14 Pressure Sensors Jobs nearby Ratnagiri

As an Instrumentation Technician at M/s. Megha Electromech, your role will involve the installation, calibration, maintenance, and troubleshooting of instrumentation and control systems used in industrial and commercial electrical applications. Key Responsibilities: - Install and commission instrumentation and control systems for electrical infrastructure - Calibrate sensors, transmitters, and measurement devices (pressure, flow, level, temperature, etc.) - Conduct preventive and corrective maintenance on instruments and electrical control systems - Interpret wiring diagrams, P&IDs, and schematics - Ensure compliance with industry standards and safety regulations - Collaborate with electrical engineers and project managers on system integration Qualifications Required: - Diploma or Degree in Instrumentation, Electrical Engineering, or a related field - 2+ years of experience in industrial instrumentation or electrical services - Familiarity with PLCs, SCADA, DCS, and field instrumentation - Strong problem-solving and analytical skills - Knowledge of safety procedures and standards (e.g., NEC, IEC, OSHA) - Excellent communication and teamwork skills Please note: The company offers cell phone reimbursement as a benefit. The job type is permanent, with a day shift schedule and requires in-person work at Nagapur MIDC, Ahilyanagar.,

Role Overview: If you are seeking an opportunity to enhance your experience and contribute to the development of new technologies, Emerson is offering an exciting position for you as an Engineer Test Automation. As a Test Automation Engineer, you will be responsible for validating product performance, functionality, and reliability. You will report to the Technical Lead of NPD. Key Responsibilities: - Design, develop, and maintain automated test systems using LabVIEW to validate product performance, functionality, and reliability. - Create modular, scalable, and reusable LabVIEW code for various test setups and instruments such as DAQs, sensors, and actuators. - Execute automated test sequences and ensure accurate data acquisition from test equipment. - Interface with hardware components like pressure sensors, flow meters, and control valves as part of the test setup. - Analyze existing test procedures to identify opportunities for automation and efficiency enhancements. - Implement improvements to reduce test cycle time, enhance repeatability, and minimize errors. - Summarize test results, generate automated reports, and highlight key observations and anomalies. - Utilize statistical tools and data visualization techniques to interpret test data and support engineering decisions. - Maintain detailed documentation of test scripts, setups, and procedures. - Ensure that test systems comply with internal quality standards and industry regulations. - Collaborate closely with design, validation, and quality teams to define test requirements and acceptance criteria. - Support root cause analysis and implement corrective actions based on test findings. - Stay updated on the latest LabVIEW features, NI hardware, and test automation best practices. - Contribute to the development of a robust and scalable test automation framework. Qualifications Required: - Engineering Degree in Mechanical or Mechatronics Engineering. - Minimum 3+ years of experience in the field of test automation and validation. - Proficiency in LabVIEW tool and ability to write programs required for Test Automations. - Skilled in building required Test stands for performing test automations and validations. - Capable of completing documentation and BOMs of necessary test stand components. - Experience in upgrading Test stands using the latest components. - Strong understanding of automated test frameworks. Additional Company Details: Emerson emphasizes a workplace where every employee is valued, respected, and empowered to grow. The company fosters an environment that promotes innovation, collaboration, and diverse perspectives to generate great ideas from great teams. Continuous career development and an inclusive culture are prioritized to support employee success through mentorship, training, and leadership opportunities. Employee wellbeing is also important, with competitive benefits plans, medical insurance options, flexible time off plans, and more. Emerson aspires to create a collaborative environment that drives innovation for a healthier, safer, and more sustainable world. The company is dedicated to its people, communities, and the planet, striving to make a positive impact through its endeavors. Joining Emerson means being part of a community focused on solving complex problems and contributing to a better world through continuous skill development and engagement. No calls or agencies please.,

