Electromagnetic Characterization of Hyperconducting Aluminum Litz Wires at Cryogenic Temperatures. - Zhang, Hongye; Iacchetti, Matteo Felice; Smith, Alexander C.; Tuohy, Paul M.; Manolopoulos, Charalampos D.; Rusu, Alexandru-Vlad; Climente-Alarcon, Vicente (IEEE Access, 2024)

Current-Modulation-Based On-Line Resonance Tuning Strategy for Linear Generator Drives. - Zhang, Min; Bodrov, Alexey; Shuttleworth, Roger; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2021)

On the Stability of a Minimum-Loss Controlled Dual-VSI DFIG-DC System. - Marques, Gil D.; Iacchetti, Matteo Felice; Cruz, Sérgio M. A. (2021)

Minimum-Loss Control Strategy for a Dual-VSI DFIG DC System. - Marques, Gil D.; Cruz, Sérgio M. A.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2020)

Minimum Loss Conditions in a Salient-Pole Wound-Field Synchronous Machine Drive. - Marques, Gil D.; Iacchetti, Matteo Felice (2019)

Minimization of Torque Ripple in the DFIG-DC System Via Predictive Delay Compensation. - Marques, Gil D.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2018)

Predictive Torque and Rotor Flux Control of a DFIG-DC System for Torque Ripple Compensation and Loss Minimization. - Cruz, Sérgio M. A.; Marques, Gil D.; Goncalves, P. F. C.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2018)

Impact of Line and Control Parameters on Droop Stability in Inverters for Distributed Generation. - Bolzoni, Alberto; Foglia, Giovanni Maria; Frosio, Luisa; Iacchetti, Matteo Felice; Perini, Roberto (IEEE Trans. Smart Grid, 2018)

Sensorless Frequency and Voltage Control in the Stand-Alone DFIG-DC System. - Marques, Gil D.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2017)

Parasitic Currents in Stray Paths of Some Topologies of YASA AFPM Machines: Trend With Machine Size. - Gerlando, Antonino Di; Foglia, Giovanni Maria; Iacchetti, Matteo Felice; Perini, Roberto (IEEE Trans. Ind. Electron., 2016)

Field-Weakening Control for Efficiency Optimization in a DFIG Connected to a DC-Link. - Marques, G. D.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2016)

A Self-Sensing Stator-Current-Based Control System of a DFIG Connected to a DC-Link. - Marques, G. D.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2015)

Stator Inductance Self-Tuning in an Air-Gap-Power-Vector-Based Observer for the Sensorless Control of Doubly Fed Induction Machines. - Iacchetti, Matteo Felice; Marques, Gil D.; Perini, Roberto; Sousa, Duarte M. (IEEE Trans. Ind. Electron., 2014)

Effects of Manufacturing Imperfections in Concentrated Coil Axial Flux PM Machines: Evaluation and Tests. - Gerlando, Antonino Di; Foglia, Giovanni Maria; Iacchetti, Matteo Felice; Perini, Roberto (IEEE Trans. Ind. Electron., 2014)

Stator Frequency Regulation in a Field-Oriented Controlled DFIG Connected to a DC Link. - Marques, Gil D.; Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2014)

An Observer for Sensorless DFIM Drives Based on the Natural Fifth Harmonic of the Line Voltage, Without Stator Current Measurement. - Castelli-Dezza, Francesco; Iacchetti, Matteo Felice; Perini, Roberto (IEEE Trans. Ind. Electron., 2013)

Analysis and Test of Diode Rectifier Solutions in Grid-Connected Wind Energy Conversion Systems Employing Modular Permanent-Magnet Synchronous Generators. - Gerlando, Antonino Di; Foglia, Gian Maria; Iacchetti, Matteo Felice; Perini, Roberto (IEEE Trans. Ind. Electron., 2012)

Axial Flux PM Machines With Concentrated Armature Windings: Design Analysis and Test Validation of Wind Energy Generators. - Gerlando, Antonino Di; Foglia, Gian Maria; Iacchetti, Matteo Felice; Perini, Roberto (IEEE Trans. Ind. Electron., 2011)

Adaptive Tuning of the Stator Inductance in a Rotor-Current-Based MRAS Observer for Sensorless Doubly Fed Induction-Machine Drives. - Iacchetti, Matteo Felice (IEEE Trans. Ind. Electron., 2011)