default search action
WSC 2002: San Diego, California, USA
- Jane L. Snowdon, John M. Charnes:
Proceedings of the 34th Winter Simulation Conference: Exploring New Frontiers, San Diego, California, USA, December 8-11, 2002. WSC 2002, ISBN 0-7803-7615-3
Keynote address
- Paul L. Graziani:
Addressing the challenges of aerospace and defense initiatives using software analysis tools. 3-4
Introductory tutorials
- Ricki G. Ingalls:
Introduction to simulation: introduction to simulation. 7-16 - Andrew F. Seila:
Spreadsheet simulation: spreadsheet simulation. 17-22 - Marvin K. Nakayama:
Output analysis: simulation output analysis. 23-34 - Bahar Biller, Barry L. Nelson:
Input modeling: answers to the top ten input modeling questions. 35-40 - Averill M. Law, Michael G. McComas:
Simulation optimization: simulation-based optimization. 41-44 - Russell R. Barton:
Simulation experiments: designing simulation experiments. 45-51 - John S. Carson II:
Verification validation: model verification and validation. 52-58 - Leonardo Chwif, Marcos Ribeiro Pereira Barretto, Eduardo Saliby:
Supply chain analysis: supply chain analysis: spreadsheet or simulation? 59-66 - Tamrat W. Tewoldeberhan, Alexander Verbraeck, Edwin Valentin, Gilles Bardonnet:
Software evaluation and selection: an evaluation and selection methodology for discrete-event simulation software. 67-75
Advanced tutorials
- Sigurdur Ólafsson, Jumi Kim:
Simulation optimization: simulation optimization. 79-84 - Christos Alexopoulos, Seong-Hee Kim
:
Statistical analysis of simulation output: output data analysis for simulations. 85-96 - Thomas J. Schriber, Daniel T. Brunner:
Inside simulation software: how it works and why it matters: inside discrete-event simulation software: how it works and why it matters. 97-107 - Minghua Hsieh:
Adaptive monte carlo methods for rare event simulation: adaptive monte carlo methods for rare event simulations. 108-115 - Susan M. Sanchez, Thomas W. Lucas:
Exploring the world of agent-based simulations: simple models, complex analyses: exploring the world of agent-based simulations: simple models, complex analyses. 116-126 - Scott M. Preddy, Richard E. Nance:
Key requirements for cave simulations: key requirements for cave simulations. 127-135 - Thomas N. Herzog:
Bayesian statistics and the monte carlo method: bayesian statistics and the monte carlo method. 136-146 - John R. Clymer:
Simulation-based engineering of complex systems: simulation-based engineering of complex systems using EXTEND+MFG+OpeMCSS. 147-156 - John Keller:
Human performance modeling for discrete-event simulation: human performance modeling for discrete-event simulation: workload. 157-162
Software/modelware tutorials a
- Judy Rathmell, David T. Sturrock:
Arena: the arena product family: enterprise modeling solutions. 165-172 - Matthew W. Rohrer, Ian McGregor:
AutoMod: simulating reality using AutoMod. 173-181 - Richard A. Phelps, David J. Parsons, Andrew J. Siprelle:
Non-item based tools: non-item based discrete-event simulation tools. 182-186 - Daniel W. Schunk, Wendy K. Bloechle, K. Ronald Laughery Jr.:
Micro Saint: Micro Saint modeling and the human element. 187-191 - Charles R. Harrell, Rochelle N. Price:
Promodel: simulation modeling using promodel technology. 192-198 - Averill M. Law, Michael G. McComas:
ExpertFit: how the ExpertFit distribution-fitting software can make your simulation models more valid. 199-204 - David Krahl:
Extend: the Extend simulation environment. 205-213 - Osman Balci, Robin J. Adams, David S. Myers, Richard E. Nance:
Credibility assessment: a collaborative evaluation environment for credibility assessment of modeling and simulation applications. 214-220 - Jean J. O'Reilly:
AweSim: introduction to AweSim. 221-224
Software/modelware tutorials b
- Richard A. Kilgore:
Silk: object-oriented simulation with Java, Silk, and open SML .NET languages. 227-233 - Pierre L'Ecuyer, Lakhdar Meliani, Jean G. Vaucher:
SSJ: SSJ: a framework for stochastic simulation in Java. 234-242 - Arnold H. Buss:
Simkit: component based simulation modeling with Simkit. 243-249 - William B. Nordgren:
Flexsim: Flexsim simulation environment. 250-252
Analysis methodology
- Bahar Biller, Barry L. Nelson:
Advanced input modeling: parameter estimation for ARTA processes. 255-262 - Soumyadip Ghosh, Shane G. Henderson:
Advanced input modeling: properties of the NORTA method in higher dimensions. 263-269 - Dorota Kurowicka, Roger M. Cooke:
Advanced input modeling: the vine copula method for representing high dimensional dependent distributions: application to continuous belief nets. 270-278 - Jumi Kim, Sigurdur Ólafsson:
Optimization via simulation: two-stage NP method with inheritance. 279-284 - Xiaoping Xiong, I-Jeng Wang, Michael C. Fu:
Optimization via simulation: randomized-direction stochastic approximation algorithms using deterministic sequences. 285-291 - Juta Pichitlamken, Barry L. Nelson:
Optimization via simulation: a combined procedure for optimization via simulation. 292-300 - Pieter-Tjerk de Boer, Dirk P. Kroese, Reuven Y. Rubinstein:
Rare event simulation and combinatorial optimization using cross entropy: estimating buffer overflows in three stages using cross-entropy. 301-309 - Tito Homem-de-Mello
Rare event simulation and combinatorial optimization using cross entropy: estimation of rare event probabilities using cross-entropy. 310-319 - Jonathan M. Keith, Dirk P. Kroese:
