Text only Arduino Library for SSD1306 OLED displays

implemented SPI transfer protocol on proteus using ATSAM3N4A micro and assembly coding

Using Python、HTML、Bootstrap、Raspberry-Pi to build an environment detection and plant-care system.

Sub-monthly standardized precipitation index calculation in Python

Criar uma página de divulgação para uma empresa. (trabalho Acadêmico)

Lightning sensor module based on AS3935 Franklin Lightning Sensor IO. Sensor can be connected via I2C or SPI bus.

High-accuracy barometric pressure and temperature sensing module with MS561101BA03.

In this project, the Bosch BMP280 sensor is integrated with an STM32 microcontroller using bare-metal, low-level register-based firmware. Communication is handled via I2C and SPI protocols. The firmware captures sensor data and outputs it to a 16x2 LCD display, demonstrating effective real-time data acquisition and display.

SPI (bus) expander to control multiple devices from the one SPI master.

USB to SD Card Reader module featuring MAX14502AETL, supports USB 2.0 and SDHC cards.

A reliable shield designed to ensure safe and isolated communication between the Jetson Nano and other embedded platforms.

An extended SPI TFT PMOD with sd.

OLED module with SSD1306 controller, I2C interface level shifter, integrated buzzer, touchscreen, and LEDs.

Guide For Working With AVR Microcontrollers.

IMSProg - software for CH341A-based programmers to work with I2C, SPI and MicroWire EEPROM/Flash chips (Latvian translation)

MCU-EHAL — Portable, layered embedded drivers and hardware abstractions for any microcontroller.

IMSProg - software for CH341A-based programmers to work with I2C, SPI and MicroWire EEPROM/Flash chips

Ambilight DIY project - is an example of the implementation of ambient lighting for TVs based on the analysis of video and audio streams to add a halo to the image on the screen itself and, as it were, visually increase its size.