Jump to text
On this page
Copy and source
Published source confirmed at last check

Source changed 2026-11-18 21:11:39 UTC · snapshot created 2026-11-18 21:12:35 UTC · last check 2026-11-18 22:35:10 UTC

A.22:4 - Solution

Select U.Structure as the A.22 ontic head: a dependent, non-agentive organization selected from independently identified constituents and obtaining relation occurrences under applied constraints for one named use frame.

The constituents keep their identities and kinds. Every selected relation occurrence must already satisfy its defining predicate and retain identity under that predicate’s occurrence rule. A system or practitioner selects their organization; A.22 supplies the identity and boundary rule for that selected organization.

The applied constraints are the constraint claims used in the selection judgment, not the identity of the document, table, rule card, or constraint episteme that carries them. A usable frame states the question, admissible action, and stop or return condition. A generic phrase such as “current use” or “appropriate structure” is not a use frame. Any optional explanatory overread follows F.19:4’s plausible-reader test and remains outside structure identity.

Ordinary structure selection needs the four discriminators below. An account of dated selection Work additionally uses its admission grounds; a durable result episteme, operation binding, direct participation relation or decision also retains its identity outside the structure.

A diagram, graph, table, model, description, view, or publication may designate, represent, or describe the selected organization and its already identified constituents. Use C.2.1 for the describing episteme, E.17.0 for claimed view membership, and the publication or source-use patterns for those claims. Use C.29 when a mathematical representation-choice, transfer, or reliance question remains unresolved; the participant and relation predicates remain the obtaining basis.

A.22:4.1 - Base U.Structure Identity and Selection

For a selected structure S, recover four identity discriminators:

StructureIdentity(S) = <
  independently identified constituents,
  selected obtaining relation occurrences,
  constraints as applied,
  one named selection-use frame
>

Base U.Structure identity has no ambient context field. A bounded-context label, U.ContextSlice, U.ClaimScope, project record, description, view, graph, table, or publication is not automatically an additional discriminator. If a scope is referenced by an applied constraint, that constraint contributes through the third discriminator. If a model-use structure is independently selected as a constituent of another structure, it contributes through the first discriminator.

The first discriminator is a plurality, not a graph node set created by notation. A separately useful C.13 collection may designate the same constituents, but collection membership neither proves parthood nor replaces their identities. The second discriminator contains the relation occurrences chosen for this organization; a relation name, edge label, tuple position, or adjacency row is insufficient. The third contains the semantic constraints applied; changing only the rationale, formatting, or publication of an unchanged constraint claim does not change this discriminator. The fourth names the use question, admissible action, and stop or return condition.

Two references resolve to the same U.Structure when all four discriminators resolve to the same values. A changed designator, selecting system, method, work occurrence, result episteme, description, graph, representation language, view, or publication leaves the structure unchanged when the four discriminators remain unchanged. Replacing a constituent, a selected relation occurrence, an applied constraint, or the named use frame can identify another structure.

If a relation occurrence may have been reidentified, apply its relation pattern before reapplying A.22. A change to an explanatory guard alone does not change identity. If its content changes an applied constraint or a frame value, compare that existing discriminator.

If no current predicate definition, applicability condition, or occurrence rule can identify the required constituent or test the obtaining-relation claim for this use, stop at the description or representation and return missing-governor. If the governor exists and the available case basis is sufficient to apply its positive test but that test fails, return factually unsupported; if a fact needed to decide the test is unavailable, return missing-information.

State a negative only when an applicable non-obtaining criterion or complete closure basis and satisfying facts establish it. If the constraints or named use frame are absent, name that gap: the material may show an arrangement, but it does not yet support the claimed selected U.Structure.

For asserted dated selection Work, first establish the A.13 core: the performing System, local agential-role kind and membership criterion, and an obtaining assignment of its declared direct species for the relevant scope and time. A.15.1 independently admits the performance with its enacted Method and extent; F.6 applies afterward only for assignment-bound attribution. Establish any direct participation or A.6.1 operation binding needed by the receiving claim separately.

The following two records are recovery aids, not new ontic kinds. In SelectedStructureBasis, the selected structure, constituents, selected obtaining relations, applied constraints, and use frame state identity; the preserved/lost and action/stop rows state the use-return boundary rather than adding identity fields.

