{{t.titulosHerramientas.nube}}

{{t.titulosHerramientas.numeros}}

Productivity and technological quality in sugarcane ratoon under subsoiling between planting rows in the northeast region of Brazil

Abstract: Different soil management systems can change the sugarcane yield and quality parameters for sugar/ethanol production. The objective of this study was to evaluate the effects of subsoiling on the inter-row of sugarcane ratoons after the second harvest on produ

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Analysis of the dimensional variation of 3D printed objects (FMD) subjected to annealing postprocessing

Abstract: The annealing process in FDM printing applying materials such as PLA and HTPLA, is a technique that looks for the improvement of the mechanical characteristics of post-printing products. The aim of the research is to determine the most suitable annealing proc

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Vehicle maintenance management based on machine learning in agricultural tractor engines

Abstract: The objective of this work is to use the autonomous learning methodology as a tool in vehicle maintenance management. In obtaining data, faults in the fuel supply system have been simulated, causing anomalies in the combustion process that are easily detectab

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Economic design optimization of RC road bridges under current conditions in Cuba

Abstract: This paper presents an algorithm for the optimization of the design of reinforced concrete (RC) road bridges, taking into account the current conditions in Cuba. The use of RC is chosen over the common solutions due to the current high economic cost of prestr

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Rehabilitation and reforms of issues in vehicle parks lots and tower blocks structures
Mohankumar N. Bajad

Abstract: Unsafe, offensive, and damaging to the environment. Homeowners and builders are searching for efficient ways to transform worn-out houses into desirable ones in light of these difficulties. In this study, we sought to address the issue of rehabilitation and r

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Hospital rough cut capacity planning in a General Surgery service

Abstract: Hospital services constitute a fundamental pillar in the development of society. The objective of this article is to provide medium-term capacity planning improvements in a General Surgery service. A procedure was designed for capacity planning based on proce

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Weighted Average Bridge Inspection Methodology (WABIM)

Abstract: This article discusses developing a methodology based on visual inspection for quantifying bridge damage (WABIM). The proposed methodology was developed through the application of weighted averages and a case study. Many current visual inspection methodologie

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Do Internet search patterns predict election results? An analysis of the 2022 presidential election in Colombia using a reproducible descriptive analytics framework

Abstract: Recent works have highlighted the relevance of Google Trends data for predicting electoral processes. However, the potential for the generalization of this evidence is still limited and there is still no consensus on the most appropriate method for performing

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Evaluation of the productivity quality of the cocoa bean according to the Theory of Practice (TP) and Artificial Intelligence: a systematic review

Abstract: This article focuses on the need to involve concepts from different disciplines that involve Theory of Practice (TP) and Artificial Intelligence (AI) with different structural elements for an agricultural system in the productivity and quality of the cocoa be

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Exergetic evaluation of a pilot plant for the integral use of oranges: a case study

Abstract: In this investigation, two alternatives to improve a pilot plant for the integral use of oranges were evaluated from the exergetic point of view. The case study was based on information provided by the project "Integrated Evaluation with Sustainability Criter

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Physicochemical, antioxidant, and technofunctional properties of mushroom (Pleurotus sp) flour obtained by hot air drying

Abstract: The edible mushroom Pleurotus sp. is recognized as an important source of biologically active compounds. However, its high moisture content makes it perishable. Drying the mushroom into flour is an alternative to add value and extend its shelf life. The purpo

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Assessment of LES Dynamic Smagorinsky-Lilly model resolution for combustion engineering applications

Abstract: Large Eddy Simulation (LES) has become a powerful tool for dealing with turbulence. Nevertheless, mesh resolution of the simulated domain under the LES approach was shown to be a key matter. Critical regions should maintain an adequate mesh resolution and als

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Identifying relevant factors about work accidents in the road transport sector and the deaths relation in this scenario

Abstract: Workers’ health and safety are a major concern in society, since work accidents have a major impact on productivity and economy. In Brazil, the accidents are officially reported through Work Accident Communication and they are available to the public. Thus, t

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Calibration and validation of models to estimate the hydraulic parameters of a confined aquifer in a tropical region

Abstract: This article deals with the calibration and validation of models for water yield from a confined aquifer in a tropical region. From 2015 to 2019, 20 variable flow pumping tests were carried out. The average pumping flows varied between 0.07 and 17.4 L/s; the

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Behavior of a new laterally top-loaded post-grouted micropile in highly porous lateritic soil

Abstract: The use of micropiles has been increasing in recent years, mostly for horizontally loaded cases. Given the little information about this foundation type under lateral top-loading, especially in high-porosity and collapsible soils, a total of four transversal

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Rotational inertia-based tuned-mass-damper for controlling force transmission

Abstract: Nowadays, the inerter device has become one of most popular mechanical devices in the vibration absorption field for both stationary and non-stationary mechanical structures. One of the problems commonly reported in the literature is the force transmission co

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Metamodel simulation for designing monopole telecommunication antenna support structures

Abstract: Finite element analysis is used to estimate the displacements and forces present in each element of a structure. This type of analysis is time consuming in pre-processing, processing, and post-processing. It also incurs considerable computational costs. A sim

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Time dependence in the synthesis of Cu2FeSnS4 and some of its properties

Abstract: Polycrystalline Cu2FeSnS4 materials (abbreviated CFTS) were synthesized by a hydrothermal route implementing a one-step thermal treatment to measure dependence on different reaction times in the stabilization and structural, vibrational, and optoelectronic pr

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Experimental analysis of combustion with the use of ethanol-biodiesel-diesel blends in diesel generator sets

Abstract: This study aims to experimentally investigate the effects of using different percentages of ethanol-biodiesel-diesel blends in diesel internal combustion engines and to analyze energy and combustion parameters. The experiments were conducted on a single-cylin

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}
Analysis and experimental validation of soils liquefaction through granulometric study

Abstract: Liquefaction phenomenon is a problem related to soil conditions that can entail a high risk for civil infrastructure and people, and therefore requires an adequate understanding of its causes. The present work analyzes the influence of the granulometry of the

en es

{{t.titulosSecciones.herramientas}}
{{t.titulosSecciones.compartir}}

Criterios de Evaluación
Criterios Básicos de Admisión Criterios Básicos de Admisión
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
Criterios Altamente Valorados / Criterios Deseables Criterios Cualitativos
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}
Criterios Altamente Valorados Cuantitativos
{{criterio.prioridadCriterio}}. {{criterio.observaciones}}