Материалы проекта по разработке модуля исследования воды

Joint Project, Developed unique single-cut paper chassis

A custom built sim race steering wheels powered by a Rasp Pico.

ATmega32u4 controlled board with Cherry MX Blues that act as macros.

This is an active mirror of the KiCad development branch, which is hosted at GitLab (updated every time something is pushed). Pull requests on GitHub are not accepted or watched.

Macroboard powered with Arduino Leonardo

Multidiscipline programming, electronics and CAD project for my sister's Christmas present.

The project objective is to develop a CAD (Computer Aided Design) tool to simulate simple AC circuits that contains only (independent voltage sources, independent current sources, dependent voltage source, dependent current source, resistors, capacitors, and inductors).

Computer Aided Design and Computer Graphics Projects

Final project for 3D modeling in CAD, the course of ZJU.

My Digital Fabrication Portfolio created for the 2024 Digital Fabrication Fab Academy overlay course at Aalto Fablab, containing extensive documentation for 6 months worth of hands-on learning in designing and manufacturing a wide variety of projects with a variety of different processes.

.stl to .step file converter using a approximated-stitching approach

Final project of NTHU CS5160 FPGA Architecture & CAD (2022 Fall)

Class to load/save STL files

Bionic arm made with Arduino uno

Proximity-Based Charger Safety System

Custom Arduino-based morse code keyer.

Repositori ini berisi proyek Filament Roller yang dirancang dan dibuat dari awal (from scratch) menggunakan Arduino, motor stepper, serta beberapa komponen pendukung lainnya seperti keypad. Fitur Utama penentuan Jumlah Gram Filamen Pengguna dapat memasukkan jumlah gram filamen yang diinginkan menggunakan keypad.

Minimal CAD.