https://developer.apple.com/forums/thread/707294 General: Forums subtopic: App & System Services > Networking DevForums tag: Network Extension Network Extension framework documentation Routing your VPN network traffic article Filtering traffic by URL sample code Filtering Network Traffic sample code TN3120 Expected use cases for Network Extension packet tunnel providers technote TN3134 Network Extension provider deployment technote TN3165 Packet Filter is not API technote Network Extension and VPN Glossary forums post Debugging a Network Extension Provider forums post Exporting a Developer ID Network Extension forums post Network Extension vs ad hoc techniques on macOS forums post Network Extension Provider Packaging forums post NWEndpoint History and Advice forums post Extra-ordinary Networking forums post Wi-Fi management: Wi-Fi Fundamentals forums post TN3111 iOS Wi-Fi API overview technote How to modernize your captive network developer news post iOS Network Signal Strength forums post See also Networking Resources. Share and Enjoy — Quinn “The Eskimo!” @ Developer Technical Support @ Apple let myEmail = "eskimo" + "1" + "@" + "apple.com"

Hi, My app uses the NetworkExtension framework to connect to an access point. For some reason, my app occasionally fails to find and/or connect to my AP (which I know is online and beaconing on a given frequency). This roughly happens 1/10 times. I am using an iPhone 17, running iOS 26.0.1. I am connecting to a WPA2-Personal network. In the iPhone system logs, I see the following: Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: Dequeuing command type: "Scan" pending commands: 0 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceCopyPreparedScanResults: network records count: 0 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: WiFi infra associated, NAN DISABLED, , DFS state Off, IR INACTIVE, llwLink ACTIVE, RTM-DP 0, allowing scans Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: isScanDisallowedByAwdl[1148] : InfraScanAllowed 1 (RTModeScan 0 NonSteering 0 assistDisc 0 HTMode 0 RTModeNeeded 0 Immin 0 ScanType 1 Flags 0 ScanOn2GOnly 0 DevAllows2G 1) Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x2(oldState 0) on:1, source:ScanManagerFamily, err:0 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: setScanningState:: Scan request from ScanManagerFamily. Time since last scan(1.732 s) Number of channels(0), 2.4 only(no), isDFSScan 0, airplaying 0, scanningState 0x2 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x2(oldState 0) on:1, source:ScanManagerFamily, err:0 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: Controller Scan Started, scan state 0 -> 2 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x0(oldState 2) on:0, source:ScanError, err:3766617154 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: setScanningState[23946]:: Scan complete for source(8)ScanError. Time(0.000 s), airplaying 0, scanningState 0x0 oldState 0x2 rtModeActive 0 (ProxSetup 0 curSchedState 3) Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: IO80211PeerManager::setScanningState:5756:_scanningState:0x0(oldState 2) on:0, source:ScanError, err:3766617154 Oct 10 10:34:10 kernel()[0] <Notice>: wlan0:com.apple.p2p: Controller Scan Done, scan state 2 -> 0 Oct 10 10:34:10 wifid(IO80211)[54] <Notice>: Apple80211IOCTLSetWrapper:6536 @[35563.366221] ifname['en0'] IOUC type 10/'APPLE80211_IOC_SCAN_REQ', len[5528] return -528350142/0xe0820442 Oct 10 10:34:10 wifid[54] <Notice>: [WiFiPolicy] {SCAN-} Completed Apple80211ScanAsync on en0 (0xe0820442) with 0 networks Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Error>: __WiFiDeviceCreateFilteredScanResults: null scanResults Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceCreateFilteredScanResults: rssiThresh 0, doTrimming 0, scanResultsCount: 0, trimmedScanResultsCount: 0, filteredScanResultsCount: 0, nullNetworksCount: 0 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerDispatchUserForcedAssociationCallback: result 1 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Error>: __WiFiDeviceManagerForcedAssociationCallback: failed to association error 1 Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: WiFiLocalizationGetLocalizedString: lang='en_GB' key='WIFI_JOIN_NETWORK_FAILURE_TITLE' value='Unable to join the network \M-b\M^@\M^\%@\M-b\M^@\M^]' Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: WiFiLocalizationGetLocalizedString: lang='en_GB' key='WIFI_FAILURE_OK' value='OK' Oct 10 10:34:10 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerUserForcedAssociationScanCallback: scan results were empty It looks like there is a scan error, and I see the error: failed to association error 1. I have also seen the iOS device find the SSID but fail to associate (associated error 2): Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiMetricsManagerCopyLinkChangeNetworkParams: updating AccessPointInfo: { DeviceNameElement = testssid; ManufacturerElement = " "; ModelName = " "; ModelNumber = " "; } Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiMetricsManagerCopyLinkChangeNetworkParams: minSupportDataRate 6, maxSupportDataRate 54 Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: Disassociated. Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: __WiFiMetricsManagerUpdateDBAndSubmitAssociationFailure: Failed to append deauthSourceOUI to CA event Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: __WiFiMetricsManagerUpdateDBAndSubmitAssociationFailure: Failed to append bssidOUI to CA event ..... <log omitted> ..... <log omitted> Oct 8 12:25:52 wifid(CoreWiFi)[54] <Notice>: [corewifi] END REQ [GET SSID] took 0.005530542s (pid=260 proc=mediaplaybackd bundleID=com.apple.mediaplaybackd codesignID=com.apple.mediaplaybackd service=com.apple.private.corewifi-xpc qos=21 intf=(null) uuid=D67EF err=-528342013 reply=(null) Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Presenting a CFUserNotification with reply port: 259427 on behalf of: wifid.54 Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Received request to activate alertItem: <SBUserNotificationAlert: 0xc20a49b80; title: Unable to join the network \M-b\M^@\M^\\134^Htestssid\134^?\M-b\M^@\M^]; source: wifid; pid: 54> Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerUserForcedAssociationCallback: failed forced association Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Activation - Presenting <SBUserNotificationAlert: 0xc20a49b80; title: Unable to join the network \M-b\M^@\M^\\134^Htestssid\134^?\M-b\M^@\M^]; source: wifid; pid: 54> with presenter: <SBUnlockedAlertItemPresenter: 0xc1d9f6530> Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Notice>: __WiFiDeviceManagerDispatchUserForcedAssociationCallback: result 2 Oct 8 12:25:52 SpringBoard(SpringBoard)[244] <Notice>: Activation - Presenter:<SBUnlockedAlertItemPresenter: 0xc1d9f6530> will present presentation: <SBAlertItemPresentation: 0xc1cd40820; alertItem: <SBUserNotificationAlert: 0xc20a49b80; presented: NO>; presenter: <SBUnlockedAlertItemPresenter: 0xc1d9f6530>> Oct 8 12:25:52 wifid(WiFiPolicy)[54] <Error>: __WiFiDeviceManagerForcedAssociationCallback: failed to association error 2 Anyone able to help with this?