SelectedStructureBasis:
  selectedStructureRef:
  constituentRefs:
  selectedObtainingRelationOccurrenceRefs:
  appliedConstraintClaimRefs:
  namedSelectionUseFrame:
  preservedStructure:
  lostHiddenOrExcludedStructure:
  admissibleAction:
  stopOrNonAdmissibleUse: stop or return condition
  groundedNonAdmissibleUse?:

StructureSelectionUse:
  selectingSystemRef:
  selectionMethodRef:
  selectionWorkRef:
  directParticipationOrOperationBindingRefs?, when the receiving claim needs them:
  selectedStructureRef:
  selectionResultEpistemeRef?, when the judgment must persist:
  selectionDecisionRef?, when an accountable choice is current:

StructureSelectionUse is used when that dated performance is asserted; it records how the system performed the selection and reached the judgment. SelectedStructureBasis records the four identity discriminators plus the use-return boundary. Do not copy the system, work, method, result episteme, or decision into the structure basis.

A U.ClaimScope, effective reference scheme, or model-use structure that merely qualifies a claim about either record does not enter base identity. A scope referenced by an applied constraint or a model-use structure selected as a constituent enters only through that already declared discriminator. stopOrReturnCondition is another name for stopOrNonAdmissibleUse, not an independently filled value.

A.22 structure-aspect names such as functional, mereological, modular, transformation-flow, control, semantic, causal, dynamical, algebraic, topological, geometric, or coarse-grained remain cues for which relations and constraints to recover. They do not identify a structure without the four discriminators. C.30.ASV ArchitectureStructureKindRef values remain architecture-local classifiers; a matching label does not imply identity.

A.22:4.1a - Auxiliary boundary

Use description, publication, source-use, evidence, work, gate, decision, release, architecture-description, and mathematical-lens patterns when those claims are being made. The A.22 application contains the selected-structure portion and any structure-use return condition required by §4.5; use each neighboring pattern only for the definition or test it contributes. A publication, diagram, graph, table, dashboard, file, model card, generated representation, or lens output may make a structural description or view available; it does not become the selected structure or supply neighboring claim authority by appearance.

A.22:4.1b - Constraint-governed unfolding structure

Use A.22.CGUS to clarify available continuations and their conditions. Use its formal branch when the named use depends on the identity or CGUS membership of the selected organization. Then identify one A.22 structure with several locally declared loci whose bindings identify the independently selected constituents for the unfolding question; its selected obtaining relation occurrences and applied constraint claims must define at least two potential continuations across allowed cases. The loci are not free-standing A.6.5 slots. A separate case- and time-indexed result may enable zero, one, or several candidates. This specialization remains U.Structure; a Method, plan, Work or present-case continuation result is a separate object.

A route card, table, graph, README entry, narrative, slide, or happy-path example may describe or demonstrate the unfolding structure, but it is not the structure itself.

A.22:4.1c - Bounded And Cross-Context Model-Use Structure Specializations

BoundedModelUseStructure is a U.Structure selected over one model episteme, admitted model-use holons, the obtaining model-applicability, actual model-use, and model-expression-coherence occurrences defined and tested by A.1.1, applied constraint claims used by the selection judgment, and one named bounded-model-use frame. Its A.22 identity uses exactly those constituents, selected occurrences, constraint claims, and frame.

A claim scope, membership outcome, boundary display, or carrier is not an applied constraint by itself; a constraint claim may instead state a proposition about that scope or its A.2.6 membership predicate. No boundary crossing participates in that identity.

Continuity across model editions additionally requires the C.2.1 episteme-edition relation and declared A.1.1 continuity rule. BoundedModelUseStructure is not a holon, description, view, or endpoint manufactured by a later crossing.

CrossContextRelationStructure is a conditional specialization of a different already identified U.Structure. Membership requires obtaining crossing occurrences that satisfy independently defined predicates, selected among several bounded model-use structures, applied constraints, and one named crossing-analysis use, with all four A.22 base discriminators established.

Until a compatible crossing predicate and current facts establish those occurrences, a Context Map can describe only a proposed crossing organization and no positive CrossContextRelationStructure member is asserted. The selecting system and its work remain separate. Sharing a participant does not merge structures, and overlap does not prove parthood.

