Jump to text
On this page
Copy and source
Published source confirmed at last check

Source changed 2026-11-18 21:11:39 UTC · snapshot created 2026-11-18 21:12:35 UTC · last check 2026-11-18 22:30:10 UTC

A.4:9 - SoTA-Echoing

Practice question. How can an operating observation answer a design question while preserving the selected requirement, comparable conditions and a separate decision about what to change?

First identify what the comparison is meant to establish, then apply an explicit decision rule. The distinction in the NASA Systems Engineering Handbook, Rev. 2, NASA/SP-2016-6105, §2.4 is useful here: compliance with specified requirements and suitability for intended use in the intended environment answer different questions. This supports §4 steps 1–3: a passed flow requirement is not by itself proof of operational suitability. NASA’s wider life-cycle process is outside this bounded method; its source role here is the separation of comparison purposes.

For a quantitative requirement near a measurement limit, the competing answers are simple acceptance and guarded acceptance. JCGM 106:2012, §§8.2–8.3 supplies both: simple acceptance compares the measured value directly with the tolerance; guarded acceptance narrows the acceptance region to reduce false acceptance. The former is a suitable choice when the parties accept its risk and the measurement uncertainty is adequate for their purpose. The latter can cost more false rejections. Neither changes the specified tolerance itself.

Apply that comparison in §4 steps 2–4: retain the applicable rule and its uncertainty basis instead of silently treating every point estimate as decisive. Where the receiving use requires protection against false acceptance, guarded acceptance is the better answer at comparable effort when the uncertainty estimate is already available. Where that extra protection is unnecessary, reuse a sufficient simple comparison. Avoid automatically tightening the rule or weakening the requirement merely because the result is inconvenient.

The exact-value pump comparison in §5.1 needs no extra uncertainty calculation. In a separate constructed variant, the available estimate is 105 L/min, its justified coverage interval is 97–113 L/min, and the minimum requirement remains 100 L/min. Simple acceptance accepts the point value. A selected rule requiring the entire interval to satisfy the minimum withholds acceptance because 97 < 100. Both use the same observation; the second result does not establish that the pump delivers less than 100. This is why step 4 distinguishes an evidential limit from an established discrepancy, and step 5 leaves any response to its own authority.

Reopen the chosen rule if the uncertainty or condition-translation basis changes, or the receiving use changes the tolerated decision risk. If the selected account instead contains a descriptive prediction, return to step 2 and recover its prediction-comparison rule; a conformity-assessment source does not authorize recalibrating the prediction or revising a requirement.