As a highly skilled engineer for the Digital Operations Center (DOC) team at CrowdStrike, you will be responsible for managing end-to-end incident lifecycles in a 24/7/365 environment. Your critical role will involve proactive monitoring, incident detection, team coordination, communication, documentation, shift management, and continuous improvement to ensure the stability, performance, and reliability of the IT network and product services. - Proactive Monitoring: Utilize internal dashboards to monitor support ticket volumes, IT infrastructure performance, and product/sensor health metrics to identify potential issues before they impact operations. - Incident Detection and Escalation: Swiftly identify anomalies or incidents, determine the severity, and escalate complex issues to Sr. DOC Analysts for resolution. - Team Coordination: Serve as the central point of contact for technology incidents, escalate issues to relevant teams, and ensure timely resolution. - Communication: Maintain clear communication with internal stakeholders, provide updates on ongoing incidents, and collaborate with Incident Commander for executive-level communication. - Documentation and Reporting: Keep detailed records of incidents, actions taken, and resolutions, contribute to post-incident reviews, and provide insights for continuous improvement. - Shift Management: Work in rotational shifts to provide 24/7 coverage, ensuring smooth handovers between shifts. - Continuous Improvement: Actively participate in refining monitoring tools, processes, and protocols to enhance the effectiveness of the Digital Operations Center. - Bachelors degree in Engineering, Computer Science, Information Technology, or a related field - Minimum 6 years of experience in Digital Operations Center (DOC) or similar environment like NOC or IT Operations - Experience with monitoring tools, network protocols, systems, and infrastructure - Strong problem-solving, analytical, communication, and interpersonal skills - Ability to work under pressure, manage multiple priorities, and proficiency in scripting languages like Python and Bash - Familiarity with ITIL practices, incident command system (ICS) principles, and industry certifications such as CCNA, CCNP - Willingness to work in a high-stress, fast-paced environment and in rotational shifts,

You will be working as a Junior Instrumentation Engineer at Manastu Space, a Space Safety and Logistics Company dedicated to using technology to address the issue of Debris Pollution in Space. By developing an Agile, Safe, Efficient and Affordable Green Propulsion System with a new fuel, engine, and catalyst, you will be contributing to the mission of preventing satellite collisions and reducing Debris Pollution. **Responsibilities:** - Identify and select appropriate sensors for aerospace applications, ensuring proper calibration and performance validation. - Implement efficient methods for interfacing sensors with the system, including noise reduction processing techniques. - Develop calibration procedures, conduct calibration of sensors and measurement instruments, and verify the performance of the instrumentation system. - Set up data acquisition systems to collect sensor data during operational conditions and analyze the acquired data for meaningful insights. - Resolve technical issues related to sensors, instrumentation systems, and data acquisition, ensuring optimal performance through periodic maintenance. - Ensure compliance with industry standards, regulations, and safety protocols relevant to aerospace instrumentation, maintaining high reliability and safety standards. - Generate technical documentation, including specifications, test plans, calibration reports, and user manuals. Provide reports on the instrumentation system's performance and functionality. - Prepare and review PLC Architecture, I/O mapping, PLC panel wiring & GA drawings, and HMI & SCADA graphics. **Qualifications and Experience:** - Bachelor's Degree in Instrumentation/ Instrumentation and Control/ Electronics and Instrumentation Engineering or equivalent with experience in sensors and their interfacing. - Minimum of 1 year of relevant experience in instrumentation engineering, preferably in the aerospace industry, with expertise in sensor selection, integration, and calibration. - Proficiency in sensor interfacing techniques, including analog and digital signal noise reduction processes, data acquisition, and analysis. - Familiarity with various types of sensors used in aerospace applications such as pressure sensors, temperature sensors, accelerometers, and gyroscopes. - Knowledge of industry standards and regulations for aerospace instrumentation, emphasizing reliability and safety. - Experience with data acquisition systems, real-time monitoring tools, Automation skills, PLC, and control systems. - Strong analytical and problem-solving skills to troubleshoot instrumentation and sensor integration issues in a fast-paced aerospace environment. - Excellent communication skills in English & Hindi to collaborate effectively with cross-functional teams, articulate technical concepts clearly, and provide guidance to team members.,

