1 Voltage Regulator Jobs nearby Bangalore

Role Overview: As a Senior Analog and Digital Mask Design Engineer at NVIDIA, you will be part of a dynamic team responsible for handling challenging analog circuit designs. Your primary focus will be executing IC layout of cutting-edge, high-performance CMOS integrated circuits in various foundry process nodes. You will play a key role in driving the identification and resolution of complex physical design issues, mentoring junior engineers, and ensuring design quality by adhering to industry best practices. Key Responsibilities: - Execute IC layout of high-performance CMOS integrated circuits in foundry process nodes ranging from 2nm to 7nm and lower, following industry best practices. - Optimize all physical verification activities, including DRC, LVS, density analysis, and tape-out checks. - Develop analog layouts, lead solving efforts, and drive optimization for performance, area, and manufacturability. - Cultivate effective teamwork across multi-functional teams, influence project direction, and ensure alignment with organizational objectives. - Lead and perform full custom layout of analog/mixed-signal blocks such as op-amps, bandgaps, PLLs, ADCs, DACs, LDOs, Voltage Regulators, etc. - Represent the team in technical discussions with customers, excel in resource management, and mentor junior engineers in established methodologies. Qualifications Required: - 8+ years of experience in high-performance analog layout in advanced CMOS process. - BE/M-Tech in Electrical & Electronics or equivalent experience. - Thorough knowledge of industry-standard EDA tools, specifically for Cadence. - Experience with layout of high-performance analog blocks such as Current mirrors, Sense Amps, bandgaps, etc. - Knowledge of analog design and layout guidelines, high-speed IO, and other analog-specific guidelines. - Experience with floor planning, block-level routing, and macro-level assembly. - Demonstrated experience with analog layout for silicon chips in mass production. - Background with sub-micron design in foundry CMOS nodes 7nm finfet and below is preferred. - Experience working in distributed design teams is a plus.,

**Job Description:** As a PMIC Systems & Validation Engineer at Qualcomm India Private Limited, you will be part of the Power Management Systems, Validation & Integration team (PMIC-SVI) driving the industry in system architecture and post-silicon validation of high-performance Power Management Integrated Circuits (PMICs). Your role involves a mix of Architecture, HW Systems, Functional Validation, Chipset integration, and customer issue debug support. You will collaborate with various engineering teams like Analog/Digital Design, Software, and Customer Engineering to define systems, debug hardware/software, and validate PMIC solutions in a fast-paced environment. **Key Responsibilities:** - Define top-level specifications involving HW/FW/SW level partitioning, HW Register interfaces, memory sizing, protocol selection, multi-PMIC connectivity, and debug framework support to meet chipset level requirements. - Develop and execute comprehensive functional validation plans covering manual and automated test cases, analyze HW-level results through signal measurements, debug issues, and generate reports. - Perform risk assessment of development and validation plans, interact with cross-functional teams, and engage with customers worldwide. - Utilize hands-on lab experience for post-silicon validation, demonstrate good hardware debug skills related to DC-DC converters, and automate test cases for HW systems. - Possess strong programming skills in languages like C#, F#, Python, Perl, or LabVIEW, along with a good understanding of PMIC, Power Electronics, and digital & embedded electronics concepts. - Comfortably use lab instruments like oscilloscopes, power supplies, JTAG debuggers, and have familiarity with HW schematics and ability to trace PCB interconnections. - Demonstrate good analytical and communication skills, proactively seek information, manage priorities, and handle multiple tasks efficiently in a high-paced environment. **Qualification Required:** - Bachelor's degree in Electronics related Engineering is a must; Master's degree with specialization in VLSI/Microelectronics, Power Management is preferred. - 1-3 years of job experience in various HW/S aspects of electronic product development is required. - Knowledge of ASIC Flow, PMIC fundamentals, Power Management, Microcontroller architecture, basic firmware, and HW-SW interaction is preferred. - Strong hands-on lab experience in post-silicon validation, familiarity with tools like JIRA and GIT, and exposure to assembly-language programming are advantageous. Qualcomm is committed to providing an accessible process for individuals with disabilities during the application/hiring process. If you require accommodations, please contact disability-accommodations@qualcomm.com. Remember to abide by all applicable policies and procedures while applying for roles at Qualcomm. Staffing and recruiting agencies are not authorized to submit profiles or applications. If you need more information about this role, reach out to Qualcomm Careers.,

