Suzuki M engine

Suzuki M engine
Overview
Manufacturer	Suzuki
Layout
Configuration	Naturally aspirated Inline-4
Displacement	1.3 L (1,328 cc) 1.5 L (1,490 cc) 1.6 L (1,586 cc) 1.8 L (1,796 cc)
Cylinder bore	78 mm (3.07 in) 83 mm (3.27 in)
Piston stroke	69.5 mm (2.74 in) 78 mm (3.07 in) 83 mm (3.27 in)
Cylinder block material	Aluminum
Cylinder head material	Aluminum
Valvetrain	DOHC 4 valves x cyl. with VVT
Valvetrain drive system	Timing Chain
Compression ratio	9.5:1, 9.6:1, 9.7:1, 10.3:1, 10.5:1, 11.0:1, 11.1:1
RPM range
Max. engine speed	7200 rpm
Combustion
Fuel system	Multi-point fuel injection
Fuel type	Gasoline
Oil system	Wet sump
Cooling system	Water-cooled
Output
Power output	83.8–134 hp (62.5–99.9 kW)
Torque output	110–190 N⋅m (81–140 lb⋅ft)

The Suzuki M engine family is a line of automobile engines from Suzuki. Ranging in displacement from 1.3 L to 1.8 L, it is a modern engine line with dual overhead cams, 16 valves, and multi-point fuel injection (MPFI). Fully developed in-house following Suzuki's separation from General Motors, the M engine replaced the long-lived G engine family.

M13A

The M13A displaces 1.3 L (1,328 cc); bore and stroke is 78 mm × 69.5 mm (3.07 in × 2.74 in). It has a 9.5:1 compression ratio and two variants:

• with variable valve timing (VVT) valvetrain
• without VVT (Suzuki Jimny, Suzuki Ignis, Suzuki Liana) in select markets.

Automobile	Power	Torque	Notes
Jimny	85 PS (63 kW) at 6,000 rpm	110 N⋅m (81 lb⋅ft) at 4,100 rpm
Swift	92 PS (68 kW) at 5,800 rpm	116 N⋅m (86 lb⋅ft) at 4,200 rpm	VVT

• M13A — VVT
  • Suzuki Ignis (first generation)
  • 1999–2010 Wagon R Solio 1.3
  • 2000–2018 Suzuki Jimny Wide/Sierra
  • Suzuki Swift (First generation)

M13AA

The M13AA is an automotive engine manufactured by Suzuki Motor Corporation. The M13AA is a 1.3 L (1,328 cc) inline-four cylinder, 16 valve VVT engine used in the Suzuki Jimny, Suzuki Swift & Suzuki Ignis from 2005.

1.3 M13AA 1.3 L (1,328 cc) DOHC 16v MPFI VVT (Jimny)

• Bore x Stroke 78 mm × 69.5 mm (3.07 in × 2.74 in)
• Compression Ratio 9.5:1
• 85 PS (63 kW) at 6000 rpm, 110 N⋅m (81 lb⋅ft) at 4100 rpm

M15A

The M15A displaces 1.5 L (1,490 cc); bore is and stroke 78 mm × 78 mm (3.07 in × 3.07 in). This engine has a variable valve timing valvetrain. With a 9.5:1 compression ratio, it produces 100 PS (74 kW) at 5,900 rpm and 133 N⋅m (98 lb⋅ft) at 4,100 rpm. The M15A used in the Suzuki Ignis (HT81S) has a higher compression ratio of 11.0:1, and produces 112 PS (82 kW) at 6400 rpm and 143 N⋅m (105 lb⋅ft) at 4100 rpm.