As a Staff Technician: Electrical & Instrumentation at Bloom Energy Ind. Pvt. Ltd., you will play a crucial role in setting up the electrical and instrumentation requirements for catalyst test stands. Your responsibilities will include test stand commissioning, setting up communication with data acquisition units, executing test scripts, processing test data, and generating reports. Your hands-on experience with electrical and instrumentation systems will be key to your success in this role. Location: - This position will be based in Juinagar, Navi Mumbai. Role and Responsibilities: - Install, maintain, and repair electrical wiring, equipment, and fixtures for lab testers. - Calibrate and maintain instrumentation such as electrical furnaces, pressure transmitters, flow meters, temperature sensors, MFCs, and control valves. - Perform preventive and predictive maintenance on electrical and instrumentation systems for catalyst test stands. - Calibrate instruments to ensure accuracy and compliance with standards. - Handle the analytical instrument used in the lab. - Execute different catalyst tests as per defined protocols and standards. - Process and analyze test data to generate comprehensive technical reports. - Responsible for setting up, maintaining, and testing data acquisition systems and associated instruments. - Collaborate with cross-functional teams to ensure smooth test execution and documentation. - Maintain high standards of safety, accuracy, and compliance throughout the testing process. - Coordinate with vendors on delivering/receiving parts & fixtures and informing the engineer of the same. - Coordinate the electrical and instrumentation inventory items. Skills Required: - 4-6 years of relevant experience in the field of electrical and instrumentation. - Experience in industrial or lab-based testing environments. - Familiarity with test automation tools and software. - Ability to adapt to dynamic testing requirements and timelines. - Proficiency in handling data acquisition systems and instrumentation. - Strong attention to detail and analytical thinking. - Proven ability to work effectively in a team and coordinate across departments. - Good attendance, initiative, responsible follow-through, and a willingness to help. - Basic understanding of work safety is an essential skill. - Basic knowledge of MS Office and Outlook. Education: - ITI/Diploma in Electrical, E&I, Instrumentation Engineering.,

As an experienced HVAC Technician, your role will involve handling the installation, maintenance, and troubleshooting of cold storage, chiller systems, and cassette-type air conditioning units in both industrial and commercial settings. Key Responsibilities: - Install, maintain, and repair HVAC systems such as chillers, cassette AC units, AHUs, and cold storage systems (Ammonia/Freon-based). - Perform preventive and corrective maintenance on compressors, condensers, evaporators, and control panels. - Monitor and regulate temperature and humidity levels within cold storage chambers. - Diagnose system malfunctions, replace faulty components, and ensure optimal performance. - Maintain detailed service and maintenance logs for all HVAC and refrigeration equipment. - Conduct leak tests, refrigerant recovery, and pressure testing according to standards. - Collaborate with the maintenance and operations team to minimize equipment downtime. - Ensure compliance with safety, hygiene, and energy efficiency standards. Required Skills & Competencies: - Strong knowledge of chiller systems, cassette units, AHUs, and cold storage refrigeration. - Understanding of refrigeration cycles, controls, and electrical circuits. - Ability to interpret technical manuals, blueprints, and wiring diagrams. - Familiarity with PLC-based systems and temperature sensors is preferred. - Strong troubleshooting, analytical, and team coordination skills. In addition to the above responsibilities and qualifications, the job offers Provident Fund benefits. The work location for this full-time, permanent position is in person.,