We have a content filter system extension as part of our macOS app. The filter normally works correctly, activation and deactivation works as expected but occasionally we see an issue when the content filter is activated. When this issues occurs, the filter activation appears to behave correctly, no errors are reported. Using "systemextensionsctl list" we see the filter is labelled as "[activated enabled]". However, the installed content filter executable does not run. We have seen this issue on macOS 15.3 and later and on the beta macOS 26.1 RC. It happens only occasionally but when it does there is no indication as to why the executable is not running. There are no crash logs or errors in launchd logs. Both rebooting and deactivating/activating the filter do not resolve the issue. The only fix appears to be completely uninstalling the app (including content filter) and reinstalling. I have raised a FB ticket, FB20866080. Does anyone have any idea what could cause this?

On my iPhone 16 Pro and iPhone 16 Pro Max devices, running iOS 26.0, 26.0.1, and 26.1, Wi-Fi raw socket communication works flawlessly. Even after keeping the connection active for over 40 minutes, there are no disconnections during data transmission. However, on the iPhone 17 and iPhone 17 Pro, the raw socket connection drops within 20 seconds. Once it disconnects, the socket cannot reconnect unless the Wi-Fi module itself is reset. I believe this issue is caused by a bug in the iPhone 17 series’ communication module. I have looked into many cases, and it appears to be related to a bug in the N1 chipset. Are there any possible solutions or workarounds for this issue?

fetchCurrent(completionHandler:) https://developer.apple.com/documentation/networkextension/nehotspotnetwork/fetchcurrent(completionhandler:) The same code works fine in Xcode 16, but when I run the same project in Xcode 26, it doesn't work

I am new to iOS development and boldly decided to work on a project using the Network Extension with the goals of intercepting all incoming packets (not exclusive to my app), creating temporary copies, passing through the original unmodified packet, and then processing the copy. I currently have a Packet Tunnel that intercepts all IPv4 packets, but I do not know how to route them. The goal is to keep everything on the device for privacy concerns. So I have a few questions in mind: Is a packet tunnel necessary? I am reading into the Content Filter, but I am unsure if I can use it due to Apple's own apps possibly bypassing it. Is it possible to route packets collected from the tunnel? I thought about using NE Relays, but to my knowledge I cannot use the packets I obtained to do this. Are there any references to existing implementations I can look through? Are there any other unforeseen issues I might encounter while developing this? I can provide more information about the project I am working on if necessary. Any advice, references or sample code will be appreciated. Thanks in advance!

