, permanent position include cell phone reimbursement, provided meals, health insurance, internet reimbursement, leave encashment, paid sick time, and Provident Fund. The work schedule is during the day shift, with a performance bonus available based on your contributions. Preferred experience includes a minimum of 6 years in Quality Assurance and a total work experience of 9 years. Join United and contribute to maintaining quality control standards in the Non-Woven Textile Industry. As a Quality Control candidate at United, your main responsibilities will include: - Inspecting and testing incoming raw materials such as Polyester fibers, recycled fiber, Bico fiber, packaging materials, MDF, laminates, Aluminum extruded sections, etc. - Establishing and improving process and final product quality checking systems for Non-woven wadding products using PET fiber and customizations processes - Conducting online and offline inspections in-house and from other laboratories, from polyester fiber to packaging materials - Maintaining all quality records, documents, and samples for PET wadding and panels - Collecting product and process-related data, conducting analysis, and preparing MIS reports for management - Handling customer complaints effectively You should have in-depth knowledge of Non-woven fabric, PET fibers, and related products, as well as exposure to Polyester fiber board printing and Digital CNC cutting. Additionally, hands-on experience in Continuous Improvement Environment (TPM/WCM/Six Sigma) is required. Key skills and qualifications for this role include: - Knowledge of quality management and product-specific standards applicable to the PET Non-Woven/Wadding industry - Independent, assertive, and positive mindset - Multi-tasking and problem-solving abilities - Familiarity with Advanced Product Quality Planning (APQP), Production Part Approval Process (PPAP), and Failure Mode and Effect Analysis (FMEA) - Excellent organizational, planning, and administrative skills You should be willing to work at the local factory near Umbergaon, Vapi, Silvass, or Daman, as the company is located 6 kilometers away from Sarigam GIDC. The benefits offered for this full-time, permanent position include cell phone reimbursement, provided meals, health insurance, internet reimbursement, leave encashment, paid sick time, and Provident Fund. The work schedule is during the day shift, with a performance bonus available based on your contributions. Preferred experience includes a minimum of 6 years in Quality Assurance and a total work experience of 9 years. Join United and contribute to maintaining quality control standards in the Non-Woven Textile Industry.

As a Field Instrumentation Lead focusing on Boiler systems at Adani Power Limited (APL), your role is crucial in maintaining and enhancing the operational excellence and reliability of all Control & Instrumentation systems associated with Boiler systems. Your responsibilities include: - Monitoring the availability and functionality of all C&I systems related to the Boiler area such as firing systems, Mill fan, ASLD, CAMS, and MOV. - Conducting routine maintenance of MOV, Boiler, and Auxiliaries to prevent equipment failures. - Executing timely overhauls of the Boiler systems to maintain operational integrity. - Troubleshooting and rectifying breakdowns of equipment to ensure continuous operation. - Coordinating with other departments to minimize maintenance delays and optimize equipment availability. - Executing calibrations as per schedule and preparing detailed reports on findings and adjustments. - Providing on-field support for Root Cause Analysis (RCA), Failure Mode and Effects Analysis (FMEA), and Zero Forced Outage (ZFO) to enhance system reliability. - Implementing MoC (Management of Change) protocols to ensure safe and compliant modifications to equipment and processes. Moreover, you will be responsible for: - Performing periodic backups of Boiler PLC and auxiliary systems to secure operational data. - Providing resources and guidance to contractor technicians for routine maintenance tasks. - Maintaining the FGD (Flue Gas Discharge) systems to ensure environmental compliance. - Managing procurement processes for equipment and services, ensuring value for money and adherence to financial guidelines. - Managing documentation and as-built drawings for the section. In addition, you will contribute to: - Implementing and following IMS, AWMS, DISHA, CHETNA guidelines within the department. - Maintaining a culture of safety by providing proper training and ensuring adherence to safety protocols to prevent accidents. - Implementing field-related ZFO Action Items and AWMS initiatives. - Adhering to BPT processes, technical audits, and compliance requirements. - Reporting unsafe conditions, acts, and near misses in the work area to prevent incidents. - Following the guidelines of the work permit system to ensure safe working conditions. - Ensuring adherence to statutory compliances and regulations. Furthermore, you will focus on: - Executing comprehensive digitization strategies to optimize operational efficiency. - Implementing automation solutions to support overall organizational goals/strategy. - Implementing process and system improvements by adopting newer technologies and innovative ideas. Key Stakeholders - Internal: - Environment & Sustainability - Techno Commercial - Operations & Maintenance - Security - Stores - Support Functions - ENDORSE - ENOC Key Stakeholders - External: - Vendor Qualifications: - Educational Qualification: Bachelor's degree in C&I or Electronics & Communication or equivalent degree. - Work Experience: 4+ years of experience in C&I systems, preferably in power plant boiler operations. - Preferred Industry: Experience in power generation, or related process industries with a focus on control and instrumentation systems.,