Rare event simulation and combinatorial optimization using cross entropy: sequence alignment by rare event simulation. 320-327 - James M. Calvin, Marvin K. Nakayama:
Output analysis: a comparison of output-analysis methods for simulations of processes with multiple regeneration sequences. 328-335 - Natalie M. Steiger, Christos Alexopoulos, David Goldsman, Emily K. Lada, James R. Wilson, Faker Zouaoui:
Output analysis: ASAP2: an improved batch means procedure for simulation output analysis. 336-344 - Bruce W. Schmeiser, Yingchieh Yeh:
Output analysis: on choosing a single criterion for confidence-interval procedures. 345-352 - Russell R. Barton, Stephen E. Chick, Russell C. H. Cheng, Shane G. Henderson, Averill M. Law, Bruce W. Schmeiser, Lawrence M. Leemis, Lee Schruben, James R. Wilson:
Panel discussion on current issues in input modeling: panel on current issues in simulation input modeling. 353-369 - Minghua Hsieh, Peter W. Glynn:
Recent advances in simulation optimization: confidence regions for stochastic approximation algorithms. 370-376 - Ebru Angün, Jack P. C. Kleijnen, Dick den Hertog, Gül Gürkan:
Recent advances in simulation optimization: response surface methodology revisited. 377-383 - E. Jack Chen:
Recent advances in simulation optimization: a conservative adjustment to the ETSS procedure. 384-391 - Michael Freimer, Lee Schruben:
Simulation input analysis: collecting data and estimating parameters for input distributions. 393-399 - Stephen E. Chick, Szu Hui Ng:
Simulation input analysis: joint criterion for factor identification and parameter estimation. 400-406 - Donald Gross, John Shortle, Martin J. Fischer, Denise M. Bevilacqua Masi:
Simulation input analysis: difficulties in simulating queues with Pareto service. 407-415 - Roberto Szechtman, Peter W. Glynn:
Difficult queuing simulation problems: rare-event simulation for infinite server queues. 416-423 - Bruce Shultes:
Difficult queuing simulation problems: a balanced likelihood ratio approach for analyzing rare events in a tandem Jackson network. 424-432 - John C. Sees Jr., John Shortle:
Difficult queuing simulation problems: simulating M/G/1 queues with heavy-tailed service. 433-438 - Stewart Robinson:
New simulation output analysis techniques: a statistical process control approach for estimating the warm-up period. 439-446 - E. Jack Chen:
New simulation output analysis techniques: two-phase quantile estimation. 447-455 - Andrés Suárez-González, José C. López-Ardao, Cándido López-García, Miguel Rodríguez-Pérez
New simulation output analysis techniques: a batch means procedure for mean value estimation of processes exhibiting long range dependence. 456-464
Modeling methodology a
- Darren T. Drewry, Paul F. Reynolds Jr., William R. Emanuel:
Optimization and response surfaces: an optimization-based multi-resolution simulation methodology. 467-475 - Paul J. Stewart, Peter J. Fleming, Sheena A. MacKenzie:
Optimization and response surfaces: on the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. 476-482 - Miyoung Shin, Robert G. Sargent, Amrit L. Goel:
Optimization and response surfaces: Gaussian radial basis functions for simulation metamodeling. 483-488 - Helen D. Karatza, Ralph C. Hilzer Jr.:
Parallel and distributed systems: load sharing in heterogeneous distributed systems. 489-496 - Sabri Pllana, Thomas Fahringer:
Parallel and distributed systems: UML based modeling of performance oriented parallel and distributed applications. 497-505 - Xiao Xu, Yi-Chiun Chen, Hua Xu, Eren Gonen, Peijuan Liu:
Parallel and distributed systems: simulation analysis of RLC timers in UMTS systems. 506-512 - Tony Waller, John Ladbrook:
Virtual worlds: experiencing virtual factories of the future. 513-517 - Lee A. Belfore II, Sudheer Battula:
Virtual worlds: VRML clients linked through concurrent chat. 518-524 - Farhad Azadivar, Tu Hoang Truong, Kevin D. E. Stokesbury, Brian J. Rothschild:
Virtual worlds: simulation based optimization in fishery management. 525-531 - Jennifer Kreke, Andrew J. Schaefer, Derek C. Angus, Cindy L. Bryce, Mark S. Roberts:
Methods for special applications: incorporating biology into discrete event simulation models of organ allocation. 532-536 - Michael Norman:
Methods for special applications: a recursive method for traffic management through a complex path network. 537-541 - Alexandre Muzy, Eric Innocenti, Antoine Aïello, Jean François Santucci, Gabriel A. Wainer
Methods for special applications: Cell-DEVS quantization techniques in a fire spreading application. 542-549 - Sid Redman, Sarah Law:
Practice: an examination of implementation in extend, arena, and silk. 550-556 - Bruce Gunn, Saeid Nahavandi:
Practice: why initial conditions are important. 557-562 - Edwin Valentin, Alexander Verbraeck:
Practice: guidelines for designing simulation building blocks. 563-571 - Ingolf Ståhl:
Extensions: simulation prototyping. 572-579 - Lei Wei, Honghui Qi:
Extensions: an efficient importance sampling method for rare event simulation in large scale tandem networks. 580-587 - Ezequiel Glinsky, Gabriel A. Wainer
Extensions: performance analysis of real-time DEVS models. 588-594
Modeling methodology b
- Hans Vangheluwe, Juan de Lara:
XML-based modeling and simulation: meta-models are models too. 597-605 - Senthilanand Chandrasekaran, Gregory A. Silver, John A. Miller
XML-based modeling and simulation: web service technologies and their synergy with simulation. 606-615 - Paul A. Fishwick:
XML-based modeling and simulation: using XML for simulation modeling. 616-622 - Thomas Wiedemann:
