Top speed 238 km/h Weight 607 kg Engine type Continental O-300 Number of seats 4 | Wingspan 11 m Length 8.08 m | |
Cessna 175 skylark 1080p
The Cessna 175 Skylark is a four-seat, single-engine, high-wing airplane produced by Cessna between 1958 and 1962.
Contents
- Cessna 175 skylark 1080p
- Production history
- Design
- The GO 300 engine
- Variants
- Specifications Cessna 175A
- References
Production history
The 175 was designed to fill a niche between the Cessna 172 and the faster Cessna 182. The engine of the 175, a geared version of the O-300 used in the 172, is rated at 175 hp (130 kW), or 30 hp (22 kW) more than the 172 engine. Between 1958 and 1962, a total of 2,106 were built. The basic airplane was marketed as the 175, and the plane with a package of optional equipment and overall paint (a partial paint scheme was used on the basic model) was marketed as the Skylark.
Design
The airframe of the 175 is all metal, constructed of aluminum alloy. The fuselage is a semi-monocoque structure, with exterior skin sheets riveted to formers and longerons. The strut-braced wings, likewise, are constructed of exterior skin sheets riveted to spars and ribs. The landing gear of the 175 is in a tricycle arrangement, with main gear legs made of spring steel, along with a steerable nosewheel connected through an oleo strut used for shock absorption.
While it incorporates airframe changes to accommodate an increased gross weight, the 175 is very similar in appearance to the 172 of the same vintage. The most noticeable difference is the distinctive bulge in the cowling of later series airplanes to accommodate the gearbox of the engine. Although externally identical to the 172, the 175 was built to a different type certificate, although most parts aft of the firewall are interchangeable. The 172XP and T-41B/C/D Mescalero share the 175 type certificate.
The GO-300 engine
An unusual feature of the 175 is the geared Continental GO-300 engine. Whereas most single-engine airplanes use direct drive, this engine drives the propeller through a reducing gearbox, so the engine runs at 3200 rpm to turn the propeller at 2400 rpm. The GO-300 engine suffered reliability problems and helped give the 175 a poor reputation. Some Skylarks flying today have been converted to larger-displacement direct-drive engines though almost 90% still retain the GO-300.
The GO-300's tainted reputation was largely undeserved, since its problems were the result of pilots who were unfamiliar with gear reduction engines simply not operating the engine as specified in the C-175 Pilot's Operating Handbook. Pilots unfamiliar with the engine often operated the engine at the low RPM settings (2300-2700) appropriate to direct-drive engines, while the 175's Operating Handbook called for cruising at 2900 RPM. The low RPM caused harmonic vibration in the reduction gear between the quill shaft (that turned the propeller) and crankshaft, and the low power resulted in low airspeeds that prevented the engine's air-cooling system from operating effectively . . . resulting in chronic reliability problems for engines not operated at the recommended power settings.
Variants
Many of the higher-powered versions of the 172 in fact belong to the 175 type design, such as the P172D Powermatic; the military T-41B, -C, and -D; the R172J and R172K Hawk XP; and the retractable-gear 172RG.
Specifications (Cessna 175A)
Data from FAA type certificate sheet
General characteristics
Performance