Abstract
A large dual-polarization microstrip reflectarray with China-coverage patterns in two operating bands is designed. To sufficiently compensate for the spatial phase delay differences in two operating bands separately, a three-layer rectangular patch element is addressed, which is suitable for the large dual-polarization reflectarray. Due to the complexly shaped areas and high gain requirements, there are more than 25 000 elements in the reflectarray, making it difficult to design, due to more than 150 000 optimization variables. First, the discrete fast Fourier transform (DFFT) and the inverse DFFT are used to establish a one-to-one relationship between the aperture distribution and the far field, which lays a foundation for optimizing the shaped-beam reflectarray. The intersection approach, based on the alternating projection, is used to obtain the desired reflection phases of all the elements at some sample frequencies, and a new method for producing a suitable initial solution is proposed to avoid undesired local minima. To validate the design method, a dual-polarization shaped-beam reflectarray with 7569 elements is fabricated and measured. The measurement results are in reasonable agreement with the simulation ones. Then, for the large broadband reflectarray with the minimum differential spatial phase delays in the operating band, an approach for determining the optimal position of the feed is discussed. To simultaneously find optimal dimensions of each element in two orthogonal directions, we establish a new optimization model, which is solved by the regular polyhedron method. Finally, a dual-band dual-polarization microstrip reflectarray with 25 305 elements is designed to cover the continent of China. Simulation results show that patterns of the reflectarray meet the China-coverage requirements in two operating bands, and that the proposed optimization method for designing large reflectarrays with complexly shaped patterns is reliable and efficient.
Similar content being viewed by others
References
Arrebola M, Encinar JA, Barba M, 2008. Multifed printed reflectarray with three simultaneous shaped beams for LMDS central station antenna. IEEE Trans Antenn Propag, 56(6):1518–1527. https://doi.org/10.1109/TAP.2008.923360
Bucci O, Franceschetti G, 1990. Intersection approach to array pattern synthesis. IEE Proc H Microw Antenn Propag, 137(6):349–357. https://doi.org/10.1049/ip-h-2.1990.0064
Carrasco E, Barba M, Encinar JA, et al., 2013. Design, manufacture and test of a low-cost shaped-beam reflectarray using a single layer of varying-sized printed dipoles. IEEE Trans Antenn Propag, 61(6):3077–3085. https://doi.org/10.1109/TAP.2013.2254431
Chaharmir MR, Shaker J, 2008. Broadband reflectarray with combination of cross and rectangle loop elements. Electron Lett, 44(11):658–659. https://doi.org/10.1049/eL20080910
Chaharmir MR, Shaker J, Legay H, 2009. Broadband design of a single layer large reflectarray using multi cross loop elements. IEEE Trans Antenn Propag, 57(10):3363–3366. https://doi.org/10.1109/TAP.2009.2029600
Clark RH, Brown J, 1980. Diffraction Theory and Antennas. Halsted Press, New York, USA. https://doi.org/10.1016/0029-8018(81)90030-5.
Encinar JA, Zornoza JA, 2004. Three-layer printed reflectarrays for contoured beam space applications. IEEE Trans Antenn Propag, 52(5):1138–1148. https://doi.org/10.1109/TAP.2004.827506
Encinar JA, Datashvili LS, Zornoza JA, et al., 2006. Dualpolarization dual-coverage reflectarray for space applications. IEEE Trans Antenn Propag, 54(10):2827–2837. https://doi.org/10.1109/TAP.2006.882172
Encinar JA, Arrebola M, Fuente LDL, et al., 2011. A transmitreceive reflectarray antenna for direct broadcast satellite applications. IEEE Trans Antenn Propag, 59(9):3255–3264. https://doi.org/10.1109/TAP.2011.2161449
Jiao YC, Wei WY, Huang LW, et al., 1993. A new low-side-lobe pattern synthesis technique for conformal arrays. IEEE Trans Antenn Propag, 41(6):824–831. https://doi.org/10.1109/8.250466
Pozar DM, 2007. Wideband reflectarrays using artificial impedance surfaces. Electron Lett, 43(3):148–149. https://doi.org/10.1049/el:20073560
Pozar DM, Targonski SD, Pokuls R, 1999. A shaped-beam microstrip patch reflectarray. IEEE Trans Antenn Propag, 47(7):1167–1173. https://doi.org/10.1109/8.785748
Prado DR, Arrebola M, Pino MR, et al., 2017. Efficient crosspolar optimization of shaped-beam dual-polarized reflectarrays using full-wave analysis for the antenna element characterization. IEEE Trans Antenn Propag, 65(2):623–635. https://doi.org/10.1109/TAP.2016.2633950
Rahmat-Samii Y, Michielssen E, 1999. Electromagnetic optimization by genetic algorithms. Microw J, 42(11):232–232.
