Electromagnetic Characterization of Hyperconducting Aluminum Litz Wires at Cryogenic Temperatures - Hongye Zhang; Matteo Felice Iacchetti; Alexander C. Smith; Paul M. Tuohy; Charalampos D. Manolopoulos; Alexandru-Vlad Rusu; Vicente Climente-Alarcon (IEEE Access, 2024)

Current-Modulation-Based On-Line Resonance Tuning Strategy for Linear Generator Drives - Min Zhang; Alexey Bodrov; Roger Shuttleworth; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2021)

On the Stability of a Minimum-Loss Controlled Dual-VSI DFIG-DC System - Gil D. Marques; Matteo Felice Iacchetti; Sérgio M. A. Cruz (IECON 2021 - 47th Annual Conference of the IEEE Industrial Electronics Society, Toronto, ON, Canada, October 13-16, 2021, 2021)

Minimum-Loss Control Strategy for a Dual-VSI DFIG DC System - Gil D. Marques; Sérgio M. A. Cruz; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2020)

Minimum Loss Conditions in a Salient-Pole Wound-Field Synchronous Machine Drive - Gil D. Marques; Matteo Felice Iacchetti (IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society, Lisbon, Portugal, October 14-17, 2019, 2019)

Minimization of Torque Ripple in the DFIG-DC System Via Predictive Delay Compensation - Gil D. Marques; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2018)

Predictive Torque and Rotor Flux Control of a DFIG-DC System for Torque Ripple Compensation and Loss Minimization - Sérgio M. A. Cruz; Gil D. Marques; P. F. C. Goncalves; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2018)

Impact of Line and Control Parameters on Droop Stability in Inverters for Distributed Generation - Alberto Bolzoni; Giovanni Maria Foglia; Luisa Frosio; Matteo Felice Iacchetti; Roberto Perini (IEEE Trans. Smart Grid, 2018)

Sensorless Frequency and Voltage Control in the Stand-Alone DFIG-DC System - Gil D. Marques; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2017)

Parasitic Currents in Stray Paths of Some Topologies of YASA AFPM Machines: Trend With Machine Size - Antonino Di Gerlando; Giovanni Maria Foglia; Matteo Felice Iacchetti; Roberto Perini (IEEE Trans. Ind. Electron., 2016)

Field-Weakening Control for Efficiency Optimization in a DFIG Connected to a DC-Link - G. D. Marques; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2016)

A Self-Sensing Stator-Current-Based Control System of a DFIG Connected to a DC-Link - G. D. Marques; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2015)

Stator Inductance Self-Tuning in an Air-Gap-Power-Vector-Based Observer for the Sensorless Control of Doubly Fed Induction Machines - Matteo Felice Iacchetti; Gil D. Marques; Roberto Perini; Duarte M. Sousa (IEEE Trans. Ind. Electron., 2014)

Effects of Manufacturing Imperfections in Concentrated Coil Axial Flux PM Machines: Evaluation and Tests - Antonino Di Gerlando; Giovanni Maria Foglia; Matteo Felice Iacchetti; Roberto Perini (IEEE Trans. Ind. Electron., 2014)

Stator Frequency Regulation in a Field-Oriented Controlled DFIG Connected to a DC Link - Gil D. Marques; Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2014)

An Observer for Sensorless DFIM Drives Based on the Natural Fifth Harmonic of the Line Voltage, Without Stator Current Measurement - Francesco Castelli-Dezza; Matteo Felice Iacchetti; Roberto Perini (IEEE Trans. Ind. Electron., 2013)

Analysis and Test of Diode Rectifier Solutions in Grid-Connected Wind Energy Conversion Systems Employing Modular Permanent-Magnet Synchronous Generators - Antonino Di Gerlando; Gian Maria Foglia; Matteo Felice Iacchetti; Roberto Perini (IEEE Trans. Ind. Electron., 2012)

Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators - Antonino Di Gerlando; Gian Maria Foglia; Matteo Felice Iacchetti; Roberto Perini (IEEE Trans. Ind. Electron., 2011)

Adaptive Tuning of the Stator Inductance in a Rotor-Current-Based MRAS Observer for Sensorless Doubly Fed Induction-Machine Drives - Matteo Felice Iacchetti (IEEE Trans. Ind. Electron., 2011)