As a highly experienced Power-Management & PLL Circuit Engineer, your role will involve leading the design and development of advanced power-management circuits and PLL IPs for complex SoCs. You will be responsible for the following key tasks: - Lead the design of power-management circuits including LDOs (ultra-low noise, capless, fast-transient), DC-DC converters (PWM/PFM), and voltage regulators. - Design and implement high-performance PLL circuits for frequency synthesis and clock generation. - Perform advanced transistor-level simulations, modeling, and analysis to ensure performance and robustness. - Work closely with layout teams to guide floorplanning, layout practices, and physical design reviews. - Drive lab bring-up, silicon debug, and characterization of PMIC and PLL circuits. - Define specifications and system-level requirements in collaboration with architecture and SoC teams. - Mentor and guide junior engineers in circuit design, simulation, and lab methodologies. Qualifications Required: - Bachelors or Masters degree in Electrical Engineering or related field. - 10+ years of hands-on experience in power-management and PLL circuit design. - Strong foundation in analog/mixed-signal fundamentals and feedback loop stability. - Expertise in designing LDOs, DC-DC converters, voltage regulators, and PLL building blocks. - Proficiency with industry-standard simulation tools (Cadence Virtuoso, Spectre, ADE, etc.). - Strong experience with lab testing, silicon validation, and characterization equipment.,

As a PMIC Systems & Validation Engineer at Qualcomm India Private Limited, you will be part of the Power Management Systems, Validation & Integration team (PMIC-SVI) responsible for the system architecture and post-silicon validation of high-performance Power Management Integrated Circuits (PMICs) embedded in Chipsets for various consumer electronics. Your role will involve a mix of Architecture, HW Systems, Functional Validation, Chipset integration, and customer issue debug support. You will work on state-of-the-art technology to enable products with world-leading brands. Depending on your experience level and technical expertise, you will own and participate in systems definition, HW/SW debugging, and validation of PMIC solutions by collaborating with cross-functional engineering teams in a fast-paced environment. **Key Responsibilities:** - Define Top-Level specifications involving HW/FW/SW level partitioning, HW Register interfaces, protocol selection, multi-PMIC connectivity grid, and debug framework support to meet chipset level requirements. - Develop a comprehensive functional validation plan covering manual and automated test cases, execute tests, analyze results at HW-level through signal measurements, debug issues, and create detailed reports. - Perform risk assessment of development and validation plans, interact with cross-functional teams, and engage with customer support teams globally. **Qualification Required:** - Bachelor's degree in Electronics related Engineering is a must. - Master's degree with specialization in VLSI / Microelectronics, Power Management, etc. is preferred. - 1-3 years of job-experience relevant to various HW/S aspects of electronic product development. - Hands-on lab experience in Post-Si Validation, familiarity with PMIC, Power Management, Microcontroller architecture, and basic-firmware & HW-SW interaction. - Strong programming skills in languages like C#, F#, Python, Perl, LabVIEW, or any other scripting language used in VLSI/Embedded Domain. - Good analytical & communication skills, ability to seek information proactively, and handle multiple tasks efficiently in a fast-paced environment. - Experience in automating test-cases for HW-systems via SW-control, ability to strategize and execute tasks effectively, and prior experience in leading white-box validation efforts are a plus. - Exposure to Assembly-language programming and tools like JIRA and GIT would be beneficial. Qualcomm is an equal opportunity employer committed to providing accessible processes for individuals with disabilities. If you require accommodations during the application/hiring process, please contact disability-accommodations@qualcomm.com.,

Role Overview: You will work with the Non-volatile Memory Design team at Sandisk to architect, design, and develop Nonvolatile memory products utilizing state-of-the-art technologies. Your responsibilities will include designing critical circuits, working closely with layout engineers, participating in full chip verification, documenting module specifications, proposing innovative circuit solutions, mentoring junior engineers, and ensuring timelines and quality of assigned assignments. Key Responsibilities: - Design, simulate, and verify critical circuits like Voltage regulators, LDO, Current and Voltage reference, High Voltage charge pumps, temperature sensors, oscillators using industry standard EDA tools - Work with layout engineers, review layout, provide input as needed, and perform post layout simulations of Analog blocks - Participate in Full chip verification to ensure analog block functionality at chip level - Build understanding on the analog function/circuit usage in system and its impact on chip power/area/performance - Document Module specifications, signal list, layout guidelines, and Checklist - Propose innovative circuit solutions and design methodologies, document and present new architectures, new and enhanced circuit designs, and simulation results during design reviews - Verify and characterize silicon using lab equipments and testers, correlate the simulation data with silicon data, and document the learning - Mentor junior engineers to learn and deliver the assignment - Ensure timelines and quality of assigned assignments Qualifications: - BTech/MTech from Premier institute - 4 + years design experience in Analog Circuits like Amplifiers, Bandgap, LDOs, Oscillators, switching circuit etc. - Understanding of layout and its impact on circuits - Well versed with industry tools to do analog design - Exposure to full chip simulations - Excellent documentation skills, Written and verbal communication skills - Good Team player, flexible and adapting to learn outside analog design e.g system integration, silicon validation (Note: No additional company information section was included in the provided job description.),