As a Product Development Engineer at our company, you will play a crucial role in the new product design and development process from the initial stage to production. Your responsibilities will include: - Benchmarking the product to ensure competitiveness in the market. - Testing and recording performance of components, products, and manufacturing methods. - Analyzing and resolving technical issues associated with components, products, manufacturing methods, and performance. - Preparing bill of materials (BOM), design specifications, and raw materials specifications. - Conducting failure mode and risk analysis according to ISO 13485 standards. - Verifying and validating product designs and maintaining records. - Ensuring that manufacturing performance and quality goals are met. - Reviewing and maintaining documentation history files (DHF). - Improving existing product manufacturing processes and anticipating the need for new products and fixtures. - Involvement in assembly, troubleshooting, testing, and repair activities of our products. - Providing instruction and support to Manufacturing and QA teams on manufacturing techniques, procedures, and QC inspections. - Identifying replacement components for obsolescence or cost reduction and coordinating with vendors. - Assuring timely manufacturing, packaging, and delivery of new products. - Sourcing and implementing improvements in manufacturing procedures. - Coordinating relationships with vendors and contractors. - Driving on-going process improvement projects to increase yields, reduce cycle time, lower costs, and enhance product quality and reliability. Qualifications required for this role include: - Bachelor of Engineering or Equivalent degree. - Minimum 5 years of experience in the medical device industry. - Strong knowledge of medical device product design and development processes. - Familiarity with injection multi-cavity injection mould, die, fixture, and machine design. - Understanding of design and drawing change control procedures. - Ability to assess the feasibility of design modifications and troubleshoot to improve product reliability. - Experience in interfacing with cross-functional teams. - Good communication skills, both verbal and written. - Knowledge of ISO 13485 / MDR 2017 standards. - Strong interpersonal and collaborative skills, working effectively as a team member. - Desirable proficiency in CAD software, specifically Solid Works. Should you have any further questions or wish to apply for this position, please reach out to Mr. Amit Kumar via phone at +91 9560043049 or email at hr@maisindia.com. As a Product Development Engineer at our company, you will play a crucial role in the new product design and development process from the initial stage to production. Your responsibilities will include: - Benchmarking the product to ensure competitiveness in the market. - Testing and recording performance of components, products, and manufacturing methods. - Analyzing and resolving technical issues associated with components, products, manufacturing methods, and performance. - Preparing bill of materials (BOM), design specifications, and raw materials specifications. - Conducting failure mode and risk analysis according to ISO 13485 standards. - Verifying and validating product designs and maintaining records. - Ensuring that manufacturing performance and quality goals are met. - Reviewing and maintaining documentation history files (DHF). - Improving existing product manufacturing processes and anticipating the need for new products and fixtures. - Involvement in assembly, troubleshooting, testing, and repair activities of our products. - Providing instruction and support to Manufacturing and QA teams on manufacturing techniques, procedures, and QC inspections. - Identifying replacement components for obsolescence or cost reduction and coordinating with vendors. - Assuring timely manufacturing, packaging, and delivery of new products. - Sourcing and implementing improvements in manufacturing procedures. - Coordinating relationships with vendors and contractors. - Driving on-going process improvement projects to increase yields, reduce cycle time, lower costs, and enhance product quality and reliability. Qualifications required for this role include: - Bachelor of Engineering or Equivalent degree. - Minimum 5 years of experience in the medical device industry. - Strong knowledge of medical device product design and development processes. - Familiarity with injection multi-cavity injection mould, die, fixture, and machine design. - Understanding of design and drawing change control procedures. - Ability to assess the feasibility of design modifications and troubleshoot to improve product reliability. - Experience in interfacing with cross-functional teams. - Good communication skills, both verbal and written. - Knowledge of ISO 13485 / MDR 2017 standards. - Strong interpersonal and collaborative skills, working effectively as a team membe