Estimation of Electrical Parameters of Five-Phase Permanent Magnet Synchronous Machines Using Instantaneous Impedance - Matheus Perin; Luis Alberto Pereira; Sérgio Haffner; Gabriel G. C. Branco; Ademir Nied; Dirceu Pereira (49th Annual Conference of the IEEE Industrial Electronics Society, IECON 2023, Singapore, October 16-19, 2023, 2023)

Uniqueness of Induction Machine Parameters Estimated from Data-Identifiability, Priors and Prediction Error Identification - Alexandre Sanfelici Bazanella; Diego Eckhard; Luis Alberto Pereira; Matheus Perin (61st IEEE Conference on Decision and Control, CDC 2022, Cancun, Mexico, December 6-9, 2022, 2022)

Estimation of Electrical Parameters of the Double-Cage Model of Induction Motors Using Manufacturer Data and Genetic Algorithm - Matheus Perin; Gabriel Behling Da Silveira; Luis Alberto Pereira; Sérgio Haffner; Dhamens M. S. Almansa (IECON 2022 - 48th Annual Conference of the IEEE Industrial Electronics Society, Brussels, Belgium, October 17-20, 2022, 2022)

Estimation of Electrical Parameters of the Single-, Double- and Triple-Cage Models of Induction Motors Using Manufacturer Data - Matheus Perin; Luis Alberto Pereira; Gabriel Behling Da Silveira; Dhamens M. S. Almansa; Iuri Marcelo; Luis Gustavo Cavichioli (IECON 2021 - 47th Annual Conference of the IEEE Industrial Electronics Society, Toronto, ON, Canada, October 13-16, 2021, 2021)

Multiobjective Optimization of Five-Phase Induction Machines Based on NSGA-II - Luis Alberto Pereira; Sergio Haffner; Guilherme Nicol; Tiago Fouchy Dias (IEEE Trans. Ind. Electron., 2017)

Airgap induction of five-phase induction machines operating with one opened phase - Luis Alberto Pereira; Luís Fernando Alves Pereira; Sergio Haffner (IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, Florence, Italy, October 23-26, 2016, 2016)

Unbalanced operation of five-phase induction machines using steady state symmetrical components - Part I: Theoretical considerations - Luis Alberto Pereira; Luís Fernando Alves Pereira; Sergio Haffner; Guilherme Nicol (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, November 9-12, 2015, 2015)

Unbalanced operation of five-phase induction machines using steady state symmetrical components 8452 Part II: Study of typical cases - Luis Alberto Pereira; Luís Fernando Alves Pereira; Sergio Haffner; Alexandre H. da Silveira (IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, Yokohama, Japan, November 9-12, 2015, 2015)

Comparison of operating curves of five-phase and three-phase induction machines of same size - Ricardo S. da Rosa; Luis Alberto Pereira; Luís Fernando Alves Pereira; Sergio Haffner (IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29 - November 1, 2014, 2014)

Multipurpose platform for control of 3-phase and 5-phase induction machines integrated with MATLAB/Simulink® - Rene A. Benvenuti; Luís Fernando Alves Pereira; Luis Alberto Pereira; Sergio L. Haffner; Marcelo Götz (IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29 - November 1, 2014, 2014)

Performance comparison of five phase and three phase induction machines under steady state including losses and saturation - Luis Alberto Pereira; Sergio Haffner; Luís Fernando Alves Pereira; Ricardo S. da Rosa (IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, November 10-13, 2013, 2013)

Torque capability of high phase induction machines with sinusoidal and trapezoidal airgap field under steady state - Luis Alberto Pereira; Sérgio Haffner; Luís F. A. Pereira; Ricardo S. da Rosa (IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society, Vienna, Austria, November 10-13, 2013, 2013)