Feel the hate thread
Comments
-
I believe this was posted in the 'post a photo' thread at some point, but it seems apropos here, too.
-
I hate painting a room and realizing I forgot to remove the lint from the roller, and now I have to individually pick the lint off of the wall which dried in (the stuff I didn't pick off while painting) before applying the second coat. And then I realized that I did 3 walls perfectly but the fourth was a little too thin.My gear:
- Onyko TX-NR656
- RT3000p L&R
- CS1000p Center
- RT35 Side
- RT35 Rear
-
I hate the search feature here.Don't take experimental gene therapies from known eugenicists.
-
I hate being told I must be a bot in my first posts here. But at least I'm not a post ****.
-
Good to know that you're still salty about that.
-
It is miserable -- so I usually just use google to search this forum.I hate the search feature here.
-
Yup. Me too. Much easier.
Tom~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~ -
I hate painting a room and realizing I forgot to remove the lint from the roller, and now I have to individually pick the lint off of the wall which dried in (the stuff I didn't pick off while painting) before applying the second coat. And then I realized that I did 3 walls perfectly but the fourth was a little too thin.
Okay the second coat seems to have made the wall look essentially flawless though there are still minor imperfections.
Ironically, it looks better than the paint job done by the contracted painters in '08 when they built the house. So I'll take that one with prideMy gear:- Onyko TX-NR656
- RT3000p L&R
- CS1000p Center
- RT35 Side
- RT35 Rear
-
Now I hate uneven subfloor seamsMy gear:
- Onyko TX-NR656
- RT3000p L&R
- CS1000p Center
- RT35 Side
- RT35 Rear
-
I hate being told I must be a bot in my first posts here. But at least I'm not a post ****.
Searching for snarky reply that will not get me banned.... nope, I got nuthin'.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2800 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
How many flies need to be buzzing a dead horse before you guys stop beating it? -
~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
-
Now I hate uneven sub
Yeah I've been going to town but I think it's just swelling on the edges or the OSB so it should be a quick and easy fix. Thankfully it doesn't look like I'll need underlayment.My gear:- Onyko TX-NR656
- RT3000p L&R
- CS1000p Center
- RT35 Side
- RT35 Rear
-
Now I hate uneven sub
Yeah I've been going to town but I think it's just swelling on the edges or the OSB so it should be a quick and easy fix. Thankfully it doesn't look like I'll need underlayment.
I would use underlayment if I were doing that job, it's not that expensive and it will be a better job. -
Now I hate uneven sub
Yeah I've been going to town but I think it's just swelling on the edges or the OSB so it should be a quick and easy fix. Thankfully it doesn't look like I'll need underlayment.
I would use underlayment if I were doing that job, it's not that expensive and it will be a better job.
I was going to but I managed to flatten it in about an hour with a sander, some screws, and sinking the protruding nails. Half the floor is installed and it's perfectly flat. Starting on the other half very soon.My gear:- Onyko TX-NR656
- RT3000p L&R
- CS1000p Center
- RT35 Side
- RT35 Rear
-
Main Rig:
Krell KAV 250a biamped to mid/highs
Parasound HCA1500A biamped to lows
Nakamichi EC100 Active xover
MIT exp 1 ic's
Perreaux SA33 class A preamp
AQ kingcobra ic's
OPPO 83 CDP
Lehmann audio black cube SE phono pre, Audioquest phono wire (ITA1/1)
Denon DP-1200 TT. AToc9ML MC cart.
Monster HTS 3600 power conditioner
ADS L1590/2 Biamped
MIT exps2 speaker cable -
I hate the search feature here.
I also hate the auto-correct here too. I think it taunts you.Don't take experimental gene therapies from known eugenicists. -
It was you, wasn’t it?
Brian
One-owner Polk Audio RTA 15TL speakers refreshed w/ Sonicap, Vishay/Mills and Cardas components by "pitdogg2," "xschop" billet tweeter plates and BH5 | Stereo REL Acoustics T/5x subwoofers w/ Bassline Blue cables | Rogue Audio Cronus Magnum III integrated tube amp | Technics SL-1210G turntable w/ Ortofon 2M Black LVB 250 MM cart | Teac VRDS-701T CD transport | LampizatOr Baltic 4 tube DAC | Nordost & DH Labs cables/interconnects | APC H15 Power Conditioner | GIK Acoustics room treatments | Degritter RCM -
-
Thank god they weren't wrong time bass port exhaust expellers
-
They called this guy into the boss's office afterward and Schiit-canned him for it.
I was not aware you worked there. Can you get us a discount?
https://youtu.be/Be886Ezi30g?t=18