Hello, We've been working on an app that uses the new NEUrlFilter API and we've got a question. Currently, the system is designed with the assumption that a single app == usecase == single remote database. But what if we would like to give the user the ability to use different blocklists? For example, the user may want to: Block scam domains Block tracking domains Block adult domains Or any composition of these 3 What should we do to give the user this option? It seems that we could differentiate different databases by using different PIR service hostnames, but that would also mean that we'll have to send several requests for the same usecase but with different PIR service hostnames (and they'll all share the same app bundle ID). Will these requests be accepted then? If not, is there an alternative? PS: By sending a request I mean submitting this form

I filed FB19631435 about this just now. Basically: starting with 15.6, we've had reports (internally and outternally) that after some period of time, networking fails so badly that it can't even acquire a DHCP lease, and the system needs to be rebooted to fix this. The systems in question all have at least 2 VPN applications installed; ours is a transparent proxy provider, and the affected system also had Crowdstrike's Falcon installed. A customer system reported seemingly identical failures on their systems; they don't have Crowdstrike, but they do have Cyberhaven's. Has anyone else seen somethng like this? Since it seems to involve three different networking extensions, I'm assuming it's due to an interaction between them, not a bug in any individual one. But what do I know? 😄

Hi, when I perform an overlay installation via a PKG on macOS for an application containing the NEFilterDataProvider functionality, there is a chance that the entire system network becomes unreachable. Disabling the corresponding Content Filter in "System Settings > Network > Filters" immediately restores network connectivity. This issue does not occur every time, with a frequency of approximately 1 in 20 installation attempts.  The following details may help identify the problem: The Filter.app containing the NEFilterDataProvider resides within the main app's Resources directory, e.g., /Applications/Main.app/Contents/Resources/Filter.app Main.app is installed via a PKG; the issue typically occurs during an overlay installation of Main.app. The NEFilterDataProvider operates as a System Extension. The func handleNewFlow(_ flow: NEFilterFlow) -> NEFilterNewFlowVerdict {} returns .allow. Wireshark packet captures show TCP packets but no UDP packets; TCP handshakes cannot complete. Disabling the corresponding content filter in "System Settings > Network > Filters" restores the network; re-enabling it breaks connectivity again. After waiting for a period, approximately 30-60 minutes, network connectivity can recover automatically. What causes this and how can it be fixed? Any workarounds?

Hello, I'm an application developer related to Apple system extensions. I developed an endpoint security system extension that can run normally before the 14.x system. However, after I upgraded to 15.x, I found that when I uninstalled and reinstalled my system extension, although the system extension was installed successfully, a system warning box would pop up when I clicked enable in the Settings, indicating a failure. I conducted the following test. I reinstalled a brand-new MAC 15.x system. When I installed my applications, the system extensions could be installed successfully and enabled normally. However, when I uninstalled and reinstalled, my system extension couldn't be enabled properly and a system warning popped up as well. I tried disabling SIP and enabling System Extension Developers, but it still didn't work. When the system warning box pops up, I can see some error log information through the console application, including an error related to Failed to authorize right 'com.apple.system-extensions.admin' by client '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] for authorization created by '/System/Library/ExtensionKit/Extensions/SettingsSystemExtensionController.appex' [2256] (3,0) (-60005) (engine 179) as shown in the screenshot. The same problem, mentioned in Cannot approve some extensions in MacOS Sequoia , but there is no solution

