Over sized forged door pull. Perfect for use on interior sliding barn doors. A very popular choice for commercial establishments , restaurants and residential purposes alike. Hand forged by Vermont Blacksmith Molly Petraska, 100% by hand from start to finish. -Handle is made with hand hammered 5/8" square mild steel. Both ends are heated and "upset" to give the handle a true handmade look and feel. -The square mounting plates measure 2x2" and are also hand hammered. Available in 10,12",16" or 20" overall length. 2 1/4" overall projection . 16" or larger recommended for standard sliding barn doors. A 16" handle in natural iron finish is pictured. Natural iron finish with linseed oil. The natural iron is similar to a pewter color, with lighter silver like highlights throughout. This finish matches "raw steel" tracks very well. At this time I do not make the sliding track hardware. Also available in a solid flat black. The black finish tends to "hide" some of the hammer marks. These handles are surface mount unless otherwise requested. 1/4" by 1" square head decorative lag bolts provided for installation. These handles are intended for interior use. If wanting to use outdoors, a clear exterior polyurethane can be applied for the natural iron finish. The flat black and oil rubbed bronze finishes can be used exteriorly. Please note that regardless of finish, a dark rusted patina may develop overtime as any iron product used outdoors would. Since each is made by hand, there may be some slight variations. **PLEASE NOTE: Each item is made to order by myself (Molly Petraska). Since I am a one-woman business, stated lead times may vary, sometimes taking longer than expected. If there are time constraints , please contact me prior to ordering to ensure I can produce and ship within required time frame. The customer always has the option to cancel for extended lead times.