Tape, ribbon organizer and storage wall mount - Red / Complete Set / Large

This tape roll organizer is super easy to set up. You don't need a pegboard for it, use the included hardware to mount this system anywhere. These 3D printed brackets make it easy to organize your space and created a nice shelving system for all your tapes, ribbons and rolls. These hooks are 3D Printed in PETG and are custom made to order, we usually ship within 1-3 days of receiving an order. What's included (Large Set): 3/8" x 12" long wood dowels (3) are included with the each Complete Set 3D printed brackets (2 for each Complete Set) Mounting hardware (drywall anchors and screws, 1 pair for each Completer Set) Hole pattern for 11-3/8" spacing Ideal for rolls up to 5in diameter What's included (Extra Large Set): 3/8" x 12" long wood dowels (4) are included with the each Complete Set 3D printed brackets (2 for each Complete Set) Mounting hardware (drywall anchors and screws, 1 pair for each Completer Set) Hole pattern for 11-3/8" spacing Ideal for rolls of 5in-8in diameter What's included (Bundle of Hooks): 3D printed brackets (10) Mounting hardware (drywall anchors and screws, 10 sets) Hole pattern for 11-3/8" spacing To extend beyond 12in, order an additional bracket (we recommend using one bracket every 12in of dowel length). See the options for purchasing bundles of 10 brackets (rods are not included but you can purchase those at Home Depot or Lowe's, Menards, 3/8in diameter)