As an Instrumentation and Control Systems Engineer, your role will involve designing, installing, and commissioning instrumentation and control systems for dairy processing equipment. You will be responsible for calibrating sensors, flow meters, temperature probes, pressure gauges, and other measurement devices. Additionally, you will develop and implement control strategies for automated dairy processing operations. Key Responsibilities: - Perform routine inspections and preventive maintenance of instruments to ensure minimal downtime. - Diagnose and repair faults in control systems, PLCs, SCADA, and other automation equipment. - Ensure accurate measurement of parameters like temperature, pressure, flow, pH, and conductivity. - Maintain documentation of instrument calibration, maintenance schedules, and compliance reports. - Train plant operators and maintenance staff on the proper use and handling of instrumentation. - Support risk assessments related to process control and automation systems. Qualifications Required: - Bachelor's or Diploma in Instrumentation Engineering, Electronics & Instrumentation, or a related field. - 3-7 years of experience in instrumentation and control systems, preferably in dairy or food processing. This role offers an exciting opportunity to work in a dynamic environment where you will play a crucial role in ensuring the efficient and effective operation of dairy processing equipment.,

You will be responsible for defining system-level sensor architecture for both Automotive and Non-Automotive segments. This includes conducting feasibility analysis of sensor interface and sensor design based on customer requirements. You will also be tasked with capturing system-level requirements from customers and implementing them effectively. Additionally, your role will involve designing, developing hardware and software interfaces to integrate the system, as well as troubleshooting system components for testing purposes. Analyzing test data, identifying issues, and recommending solutions for test failures will be part of your responsibilities. Moreover, you will be expected to write and deliver technical documents and briefings to various audiences. - At least 12 years of experience in sensor development is required for this role. - Deep understanding of sensor technologies and control strategies across various applications, such as temperature, pressure, speed, hall effect, and ultrasonic sensing. - Expertise in interfacing sensors with master control units for different sensor categories is essential. - Ability to evaluate and select optimal sensor elements for diverse applications, working closely with suppliers on solutions involving microcontroller design and sensor algorithms. - Knowledge of circuit design, power electronics design for sensor applications, and an understanding of sensor manufacturing processes for different sensor types are desired qualifications for this position.,

As a Mechatronics Engineer, you should have a Bachelor's degree in Mechatronics Engineering and a minimum of 3-5 years of relevant experience. Your expertise must cover electronic circuits, sensors, motors, actuators (including pressure, flow, servo & stepper motors, valves), and automated control systems. It is essential to be proficient in test equipment procedures, test methodologies, CAD and drafting software (including CAD/CAM), digital control systems, digital signal processing, and embedded systems to excel in this role. Key Responsibilities: - Design and develop mechatronic systems incorporating electronic circuits, sensors, and various types of motors and actuators. - Implement and maintain automated control systems for efficient operation. - Conduct testing procedures using specialized equipment and methodologies. - Utilize CAD and drafting software for design and documentation purposes. - Work with digital control systems, digital signal processing, and embedded systems. Qualifications Required: - Bachelor's degree in Mechatronics Engineering. - 3-5 years of experience in a related field. - Knowledge of electronic circuits, sensors, motors, actuators, and automated control systems. - Proficiency in test equipment procedures, CAD and drafting software, digital control systems, digital signal processing, and embedded systems. If you are passionate about working in a dynamic engineering environment and meet the specified requirements, we encourage you to apply for this position.,

As a Service and Calibration Technician for BMS and HVAC instruments, your role will involve attending service and calibration calls for various instruments such as Pressure transmitters, Flow Meters, Level controllers, VFDs, AHU/FCU systems, and more. You will be responsible for troubleshooting and resolving issues in sensors, performing calibration of temperature, pressure, flow, and humidity instruments. Additionally, you will prepare service reports, calibration certificates, and documentation. You will also provide support for site visits related to AMC, breakdowns, and testing activities. - Diploma or B.E. degree in Electrical, Electronics, or Instrumentation - At least 3 years of experience in BMS/HVAC service and calibration - Knowledge of calibration procedures and BMS communication protocols such as Modbus and BACnet - Strong troubleshooting skills and the ability to handle customers effectively This is a full-time, permanent position with benefits that include cell phone reimbursement, health insurance, leave encashment, and Provident Fund. The work schedule is during the day shift, and a yearly bonus is provided. A willingness to travel is preferred for this role. If you are a dedicated and skilled technician with experience in BMS and HVAC service and calibration, we welcome you to apply for this opportunity.,