The environment: macOS 12.0 ~ 15.6 A NetworkExtension NEFilterDataProvider configured with filterSockets = YES, filterPackets = NO, and it doesn't actually block any network connection. QQMusic (download: https://y.qq.com/n/ryqq/download_detail/mac?ADTAG=YQQ) is constantly playing. Any of the following operations can reproduce the issue: Kill the NetworkExtension process and then restarted by the system. Disable the NEFilterDataProvider, and then enable it. When this problem occurs, there are two different phenomena on the NetworkExtension process: It is zombie, or is in high CPU state (100%). When the NetworkExtension process is zombie, obviously, the new network connections will enter it, and they can't be disposed by the old zombie process, so the network is disconnected. Spindump-qqmusic-ne-zombie When the NetworkExtension process is in high CPU state, its thread DispatchQueue "NEFilterExtensionProviderContext queue" is blocked in the kernel when calling close. Spindump-qqmusic-ne-cpuhigh In most cases, the network will recover after stopping QQ Music, that is the suspended zombie NetworkExtension process will exist or the cpu of it return to normal. To reproduce the issue in a simple environment, I have tried many ways to simulate the network behavior of QQMusic, but all failed. It seems that this issue is caused by UDP traffic of QQMusic, because everything is ok after blocking the UDP connections of QQMusic (the music is still playing at this time) in the NEFilterDataProvider.

Hello, I’ve run into some strange behavior with the macOS System Extension using a Packet Tunnel. The issue showed up after the device went to sleep while the VPN was running. When I woke the computer, the VPN tried to reconnect but never succeeded — it just stayed stuck in the “connecting” state. I was able to turn the VPN off, but every attempt to turn it back on failed and got stuck at “connecting” again. Even removing the VPN configuration from Settings didn’t help. The only thing that worked was disabling the system extension completely. While checking the logs, I noticed thousands of identical log messages appearing within just a few seconds: nesessionmanager(562) deny(1) system-fsctl (_IO "h" 47) 17:11:52.481498+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481568+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481580+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481587+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5454 com.apple.networkextension 17:11:52.481646+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481664+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481671+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481676+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481682+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension 17:11:52.481687+0200 NESMVPNSession[Primary Tunnel:Secure DNS: got On Demand start message from pid 5446 com.apple.networkextension After the burst of these repeated messages, I started seeing logs like the following: 17:11:52.481759+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.481790+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.481949+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.481966+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.481986+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.481992+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482003+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.482011+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482022+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.482028+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482039+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Spotify Helper[69038] com.apple.networkextension 17:11:52.482049+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Spotify Helper[69038]: session in state connecting com.apple.networkextension 17:11:52.482060+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from Slack Helper[84828] com.apple.networkextension 17:11:52.482069+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from Slack Helper[84828]: session in state connecting com.apple.networkextension 17:11:52.482079+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Received a start command from sharingd[764] com.apple.networkextension 17:11:52.482086+0200 NESMVPNSession[Primary Tunnel:Secure DNS: Skip a start command from sharingd[764]: session in state connecting com.apple.networkextension It is clear that the connection is in a loop of submitting request to start and then failing. This problem occured only after sleep on macOS 26.0 and 15.6. This issue only occured after the system woke up from sleep. macOS 15.6 and 26.0. Is this a known problem, and how should I go about troubleshooting or resolving it?

Aloha. Opening and closing VPN tunnels results in as many utun interfaces as the amount of times the tunnel has been opened. These interfaces stay present and seem to be removed only upon system reboot. We are using the NetworkExtension as a SystemExtension on macOS to create the virtual interfaces. Is this the normal behaviour. Has anybody else experienced this? utun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1380 inet6 fe80::8038:c353:17cd:c422%utun0 prefixlen 64 scopeid 0xf nd6 options=201<PERFORMNUD,DAD> utun1: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 2000 inet6 fe80::cfb6:1324:d7e9:5d5%utun1 prefixlen 64 scopeid 0x10 nd6 options=201<PERFORMNUD,DAD> utun2: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun3: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun4: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun5: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun6: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun7: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM> utun8: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1300 options=6463<RXCSUM,TXCSUM,TSO4,TSO6,CHANNEL_IO,PARTIAL_CSUM,ZEROINVERT_CSUM>

Hello, I have been playing around the the SimpleURLFilter sample code. I keep getting this error upon installed the filter profile on the device: mapError unexpected error domain NEVPNConnectionErrorDomainPlugin code 7 which then causes this error: Received filter status change: <FilterStatus: 'stopped' errorMessage: 'The operation couldn’t be completed. (NetworkExtension.NEURLFilterManager.Error error 14.)'> I can't find much info about code 7. Here is the configuration I am trying to run: <Configuration: pirServerURL: 'http://MyComputer.local:8080' pirAuthenticationToken: 'AAAA' pirPrivacyPassIssuerURL: 'http://MyComputer.local:8080' enabled: 'true' shouldFailClosed: 'true' controlProviderBundleIdentifier: 'krpaul.SimpleURLFilter.SimpleURLFilterExtension' prefilterFetchInterval: '2700.0'>