CrossContextRelationStructure is a provisional A.22-local designator for this conditional membership rule.

DDD Context Mapping names a repeatable way of constructing a Context Map; a U.Method claim uses A.3.1. When a mapping plan is needed, use A.15.2. An asserted dated mapping Work uses the complete admission grounds in §4.1; assignment-bound attribution additionally uses F.6.

C.2.1 identifies the resulting Context Map episteme independently. While crossing occurrences or the four structure discriminators are missing, its EntityOfConcern is the proposed or described organization. Once both are established, an episteme may designate the selected structure. It is additionally a U.View only when E.17.0 establishes EpistemeViewpointConformanceRelation(E, P). Use C.29 for an unresolved mathematical correspondence or transfer question, and E.17/E.24.PUB for rendering or publication. These conditions preserve the source terms without merging the mapping, its product and the described organization.

A.22:4.1d - Transformation-flow structure network profile

Use E.18.NET when one engineering use selects two or more independently identified transformation-flow structures, or nested networks of them, together with obtaining relations across their boundaries. Apply the four A.22 discriminators: the TFS or nested-network members are the constituents; the cross-member relation occurrences satisfy their defining predicates and identity rules; the applied endpoint, boundary-exposure, and acyclic direct-member constraints are selected under E.18.NET; and the named network-use frame states the practical question, admissible action, and stop or return condition.

Any optional explanatory overread follows F.19:4 and remains outside structure identity. The return condition reopens selection when a member, relation, constraint, or use-frame value changes and is not a fifth identity discriminator. The result is one dependent, non-agentive U.Structure specialization. E.18.NET defines the network’s detailed identity, reference, recursion, local-state, and conformance rules; A.22 does not copy those fields.

Use the first discriminator to record structure constituents. Introduce a separately re-identifiable world-side membership relation only when a receiving use needs it and can supply its participants, obtaining predicate, and identity rule.

A.22:4.9 - Resolve a reference to one selected structure

Use SelectedStructureReference when a description, view, transformation account, or architecture claim must refer to the same selected structure. It is a bounded C.3 kind of reference values and an A.6.5 RefKind for this use, not another durable public U-kind. Its target range is the U.Structure individuals identified in :4.1.

A candidate reference value is interpreted as <R, d>: one effective reference scheme and one designation value identified under that scheme. R supplies designation equality and the resolution Method. Designation d includes every registry snapshot/version, temporal qualifier or other input that selects its target under R. A time of inspection or freshness observation that does not select the target remains an evaluation condition. Successful resolutions of one fixed <R,d> must identify the same S; using a lookup basis that selects another target requires an explicit change to d or R.

The reference value remains the same when both components remain the same under those rules. Different reference values can resolve to the same structure; identical printed tokens under different schemes need not. A carrier, description episteme, diagram, or the structure itself is outside this reference-value domain.

The membership criterion requires R to resolve d to exactly one independently identified structure S with all four :4.1 discriminators. The receiving use fixes the declaration edition and C.3.2 judgment slice with explicit versions and a temporal selector. It evaluates resolution using the target-selecting pins already fixed in d under R; a time-independent resolution states that condition. A new assessment can leave the same reference unresolved when its fixed resolution grounds are unavailable, without selecting another target.

For an admissible reference candidate, established unique resolution to S satisfies the criterion; a completed resolution to no target, several targets, or an object outside the target range fails it. An unavailable resolution dependency or unsettled target identity leaves the judgment unknown. An uninterpretable candidate or an inapplicable slice is not-applicable under C.3.2.

In every case without established unique resolution, the structure-dependent use remains unresolved; no negative claim about a purported structure follows. The kind continues while this candidate interpretation and membership distinction remain unchanged.

A returned document can help recover S, but the reader must recover the structure it describes rather than use the document as S. Resolve the four discriminators before testing any additional receiving condition, such as model-use or transformation-flow specialization. Reference membership establishes neither that specialization nor a description, viewpoint, architecture, or reliance relation. A proposal lacking established structure identity remains proposal content under C.2.1.

