Turn an SVG into a Wood Inlay Design in 3 Easy Steps (Video Included)

You can turn any one-dimensional SVG file into a wood inlay design perfect for laser cutting. 

It only takes a few quick clicks in Silhouette Studio to turn an ordinary SVG file into a three dimensional file! 

Game Changer: Make Wood Ornaments with DTF Transfers

DTF transfers aren't just for apparel. You can put them on wood too and it's a game changer! 

Most people think direct-to-film transfers are only for shirts, but they work really well on wood surfaces like ornaments, magnets, and signs. 

In this tutorial I'm going to walk you through how you can take a basic wood ornament and apply a DTF transfer in less than 15 seconds with stunning results. 

How to Make Reusable Stencils with Your Silhouette and a $20 Laminator

If you're looking for a way to make reusable stencils for wood signs - this money saving trick for making stencils you can paint, rinse and repeat is a good one! 

Keep reading for the full game-changing tutorial that requires nothing more than your Silhouette CAMEO or Portrait and a $20 Amazon laminator.  

Laser Engraving Trick: Use Score for Perfect Placement

Layered laser cut projects that have multiple pieces to place can be tricky and time consuming to assemble if you don't know this one trick.  

Read on to see why scoring is the key to perfect layered laser projects!  

Explained! What is Kerf in Laser Cutting?

If you've heard the term "kerf" in laser cutting but aren't sure what it is...you're in the right spot. 

When laser cutting, a portion of the material is eroded or burned away by the laser itself.  Because of this when you cut two pieces of material out of each other the middle one will "fall out".  Enter kerf. 

Freezer Paper Stencils for the Win! Painted Wood Sign Tutorial

If you haven't tried making freezer paper stencils yet, you're missing out especially when painting on fabric including shirts or burlap. 

Freezer paper is a cheap stencil material that can be easily cut with a Silhouette CAMEO or Portrait. It adhesive easily and removes without leaving any gunk behind! Read on for how tips on cutting freezer paper stencils for a sign! 

How to Put DTF Transfers on Painted Wood Signs

You can use DTF transfers on painted wood signs, rather than a stencil or vinyl to make custom signs in minutes. 

In this tutorial I'll show you just how easy it is to create wood sign transfers saving you tons of time! 

How to Sublimate on Wood

Take your sublimation to the next level by creating sublimated wood projects! 

This process is super cool and uses thermal laminating pouches - like the kind you use in a laminator. In this tutorial, we'll show you exactly how to laminate on wood. 

How to Use Silhouette Studio Files with Craft Laser Engraver (Glowforge or xTool)

Did you know you can use Silhouette Studio files with craft laser engravers and cutters?! 

If you're proficient and comfortable in Silhouette Studio there's no reason you can't design in the Silhouette software and then cut or engraver on a Glowforge or xTool laser.  Read on to learn how to use Silhouette Studio files with a laser. 

How to Paint Wood Round Signs with a Vinyl Stencil (to Avoid Paint Bleed)

There are several ways to customize a round wood sign and painting it with a one-off vinyl stencil is one of them. 

Vinyl is a good option for making stencils that will only be used once because it's quick to cut, easy to weed, and inexpensive to make. But nothing ruins a project faster than paint bleed.  In this tutorial I'll share some tips on how to paint wood rounds with vinyl to avoid the dreaded paint bleed! 

Using a Heat Press for Torch Paste Crafts (Plus the Supply List)

Did you know you can use a heat press to activate torch paste for wood burning? 

If you're used to using a heat gun for torch paste, using a heat press can speed up the process and allow you to heat up multiple piece of wood at the same time. 

Check out this video for how to use torch paste with a heat press...and I've included a shoppable supply list below.

Note: This post may contain affiliate links. By clicking on them and purchasing products through my links, I receive a small commission. That's what helps fund Silhouette School so I can keep buying new Silhouette-related products to show you how to get the most out of your machine!

Get Silhouette School lessons delivered to your email inbox! Select Once Daily or Weekly.

Subscribe Here!

 

Engraving and Torch Paste: What's the Difference?

If you are a crafter who uses either a Silhouette CAMEO or Glowforge, you know there are several ways to make your projects look beautiful. However, if you’ve ever asked yourself “Is Torch Paste Comparable to Engraving?” then this blog post is for you!

Let’s explore the differences between engraving and using torch paste so we can determine if torch paste is all you need.

How To Foil Quill On Balsa Wood

Looking for a creative new way to spruce up your kitchen? Look no further – today, I'm going to show you how to make a unique sign with the foil quill and balsa wood. 

With this simple technique, you'll be able to craft an eye-catching home décor piece that will have your guests impressed. So come join me as we explore the beauty of foil quill on balsa wood!

Wood Burning Signs: Quick and Fun Silhouette Craft for Camping Theme

If you're looking for fun Silhouette crafts...camping themed crafts are always a winner. 

Pair custom cut stencils, torch paste, and unfinished wood blanks to create camping theme Silhouette crafts. Read on for a quick Silhouette tutorial on how to get started wood burning for beginners! 

How to Line Up Vinyl Letters on Vertical Wood Signs

Let's make some Dollar Tree crafts using Silhouette!

Check out this blog post about how to line up vinyl letters on a Dollar Tree DIY Christmas 2022 vertical welcome sign.

How to Use Printable Heat Transfer Vinyl on Wood

Heat transfer vinyl on wood is a game changer for so many reasons!! 

In this tutorial I'll show you how to put heat transfer vinyl on wood...and why this thicker inkjet printable HTV is my go to for signs! 

How to Change SVG Size in Silhouette Studio to Fit Project

When you've found the perfect SVG design for your project, but you need to change the SVG size, it's easy to do in Silhouette Studio. 

You might need to modify an SVG file for any number of reasons including changing the SVG color or it's layout.  This tutorial will show you how to change SVG size and layout so the design perfectly fits. 

How to Make and Paint Layered Stencils

If you love the look of those crisp paint lines on a stenciled design, then check out how to make and paint layered stencils - which take stencils to a whole new level! 

In this tutorial we'll share how to turn an SVG into a layered stencil in Silhouette Studio. 

19 Halloween Projects with Silhouette CAMEO...to Make, Decorate, and Wear!

If you're in need of some Halloween project ideas to make with your Silhouette, you've come to the right spot. 

I have gathered 19 of my favorite DIY Halloween projects from over the years and put the tutorials all in one spot for you!  From Halloween nail art to stickers to customized candy buckets to Halloween front porch signs and even a Tide pod upcycle your kids will love! 

How to Sketch on Wood with Silhouette CAMEO 4

Ever want to sketch on wood with Silhouette CAMEO?

It's possible to use your Silhouette CAMEO 4 to draw or sketch on thin wood to make signs! If you've ever sketched on paper or cardstock, this process is almost exactly the same - there's just a few things you want to do a little differently to get the best results when sketching on wood.