As an Analog and Mixed Signal Designer at our company, you will play a crucial role in leading and driving the development of cutting-edge embedded Flash Memory IPs. Your strong background in analog/mixed-signal design, along with hands-on experience in embedded Flash memory design and in-depth knowledge of device physics, will be key to your success in this role. Key Responsibilities: - **Technical Leadership**: - Oversee the design, development, and verification of analog and mixed-signal circuits for flash memory, such as charge pumps, voltage regulators, sense amplifiers, and memory interfaces. - Define and review circuit architectures to optimize performance, power, and area (PPA). - Drive innovation in circuit design to tackle industry challenges in scaling, performance, and reliability for flash technology. - Provide technical guidance to team members for timely project execution. - Collaborate with cross-functional teams globally, including layout, process, test engineering, and product teams. - Ensure that designs meet technical specifications, project timelines, and quality standards. - Identify and mitigate design risks to ensure robust circuit performance under process, voltage, and temperature variations. - **Collaboration and Communication**: - Work closely with flash bit-cell architecture and product teams to align circuit design with system-level requirements. - Interface with Process teams to optimize technology for flash/NVM applications. - Present project updates, technical reviews, and status reports to stakeholders and senior management. - **Innovation and Continuous Improvement**: - Stay updated on industry trends, emerging technologies, and best practices in embedded flash and analog design. - Drive continuous improvement in design methodologies, tools, and workflows. In this role, you will have the opportunity to contribute to the advancement of technology and work alongside a talented team to push the boundaries of innovation in the field of analog and mixed-signal design for embedded Flash memory.,

You will work with cross-functional teams on SoC Power and architecture for mobile SoC ASICs. Your responsibilities will include: - Defining chip and macro level power domains - System Level Power Modeling - Mixed signal power analysis - Power Island/Power Gating/Power Isolation - Structural Low power design of level shifter and isolation cell topology and associated rules - Architectural analysis and development of digital power optimization logic/circuits/SW - Working with Power Management IC developers for power grid planning - Creating detailed architecture and implementation documents You should have at least 8-15 years of experience in the following areas: - Low power intent concepts and languages (UPF or CPF) - Power estimation and reduction tools (PowerArtist/PTPX, Calypto) - Power dissipation and power savings techniques- Dynamic clock and voltage scaling - Power analysis (Leakage and dynamic) and thermal impacts - Power Software features for power optimization - Voltage regulators including Buck and Low Drop out - ASIC Power grids and PCB Power Distribution Networks Additional skills in the following areas are a plus: - Mobile Baseband application processors chipset and power grid understanding - UPF-based synthesis and implementation using Design Compiler - Structural low power verification tools like CLP or MVRC - Outstanding written and verbal communication skills Qualcomm India Private Limited is looking for individuals with the following education and qualifications: - Required: Bachelor's degree in Computer Engineering and/or Electrical Engineering - Preferred: Master's degree in Computer Engineering and/or Electrical Engineering - Minimum Qualifications: Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 6+ years of Hardware Engineering or related work experience. OR Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 5+ years of Hardware Engineering or related work experience. OR PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field and 4+ years of Hardware Engineering or related work experience. Preferred qualifications include: - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field - 12+ years of Hardware Engineering or related work experience - 3+ years of experience with circuit/logic design/validation (e.g., digital, analog, RF) - 3+ years of experience utilizing schematic capture and circuit stimulation software - 3+ years of experience with hardware design and measurement instruments such as oscilloscopes, spectrum analyzers, RF tools, etc. - 1+ year in a technical leadership role with or without direct reports As part of Qualcomm's team, you will leverage advanced Hardware knowledge and experience to plan, optimize, verify, and test highly critical electronic systems. Your responsibilities will include participating in or leading the implementation of advanced design rules and processes for electronic hardware, equipment, and/or integrated circuitry. You will collaborate with cross-functional teams to implement new requirements and incorporate the latest test solutions in the production program to improve yield, test time, and quality. Additionally, you will evaluate, characterize, and develop novel manufacturing solutions for leading-edge products and advise and lead engineers in the development of complex hardware designs. Qualcomm India Private Limited is an equal opportunity employer committed to providing an accessible process for individuals with disabilities. If you need accommodation during the application/hiring process, you can email disability-accommodations@qualcomm.com or call Qualcomm's toll-free number. Qualcomm expects its employees to abide by all applicable policies and procedures, including those regarding the protection of confidential information. Please note that Qualcomm does not accept unsolicited resumes or applications from agencies. Staffing and recruiting agencies should not submit profiles, applications, or resumes on this site. For more information about this role, please contact Qualcomm Careers.,