Retargeting explicitly selects a new <R,d> by changing R or a target-selecting component of d, then repeats resolution and the affected receiving tests. A path whose current content describes a different organization cannot replace S. Preserve the earlier target and dependent conclusions; reopen only uses whose target or required basis changed. A changed carrier or notation can preserve both reference and target when R retains their meanings.

For example, two drawings can designate one pump-flow structure with the same constituents, obtaining connections, applied constraints and use frame. They may use different reference values while resolving to that same S. A new drawing that proposes a replacement connection is proposal content until its required structure basis is established; retaining the old file path does not retarget the earlier reference or make the proposed connection obtain. For a registry reference with d=(CoolingFlow, registry@v1, t1), choosing the same printed path under registry@v2 and t2 changes d and requires explicit selection of that new reference. If the v1 snapshot becomes unavailable, the earlier reference remains the same and its resolution judgment becomes unknown; v2 does not supply a replacement target for it.

A.22:4.2 - Structure claim reliance relation selection

When a structure claim relies on something beyond the selected structure, identify the reliance relation and apply the definition or test that supplies its participants and conditions. Use that definition for the relation’s required fields and use limits.

Reliance relation kindWhat is namedDefinition or test to apply
Source-description relationsource episteme, source view, publication form or rendering where relevant, described structure or structure claim, source-basis pins or structure-use return condition, admissible use, and any grounded non-admissible useA.7 when nearby objects need distinguishing; C.2.1 and E.10.D2 for the episteme and describing use; E.17.0 for claimed view membership; A.6.3 for a source-to-receiving construction; E.17 for a source-backed reader face; E.24.PUB and local rules for publication
Base-dependence or basednessdependent and base, named direct predicate, and an optional C.2.1 assertion episteme; scope, time and evidence only when the relation or receiving use needs them; admissible use and any needed return conditionA.6.6 for direct-relation recovery and optional assertion content; the subject-specific relation pattern supplies participant meanings, applicability, obtaining predicate and any needed occurrence identity
EntityOfConcern or empirical groundingclaim-bearing episteme, its EntityOfConcern, and effective ReferenceScheme; when empirical grounding is claimed, the grounding holon, covered claim subgraph, and obtaining C.2.1 EpistemeEmpiricalGroundingRelation; claim scope, optional model-use structure, describing-use viewpoint, reference plane, and observation or witness condition only when currentC.2.1, A.2.6, A.1.1, E.17.0, A.6.4, A.6.3.RT, and A.6.6 only for a separate base-dependence claim
Evidence or witness reliancethe evidence-use relation and target claim; provenance, witness publication or observation record, time and currentness when the receiving use needs them; if an evidence graph is current, its graph path remains a mathematical or provenance expression rather than an action routeA.2.4 for evidence-use classification; A.10 when provenance or bounded reliance must remain recoverable; G.6 when a citable evidence-provenance path is needed
Mathematical-lens reliancethe mathematical object and its correspondence to the named subject, the structure preserved or lost, and the use and stop conditions needed by the receiving claim; when C.29 is applied, retain its result and any output reference required by the receiving useC.29 when mathematical representation choice, transfer, or reliance remains unresolved; C.26 only when a residual contextual-model obstruction calls for its quantum-like lens; F.9 only for separately needed cross-context semantic correspondence; the named mathematical-lens pattern for its claims
Simulation, generated representation, model, or extracted tracesource episteme and publication when source availability matters, representation or extraction method, validation boundary, preserved structure, lost structure, and any structure-use return condition required by §4.5C.29 when a mathematical representation-choice, transfer, or reliance question remains unresolved; E.10.D2 and E.17.0 for description and view claims; E.17 and E.24.PUB for publication; C.2.1 only for episteme identity or a claimed empirical-grounding relation; A.10 for evidence; or the pattern that defines or tests the simulation, extraction, or validation claim

If the required reliance relation remains unestablished, retain the usable source description or recognition cue with that limit. Do not create a generic reliance record to make the claim look resolved.

U.Structure does not carry description, representation, extraction, mathematical-lens, simulation, or generic reliance state as an internal structure field. Those are source-description, source-use, base-dependence, evidence, lens, extraction, simulation, or publication relations about a structure. PublicationRef is not an admissible substitute for the source episteme, source view, evidence relation, direct-relation assertion, or lens output.

A.22:4.3 - Structural descriptions and views

Structural descriptions use C.2.1 episteme identity; claimed view membership uses E.17.0. Every record whose name ends in Description@Context here designates an existing U.Episteme: C.2.1 supplies its identity and E.10.D2 constrains its describing use. Every record whose name ends in View@Context remains that same episteme and has U.View membership only when the E.17.0 conformance test to a viewpoint episteme passes. A.6.3 supplies only an optional source-to-receiving construction. The @Context suffix is a local retrieval convention; it does not add a context object or identity field.

In the description and view forms below, admissibleUse states the use and its limits. nonAdmissibleUse?, also named groundedNonAdmissibleUse?, carries one optional explanatory guard under F.19:4’s plausible-reader test; the two names do not introduce separate fields.

StructuralDescription@Context ::= {
  descriptionId,
  entityOfConcernRef,
  effectiveReferenceScheme,
  selectedViewpointRef?,
  selectedModelUseStructureRef?,
  structureRefs: FinSet(SelectedStructureReference),
  structureClaimRelianceRefs?: FinSet(EvidenceRelationRef | EvidenceProvenanceRelationRef | MathLensUseOutputRef | StructureUseReturnConditionRef | U.EpistemeRef),
  describingEpistemeRef,
  admissibleUse,
  nonAdmissibleUse?
}

StructuralView@Context ::= {
  viewId,
  entityOfConcernRef,
  effectiveReferenceScheme,
  selectedViewpointRef?,
  selectedModelUseStructureRef?,
  structureRefs: FinSet(SelectedStructureReference),
  structuralAspectDescriptionRefs?,
  selectedRelationsOrOperations,
  hiddenOrLostStructure,
  admissibleUse,
  nonAdmissibleUse?
}

The EntityOfConcern and effective scheme identify the episteme with its claim content under C.2.1. selectedViewpointRef, when present, records that this named describing use selects viewpoint P; it does not establish conformance or U.View membership.

selectedModelUseStructureRef, when present, resolves one independently selected BoundedModelUseStructure used by the receiving assertion or calculation; it is neither episteme identity nor another viewpoint field.

When reliance is on a named claim, U.EpistemeRef resolves the C.2.1 claim-bearing episteme; a PatternID normally locates the definition, constraint, or test it uses, and a ClaimGraph is added only when that identity changes the use.

A.22:4.3a - Orientation belongs to a representation of a named structure

Use vertical, horizontal, above, below, or at the same level as structural shorthand only when the reader can recover which object’s structure is represented, which relation is shown, and how the drawing or ordering convention represents it. These words can make an explanation easier to follow. Their useful content comes from the named structure and convention.

For example, a diagram of a Method’s composition may place encompassing Methods above their constituents and draw each established methodPartOf connection upward. A diagram of result use may place a supplying Method to the left of a receiving Method. The second diagram needs to state what result is used and under what conditions; its horizontal arrow supplies no parthood claim. Rotating either diagram changes its orientation, not those relations. Conversely, two boxes at the same height need not denote peers, independent participants, objects of one kind, or simultaneous work.

Recover the relation before choosing an axis:

Represented subject and questionWhat gives the orientation meaning
A System or Method and its constituentsThe whole–part relation and its independently established participants; nesting or height alone supplies neither.
Kinds, concepts, or Methods ordered by generalityThe declared classification, inclusion, subsumption, or refinement relation and its direction. This is a different structure from composition.
Actions, result uses, or possible continuationsThe named order, dependency, guard, overlap, or return relation. Several relation kinds may require different arrow labels in one picture.
Systems, resources, or performed work in spaceTheir placement, adjacency, or spatial relation in the stated reference frame. Literal vertical and horizontal directions remain spatial claims about these participants.

A holon can participate in several structures, each with its relevant relations and constraints. A family of holons drawn as a hierarchy need not be one tree. Calling a representation a lattice requires the mathematical claim used: a specified order, the requisite meets and joins, and a justified correspondence to the represented subject. Use C.29 when a mathematical representation-choice, transfer, or reliance question remains unresolved. A branching picture or the presence of several encompassing wholes establishes none of these properties.

