| OPEN Photos / Open / Accelerators | OPEN-PHO-ACCEL-2025-030 |
|
Curing of magnet coils of MQXFB coils for HL-LHC
|
|
|---|---|
|
In the manufacture of MQXFB magnets for the HL-LHC one stage is curing, which involves the application of a ceramic binder, holding the coils in their positions. It is done after the winding of the coil inner layer. Later on, the outer layer will be wound on top and curing will take place: the same pressure and temperature cycle will be done, but the ceramic binder will not be applied in the coil turns. After curing the outer layer, the coil is carefully manoeuvred to place it in the reaction fixtures
|
|
|
Total images: 27
|
|
Record created 2025-10-22, last modified 2025-10-27