As an innovation company passionate about creating a better world through design, Future Factory is seeking individuals with a drive to make a positive impact through their work. If you are full of groundbreaking ideas and eager to contribute to the strategic thinking process while being hands-on in a studio environment, we invite you to join our close-knit team. With a focus on creating new opportunities through innovative thinking, we aim to shape the design of future products on the cusp of change. **Key Responsibilities:** - Understand product requirements and associated standards and regulations. - Collaboratively formulate solutions along with a multidisciplinary team by contributing to the development of Electronics circuits, embedded solutions, and embedded applications development. - Essential customer engagement skills for consulting. **Job Requirements:** - Quick prototyping skills. - Experience and expertise in 8/16 bit microcontrollers. - Hands-on experience in Arduino / Raspberry Pi. - Proficiency in NFC, GSM, GPRS, BLE, and IoT technologies. - Familiarity with smart miniature sensors and actuators. Future Factory values individuals who thrive in challenging environments, can manage pressure effectively, and enjoy exceeding expectations. If you believe in the potential of design and are an advocate for it, Future Factory is where your ideas come to life. Join us on a journey to bring ideas to action, find joy in creation, earn respect, and have a fun time. If you do not meet the above requirements but are still interested, please reach out to us at careers@futurefactory.in. We are always on the lookout for talented individuals and would love to connect with you.,

As a Supplier Industrial Engineer for Low Voltage TLA modules, your role involves managing the industrialization of Mechanical Autopilot Infotainment parts for tier 2 suppliers specializing in Audio, Telemetry, and Sensors. You will be responsible for scaling up manufacturing at suppliers collaborating with Tesla Engineering teams for Automotive, Energy, Robotics, and Data centers. **Key Responsibilities:** - Provide leadership for New Product Introduction (NPI) at Suppliers - Lead supplier improvements in scalability, cost, and quality - Review 2D and 3D CAD Mechanical Drawings and conduct DFM with suppliers - Execute Tier 2 Mechanical Parts for sourcing and qualification activities required for product release PPAP - Accountable for supplier audits to ensure their ability to meet part performance, delivery, and reliability expectations - Collaborate with Tesla Design, Quality, and Manufacturing to determine the ideal performance specifications and supplier metrics - Guide suppliers in developing robust processes and procedures for efficient production of high-quality products - Provide input on new or alternative materials for improved design, manufacturability, or cost reduction - Able to work independently and under high pressure - Average of 50 - 60% travel possibly on short notice **Qualifications Required:** - Bachelors Degree or equivalent experience in Mechanical, Industrial, or Material/Manufacturing Engineering - 1-4 Years Experience in Automotive Top-Level Assembly & mechanical Component Development preferred - Well-versed with new product development, customer launch DFMEA & PFMEA, and DFM - Ability to learn new skills and processes in development simulation methods and tools - In-depth knowledge of Geometric Dimensioning and Tolerancing (GD&T), inspection, and experience in conducting MSA (Measurement System Analysis) - Knowledge of Plastic, Metal, Part Design, Tooling, and Manufacturing processes - Experience in CNC machining, Brazing, Stamping, and high-pressure die casting process - Knowledge of Automation in Manufacturing assembly, EOL testing of Electronic Modules - Proficient with SPC and data analysis, experience in using Statistical Software packages like Minitab or JMP, MS office, especially for Excel and PPT - Soft Skills Required: Highly motivated, proactive engineer, Strong in Analytical Skills, Presentation Skill, Strong communication skills with the international team If there are any additional details about the company in the job description, please provide that information separately.,