Role Overview: You will need to work in collaboration with global design teams across sites to drive innovation in Analog IP designs. Your responsibilities will include designing IPs like Switched capacitor circuits, Voltage regulators, LDO, Current and Voltage reference, High Voltage charge pumps, temperature sensors, oscillators, etc. using industry standard EDA tools. Additionally, you will provide technical leadership, mentor junior engineers, develop processes, robust design methodology, and help build overall competency in the Analog domain. Key Responsibilities: - Collaborate with global design teams to drive innovation in Analog IP designs - Design various IPs like Switched capacitor circuits, Voltage regulators, LDO, Current and Voltage reference, High Voltage charge pumps, temperature sensors, oscillators, etc. - Provide technical leadership and mentor junior engineers - Develop processes and robust design methodology - Help build overall competency in the Analog domain Qualifications: - Bachelors/Masters degree in Electrical/Electronics Engineering with 8+ years of experience in Analog Circuit Design across different technologies - Experience in developing analog IPs like Switch capacitor circuits, LDO, DC-DC convertor, oscillator, ADCs - Experience in integrating Analog IPs in a complex system - Knowledge of PCB and system design will be preferred - Experience in silicon characterization and probing - Experience in a multi-site environment, interacting with teams in other sites - Possess good mentorship skills - Ability to coordinate priorities and initiatives Company's Additional Information: Sandisk believes in the power and potential of diversity. As a global company, they value embracing diversity from within to mirror the diversity of their customers and communities. They believe in the fusion of various perspectives to achieve the best outcomes for employees, company, customers, and the world. Sandisk is committed to providing opportunities to applicants with disabilities and ensuring a successful navigation of the careers website and hiring process for all candidates. For accommodation requests, please contact jobs.accommodations@sandisk.com with a description of the specific accommodation needed, along with the job title and requisition number of the position applied for.,

As a Principal/Staff Circuit Engineer specializing in PMIC/Clock IC, your role involves leading the design and development of advanced power-management circuits and PLL IPs for complex SoCs. Your expertise in analog/mixed-signal technologies is crucial for success in this senior technical position. Key Responsibilities: - Lead the design of various power-management circuits including LDOs (ultra-low noise, capless, fast-transient), DC-DC converters (PWM/PFM), and voltage regulators. - Design and implement high-performance PLL circuits for frequency synthesis and clock generation. - Conduct advanced transistor-level simulations, modeling, and analysis to ensure performance and robustness. - Collaborate closely with layout teams to provide guidance on floorplanning, layout practices, and physical design reviews. - Oversee lab bring-up, silicon debug, and characterization of PMIC and PLL circuits. - Define specifications and system-level requirements in coordination with architecture and SoC teams. - Mentor and support junior engineers in circuit design, simulation, and lab methodologies. Qualification Required: - Bachelor's or Master's degree in Electrical Engineering or a related field. - 10+ years of hands-on experience in power-management and PLL circuit design. - Strong foundation in analog/mixed-signal fundamentals and feedback loop stability. - Expertise in designing LDOs, DC-DC converters, voltage regulators, and PLL building blocks. - Proficiency with industry-standard simulation tools such as Cadence Virtuoso, Spectre, ADE, etc. - Extensive experience with lab testing, silicon validation, and characterization equipment. In this role, your deep expertise and leadership will be instrumental in driving innovation and ensuring the successful development of cutting-edge power-management and PLL circuits for complex SoCs.,