When a VPN is active, RCS messaging does not work on iOS 18. I work on an iOS VPN app, and we were very appreciative of the excludeCellularServices network flag that was released during the iOS 16 cycle. It's a great solution to ensure the VPN doesn't interfere with cellular network features from the cellular provider. Separately - As a user, I'm excited that iOS 18 includes RCS messaging. Unfortunately, RCS messaging is not working when our VPN is active (when checking on the iOS 18 release candidate). My guess is that RCS is not excluded from the VPN tunnel, even when excludeCellularServices is true. It seems like RCS should be added in this situation, as it is a cell provider service. Can RCS be added as a service that is excluded from the VPN tunnel when excludeCellularServices is true? (I've also sent this via feedback assistant, as 15094270.)

We have observed a per-process limitation on the number of simultaneous nw_connection_t objects in certain macOS environments. On some systems, this limit does not appear to apply, but on others the limitation is reproducible. When a process attempts to establish a large number of connections (e.g. 512+), some connections enter the nw_connection_state_waiting state and report the POSIX error “Cannot allocate memory”. These connections remain stuck indefinitely, even after other connections are deallocated and resources should theoretically be available again. This behavior severely impacts use cases such as transparent proxies implemented via the NetworkExtension framework, which intercept system-wide traffic and must open connections on behalf of all client processes. In this scenario, a per-process limit effectively becomes a system-wide limit, leading to unexpected and hard-to-diagnose network failures in client applications. So, is there any way to disable this restriction for Network Extension processes? Are there any system settings that could affect this limitation and be modified by users?

Hi team, We need to identify the domains used by macOS Software Update so they can be bypassed by our NETransparentProxy. The Apple support article below lists Software Update and several other Apple service domains. At the moment we’re unsure whether we should only bypass the Software Update and Beta Software domains, or whether we also need to bypass domains used for certificate validation, device management (Apple Business Manager / Apple School Manager / Apple Business Essentials), network provider updates, Apple Diagnostics, etc. We also need the specific IP ranges used exclusively by Software Update. The document shows Apple’s entire IP range; for IPv4 you can allow outbound connections to 17.0.0.0/8. https://support.apple.com/en-in/101555

When filtering traffic to localhost (127.0.0.1), it causes Maven repository synchronization to fail in IntelliJ IDEA. However, Maven works correctly when local traffic is not filtered. I will provide a minimal code reproduction below. - (void)startFilterWithCompletionHandler:(void (^)(NSError *error))completionHandler { // Add code to initialize the filter NSMutableArray *rules = [NSMutableArray array]; NENetworkRule * rule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolTCP direction:NETrafficDirectionAny]; [rules addObject:[[NEFilterRule alloc]initWithNetworkRule:rule action:NEFilterActionFilterData]]; rule = [[NENetworkRule alloc] initWithRemoteNetwork:nil remotePrefix:0 localNetwork:nil localPrefix:0 protocol:NENetworkRuleProtocolUDP direction:NETrafficDirectionAny]; [rules addObject:[[NEFilterRule alloc]initWithNetworkRule:rule action:NEFilterActionFilterData]]; NWHostEndpoint *hostEndpointIpv4 = [NWHostEndpoint endpointWithHostname:@"127.0.0.1" port:@"0"]; NENetworkRule *localHostRuleIpv4 = [[NENetworkRule alloc] initWithRemoteNetwork:hostEndpointIpv4 remotePrefix:32 localNetwork:hostEndpointIpv4 localPrefix:32 protocol:NENetworkRuleProtocolAny direction:NETrafficDirectionAny]; [rules addObject:[[NEFilterRule alloc]initWithNetworkRule:localHostRuleIpv4 action:NEFilterActionFilterData]]; NEFilterSettings *filterSetting = [[NEFilterSettings alloc] initWithRules:rules defaultAction:NEFilterActionAllow]; [self applySettings:filterSetting completionHandler:^(NSError * _Nullable error) { if (error) { NSLog(@"Failed to apply filter settring: %@", error.localizedDescription); } completionHandler(error); }]; } Maven Sync error: System Log: 默认 17:35:13.184509+0800 kernel cfil_inp_log:6179 <CFIL: outbound TCP data dropped for pre-existing un-filtered flow>: [41046 idea] <TCP out so 3bb6402f58a82e37 - flags 0x800840 0x80> lport 63166 fport 29735 laddr 127.0.0.1 faddr 127.0.0.1 默认 17:35:13.184510+0800 kernel cfil_inp_log:6179 <CFIL: outbound TCP data dropped for pre-existing un-filtered flow>: [41046 idea] <TCP out so d6dde374c8cb613b - flags 0x800840 0x80> lport 63165 fport 29735 laddr 127.0.0.1 faddr 127.0.0.1 默认 17:35:13.529546+0800 kernel cfil_inp_log:6179 <CFIL: outbound TCP data dropped for pre-existing un-filtered flow>: [41046 idea] <TCP out so cc915e74ba29f8cb - flags 0x800840 0x80> lport 63169 fport 39066 laddr 127.0.0.1 faddr 127.0.0.1 默认 17:35:13.529546+0800 kernel cfil_inp_log:6179 <CFIL: outbound TCP data dropped for pre-existing un-filtered flow>: [41046 idea] <TCP out so 2e15c3e54ebcc45 - flags 0x800840 0x80> lport 63168 fport 39066 laddr 127.0.0.1 faddr 127.0.0.1 默认 17:35:14.046094+0800 kernel cfil_inp_log:6179 <CFIL: outbound TCP data dropped for pre-existing un-filtered flow>: [41046 idea] <TCP out so 71f6d3a53472131f - flags 0x800840 0x80> lport 63172 fport 53241 laddr 127.0.0.1 faddr 127.0.0.1 默认 17:35:14.046145+0800 kernel cfil_inp_log:6179 <CFIL: outbound TCP data dropped for pre-existing un-filtered flow>: [41046 idea] <TCP out so c88a367c9717185b - flags 0x800840 0x80> lport 63171 fport 53241 laddr 127.0.0.1 faddr 127.0.0.1 Environment Details: Operating System: macOS 15.5 (Sequoia) IDE: IntelliJ IDEA 2025.1 Relevant Technology: NEFilterDataProvider (Network Extension) I have found reports of similar problems online： https://discussionschinese.apple.com/thread/255270330?sortBy=rank https://blog.csdn.net/weixin_42339552/article/details/137402307 They all seem to be caused by network extension。

Configure the App ID in the Apple Developer Portal. In the Network Extensions section, the Packet Tunnel section is not displayed, as shown in the figure below How to proceed with the configuration of App ID. In the Network Extensions section: Display the Packet Tunnel section Our account is a China region account

Configure the App ID in the Apple Developer Portal. In the Network Extensions section, the Packet Tunnel section is not displayed How to proceed with the configuration of App ID. In the Network Extensions section: Display the Packet Tunnel section Our account is a China region account

I'm working with Apple's SimpleURLFilter sample project and consistently encountering an error when trying to implement the URL filter. Here are the details: Setup: Downloaded the official SimpleURLFilter sample project from Apple Set the developer team for both targets (main app and extension) Built and ran the PIR server on my laptop using Docker as per the sample instructions Built the iOS project on my iPhone running iOS 26.0.1 Server is accessible at my Mac's IP address on port 8080 Configuration: PIR Server URL: http://[my-mac-ip]:8080 Authentication Token: AAAA (as specified in service-config.json) Privacy Pass Issuer URL: (left empty) Fail Closed: enabled Code Changes: The only modifications I made were: Updated bundle identifiers to include my team identifier Updated PIR server's service-config.json to match: com.example.apple-samplecode.SimpleURLFilter[TEAM_ID].url.filtering Modified URLFilterControlProvider.swift: Added existingPrefilterTag: String? parameter to fetchPrefilter() method Added tag: "bloom_filter" parameter to NEURLFilterPrefilter initializer Issue: After configuring the filter and entering my passcode in Settings, I consistently see: Received filter status change: <FilterStatus: 'starting'> Received filter status change: <FilterStatus: 'stopped' errorMessage: 'The operation couldn't be completed. (NetworkExtension.NEURLFilterManager.Error error 9.)'> Questions: What does NEURLFilterManager.Error error 9 specifically indicate? Could the URLFilterControlProvider modifications be causing this issue? Are there debugging steps to get more detailed error information? Any guidance would be appreciated!