Role Overview: In this role, you will be responsible for key account management and taking ownership of individual booking/target. You will work towards achieving budgets for a given year by targeting customers and install base with various solution offerings. Additionally, you will collaborate closely with the region team, channels/distributors, industry verticals, and lifecycle services. Your role will also involve developing new ESPs and OEMs for incremental growth, driving business development and market engagement, and building a funnel around uncovered markets and geographies. Key Responsibilities: - Key account management - Taking ownership of individual booking/target - Achieving budgets for a given year - Targeting customers and install base with various solution offerings - Working closely with the region team, channels/distributors, industry verticals, and lifecycle services - Developing new ESPs and OEMs for incremental growth - Driving business development and market engagement - Building a funnel around uncovered markets and geographies Qualifications Required: - Technically minded with a minimum of six to fifteen years of relevant work experience - Experience in selling pneumatic products and field instruments such as solenoid valves, proximity sensors, and pressure regulators - Knowledge of valve automation - Understanding the offerings of Competition - Industry knowledge for process industries, chemical, power, etc. - Overall Market knowledge, Customers, etc. Additional Company Details: At Emerson, the workplace culture prioritizes valuing every employee, respecting them, and empowering them to grow. The company fosters an environment that encourages innovation, collaboration, and diverse perspectives as it believes that great ideas come from great teams. The commitment to ongoing career development and fostering an inclusive culture ensures that employees have the necessary support to thrive. Emerson invests in employee success through mentorship, training, and leadership opportunities to enable them to make a lasting impact. The company believes that diverse teams working together are key to driving growth and delivering business results. Emerson also recognizes the importance of employee well-being by providing competitive benefits plans, including a variety of medical insurance plans, an Employee Assistance Program, employee resource groups, recognition, and more. The company's culture offers flexible time-off plans, including paid parental leave (maternal and paternal), vacation, and holiday leave.,

As a Senior Staff Engineer in the System Test & Validation team at Bloom Energy, you will play a crucial role in driving the design, development, and execution of advanced test systems and validation strategies for Balance of Plant (BOP) components and subsystems. Your responsibilities will include: - Leading cross-functional initiatives to ensure product reliability, performance, and compliance with system-level requirements in simulated operational environments. - Strategically developing test systems by designing scalable, modular test fixtures and infrastructure for validating BOP/BOS components under simulated environmental conditions. - Providing technical leadership by guiding the team in evaluating theoretical designs, championing innovation in test methodologies, and leading automation efforts. - Defining robust test procedures for qualification, characterization, and reliability testing of mechanical, electromechanical systems, and Industrial Instruments/sensors. - Reviewing critical documentation and ensuring adherence to engineering best practices and internal quality standards. - Offering technical oversight on pipe sizing, flow and pressure drop calculations, stress analysis, and material/component selection for test systems and product subsystems. - Collaborating with design, manufacturing, sourcing, and quality teams to drive design changes, prototyping, localization, and cost optimization initiatives. - Leading risk management activities, root cause analysis for critical failures, and implementing corrective actions and design improvements. - Establishing calibration and preventive maintenance programs for lab instrumentation, ensuring compliance with safety protocols, SOPs, and audit requirements. - Mentoring junior engineers and technicians to foster a culture of technical excellence, continuous learning, and process discipline. Qualifications required for this role include: - Bachelor or master's degree in Mechanical, Chemical, Instrumentation, or Systems Engineering. - 10+ years of experience in test engineering, product validation, or systems integration, preferably in energy, automotive, or industrial domains. - Strong expertise in fluid dynamics, thermodynamics, instrumentation, and control systems. - Experience with various testing methodologies (Functional, Performance, Reliability, regression, etc.). - Proven ability to manage multiple projects simultaneously and deliver detailed testing reports to support critical business decision-making. - Proficiency in tools such as LabVIEW, MATLAB, and data acquisition systems. - Excellent analytical, communication, and team management skills. Join Bloom Energy in Juinagar, Navi Mumbai, and be part of a dynamic and forward-thinking company driving the transformation of energy generation and delivery.,