Stain & Finishing Oil (SFO) Product Description. Fusion's Stain & Finishing Oil (SFO) All in One does just as it says! It add color, and adds a sealing oil at the same time! This stain & top coat combo offers exceptional durability in high traffic areas like table tops, kitchen cabinets and even flooring. Can be used on bare wood, or over previously painted surfaces for a faux effect. Use the Natural color over Fusion Mineral Paint colors to increase the sheen and offer superior durability. Most colors now available in 2 sizes! Others coming soon! 8 fl. oz. (237 mL) - Coverage 40 -75 sq ft (depending on wood density) 31 fl. oz. (946 mL) - Coverage 150-300 sq ft (depending on wood density) With a combination of natural oils and resins that penetrate into the wood fibers to create a durable, scratch resistant and waterproof finish. It does not leave a surface film that sits on top, rather it soaks in and becomes part of your wood. It is ideal for wooden table tops as it has excellent resistance to abrasions and can be washed over and over again! With a combination of natural oils and resins that penetrate into the wood fibers to create a durable, scratch resistant and waterproof finish. It does not leave a surface film that sits on top, rather it soaks in and becomes part of your wood. It is ideal for wooden table tops as it has excellent resistance to abrasions and can be washed over and over again! Our Stain & Finishing Oil is composed of plant products, Safflower oil, Tung oil, Linseed oil, Vegetable wax, safe odorless mineral solvent and cobalt free siccative which means effective drying without toxic cobalt dryers while being low odor in comparison to traditional solvent based stains. Coverage. This is a highly concentrated oil blend so a little will go a long way! One 8 fl. oz. container covers 40-75 sq. ft ., and the 31 fl. oz. covers 150-300 sq. ft. , depending on wood density. This 8 oz container will cover what 1 Liter of comparable stains do on the market - giving you 2 to 3 times more coverage than any water-based stains. How to use. Stir, do not shake, before application. Sand the wood evenly with 100-120 grit sandpaper. Remove dust with a vacuum or lint-free-rag. Apply evenly using a brush or Fusion Applicator Pads. On raw wood, remove excess after 15-20 minutes. On Fusion surfaces, remove excess immediate. Re-coat after 9 hours, as any earlier will reactivate the stain. More coats increases durability, opacity, and sheen. Dry to the touch after approximately 9 hours. Ready for normal use after approximately 3 days. Cure time is 10 days, after which the surface can be cleaned with soap and water. Cleanup. Spills and tools should be cleaned with mineral spirits.