Jump to text
On this page
Copy and source
Published source confirmed at last check

Source changed 2026-11-18 21:11:39 UTC · snapshot created 2026-11-18 21:12:35 UTC · last check 2026-11-18 22:20:20 UTC

A.0:7 - Conformance Checklist (SCR/RSCR stubs)

IDRequirementPurpose
CC‑A0‑1If a pattern/UTS row describes a generator, selector, typed portfolio publication, or set-return publication surface, it MUST surface the glossary values and policies used by its operation or independently required by the receiving use, with their applicable units, scale, polarity, ReferencePlane and policy‑ids.Makes generative claims comparable and auditable (UTS as publication surface).
CC‑A0‑2For QD/OEE, pin the editions and policy‑ids used by the operation or required by the receiving use, including DescriptorMapRef.edition, DistanceDefRef.edition, the CharacteristicSpaceRef with its separate characteristicSpaceDescriptionRef: U.EpistemeRef under A.19:5.1.1.1 and TransferRulesRef.edition where applicable. Log PathSliceId when required; follow G.9’s pin requirements for a parity use.Enables admissible parity and refresh; edition-aware telemetry.
CC‑A0‑3No mixed‑scale roll‑ups; ordinal data SHALL NOT be averaged; any roll‑up MUST live under a declared CG‑frame.Prevents illegal scoring; keeps comparisons lawful.
CC‑A0‑4Where the G‑kit requires parity, publish an Illumination Map (coverage per niche); single‑number leaderboards are non‑conformant on the Core surface when a ParityReport is required.Declared-set-first / typed portfolio-publication posture; avoids single‑winner bias.
CC‑A0‑5Keep illumination/coverage as report‑only telemetry; dominance policy defaults to ParetoOnly; any change is CAL‑authorised and cited by policy‑id.Separates fit from exploration; preserves auditability.
CC‑A0‑6Apply E.7/E.8: include a U.System and a U.Episteme illustration when claiming generative behaviour; obey E.10 register hygiene; use the subsection title “Archetypal Grounding.”Locks didactic primacy; prevents jargon drift.
CC-A0-7ReferencePlane declared for every reported N/U/C/Diversity_P head. For a plane relation, retain its source/target planes and basis under G.Core:4.2.3; cite CL^plane for a used or required calibration and the Φ_plane policy and loss model for a used or required loss calculation. Numerical assurance penalties follow an applicable B.3 model.Prevents plane/stance category errors while preserving applicable crossing and receiving-use grounds.
CC‑A0‑8Diversity_P ≠ Illumination. Diversity_P measures the retained set; DeltaDiversity_P measures a candidate’s marginal contribution to it. Either requires a declared PromotionPolicy before entering dominance. Illumination remains report‑only telemetry unless explicitly promoted by a CAL-authorized policy-id.Matches QD triad semantics and parity defaults.
CC‑A0‑9For a generator or selector scale-behaviour claim, declare the scale variables S and the settings or range the claim covers. Cite the E/E-LOG scale policy-id when the claim or its use depends on a policy, for example a knee threshold or selection by class. A prediction from a model states the assumptions of the derivation. Mark S = N/A when no scale-behaviour claim is made.Identifies what varies and the grounds for the asserted response.
CC‑A0‑10For an empirical scale-behaviour claim, identify the compared settings, response, conditions and uncertainty. Use an applicable probe or obtain the missing evidence when the claim is needed. Report the class supported under C.18.1. With only one setting, report the result there and leave the trend open. Use a UTS row when F.17 calls for one.Makes the grounds for the scale claim recoverable, including when classification remains open.
CC‑A0‑11Apply Iso‑Scale Parity in parity runs when S is declared; where infeasible, state the loss notes and treat results as non‑parity. For a penalty calculated or required by the receiving use, cite its model and policy; numerical assurance penalties require an applicable B.3 model.Keeps comparisons fair and auditable under scale constraints.
CC‑A0‑12Record a BLP-waiver only when overriding a declared generality preference that would otherwise decide the use. Apply C.19.1’s governed grounds: admissibility override, parity-supported scale-probe overturn, or non-blocking complementary bias. Bounded specialization alone requires no waiver.Makes a policy override transparent without imposing one on ordinary bounded tactics.