Rahmat-Samii Y, Cramer P, Woo K, et al., 1981. Realizable feed-element patterns for multibeam reflector antenna analysis. IEEE Trans Antenn Propag, 29(6):961–963. https://doi.org/10.1109/TAP.1981.1142678
Robinson J, Rahmat-Samii Y, 2004. Particle swarm optimization in electromagnetics. IEEE Trans Antenn Propag, 52(2):397–407. https://doi.org/10.1109/TAP.2004.823969
Vacchione JD, 1990. Techniques for Analyzing Planar, Periodic Frequency Selective Surface Systems. PhD Thesis, University of Illinois at Urbana-Champaign, Illinois, USA.
Wu GB, Qu SW, Wang YX, et al., 2018. Nonuniform FSS-backed reflectarray with synthesized phase and amplitude distribution. IEEE Trans Antenn Propag, 66(12):6883–6892. https://doi.org/10.1109/TAP.2018.2871752
Yu A, Yang F, Elsherbeni AZ, et al., 2009. A single layer broadband circularly polarized reflectarray based on the element rotation technique. IEEE Antennas and Propagation Society Int Symp, p.1–4. https://doi.org/10.1109/APS.2009.5171594
Zhang L, Cui Z, Jiao YC, et al., 2009. Broadband patch antenna design using differential evolution algorithm. Microw Opt Technol Lett, 51(7):1692–1695. https://doi.org/10.1002/mop.24423
Zhou M, Sørensen SB, Kim OS, et al., 2013. Direct optimization of printed reflectarrays for contoured beam satellite antenna applications. IEEE Trans Antenn Propag, 61(4):1995–2004. https://doi.org/10.1109/TAP.2012.2232037
Zhou M, Sørensen SB, Kim OS, et al., 2014. The generalized direct optimization technique for printed reflectarrays. IEEE Trans Antenn Propag, 62(4):1690–1700. https://doi.org/10.1109/TAP.2013.2254446
Zhou M, Borries O, Jørgensen E, 2015. Design and optimization of a single-layer planar transmit-receive contoured beam reflectarray with enhanced performance. IEEE Trans Antenn Propag, 63(4):1247–1254. https://doi.org/10.1109/TAP.2014.2365039
Author information
Authors and Affiliations
Corresponding author
Additional information
Contributors
Gang ZHAO designed the research. Gang ZHAO and Guan-tao CHEN processed the data. Gang ZHAO wrote the first draft of the manuscript. Yong-chang JIAO and Guan-tao CHEN helped organize the manuscript. Gang ZHAO and Yong-chang JIAO revised and edited the final version.
Compliance with ethics guidelines
Gang ZHAO, Yong-chang JIAO, and Guan-tao CHEN declare that they have no conflict of interest.
Project supported by the National Key Research and Development Program of China (No. 2017YFB0202102)
Rights and permissions
About this article
Cite this article
Zhao, G., Jiao, Yc. & Chen, Gt. Optimal design of a large dual-polarization microstrip reflectarray with China-coverage patterns for satellite communications. Front Inform Technol Electron Eng 21, 159–173 (2020). https://doi.org/10.1631/FITEE.1900496
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/FITEE.1900496