Advances on Mechanics, Design Engineering and Manufacturing II. Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018)

Francisco Cavas Martínez; Francisco J. Fernández Cañavate; Paz Morer Camo; Benoit Eynard; Daniel García Fernández-Pacheco; Vincenzo Nigrelli

Ayuda

Advances on Mechanics, Design Engineering and Manufacturing II. Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018)

Imagen de portada del libro Advances on Mechanics, Design Engineering and Manufacturing II. Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2018)

Información General

Autores: Francisco Cavas Martínez (ed. lit.), Francisco J. Fernández Cañavate (ed. lit.), Paz Morer Camo (ed. lit.), Benoit Eynard (ed. lit.), Daniel García Fernández-Pacheco (ed. lit.), Vincenzo Nigrelli (ed. lit.)
Editores: Springer Suiza
Año de publicación: 2019
Colecciones: Lecture Notes in Mechanical Engineering
País: Suiza
Idioma: inglés
ISBN: 978-3-030-12346-8, 978-3-030-12345-1
Recoge los contenidos presentados a: Advances on Mechanics, Design Engineering and Manufacturing (2. 2018. Cham).
Texto completo no disponible (Saber más ...)

Otros catálogos

Red de Bibliotecas Universitarias (REBIUN)

Citas a capítulos: 5 Citas

Listado de artículos

- Efficiency and Reliability of Gravity DieCasting Models for Simulation Based Design
  Alberto Vergnano, E. Brambilla, G. Bonfiglioli
  págs. 3-12
- Integrating Sustainability in ProductDevelopment Projects
  L. Diago, E. Lacasa, L. Urmente, I. Millán, J.L. Santolaya Santolaya
  págs. 13-22
- Methodology for a Sustainable Designof Product-Service Systems
  I. Millán, E. Lacasa, A. Sánchez, L. Diago, José Luis Santolaya Sáenz
  págs. 23-31
- Human Factors Assessment for Comfortand Safety in the XCAT Powerboats Rules
  Samuele C.A. Abrami, F. A. Cucinotta, E. Guglielmino, F. Sfravara
  págs. 32-40
- Development of a Low-Cost WearablePrevention System for MusculoskeletalDisorders Using Inertial Measurement UnitSystems
  C. Cao, María Isabel Rodríguez Ferradas, Aitor Cazón Martín, Paz Morer Camo
  págs. 41-51
- Fingers’ Biomechanical Analysiswith Smartphone User Tests
  P. Mitrouchev, J. Chen, Federico Quaini
  págs. 52-61
- An Impact Testing Machine Developmentfor Helmets According to Several Standards
  D. Ranz, R. Miralbés, D. Sánchez
  págs. 62-73
- Well Planned Obsolescence and the Eco-Design
  J. M. Paricio Talayero, J.A. Peña, R. Miralbés
  págs. 74-84
- Experimental and Numerical Studyof the Self-loosening of a Bolted Assembly
  V. Rafik, Benoit Combès, A. Daidié, Clément Chirol
  págs. 85-94
- A New Approach for Machine-ToolArchitecture Selection at Preliminary DesignStage
  H. Chanal, M. Lajili, C. Bouzgarrou, E. Duc
  págs. 95-104
- Measurement Device Design: MultipurposeRain Gauge
  María del Carmen Ladrón de Guevara Muñoz, Jesús Sánchez Martos, Óscar David de Cozar Macías, Elidia Beatriz Blázquez Parra, Isidro Ladrón de Guevara López
  págs. 105-122
- Multifunctional Device for Bicycles
  P. Lardón Amat, Óscar David de Cozar Macías, Francisca José Castillo Rueda, María del Carmen Ladrón de Guevara Muñoz, Laia Miravet Garret
  págs. 123-133
- Modeling and Development of a ProsthesisInspired by the Anthropometry of the Hand
  L. Dunai, I. Lengua, I. Capcanari, Guillermo Peris Fajarnés
  págs. 134-142
- Adaptation in the Design of a WeighingLysimeter for Use in Potato Crops
  J.A. Nicolás Cuevas, Dolores Parras Burgos, Leandro Ruiz Peñalver, José Miguel Molina Martínez
  págs. 143-151
- Identification of the Main Contributorsin the 3D Tolerances Assessment in MechanicalTransmissions
  Francesco Gherardini, Davide Panari, Francesco Leali
  págs. 152-161
- A Virtual Kinematic Design of DentalRestorations Using Reverse Engineering
  Maitane Iturrate García, Rikardo Mínguez Gabiña, Nerea Toledo Gandarias, Harkaitz Eguiraun Martinez, Ana I. de Prado Taranilla, Eneko Solaberrieta