Open source initiatives for simulation software: next generation simulation environments founded on open source software and XML-based standard interfaces. 623-628 - Richard A. Kilgore:
Open source initiatives for simulation software: multi-language, open-source modeling using the microsoft .NET architecture. 629-633 - Thorsten Daum, Robert G. Sargent:
Open source initiatives for simulation software: a web-ready HiMASS: facilitating collaborative, reusable, and distributed modeling and execution of simulation models with XML. 634-640 - C. Michael Overstreet:
Improving the model development process: model testing: is it only a special case of software testing? 641-647 - Ray J. Paul, Simon J. E. Taylor:
Improving the model development process: what use is model reuse: is there a crook at the end of the rainbow? 648-652 - Osman Balci, Richard E. Nance, James D. Arthur, William F. Ormsby:
Improving the model development process: expanding our horizons in verification, validation, and accreditation research and practice. 653-663 - George F. Riley:
Network modeling and simulation: on standardized network topologies for network research. 664-670 - Nathan Smith, Trefor J. Delve:
Network modeling and simulation: a motion environment for wireless communications systems simulations. 671-678 - L. Felipe Perrone
Network modeling and simulation: a scalable simulator for TinyOS applications. 679-687 - Agostino G. Bruzzone, Simon J. E. Taylor
Panel discussion on distributed simulation and industry: potentials and pitfalls: distributed simulation and industry: potentials and pitfalls. 688-694 - Thomas Schulze, Andreas Wytzisk, Ingo Simonis, Ulrich Raape:
Parallel and Distributed Simulation: distributed spatio-temporal modeling and simulation. 695-703 - Malcolm Yoke Hean Low:
Managing external workload with BSP time warp. 704-711 - Xiao Zhonge, Rob Simmonds, Brian W. Unger, John G. Cleary:
Parallel and distributed simulation: fast cell level ATM network simulation. 712-719 - Rohyt V. Belani, Saumitra M. Das, David A. Fisher:
Modeling very large scale systems: one-to-one modeling and simulation of unbounded systems: experiences and lessons. 720-724 - Maged M. Dessouky, Quan Lu, Robert C. Leachman:
Modeling very large scale systems: using simulation modeling to assess rail track infrastructure in densely trafficked metropolitan areas. 725-731 - Arnold H. Buss, Paul J. Sanchez:
Modeling very large scale systems: building complex models with LEGOs (Listener Event Graph Objects). 732-737 - Frank Boydstun, Mike Graul, Perakath C. Benjamin, Michael K. Painter:
Methods and tools for aerospace operations modeling and simulation: new perspectives towards modeling depot MRO. 738-746 - Martin J. Steele, Mansooreh Mollaghasemi, Ghaith Rabadi, Grant R. Cates:
Methods and tools for aerospace operations modeling and simulation: generic simulation models of reusable launch vehicles. 747-753 - Grant R. Cates, Martin J. Steele, Mansooreh Mollaghasemi, Ghaith Rabadi:
Methods and tools for aerospace operations modeling and simulation: modeling the space shuttle. 754-762 - Perakath C. Benjamin, Mike Graul, Madhav Erraguntla:
Methods and tools for aerospace operations modeling and simulation: Toolkit for Enabling Adaptive Modeling and Simulation (TEAMS). 763-771 - Michael Pidd:
Reusing simulation components: simulation software and model reuse: a polemic. 772-775 - Gilbert Chen, Boleslaw K. Szymanski
Reusing simulation components: cost: a component-oriented discrete event simulator. 776-782 - Glenn P. Rioux, Richard E. Nance:
Reusing simulation components: generalizing: is it possible to create all-purpose simulations? 783-790
Web-based simulation
- Peter H. M. Jacobs, Niels A. Lang, Alexander Verbraeck
Web-based simulation 1: D-SOL; a distributed Java based discrete event simulation architecture. 793-800 - Hideyuki Mizuta, Yoshiki Yamagata:
Web-based simulation 1: transaction cycle of agents and web-based gaming simulation for international emissions trading. 801-806 - James O. Henriksen, André Hanisch, Stefan Osterburg, Peter Lorenz, Thomas J. Schriber:
Web-based simulation 1: web based simulation center: professional support for simulation projects. 807-815 - Dhananjai Madhava Rao, Philip A. Wilsey:
Web-based simulation 2: performance prediction of dynamic component substitutions. 816-824 - Tom-David Graupner, Hendrik Richter, Wilfried Sihn:
Web-based simulation 2: configuration, simulation and animation of manufacturing systems via the internet. 825-831 - G. Ayorkor Mills-Tettey, Greg Johnston, Linda F. Wilson, Joseph M. Kimpel, Bin Xie:
Web-based simulation 2: the ABELS system: designing an adaptable interface for linking simulations. 832-840 - Richard A. Kilgore:
Web-based simulation 3: simulation web services with .Net technologies. 841-846 - Steven W. Reichenthal:
Web-based simulation 3: re-introducing web-based simulation. 847-852
Military applications
- Kenneth Mark Bryden:
Military keynote: military-based virtual systems engineering. 855-858 - John Herington, Andrew Lane, Noel Corrigan, John A. Golightly:
Campaign analysis: representation of historical events in a military campaign simulation model. 859-863 - James W. Harris Jr.:
Campaign analysis: the sortie generation rate model. 864-868 - Steven J. Rasmussen, Phillip R. Chandler:
Unmanned aerial vehicles: MultiUAV: a multiple UAV simulation for investigation of cooperative control. 869-877 - David R. Jacques:
Unmanned aerial vehicles: modeling considerations for wide area search munition effectiveness analysis. 878-886 - Shane Dougherty, Raymond R. Hill, James T. Moore:
Unmanned aerial vehicles: modeling signal latency effects using arena? 887-892 - Sean Connors, Julie Gauldin, Marshall Smith:
Logistics 1: closed-loop, simulation-based, systems engineering approach to life cycle management of defense systems. 893-900 - David Goldsman, Sébastien Pernet, Keebom Kang:
Logistics 1: simulation of transportation logistics. 901-904 - Keebom Kang, Kenneth H. Doerr, Kyle A. Bryan, Gregorio Ameyugo:
Logistics 1: an analysis of STOM (Ship To Objective Maneuver) in sea based logistics. 905-910 - Gregory H. Graves, Jeffrey L. Higgins:
Logistics 2: applications of simulation in logistics combat developments. 911-916 - Ihsan Sabuncuoglu, Durdu Hakan Utku
Logistics 2: evaluation of army corps artillery ammunition supply systems via simulation. 917-920 - Todd S. Bertulis, John O. Miller:
Logistics 2: using simulation to understand Interim Brigade Combat Team (IBCT) munitions logistics. 921-927 - Gary W. King, Brent Heeringa, David L. Westbrook, Joe Catalano, Paul R. Cohen:
Agent modeling: models of defeat. 928-934 - Jeffrey R. Cares:
Agent modeling: the use of agent-based models in military concept development. 935-939 - Mark Whelan, John Loftus, David Perme, Richard Baldwin:
Agent modeling: reducing training costs through integration of simulations, C4I systems, and expert systems. 940-947 - Ricky Valentin, Jeremy Cunningham, Michael D. Osterman, Abhijit Dasgupta, Michael G. Pecht, Dinos Tsagos:
Weapon and communication systems: virtual life assessment of electronic hardware used in the Advanced Amphibious Assault Vehicle (AAAV). 948-953 - William S. Murphy Jr., Mark A. Flournoy:
Weapon and communication systems: simulating crisis communications. 954-959 - Fernando Maymi, John R. Surdu, Andrew Hall, Ryan Beltramini:
Weapon and communication systems: modeling the wireless network architecture of land warrior. 960-966 - Dominik Nogic, Michael Nowatkowski
Plebes, dogs, and robots: simulation analysis of the United States military academy reception day. 967-974 - Dean S. Hartley III:
Plebes, dogs, and robots: simulating without data. 975-980 - Eric J. Gottlieb, Michael J. McDonald, Fred J. Oppel, J. Brian Rigdon, Patrick G. Xavier:
Plebes, dogs, and robots: the Umbra simulation framework as applied to building HLA federates. 981-989
Manufacturing applications
- K. Preston White, Ryan Fritz, Stephen Horvath, Carlos Orellana II, Jonathan Wohlers, Richard G. Fairbrother, William S. Terry:
Manufacturing modeling architectures: architectural concepts for a system simulator for concurrent prototypng of equipment and controls. 117-122 - Jeffrey S. Smith, Yali Li, Jason Gjesvold:
Manufacturing 1: simulation-based analysis of a complex printed circuit board testing process. 993-998 - Johnell Gonzales-Lujan, Robert J. Burnside, George Tompkins:
Manufacturing 1: a simulation study of high power detonator production transition. 999-1006 - Prasad V. Saraph:
Manufacturing 1: capacity analysis of multi-product, multi-resource biotech facility using discrete event simulation. 1007-1012 - Daniel A. Finke, Deborah J. Medeiros, Mark T. Traband:
Manufacturing 2: shop scheduling using Tabu search and simulation. 1013-1017 - Carl R. Williams, Peraset Chompuming:
Manufacturing 2: a simulation study of robotic welding system with parallel and serial processes in the metal fabrication industry. 1018-1025 - Shabnam Tauböck, Christian Wartha, Michael Steiner, Gerhard Pirkner, Felix Breitenecker:
Manufacturing 2: creation of a self adaptive simulation for Radex Heraklit industries. 1026-1029 - Vishvas Patel, James Ashby, John Ma:
Manufacturing 3: discrete event simulation in automotive final process system. 1030-1034 - Sang D. Choi, Anil R. Kumar, Abdolazim Houshyar:
Manufacturing 3: a simulation study of an automotive foundry plant manufacturing engine blocks. 1035-1040 - Roberto F. Lu, Shankar Sundaram:
Manufacturing 3: manufacturing process modeling of Boeing 747 moving line concepts. 1041-1045 - Daniel J. Muller, Sarah M. Cardinal, Juergen Baumbach:
Transportation and material handling: complexities of AGV modelling in newspaper roll delivery system. 1046-1051 - Kambiz Farahmand, Arun Balasubramanian:
Transportation and material handling: solving logistics and transportation problems in a job shop. 1052-1059 - Wolfgang Müller-Wittig, Reginald C. Jegathese, Meehae Song, Jochen Manfred Quick, Haibin Wang, Yongmin Zhong:
Best modeling methods: virtual factory: highly interactive visualisation for manufacturing. 1061-1064 - Björn Johansson
Best modeling methods: turn lost production into profit - discrete event simulation applied on resetting performance in manufacturing systems. 1065-1072 - Jan Oscarsson, Matías Urenda Moris:
Best modeling methods: documentation of discrete event simulation models for manufacturing system life cycle simulation. 1073-1078 - Christoph Roser, Masaru Nakano, Minoru Tanaka:
Productivity improvement: shifting bottleneck detection. 1079-1086 - Christoph Roser, Masaru Nakano, Minoru Tanaka:
Productivity improvement: throughput sensitivity analysis using a single simulation. 1087-1094 - Felipe F. Baesler, Milton Moraga, Francisco J. Ramis:
Productivity improvement: productivity improvement in the wood industry using simulation and artificial intelligence. 1095-1098 - Hironori Hibino, Yoshiyuki Yura, Yoshiro Fukuda, Keiji Mitsuyuki, Kiyoshi Kaneda:
