Bosch BNO055 Driver

Unified sensor driver for the Adafruit BNO055 orientation sensor breakout

Bluetooth gesture-controlled remote using ESP32 and BNO055 sensor.

This project is designed to harness the capabilities of Arduino, an electronic compass, and an inertial measuring unit (IMU) BNO055 to control an SG90 servo motor using the HW-170 PCA9685 driver, all communicating over the I2C Bus

Using a ESP32-S3 to emulate a GS-232 satellite rotator controller for gpredict

Source code and circuit diagram for using heading information from a sensor for direction control of Free flight model FAI-Categorie F1E

Arduino Code for robot automation using BNO055 magnetometer and MKR GPS

DIY autopilot for sailing boat. Goto to wiki to get informations

Small RGB LED Pendant using 1010 (1.0x1.0mm) WS2812B LEDs powered by an ESP32-C3 Mini with a BNO055 IMU

Arduino library for the 7Semi BNO055 9-axis IMU sensor. Supports I2C, Euler angles, quaternions, and calibration tools.

bno055 library for platformio

Example how to interface the accelerometer sensor on the Octopus IoT badge and display on a LED matrix.

This repository provides code to interface multiple TCA9548A multiplexers with BNO055 IMUs. It includes examples and wiring diagrams. The code addresses common issues like sensor initialization failures and data conflicts.

Switch having 8 states realized by hosting an Octopus board inside a octahedron object.

A tool for quantifying Cerebral Palsy severity and treatment effect.

Unified sensor driver for the Adafruit BNO055 orientation sensor breakout

BNO055 IMU sensor driver for the Raspberry Pi Pico

F1E electronic magnetic steering device / direction control by magnetic sensor BNO055