  págs. 165-173
- Design of an Interactive Web Interface UsingGraphics for Simulating and Assessing VisualImpact in Sustainable Building Projects
  J.S. Jeong, A. Ramírez Gómez
  págs. 174-183
- Topology Optimization AdditiveManufacturing-Oriented for a BiomedicalApplication
  F. A. Cucinotta, E. Guglielmino, G. Longo, G. Risitano, Daniela Santonocito, F. Sfravara
  págs. 184-193
- A Reverse-Engineering Approachfor the Management of Product GeometricalVariations During Assembly
  J.L. Gregorio Gregorio, C. Lartigue, E. Thiébaut, H. Falgarone
  págs. 194-202
- Free-State Shape of Aeronautical Componentsfor Assembly Simulation
  F. Gringoz, E. Thiébaut, C. Lartigue, B. Soufflet
  págs. 203-212
- Analysis of the Virtual Facebow Transfer by Using a Facebow Fork. An In Vitro Study
  Eneko Solaberrieta, Mikel Iturrate Mendieta, José Antonio Oriozabala Brit, Xabier Amezua Lasuen, Lander Barrenetxea Apraiz, O. Etxaniz
  págs. 213-224
- Methodology for the 3D Reconstructionof Industrials Facilities Using Photogrammetry
  R. Miralbés, H. Peña, J.A. Peña
  págs. 225-234
- Visual Impact Assessment for Offshore WindFarms Along the Cantabrian Coast
  Joaquín López Uriarte, Piedad Eliana Lizcano Amorocho, Cristina Manchado del Val, Valentín Gómez Jáuregui, C. Otero
  págs. 235-241
- Graphic Survey and 3D Virtual Restorationof a 16th Century Watch Tower: NavidadTower (Cartagena, Spain)
  Josefa García León, Josefa Ros Torres, Gemma Vázquez Arenas, Pedro Enrique Collado Espejo, J. Pérez Navarro, M. Ramos Martínez
  págs. 242-251
- Design of a Two Arms Exoskeleton as HapticDevice for Virtual Reality Applications
  Dimitar Chakarov, Ivanka Veneva, M. Tsveov, P. Mitrouchev, P. Venev
  págs. 252-262
- 3D Organic Modeling Using HybridTechniques with Polygons
  C. López, J.A. Peña, R. Miralbés
  págs. 263-271
- Study of the Cylindrical Symmetry MaterialsDependence with the Temperaturein a Nonlinear Heat Transfer by NetworkMethod
  M. Fernández, J.F. Sanchez Pérez, F. del Cerro Ortuño
  págs. 272-281
- Exploiting Augmented Reality to DisplayTechnical Information on Industry 4.0 P&ID
  Antonio Boccaccio, G.L. Cascella Cascella, M. Fiorentino, Mariateresa Gattullo, V.M. Manghisi, G. Monno, A. E. Uva
  págs. 282-291
- A Design Approach to Support BIMfor Existing Structures
  Paolo Cicconi, Roberto Raffaeli, A. Borghi
  págs. 292-300
- A Procedure for Cutting Guides Designin Maxillofacial Surgery: A Case-Study
  L. Ulrich, Fulvia G Baldassarre, Federica Marcolin, S. Moos, S. Tornincasa, E. Vezzett, Domenico Speranza, Guglielmo Ramieri, E. Zavattero
  págs. 301-310
- An Integrated Approach for ShapeOptimization with Mesh-Morphing
  M. Calí, S.M. Oliveri, Marco Evangelos Biancolini, G. Sequenzia
  págs. 311-322
- Posture Evaluation for FragmentRe-Alignment of Ancient Bronze Statues:The Case Study of the Principe Ellenistico
  M. Bici, Raquel Estefania Guachi Loma, O. Colacicchi, Giorgio D'ercoli, F. Campana
  págs. 323-335
- Review of Industrial Design Optimizationby Genetic Algorithms
  F.L. Sáez Gutiérrez, F.J.F. Cañavate, Antonio Guerrero González
  págs. 336-346
- Defining Scanning Trajectory for on-MachineInspection Using a Laser-Plane Scanner
  D.M.P. Nguyen P. Nguyen, Y. Quinsat, Claire Lartigue
  págs. 349-358
- Use of Additive Manufacturing on Modelsfor Sand Casting Process
  C. Bermudo, S. Martín Béjar, F.J. Trujillo, L. Sevilla
  págs. 359-369
- Approach to the Management Appliedto the Periodical Technical Inspection(PTI) Stations in the Context of Industry 4.0
  Julio García Cordonié, Pablo Izquierdo Belmonte, Jose Antonio Vilán Vilán, Abraham Segade Robleda, Enrique Casarejos Ruiz, Marcos López Lago
  págs. 370-379
- Influential Parameters in Plunge Millingfor Titanium Alloy Ti-6Al-4V
  M. Fredj, F. Monies, W. Rubio, J. Senatore
  págs. 380-390
- A Model-Based Approach to Supportthe Design of Mold Heating for Composites
  Paolo Cicconi, E. Pallotta, Anna Costanza Russo, Roberto Raffaeli, M. Prist, A. Monteriù, S. Longhi, M. Germani
  págs. 391-401
- New Issues for Workers Safety in the Factoryof the Future
  P. Martín, B. Daille Lefèvre, Jacques Marsot, X. Godot, G. Abba, Ali Siadat, Mª Angélica Gómez Echeverri
  págs. 402-411
- 3D Model Representation and Data Exchangefor Additive Manufacturing
  G. Savio, R. Meneghello, S. Rosso, G. Concheri
  págs. 412-421
- Applying High Speed Video to Optimizethe Performance of Milling Tools
  C. García Hernández, A. Martínez Angulo, Nikolaos Efkolidis, Pedro Ubieto Artur, José Luis Huertas Talón, Panagiotis Kyratsis
  págs. 422-429
- A Knowledge-Based Augmented Reality Toolfor Managing Design Variations
  L. Barbieri, E. Marino, F. Bruno
  págs. 430-439
- Investigation of Aluminum Alloy PropertiesDuring Helical Roller Burnishing ThroughFinite Element Simulations and Experiments
  L. Kamgaing Souop, A. Daidie, Y. Landon, J. Senatore, M. Ritou
  págs. 440-450
- Topological Optimization of a Structural NavalComponent Manufactured in FDM
  A. Mancuso, G. Pitarresi, Ralph A. Saporito, D. Tumino
  págs. 451-462
- The Influence of Build Orientationon the Flatness Error in Artifact Producedby Direct Metal Laser Sintering (DMLS)Process
  S. Rizzuti, L. De Napoli, S. Ventra
  págs. 463-472
- New Customized Elbow Orthosis Madeby Additive Manufacturing
  R.I. Campbell, Tommaso Ingrassia, Vincenzo Nigrelli, Veronica Ricotta
  págs. 473-483
- Accuracy Assessment of CT-Based 3D BoneSurface Reconstruction
  L. Puggelli, F. Uccheddu, Y. Volpe, R. Furferi, D. Di Feo
  págs. 487-496
- Comparative Study of Mussel Shells Using 3DScanning
  Harkaitz Eguiraun Martinez, E. Gil Iriarte, Lander Barrenetxea Apraiz, Erlantz Lizundia Fernández, J. I. Zuazo Arsuaga, M. Soto
  págs. 497-504
- VR Medical Treatments. A 15-YearStatistical Overview
  J.M Salmerón Núñez, R. García Sánchez, J. Ordoñez García
  págs. 505-516
- Geometry Modelling of Regular Scaffoldsfor Bone Tissue Engineering: A ComputationalMechanobiological Approach
  Antonio Boccaccio, M. Fiorentino, Mariateresa Gattullo, V. M. Manghisi Manghisi, G. Monno, A. E. Uva
  págs. 517-526
- Parenthood Perception Enhancement ThroughInteraction with 3D Printed Fetal Face Models
  Domenico Speranza, Fabrizio Padula, Barbara Moty, Stefano Tornincasa, Federica Marcolin, E. Vezzetti, Massimo Martorelli
  págs. 527-535
- System of Precision Osteotomy in BoneReconstruction Surgery: PUVACO
  C.M. Baño, P. Puertas, Beatriz Abellan Rosique
  págs. 536-541
- 3D Simulation of Hazelnut Chopping—AGeometrical Study Comparedwith Experimental Results
  C. Conigliaro, Stefano Tornincasa, V. Vicentini
  págs. 542-551
- Surgical Planning in Shoulder Prostheseswith 3D Reconstruction and Customized 3DGuides
  C.M. Baño, Francisco Javier Abellán García, E. Melendreras, Beatriz Abellan Rosique
  págs. 552-563
- Combined Urban Furniture Designedby a Bio-Inspired Approach
  Dolores Parras Burgos, J. Hernández, J.S. Velázquez, Francisco Cavas Martínez, F. J. Cañavate, Daniel García Fernández-Pacheco
  págs. 564-572
- Tumor Reconstructive Surgery Assistedby Scale Models Using 3D Printing
  Dolores Parras Burgos, José Pablo Puertas García-Sandoval, C. Baño Pedreño, Francisco Cavas Martínez, Francisco José Fernández Cañavate, Daniel García Fernández-Pacheco
  págs. 573-582
- Eco-Ideation Workshops: Definitionand Requirements
  Ignacio López Forniés, Jorge José Sierra Pérez
  págs. 585-595
- Modular Design: Product DesignOpportunities and a Case Analysis
  Laura Asión Suñer, Ignacio López Forniés
  págs. 596-609
- Is the Design a Vector to be Consideredin the Agri-food Industry? An Interprofessional Analysisin Andalusia (Spain)
  Óscar González Yebra, Manuel Ángel Aguilar Torres, Fernando José Aguilar Torres
  págs. 610-621
- Description of Moisture Thermal Patternsin Concrete for the Thermal Inspection Methodby Infrared Thermography
  P. Cárdenas Del Campo, Francisco José Soto Lara, Manuel Damián Marín Granados
  págs. 622-631
- Joint Development of Video Mapping Contentson the Industrial and Cultural Heritageof Zaragoza (Spain)
  F.J. Galán Pérez, Anna Biedermann
  págs. 632-638
- Service Design and Sound: A Chancefor Exploration in Oncological TreatmentRooms
  Rosana Sanz Segura, Carlos Romero Piqueras, Eduardo Manchado Pérez, E. Özcan
  págs. 639-648
- Form and Function: Functional Optimizationand Additive Manufacturing
  L. Barbieri, F. Calzone, M. Muzzupappa
  págs. 649-658
- New Bottling Machine for Different Glass JarGeometries in Continuous Processes
  F. Cateura, José Sebastián Velázquez Blázquez, Francisco Cavas Martínez, Dolores Parras Burgos, F. J. F. Cañavate, J. Nieto
  págs. 659-669
- Moving Away from the Basic, Adopting a NewApproach to the Creative Process
  J.C. Quiñones Gómez
  págs. 670-679
- Proposal About the Introduction of the SoftSkills in the Teaching of Product Development
  Esther Rovira Garcia, G. Zafferri
  págs. 683-695
- Which Didactic Methodology Is the MostAppropriate for My Subject?
  J. López, I. Herrero, Pedro José Jimbert Lacha, Maider Iturrondobeitia Ellacuria, Nerea Toledo Gandarias
  págs. 696-704
- Integrated Approach to the Innovationof Technical Drawing Teaching Methods
  G. Baronio, Ileana Bodini, A. Copeta, Luca Dassa, Barbara Grassi, Ricardo Metraglia, B. Motyl, Diego Paderno, S. Uberti, V. Villa
  págs. 705-713
- Are We Training Our Novices TowardsQuality 2D Profiles for 3D Models?
  María Carmen González Lluch, Raquel Plumed Ferrer
  págs. 714-721
- An Analysis of Supervised Practical Workas a Didactic Methodology in the Subjectof Graphic Expression in Engineering
  Laura Diago Ferrer
  págs. 722-731
- Content Management Systemfor the Dissemination of Research Resultson Agustín de Betancourt’s HistoricalInventions
  José Ignacio Rojas Sola, Ángel I. Aguilera García
  págs. 732-741
- WebGL for the Dissemination of ResearchResults on Agustín de Betancourt’s HistoricalInventions
  José Ignacio Rojas Sola, Ángel I. Aguilera García
  págs. 742-750
- Free Software Usage in Subjectsof the Industrial Design and ProductDevelopment Engineering Degree
  N. Muñoz López, Anna Biedermann, Ana Serrano Tierz, J. Galán
  págs. 751-760
- Education for the Industry of the Future(IoF) with the 3D Experience Platform
  Valentín Gómez Jáuregui, F. Cue, Cristina Manchado del Val, C. Otero
  págs. 761-769
- A Guide for Learning Design Practice
  Rosana Sanz Segura, A. Fernández Vázquez, Eduardo Manchado Pérez, Ignacio López Forniés
  págs. 770-779
- Improving Spatial Abilitiesand Comprehension in Technical DrawingStudents Through the Use of InnovativeActivities and Augmented Reality
  Elena Olvera García, Manuel Damián Marín Granados, Francisco José Ortiz Zamora
  págs. 780-788
- Implementation of Learning by Doing Methodin the Graphical Engineering Field
  Manuel Damián Marín Granados, Elidia Beatriz Blázquez Parra, Patricia Mora Segado, Laia Miravet Garret, Francisco José Ortiz Zamora, Fernando Gómez Hermosa, Elena Olvera García
  págs. 789-797
- Project-Based Learning of CAD/CAE Toolsfor the Integrated Design of AutomaticMachines
  Giovanni Berselli, Paola Bilancia, Roberto Razzoli
  págs. 798-809
- Fostering Non-technical Skills for FutureEngineers: Labour Reality in the GraphicExpression Subject
  Nerea Toledo Gandarias, J. Lopez, Pedro José Jimbert Lacha, M. Iturrondobeitia, I. Herrero Durá
  págs. 810-824

Acceso de usuarios registrados

¿Olvidó su contraseña?

¿Es nuevo? Regístrese

Ventajas de registrarse

Dialnet Plus

Opciones de compartir

Opciones de entorno

Sugerencia / Errata

Coordinado por: