Best M8 Tap Drill Bit
Best results for m8 tap drill bit
Bosch CO2148 21/64 In. x 4-5/8 In. Cobalt Drill Bit
$12.27
$13.74
Last update was on: January 10, 2025 2:52 pm
- Tap and drill Combo pack offers correct drill size for the tap in one convenient package
- Tap offers precision cut threads, accurately formed for consistent, exact threading
- Tap is heat treated and tempered for file hard threads, and longer, useful life
- Tap designed for hand cutting applications
- Drill bit made of premium grade high speed steel
Century Drill & Tool 97413 8.0×1.25 Metric Tap and Letter H Drill Combo Pack
$9.99
$14.19
Last update was on: January 10, 2025 2:52 pm
- 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements
- Drilling, tapping and deburring/countersinking in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Quick change 1/4 Inch (6.35mm) hex shank with metric sizes engraved on the bits. Wide spiral flutes carry the chips out of the hole. Can be used on multi-spindle heads with reversing mechanisms for tapping in most materials
XT AUTO 6pcs HSS Metric Hex Spiral Flute 2-in1 Combination Drill and Tap Bit Set M3-M10 with 1/4" Hex Shank Set
$13.19
$16.49
Last update was on: January 10, 2025 2:52 pm
- Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron, etc.
- Fast replacement composite cone, uses drill edged principle.
- Shank Dia: 6.35mm 1/4 Hex Shank
- Material: High speed steel
- Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
Nxtop 6pcs Combination 1/4" Hex Twist Tap Drill HSS M3-M10 Bit Screw Countersink Hexagonal Handle Metric Taps White Diamond/Titanium Plated
$11.99
$14.99
Last update was on: January 10, 2025 2:52 pm
- Drilling - clear the damaged threads with a standard drill. (to repair a spark plug thread no pre-drilling is necessary if using the special spark plug tap), please pay attention that for fluteless taps bigger holes are required.
- Checking - check that the thread and pitch of the tap and the bolt match.
- Tapping - use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil).
XT AUTO 30pcs Stainless Steel M8 x 1.25mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing
$20.79
$23.70
Last update was on: January 10, 2025 2:52 pm
- MATERIAL: Impact Tough HSS Drill Bit Set. Surface is coated with titanium or not for anti-oxidation and makes these cutters more durable.
- SELF-CENTERING DESIGN: Self-centering point, do not need assistant center drilling or center punching. High hardness, rustproof, solid and durable.
- TIME SAVER: Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
Spiral Tap Drill Bit Set by Volterin, 6 Pcs Titanium Coated HSS 6542 Fluted Machine Screw Tap Kit, Hex Shank Combination Drill Tap Bit Spiral Screw Tap Set M3-M10, Gold w/Carry Case
$11.99
$15.95
Last update was on: January 10, 2025 2:52 pm
- 1/4 Inch Hex Shank HSS Drill Bit & Screw Tap Set
- Metric M3,M4,M5,M6,M8,M10 thread countersink screws can be tapped with this drill and tap set
- Metric: M3 x 0.5mm,M4 x 0.7mm,M5 x 0.8mm,M6 x 1.0mm,M8 x 1.25mm,M10 x 1.5mm
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated
- Suitable for drilling, tapping, cutting on soft metal tapping, aluminium plate, iron plate
Breynet 6pcs Combination Drill and Tap Bit Set 1/4" Hex Shank HSS M3-M10 Twist Drill Bit, Metric Countersink Drill Bit Set
Vermont American 21139 9MM-1.25 High Carbon Steel Metric Plug Tap
$14.39
$15.97
Last update was on: January 10, 2025 2:52 pm
- 1/4 Inch Hex Shank HSS Drill Bit & Screw Tap Set
- High speed steel with Titanium coating,which supports much longer service life
- Metric M3,M4,M5,M6,M8,M10 thread countersink screws can be tapped with this drill and tap set
- M3 x 0.5mm pitch,M4 x 0.7mm pitch,M5 x 0.8mm pitch,M6 x 1.0mm pitch,M8 x 1.25mm pitch,M10 x 1.5mm pitch
- These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated
Nxtop 6Pcs Metric Thread M3-M10 Screw Tapping Tool 1/4" Hex Shank Titanium Plated HSS Combination Drill and Tap Set
$10.48
$13.62
Last update was on: January 10, 2025 2:52 pm
- The material is HSS 4341, high hardness, high wear resistance, high heat resistance tool steel.
- Suitable for fast drilling and tapping machining.
- Suitable for wood, aluminum, iron and other materials with low hardness.
- Better to be used in tapping machine rather than hand electric drill.
- 1/4 inch hex shank, 6 sizes in one set.
Wolfride 6Pcs 1/4 Hex Shank Combination Drill and Tap Bit Set Metal Deburr Countersink Drill Bit 1/8 inch-3/8 inch
$13.45
$16.14
Last update was on: January 10, 2025 2:52 pm
- Complete hole drilling, tapping, deburring and countersinking in one operation with power drill saves labor and time
- Back tapered beyond tap to prevent thread damage from over-drilling
- Deburr/countersink also provided on bit beyond back taper
- Made from hardened high-speed steel vs carbon steel for longer life
- Designed to tap up to 10-gauge metal
Greenlee DTAPM8C Combination Drill and Tap Bit, M8
$15.99
$18.55
Last update was on: January 10, 2025 2:52 pm
- Material: HSS (4341) High hardness, rustproof, solid and durable
- Self-centering design: do not need additional center drilling or center punching
- Fast replacement composite cone, uses drill edged principle. Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency.
- Metric: M3x0.5, M4x0.7, M5x0.8, M6x1, M8x1.25, M10x1.5.Shank:1/4 inch (6.35mm) hex shank
6 Pcs 1/4" HSS Spiral Hex Shank Combination Drill Screw Tap Bit Set (M3-M10) with Automatic Spring Loaded Center Punch Tool – Gold
Irwin Tools 2734- 3 Piece Set – Tap 8 mm -1 25
$11.70
$15.44
Last update was on: January 10, 2025 2:52 pm
- This tap and drill set contains a convenient HCS tap and HSS drill bit
- Self-aligning taps start and thread straight virtually every time
- Great for through holes and irregular surfaces
- Plug taps are ideal for general purpose threading
- Special chip-breaking technology cuts chips easier