Processing math: 0%
Droop-Controlled Rectifiers That Continuously Take Part in Grid Regulation | IEEE Journals & Magazine | IEEE Xplore

Droop-Controlled Rectifiers That Continuously Take Part in Grid Regulation


Abstract:

In this paper, a generic framework for a rectifier to continuously take part in the regulation of grid voltage and frequency is proposed. It can automatically change the ...Show More

Abstract:

In this paper, a generic framework for a rectifier to continuously take part in the regulation of grid voltage and frequency is proposed. It can automatically change the power consumed to support the grid, without affecting the normal operation of the load. Such a rectifier has a built-in storage port, in addition to the normal ac and dc ports. The flexibility required by the ac port to support the grid is provided by the storage port without affecting the dc port. The grid support of the ac port is achieved through the recently proposed universal droop controller (UDC). A dc-bus voltage controller cascaded to the UDC is proposed to regulate the dc-bus voltage of the storage port within a wide range so as to provide the flexibility needed, while the dc-port voltage is maintained constant. An illustrative example is presented with the recently proposed \theta-converter, which consists of three ports with only four switches. Experimental results are provided to verify the capability of the rectifier to regulate the grid voltage and frequency without affecting the load.
Published in: IEEE Transactions on Industrial Electronics ( Volume: 66, Issue: 8, August 2019)
Page(s): 6516 - 6526
Date of Publication: 13 August 2018

ISSN Information:


References

References is not available for this document.