(Ignis)

• Compression Ratio 11.0:1
• 112 PS (82 kW) at 6400 rpm, 105 lb⋅ft (142 N⋅m) at 4100 rpm

(Swift/SX4 )

• Compression Ratio 9.5:1
• 100 PS (74 kW) at 5900 rpm, 133 N⋅m (98 lb⋅ft) at 4100 rpm

(S-Cross - Indonesian Version)

• Compression Ratio 10.3:1
• 80 kW (109 PS) at 6000 rpm, 138 N⋅m (102 lb⋅ft) at 4400 rpm

Application:

• 2001–2007 Suzuki Aerio/Liana/Baleno (North America)
• 2001–2008 Suzuki Ignis/Ignis Sport (first generation)
• 2004–2010 Suzuki Swift - 2nd generation
• 2006–2013 Suzuki SX4
• 2016–2022 Suzuki S-Cross (Indonesia)

M16A

The M16A displaces 1.6 L (1,586 cc). Bore is and stroke 78 mm × 83 mm (3.07 in × 3.27 in). This engine has a DOHC variable valve timing valve train and a multipoint injection system. The engine had many iterations, depending on the car in which it was installed and the intended use of the car. The M16A engine uses a chain cam instead of a cam belt. General dimensions:

1.6L (Liana)

• 2001–2004
• compression ratio: 9.7:1
• Maximum output: 76 kW (103 PS) at 5,500 rpm
• Maximum torque: 144 N⋅m (106 lb⋅ft) at 4000 rpm

1.6L

• 2004–2007
• compression ratio:10.5:1
• Maximum output: 79 kW (107 PS) at 5,500 rpm
• Maximum torque: 144 N⋅m (106 lb⋅ft) at 4000 rpm

1.6L VVT

• compression ratio: 10.5 - 11.1:1
• Maximum output: 75–79 kW (102–107 PS) at 5,600 rpm
• Maximum torque: 145–156 N⋅m (107–115 lb⋅ft) at 4400 rpm

1.6 M16A MPFI VVT (SX4 Hatchback 2WD/4WD - Europe)

• Compression Ratio 11.0:1
• 120 PS (88 kW) at 6000 rpm
• 156 N⋅m (115 lb⋅ft) at 4400 rpm

1.6 M16A MPFI VVT (SX4 S-Cross 2wd or 4wd)

• Compression Ratio 11.0:1
• Maximum output: 100 kW (136 PS) at 6000 rpm
• Maximum torque: 156 N⋅m (115 lb⋅ft) at 4400 rpm

1.6 M16A MPFI VVT (Swift Sport 2005-2011)

• Compression Ratio 11.1:1
• 125 PS (92 kW) at 6800 rpm, 148 N⋅m (109 lb⋅ft) at 4800 rpm

1.6 M16A MPFI VVT (Swift Sport 2011 - 2014)

• Compression Ratio 11.1:1
• 100 kW (136 PS) at 6900 rpm, 160 N⋅m (118 lb⋅ft) at 4400 rpm
• Redline: 7200 rpm

1.6 M16A (fourth generation Vitara 2015+)

• Compression ratio 11.0:1
• Max power: 120 PS (88 kW) at 6,000 rpm
• Max torque: 156 N⋅m (115 lb⋅ft) at 4,400 rpm

Application:

• Suzuki SX4 S-Cross
• Suzuki Grand Vitara
• Fiat Sedici
• Suzuki Liana 109 PS (80 kW)
• Suzuki SX4 107–120 PS (79–88 kW)
• Suzuki Vitara LY
• Suzuki Swift Sport, 2nd and 3rd generations

M18A

The M18A is based on the M16A, with a larger bore. It is the only M-series engine to use a different bore. It displaces 1.8 L (1,796 cc); bore and stroke is 83 mm × 83 mm (3.27 in × 3.27 in). This engine has a variable valve timing valvetrain. With a 9.6:1 compression ratio, it produces 125 PS (92 kW) at 5,500 rpm and 170 N⋅m (125 lb⋅ft) at 4,200 rpm.

Due to the engine block being based on the same casting, a M16A cylinder head can be bolted onto a M18a shortblock with minor modifications. This has been done by tuners, by installing a M18A block with the stock internals (crank, pistons and rods) in a Suzuki Swift Sport, in order to have more torque on the whole rev band.

Application:

• Suzuki Aerio (Aust. & N.Z.)
• Suzuki Liana GS 2004 (Australia & N.Z.) 125 PS (92 kW)
• 2009-2012 Suzuki SX4 (China) 131 PS (96 kW)