Manufacturing modeling architectures: manufacturing adapter of distributed simulation systems using HLA. 1099-1107 - Charles R. McLean, Albert T. Jones, Y. Tina Lee, Frank Riddick:
Manufacturing modeling architectures: an architecture for a generic data-driven machine shop simulator. 1108-1116 - Silvanus T. Enns, Sangjin Choi:
Manufacturing modeling methods: USE of GI/G/1 queuing approximations to set tactical parameters for the simulation of MRP systems. 1123-1129 - Deogratias Kibira, Chuck McLean:
Manufacturing modeling methods: virtual reality simulation of a mechanical assembly production line. 1130-1137 - Edward J. Williams
Manufacturing modeling methods: an approach and interface for building generic manufacturing kanban-systems models. 1138-1141 - Paul Rogers:
Simulation of manufacturing operations: optimum-seeking simulation in the design and control of manufacturing systems: experience with optquest for arena. 1142-1150 - Jai Thomas, Jayesh Todi, Asif Paranjpe:
Simulation of manufacturing operations: optimization of operations in a steel wire manufacturing company. 1151-1156 - Fulya Altiparmak
Simulation of manufacturing operations: optimization of buffer sizes in assembly systems using intelligent techniques. 1157-1162
Applications in logistics, transportation, and distribution
- Sanjay Jain, Ngai Fong Choong, William G. K. Lee:
Manufacturing supply chain applications: modeling computer assembly operations for supply chain integration. 1165-1173 - Agostino G. Bruzzone, Alessandra Orsoni, Roberto Mosca
Manufacturing supply chain applications: ai-based optimization for fleet management in maritime logistics. 1174-1182 - Jayendran Venkateswaran, Young-Jun Son, Boonserm Kulvatunyou:
Manufacturing supply chain applications: investigation of influence of modeling fidelities on supply chain dynamics. 1183-1191 - Suna Hafizogullari, Prathi Chinnusamy, Cenk Tunasar:
Transportation applications of simulation: simulation reduces airline misconnections: a case study. 1192-1198 - Alexander Verbraeck, Edwin Valentin:
Transportation applications of simulation: simulation building blocks for airport terminal modeling. 1199-1206 - Mark B. Duinkerken, Jaap A. Ottjes, Gabriël Lodewijks:
Transportation applications of simulation: the application of distributed simulation in TOMAS: redesigning a complex transportation model. 1207-1213 - Oscar Franzese, Shirish S. Joshi:
Transportation applications of simulation: traffic simulation application to plan real-time distribution routes. 1214-1218 - David Carnes, Frederick Wieland:
Advanced aviation concepts via simulation: techniques to enhance performance of an existing aviation simulation. 1219-1225 - Mario S. V. Valenti Clari, Rob C. J. Ruigrok, Bart W. M. Heesbeen, Jaap Groeneweg:
Advanced aviation concepts via simulation: research flight simulation of future autonomous aircraft operations. 1226-1234 - Massoud Bazargan, Kenneth Fleming, Subramanian Prakash:
Advanced aviation concepts via simulation: a simulation study to investigate runway capacity using TAAM. 1235-1243 - Lisa A. Schaefer, Leonard A. Wojcik, Thomas P. Berry, Craig R. Wanke:
Advanced aviation concepts via simulation: decision support for advanced aviation concepts. 1244-1250 - Soundar R. T. Kumara, Yong-Han Lee, Kaizhi Tang, Chad Dodd, Jeffrey D. Tew, Shang-Tae Yee:
Simulation applications in the automotive industry: simulation anywhere any time: web-based simulation implementation for evaluating order-to-delivery systems and processes. 1251-1259 - Shang-Tae Yee:
Simulation applications in the automotive industry: establishment of product offering and production leveling principles via supply chain simulation under order-to-delivery environment. 1260-1268 - Arvind Mane, Saeid Nahavandi, Jingxin Zhang:
Simulation applications in the automotive industry: sequencing production on an assembly line using goal chasing and user defined algorithm. 1269-1273 - Joseph G. Macro, Reino E. Salmi:
Warehousing and inventory management: a simulation tool to determine warehouse efficiencies and storage allocations. 1274-1281 - Eduardo Saggioro Garcia, Caio Fiuza Silva, Eduardo Saliby:
Warehousing and inventory management: a simulation model to validate and evaluate the adequacy of an analytical expression for proper safety stock sizing. 1282-1288 - Luis Rene Contreras, Chirag Modi, Arunkumar Pennathur:
Warehousing and inventory management: integrating simulation modeling and equipment condition diagnostics for predictive maintenance strategies -a case study. 1289-1296 - Christian Wartha, Momtchil Peev, Andrei Borshchev, Alexei Filippov:
Manufacturing supply chain applications 1: decision support tool - supply chain. 1297-1301 - Edward G. Anderson Jr., Douglas J. Morrice:
Maufacturing supply chain applications 1: capacity and backlog management in queuing-based supply chains. 1302-1305 - Jeffrey A. Joines
Maufacturing supply chain applications 1: supply chain multi-objective simulation optimization. 1306-1314 - Steven C. Hamoen, Dirk-Jan Moens:
Manufacturing supply chain applications 2: logistic simulator for steel producing factories. 1315-1318 - Richard J. Linn, Chin-Sheng Chen, Jorge A. Lozan:
Manufacturing supply chain applications 2: development of distributed simulation model for the transporter entity in a supply chain process. 1319-1326 - Brett Marc Duarte, John W. Fowler, Kraig Knutson, Esma Senturk Gel
Manufacturing supply chain applications 2: parameterization of fast and accurate simulations for complex supply networks. 1327-1336 - Mark J. R. Ebben, Luitzen de Boer, Corina E. PopSitar:
Manufacturing supply chain applications 3: multi-agent simulation of purchasing activities in organizations. 1337-1344 - Dieter Armbruster, Daniel E. Marthaler, Christian A. Ringhofer:
Manufacturing supply chain applications 3: efficient simulations of supply chains. 1345-1348 - Gloria J. Giacaman, Rodrigo P. Medel, Jorge A. Tabilo
Manufacturing supply chain applications 3: simulation of the material transporting and loading process in Pedro de Valdivia mine. 1349-1355
Semiconductor manufacturing
- Robert Wright II, Marlin Shopbell, Kristin Rust, Silpa Sigireddy:
Wafer fabrication: effects of metrology load port buffering in automated 300mm factories. 1359-1364 - Sameer T. Shikalgar, David Fronckowiak, Edward A. MacNair:
Wafer fabrication: 300mm wafer fabrication line simulation model. 1365-1368 - K. J. Stanley, Timothy D. Stanley, José Maia:
Wafer fabrication: realizing 300mm fab productivity improvements through integrated metrology. 1369-1376 - Jesus A. Jimenez, Bosun Kim, John W. Fowler, Gerald T. Mackulak, You In Choung, Dong-Jin Kim:
Material handling: operational modeling and simulation of an inter-bay AMHS in semiconductor wafer fabrication. 1377-1382 - Miki Fukunari, Srinivas Rajanna, Robert J. Gaskins, Mary Ellen Sparrow:
Material handling: data-based node penalties in a path-finding algorithm in an automated material handling system. 1383-1386 - Chad D. DeJong, Scott P. Wu:
Material handling: simulating the transport and scheduling of priority lots in semiconductor factories. 1387-1391 - Lixin Wang, Loo Hay Lee:
Scheduling and dispatching: a simulation study on release, synchronization, and dispatching in MEMS fabrication. 1392-1400 - Oliver Rose:
Scheduling and dispatching: some issues of the critical ratio dispatch rule in semiconductor manufacturing. 1401-1405 - Ilka Habenicht, Lars Mönch:
Scheduling and dispatching: a finite-capacity beam-search-algorithm for production scheduling in semiconductor manufacturing. 1406-1413 - Chanettre Rasmidatta, Shari Murray, John W. Fowler, Gerald T. Mackulak:
Modeling methodology: new approaches for simulation of wafer fabrication: the use of control variates and calibration metrics. 1414-1422 - Chao Qi, Tuck Keat Tang, Appa Iyer Sivakumar:
Modeling methodology: simulation based cause and effect analysis of cycle time and WIP in semiconductor wafer fabrication. 1423-1430 - Manuel Aybar, Kishore Potti, Todd LeBaron:
Modeling methodology: using simulation to understand capacity constraints and improve efficiency on process tools. 1431-1435
Business process reengineering
- David M. Ferrin, David Muthler, Martin J. Miller:
Simulation of customer-focused business processes: Six Sigma and simulation, so what's the correlation? 1439-1443 - Francisco J. Ramis, Jorge L. Palma, Víctor F. Estrada, Gloria Coscolla:
Simulation of customer-focused business processes: a simulator to improve patient's service in a network of clinic laboratories. 1444-1447 - David M. Brann, Beth C. Kulick:
Simulation of customer-focused business processes: simulation of restaurant operations using the restaurant modeling studio. 1448-1453 - Craig V. Robertson, Shelly Shrader, David R. Pendergraft, Lisa M. Johnson, Kenneth S. Silbert:
Simulation of customer-focused business processes: the role of modeling demand in process re-engineering. 1454-1458 - Francisco Pulgar-Vidal:
Making simulation relevant in business: how-to simulation: when knowing what to do is not enough. 1459-1464 - Sambong Kim, Jungyoup Woo, Sungsik Park, Buhwan Jung, Hyunbo Cho:
Making simulation relevant in business: integrated development of nonlinear process planning and simulation-based shop floor control. 1465-1468 - Nico M. van Dijk:
Making simulation relevant in business: to pool or not to pool? "the benefits of combining queuing and simulation". 1469-1472 - Martin J. Miller, Francisco Pulgar-Vidal, David M. Ferrin:
Making simulation relevant in business: achieving higher levels of CMMI maturity using simulation. 1473-1478
Risk analysis
- Jeremy Staum:
Simulation in financial engineering: simulation in financial engineering. 1481-1492 - Athanassios N. Avramidis
Derivatives and credit risk: importance sampling for multimodal functions and application to pricing exotic options. 1493-1501 - Junichi Imai, Ken Seng Tan:
Derivatives and credit risk: enhanced quasi-monte carlo methods with dimension reduction. 1502-1510 - Tarja Joro, Paul Na:
Derivatives and credit risk: credit risk modeling for catastrophic events. 1511-1514 - Mehdi Aboulfadl, Aparna Gupta, Ritesh Pradhan, Shivkumar Kalyanaraman:
Asset price modeling: a spot pricing framework to enable pricing and risk management of inter-domain assured bandwidth services. 1515-1523 - Samuel C. Kou, Steven S. G. Kou
Asset price modeling: modeling growth stocks (part II). 1524-1529 - Suvrajeet Sen, Lihua Yu, Talat Genc:
Asset price modeling: decision aids for scheduling and hedging (DASH) in deregulated electricity markets: a stochastic programming approach to power portfolio optimization. 1530-1538 - Lawrence I. Goldman:
Crystal ball software tutorial: crystal ball professional introductory tutorial. 1539-1545 - Jay April, Fred W. Glover, James P. Kelly:
OptQuest software tutorial: portfolio optimization for capital investment projects. 1546-1554 - Jaksa Cvitanic, Lionel Martellini, Fernando Zapatero:
Problems in financial engineering: optimal active management fees. 1555-1559 - Athanassios N. Avramidis
