Mako - Logo
Advertising
- 82 views
- 1 like
- 0 comments
| Publication date | 2023-04-23 at 22:04 |
|---|
Maker
3D Model
:format(webp)/https://fbi.cults3d.com/uploaders/27946695/illustration-file/5769cb0c-6faa-49d8-ab5c-557f27bf52ee/Mako_Flat_2.jpg)
Advertising
Makeโs description
I attached magnet tape on the backside to use as a magnet.
CURA Slicer
PLA - 1.75
Layer Height - 0.12
Wall Thickness - 1.2
Infill Density :20%.
Printing Temperature - 210
Build Plate Temperature - 60
3D Printer
Artillery HornetFilament
HATCHBOX 1.75mm PLA- Raft: No
- Resolution: 0.12 mm
- Temperature: 210 โ
- Support: No
- Infill: 20 %
- Speed: 60 mm/s
You have a problem with this Make?
Report a problem.
Add a comment