Details Details 34" High Steel Adjust-A-Gate Kits are ideal for 3' and 4' high wood gates, allowing pickets to rest near flush top and bottom rails, or with a slight overlap. Steel gate frame is approximately 3' high. 'Round up' if your gate width is close to width shown. Gates feature 1-1/4" steel galvanized and painted gate frames. Gate hardware is included. Gate hinges included in kit feature 5/8" pins, compatible with any of our other male hinges with 5/8" pin, including most within our chain link catalog. Consider and add alternate gate hardware for an assortment of other features such gates that open in and gates that open in and out. Gate kits may be mounted to round posts, masonry walls, and wood posts using different hardware. AG-60-36 Single Adjust-A-Gate Features: 2-Rail Gate Frame Kits. 34" High Steel Gate Frames. Gate Adjusts for 60"-96" Wide Opening. 1-1/4" galvanized steel square frame, .045" wall thickness. Powder coat finish ensures longer-lasting finish. Adjustable anti-sag diagonal truss cable. Hinges tested up to 3000 lbs. per hinge before bending. UPS shippable. Wood not included. These gate kits use a unique sleeve-system that allows the gate to be adjusted to fit the gate opening. Includes Hinges, Latch, and Hardware. WARNING: California's Proposition 65