Problems in financial engineering: convergence of the stochastic mesh estimator for pricing American options. 1560-1567 - Stewart Mayhew:
Problems in financial engineering: security price dynamics and simulation in financial engineering. 1568-1574 - Thomas F. Brady:
Energy production and trading: using computer simulation to mitigate risk in electricity generation/consumption collaboration policies. 1575-1577 - Daniel M. Hamblin, Brian T. Ratchford:
Energy production and trading: batting average: a composite measure of risk for assessing product differentiation in a simulation model. 1578-1587 - Carlos Magno Couto Jacinto:
Energy production and trading: discrete event simulation for the risk of development of an oil field. 1588-1592 - Jian Chen, Michael C. Fu:
Financial derivatives and real options: hedging beyond duration and convexity. 1593-1599 - Harriet Black Nembhard, Leyuan Shi, Mehmet Aktan:
Financial derivatives and real options: effect of implementation time on real options valuation. 1600-1605 - Eduardo Saliby, Flavio Pacheco:
financial derivatives and real options: an empirical evaluation of sampling methods in risk analysis simulation: quasi-monte carlo, descriptive sampling, and Latin Hypercube sampling. 1606-1610
Future of simulation
- Charles R. McLean, Swee Leong:
Simulation standards: a framework for standard modular simulation. 1613-1620 - Osman Balci, Said D. Saadi:
Simulation standards: proposed standard processes for certification of modeling and simulation applications. 1621-1627 - Ralph V. Rogers, Vince Amico, Mark Yerkes:
Simulation standards: the simulation professional certification program: a status report. 1628-1632 - Robert Diamond, James O. Henriksen, Claude Dennis Pegden, Tony Waller, Charles R. Harrell, William B. Nordgren, Matthew W. Rohrer, Averill M. Law:
Future of simulation software: the current and future status of simulation software (panel). 1633-1640 - Wayne J. Davis:
What's virtually possible: what's virtually possible? 1641-1651 - Jerry Banks, Sanjay Jain, Stephen J. Buckley, Peter Lendermann, Mani S. Manivannan:
Supply chain opportunities: panel session: opportunities for simulation in supply chain management. 1652-1658 - Corné Versteegt, Alexander Verbraeck:
Real-time control: the extended use of simulation in evaluating real-time control systems of AGVs and automated material handling systems. 1659-1666 - Sreeram Ramakrishnan, Seungyub Lee, Richard A. Wysk:
Real-time control: implementation of a simulation-based control architecture for supply chain interactions. 1667-1674 - Csaba Attila Boer, Alexander Verbraeck, Hans P. M. Veeke:
Real-time control: the possible role of a backbone architecture in real-time control and emulation. 1675-1682 - Ian McGregor:
Equipment interface: the relationship between simulation and emulation. 1683-1688 - William Rengelink, Yvo A. Saanen:
Equipment interface: improving the quality of controls and reducing costs for on-site adjustments with emulation: an example of emulation in baggage handling. 1689-1694
Construction engineering and project management
- Daniel W. Halpin, Marc Kueckmann:
CEPM 1: lean construction and simulation. 1697-1703 - Simaan M. AbouRizk, Yasser Mohamed:
CEPM 1: optimal construction project planning. 1704-1708 - Bradford J. A. Appleton, John Patra, Yasser Mohamed, Simaan M. AbouRizk:
CEPM 1: special purpose simulation modeling of tower cranes. 1709-1715 - Sgouris P. Sgouridis
CEPM 2: simulation-based analysis of handling inbound containers in a terminal. 1716-1724 - Naren Doshi, Robert Moriyama:
CEPM 1: application of simulation models in airport facility design. 1725-1730 - Ramesh Marasini, Nashwan Dawood:
CEPM 1: simulation modeling and optimization of stockyard layouts for precast concrete products. 1731-1736 - Kenneth D. Walsh, Tobi A. Walsh, James C. Hershauer, Iris D. Tommelein
CEPM 3: lead time reduction via pre-positioning of inventory in an industrial construction supply chain. 1737-1744 - Roberto J. Arbulu, Iris D. Tommelein
CEPM 3: contributors to lead time in construction supply chains: case of pipe supports used in power plants. 1745-1751 - Howard H. Bashford, Anil Sawhney, André Mund, Kenneth D. Walsh:
CEPM 3: process mapping of residential foundation slab construction processes. 1752-1758 - Srinath Devulapalli, Julio C. Martínez, Jesus M. de la Garza:
CEPM 4: evaluation of policies for the maintenance of bridges using discrete-event simulation. 1759-1764 - Vineet R. Kamat
CEPM 4: comparison of simulation-driven construction operations visualization and 4D CAD. 1765-1770 - Mala Chandrakanthi, Patrick Hettiaratchi, Bolívar Prado, Janaka Y. Ruwanpura:
CEPM 4: optimization of the waste management for construction projects using simulation. 1771-1777 - Gary Powers, Janaka Y. Ruwanpura, Garry Dolhan, Martin Chu:
CEPM 5: simulation based project selection decision analysis tool. 1778-1785 - LeRoy F. Simmons:
CEPM 5: project management - critical path method (CPM) and PERT simulated with processmodel. 1786-1788 - Mohamed M. Marzouk, Osama Moselhi:
CEPM 1: selecting earthmoving equipment fleets using genetic algorithms. 1789-1796
Simulation education
- Suzanne Oldenburg DeLong, Paul West:
Advancing learning goals: an undergraduate systems engineering design project for using constructive and virtual simulation for an armed UAV design. 1799-1803 - John H. Reynolds:
Advancing learning goals: Linda arouses a sleeping barber. 1804-1808 - Marvin S. Seppanen, Sameer Kumar:
Advancing learning goals: using simulation to teach business processes design and improvement. 1809-1814 - Matthew Rosenshine, Russell R. Barton, David Goldsman, Lawrence M. Leemis, Barry L. Nelson:
Panel discussion on using simulation to teach probability: words and deeds: panel: using simulation to teach probability, session 1: words, session 2: deeds. 1815-1822
Simulation-based scheduling
- Kenneth J. Musselman, Jean J. O'Reilly, Steven D. Duket:
Supply chain planning: the role of simulation in advanced planning and scheduling. 1825-1830 - Sam Bansal:
Supply chain planning: promise and problems of simulation technology in SCM domain. 1831-1837 - Hank Grant, Scott A. Moses, David Goldsman:
Supply chain planning: using simulation to evaluate buffer adjustment methods in order promising. 1838-1845 - Kishore Potti, Amit K. Gupta II:
Semiconductor manufacturing: ASAP applications of simulation modeling in a wafer fab. 1846-1848 - Chin Soon Chong, Appa Iyer Sivakumar, Robert K. L. Gay:
Semiconductor manufacturing: design, development and application of an object oriented simulation toolkit for real-time semiconductor manufacturing scheduling. 1849-1856 - Juergen Potoradi, Ong Siong Boon, Scott J. Mason, John W. Fowler, Michele E. Pfund:
Semiconductor manufacturing: using simulation-based scheduling to maximize demand fulfillment in a semiconductor assembly facility. 1857-1861 - Amit K. Gupta II, Appa Iyer Sivakumar:
Semiconductor manufacturing: simulation based multiobjective schedule optimization in semiconductor manufacturing. 1862-1870 - Gord Boyer, Neil Arnason:
Maintenance and repair: application of simulation and mean value analysis to a repair facility model for finding optimal staffing levels. 1871-1879 - Terry M. Helm, Steve W. Painter, W. Robert Oakes:
Maintenance and repair: a comparison of three optimization methods for scheduling maintenance of high cost, long-lived capital assets. 1880-1884 - Yiqing Lin, Arthur Hsu, Ravi Rajamani:
Maintenance and repair: a simulation model for field service with condition-based maintenance. 1885-1890 - Kristin A. Thoney, Jeffrey A. Joines
Scheduling & control: rolling horizon scheduling in large job shops. 1891-1896 - Amit K. Gupta II, Appa Iyer Sivakumar, Sumit Sarawgi:
Scheduling & control: shop floor scheduling with simulation based proactive decision support. 1897-1902 - Sebastian Werner, Gerald Weigert:
Scheduling & control: process accompanying simulation: a general approach for the continuous optimization of manufacturing schedules in electronics production. 1903-1908 - Alex Cave, Saeid Nahavandi, Abbas Z. Kouzani:
Schedule evaluation: simulation optimization for process scheduling through simulated annealing. 1909-1913 - Ben M. Patterson, Mustafa Özbayrak, Theopisti Papadopoulou:
Schedule evaluation: simulation of JIT performance in a printing shop. 1914-1921 - Boon Aik Tan, Aldas Gubaras, Nipa Phojanamongkolkij:
Schedule evaluation: simulation study of Dreyer urgent care facility. 1922-1927
General applications and methodology
- Raid Al-Aomar:
General methodology 1: a robust simulation-based multicriteria optimization methodology. 1931-1939 - Mats Jägstam, Pär Klingstam:
General methodology 1: a handbook for integrating discrete event simulation as an aid in conceptual design of manufacturing systems. 1940-1944 - Douglas C. Creighton, Saeid Nahavandi:
General methodology 1: optimising discrete event simulation models using a reinforcement learning agent. 1945-1950 - Jennifer R. Linton, Catherine M. Harmonosky:
General methodology 2: a comparison of selective initialization bias elimination methods. 1951-1957 - Wei Biao Wu, George Michailidis, Danlu Zhang:
General methodology 2: an efficient method for simulating fractional stable motion. 1958-1963 - Jean-Baptiste Filippi, Paul Bisgambiglia:
General methodology 2: enabling large scale and high definition simulation of natural systems with vector models and JDEVS. 1964-1970 - Donald D. Dudenhoeffer, May R. Permann, Elliot M. Sussman:
General methodology 3: a parallel simulation framework for infrastructure modeling and analysis. 1971-1977 - George D. Magoulas
General methodology 3: global search strategies for simulation optimisation. 1978-1985 - Seungyub Lee, Sreeram Ramakrishnan, Richard A. Wysk:
General methodology 3: a federation object coordinator for simulation based control and analysis. 1986-1994 - Hansoo Kim, SugJe Sohn, Ying Wang, Tolga Tezcan, Leon F. McGinnis, Chen Zhou:
General applications 1: a simulation architecture with distributed controllers for cell-based manufacturing systems. 1995-2002 - Maria Estrella Sousa Vieira, Andrés Suárez-González, Cándido López-García, Manuel Fernández-Veiga, José C. López-Ardao:
General applications 1: a highly efficient M/G/Infinity model for generating self-similar traces. 2003-2010 - Caio Fiuza Silva, Eduardo Saggioro Garcia, Eduardo Saliby:
General applications 1: soccer championship analysis using monte carlo simulation. 2011-2016 - Jui-Hua Li, JoAnne Holliday, George Fegan:
General applications 2: decision making of embedded I/O buffer sizes using the queueing simulation model for a shared-memory system. 2017-2021 - Peng Sun, Sam Yuan Sung:
General applications 2: a general simulation environment for IP mobility. 2022-2030 - Guixiu Qiao, Charles R. McLean, Frank Riddick:
General applications 2: simulation system modeling for mass customization manufacturing. 2031-2036
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2025-01-24 17:02 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by: