BTAS PRO - TRON Edition Wiki

Table of Contents

1. Introduction
2. Prerequisites
3. Setup
4. Configuration
5. Wallet Setup
6. Running BTAS PRO
7. Sweep Modes
8. Understanding Output
9. Troubleshooting
10. Best Practices
11. Support

Introduction

BTASPRO (Tron Edition) is an automated tool designed to efficiently collect TRX and TRC-20 tokens from multiple wallets and consolidate them into a single destination wallet. The tool continuously monitors your wallets and automatically transfers any available funds to your main wallet.

🔒 Note: This tool is distributed in obfuscated form to protect its proprietary logic and prevent unauthorized redistribution. This does not affect functionality or usage for legitimate users.

Key Features:

• Automatic TRX sweeping from multiple wallets
• TRC-20 token sweeping with smart contract interactions
• Real-time monitoring and status updates
• Automated cycling with configurable intervals
• Comprehensive logging and statistics
• Support for both TESTNET and MAINNET

Prerequisites

Before using BTAS PRO, ensure you have the following installed on your system:

Required Software

Node.js v22.15.0 LTS

• Download from: https://nodejs.org/
• Choose the "LTS" (Long Term Support) version
• Verify installation by opening terminal/command prompt and typing: node --version
• You should see: v22.15.0 (or similar)

Latest npm (Node Package Manager)

• Usually comes with Node.js
• Verify by typing: npm --version
• Update if needed: npm install -g npm@latest

System Requirements

• Windows 10/11, macOS 10.15+, or Linux
• Stable internet connection
• At least 100MB free disk space

Setup

Follow these steps to set up BTAS PRO:

Extract Files

1. Extract the BTAS PRO package (btaspro-vX.X.zip) to your desired location
2. Open a terminal (or Command Prompt)
3. Navigate into the BTAS PRO folder:

cd path/to/BTAS-PRO-folder

💡 All required dependencies are already bundled and obfuscated.
You do not need to run npm install.

Configuration

Step 1: Create Environment File

1. Locate the env_sample file in your BTAS PRO folder
2. Copy this file and rename the copy to .env
3. Open the .env file in a text editor

Step 2: Network Selection

Choose between TESTNET (for testing) or MAINNET (for real transactions):

For TESTNET (Recommended for first-time users):

• Keep the current settings as they are
• TESTNET uses fake TRX for testing purposes
• No real money is involved

For MAINNET (Real transactions):

• Uncomment the MAINNET lines by removing the # symbol:

FULL_HOST=https://api.trongrid.io

• Comment out the TESTNET line by adding #:

# FULL_HOST=https://nile.trongrid.io

• Update the contract address:

CONTRACT_ADDRESS=TVXKK6wa6DbvenDwW3triaJktUfBoFf76D

Step 3: Configure Your Destination Wallet

DESTINATION_ADDRESS:

• This is where all collected TRX and tokens will be sent
• Replace TV..............................GD with your actual TRON wallet address
• Example: DESTINATION_ADDRESS=TQn9Y2khEsLJW1ChVWFMSMeRDow5KcbLSE

DESTINATION_PRIVATE_KEY:

• This is the private key for your destination wallet
• Replace 431..............................B9 with your actual private key
• IMPORTANT: Keep this private key secure and never share it

API Key (Optional but Recommended):

• The included API key works for basic usage
• For heavy usage, get your own free API key from https://www.trongrid.io/
• Replace the TRON_API_KEY value with your personal key

Step 4: Timing Settings (Optional)

You can adjust these settings if needed:

• RATE_LIMIT_MS=100 - Delay between API calls (milliseconds)
• CYCLE_PAUSE_MS=60000 - Wait time between sweep cycles (60 seconds)
• BACKOFF_ON_503_MS=3000 - Wait time when hitting rate limits

Wallet Setup

Preparing Your Wallets

1. Create a file named wallets.txt in the BTAS PRO folder (if it doesn't exist)
2. Add one private key per line
3. Each private key should be 64 characters long
4. Example format:

A1B2C3D4E5F6789012345678901234567890123456789012345678901234567890

Important Notes

• Never share your private keys with anyone
• Make sure each private key is valid (64 hexadecimal characters)
• The tool will automatically derive wallet addresses from these private keys
• You can add as many wallets as needed (practical limits depend on your machine and RPC provider)
• Keep a backup of your wallets.txt file in a secure location

Running BTAS PRO

Starting the Application

1. Open terminal or command prompt
2. Navigate to the BTAS PRO folder
3. Run the tool using either of the following methods:

Method 1: Using npm

npm start

Method 2: Using node:

node btaspro.js

✅ Both methods launch the tool via the provided launcher script (btaspro.js) which internally runs the protected core in dist/btaspro.obf.cjs.

Initial Startup

When you start BTAS PRO, you'll see:

1. ASCII Art Banner - Shows "BTAS PRO" in large letters
2. Developer Information - Credits and contact details
3. Wallet Loading - Confirmation of how many wallets were loaded
4. Main Menu - Options to choose your sweep mode

Main Menu Options

You'll be presented with three choices:

Option 1: Sweep TRX

• Automatically collects TRX from all your wallets
• Runs continuously until you stop it

Option 2: Sweep TRC-20

• Collects specific TRC-20 tokens from your wallets
• You'll need to provide the token contract address
• You can set a minimum balance threshold

Option 3: Quit

• Safely exits the application

Sweep Modes

TRX Sweep Mode

What it does:

• Monitors all wallets for TRX balances
• Automatically transfers TRX to your destination wallet
• Accounts for transaction fees and keeps small amounts for future transactions

How it works:

1. Checks all wallet balances simultaneously
2. Calculates required fees for each transaction
3. Transfers maximum possible amount (balance minus fees)
4. Repeats the process every 60 seconds (configurable)

When to use:

• When you want to collect TRX from multiple wallets
• For regular consolidation of TRX earnings
• When you have wallets receiving TRX payments

TRC-20 Sweep Mode

What it does:

• Collects specific TRC-20 tokens (like USDT, USDC, etc.)
• Handles token approvals automatically
• Funds wallets with TRX when needed for transaction fees

Setup process:

1. Token Contract Address: Enter the contract address of the token you want to collect
   • Example for USDT: TR7NHqjeKQxGTCi8q8ZY4pL8otSzgjLj6t
   • You can find contract addresses on TRONSCAN.org
2. Minimum Balance Threshold: Set the minimum token amount required to trigger a sweep
   • Example: Enter 5 to only sweep wallets with 5+ tokens
   • Helps avoid unnecessary transactions for small amounts

How it works:

1. Checks all wallets for token balances above your threshold
2. For wallets with insufficient TRX for fees, automatically funds them
3. Approves your destination wallet to spend tokens (one-time setup per wallet)
4. Transfers all tokens to your destination wallet
5. Collects any leftover TRX from funded wallets
6. Repeats the process every 60 seconds

When to use:

• When collecting specific TRC-20 tokens
• For automated token consolidation
• When managing multiple wallets receiving token payments

Understanding Output

Real-Time Status Display

Status Indicators:

• Monitoring: Number of wallets being watched
• Uptime: How long the current session has been running
• Collected: Total amount collected in current session
• Success TXs: Number of successful transactions
• Failed TXs: Number of failed transactions

Log Messages

BTAS PRO creates a sweep.log file with detailed information:

Successful Transaction:

[2024-01-15T14:30:45.123Z] TX SUCCESS from TQn9Y2khEsLJW1ChVWFMSMeRDow5KcbLSE | 5.234567 TRX | TXID: abc123...

Token Transfer:

[2024-01-15T14:31:12.456Z] TOKEN TRANSFER SUCCESS from TQn9Y2khEsLJW1ChVWFMSMeRDow5KcbLSE | 100.50 USDT | TXID: def456...

Wallet Funding:

[2024-01-15T14:31:30.789Z] FUNDED TQn9Y2khEsLJW1ChVWFMSMeRDow5KcbLSE with 2.5 TRX | TXID: ghi789...

Stopping the Application

1. Press Ctrl+C (Windows/Linux) or Cmd+C (Mac)
2. The application will finish current operations and exit cleanly
3. You'll return to the main menu where you can choose a different mode or quit

Troubleshooting

Common Issues and Solutions

Problem: "Error loading wallets.txt"

• Solution: Make sure wallets.txt exists in the BTAS PRO folder
• Check that each line contains a valid 64-character private key
• Ensure there are no empty lines or extra spaces

Problem: "Insufficient TRX balance"

• Solution: Your destination wallet needs TRX to pay for transaction fees
• Add more TRX to your destination wallet
• For TRC-20 sweeping, the tool automatically funds wallets but needs TRX in the destination

Problem: "Invalid contract address"

• Solution: Double-check the TRC-20 token contract address
• Verify the address on TRONSCAN.org
• Make sure you're using the correct network (TESTNET vs MAINNET)

Problem: "Connection timeout" or "503 errors"

• Solution: This usually indicates network issues or API rate limiting
• Wait a few minutes and try again
• Check your internet connection
• Consider getting a personal API key from TronGrid

Problem: "Transaction failed" messages

• Solution: This can happen due to:
• Insufficient balance for fees
• Network congestion
• Invalid wallet addresses
• Check the log file for specific error details

Network-Specific Issues

TESTNET Issues:

• TESTNET can be unstable and slower than MAINNET
• Some features might not work exactly like MAINNET
• Use TESTNET only for learning and testing

MAINNET Issues:

• Ensure you have real TRX for transaction fees
• Double-check all addresses before running
• Start with small amounts to test your setup

Getting Support

1. Check the sweep.log file for detailed error messages
2. Verify your .env configuration
3. Test with a small number of wallets first
4. Contact support with specific error messages and log details

Best Practices

Security Recommendations

• Private Key Safety:
• Never share your private keys with anyone
• Keep backups of your wallets.txt and .env files in secure locations
• Use strong passwords for any encrypted storage
• Consider using hardware wallets for large amounts
• Testing First:
• Always test with TESTNET before using MAINNET
• Start with a small number of wallets to verify everything works
• Test with small amounts before processing larger sums

Operational Tips

• Wallet Management:
• Keep your destination wallet funded with sufficient TRX
• Monitor the application regularly, especially during initial runs
• Check the log file periodically for any issues
• Performance Optimization:
• BTAS PRO uses chunked balance checks to reduce RPC load (throughput depends on your RPC provider, rate limits, and machine)
• Start with a small wallet set, verify stability, then scale up while monitoring logs and RPC limits
• Adjust RATE_LIMIT_MS in the .env file if you encounter RPC rate limits or 503 errors
• Use a stable internet connection to ensure consistent sweep cycles
• Monitoring:
• Keep the application window visible to monitor real-time status
• Check sweep.log regularly for detailed transaction history
• Set up alerts if you need to monitor remotely

Maintenance

• Regular Tasks:
• Update Node.js when new LTS versions are released
• Keep your API key active (if using a personal one)
• Backup your configuration files regularly
• Monitor your destination wallet balance
• Troubleshooting Preparation:
• Keep a record of your configuration settings
• Document any custom modifications you make
• Maintain contact information for support if needed

Legal and Compliance

• Important Reminders:
• Ensure you have legal ownership of all wallets you're sweeping
• Comply with local regulations regarding cryptocurrency transactions
• Keep records of all transactions for tax purposes
• Use the tool responsibly and ethically

Conclusion

BTAS PRO is a powerful tool for automating TRX and TRC-20 token collection across multiple wallets. By following this guide, you should be able to set up and run the application successfully.

Remember to:

• Start with TESTNET for learning
• Keep your private keys secure
• Monitor the application during operation
• Check logs regularly for any issues

For additional support or questions, refer to the contact information below.

Support

If you encounter any issues while using BTAS PRO, or have questions about functionality, feel free to reach out directly.

📬 Contact

• Email: [email protected]
• Telegram (faster response): @Thisiswhosthis

🌐 Developer Info

• Website: web3dev.ma
• GitHub: github.com/ELHARAKA

💡 Please provide details such as your OS, Node version, and any logs/screenshots that might help reproduce the issue.

Happy sweeping! 🚀