Adding molding to doors

Hollow Core Bore to a Beautiful Updated Door: Do THIS to your boring doors to make them look so much better - and it costs just $20! - A little bit of effort, and a whole lot of wow!

The boring, flat panel interior doors were really dating our home. However, I didn't want to spend the money to replace them all. So, we decided to use plywood…

Here we're sharing how we made over a boring flat panel door into a beautiful statement for under $20! I'm a beginner and if I can do this project you can too!

The boring, flat panel interior doors were really dating our home. However, I didn't want to spend the money to replace them all. So, we decided to use plywood to give them the effect of molding. Cut 1/4" plywood into strips. You'll have to do math to determine the size that you want the boxes to be on each door. Check your math 3 times because we sure did mess it up! Draw a diagram for best results, and then tape the design onto the door to be sure. There's more details on that pr…

I'm renovating a house and don't want to put new doors in the budget. I have several old hollow doors made out of that cheap would material and most have stickers all over them and yes they are a nasty dark brown. Thank you

My rolling French doors are taking longer than I had expected. I spent several hours on Tuesday stripping the many layers of paint from the doors (I think there were about 8 to 10 layers of paint on them), and then I spent yesterday getting them all sanded, wood filled, and sanded some more. And...

Pros: top moulding and bottom trim where floor trim meets Cons: would need to buy

Another quick update that looks great and low cost! Our clients had solid panel doors throughout the house... They are fine but are ...

Happy Monday guys!!! (The sun is shining here…so it feels extra happy!) I have been meaning to share with you a little more about how we tore out all our old

Want to upgrade your boring flat panel doors? This DIY door makeover shows how to update hollow core doors with trim & paint for a new look!

DIY farmhouse custom door trim that is easy and inexpensive!

Update 9-25-17 Floor and Fixtures 6-5-17 Over the weekend I added the trim to the bathroom door and painted. The Parts of the door trim are similar to the pillasters on the sliding door. They are recessed and built by using 3/4" MDF and panel moulding. The top portion was built using pine on and using a method on the table saw of making a raised panel similar to a cabinet door. There is crown moulding on the top and some smaller panel moulding under that too. Here it is in place before being…

A trend started about 10 years ago that I took note of then, but didn’t do and that trend was painting interior doors black (yes, both sides!). Have you noticed that one? It’s one of

A small doorway update that adds a ton of character! from Thrifty Decor Chick

Easily update flat doors with molding -- lots of different styles and inspiration! @Remodelaholic