For a first explanation, a sentence such as “in this diagram of Method composition, upward arrows connect a constituent to its encompassing Method” is sufficient when the relations are already clear. Add a separate structure, view, or mathematical account only when the intended use needs it. C.30.ASV:4.5a develops the selection of structures for Methods; C.30.STRAT recovers an unresolved architecture label.

A.22:4.4 - Extracted and transformed structural views

Recover the extraction or transformation basis when a view of structure is obtained from a corpus, trace, model, simulation, or generated representation, through a mathematical lens or coarsening pass, or within an observer or budget boundary, and may hide distinctions.

ExtractedStructuralView@Context ::= {
  extractedViewId,
  entityOfConcernRef,
  effectiveReferenceScheme,
  selectedViewpointRef?,
  selectedModelUseStructureRef?,
  sourceCorpusOrTraceRefs,
  structureRefs: FinSet(SelectedStructureReference),
  extractionDescriptionRef,
  preservedStructure,
  lostStructure,
  validationBoundary,
  structureUseReturnCondition?,
  admissibleUse,
  nonAdmissibleUse?
}

StructureExtractionDescription@Context ::= {
  extractionDescriptionId,
  entityOfConcernRef,
  effectiveReferenceScheme,
  selectedViewpointRef?,
  selectedModelUseStructureRef?,
  sourceInputKind,
  lensOrMethodRef,
  budgetOrObserverBoundary?,
  preservedStructureKinds,
  lostStructureKinds,
  validationBoundary,
  structureUseReturnCondition?,
  admissibleUse,
  nonAdmissibleUse?
}

StructuralAspectDescription@Context ::= {
  aspectDescriptionId,
  entityOfConcernRef,
  effectiveReferenceScheme,
  selectedViewpointRef?,
  selectedModelUseStructureRef?,
  aspectKindRef,
  structureRefs: FinSet(SelectedStructureReference),
  structureClaimRelianceRefs?: FinSet(EvidenceRelationRef | EvidenceProvenanceRelationRef | MathLensUseOutputRef | StructureUseReturnConditionRef | U.EpistemeRef),
  admissibleUse,
  nonAdmissibleUse?
}

StructuralCoarseningDescription@Context ::= {
  coarseningDescriptionId,
  entityOfConcernRef,
  effectiveReferenceScheme,
  selectedViewpointRef?,
  selectedModelUseStructureRef?,
  sourceStructureRefs: FinSet(SelectedStructureReference),
  resultStructureRefs: FinSet(SelectedStructureReference),
  preservedUnder,
  brokenBy,
  lostStructure,
  structureUseReturnCondition?,
  admissibleUse,
  nonAdmissibleUse?
}

A.22:4.5 - Structure-use return

StructureUseReturnCondition states when to return to the fuller basis because an extracted, coarsened or reused account hides a distinction needed by the receiving action or judgement. Name the hidden distinction, the use that needs it, and the condition that requires returning before that use proceeds.

Do not make structure-use return mandatory for ordinary local recognition when no hidden distinction is being used for action.

A.22:4.6 - Relation to architecture

StructuralAspectDescription@Context describes one selected structural aspect under A.22. It is not an ArchitectureStructureKindRef by itself. ArchitectureStructuralView@Context is a C.30.ASV view over the architecture claim or selected architecture-relevant structures. An asserted architecture relation is an independently obtaining C.30 ArchitectureRelation between a holon and a selected structure.

A.22 is upstream of C.30. Architecture uses structure; structure does not import architecture as a parent.

C.30 uses A.22 to identify one selected architecture-relevant structure, then tests the ArchitectureRelation between that structure and one holon. C.30.ASV separately defines and tests an architecture structural view. A reference from an architecture description establishes neither the relation nor view conformance.

C.30 and its subpatterns supply the architecture-specific description, view and adequacy rules. Select the one that defines or tests the architecture claim.

A.22:4.7 - Boundary and repair table

Tempting collapseA.22 repair
The reliance relation is treated as the structure.Recover the constituents, selected obtaining relation occurrences, applied constraints, and named use frame. When a neighboring source-description, source-use, base-dependence, grounding, evidence, lens, simulation, extraction, or representation reliance claim is current, name that relation and the content that defines or tests it separately.
The diagram, graph, table, dashboard, or publication form is the structure.Recover the description or view and its publication occurrence, form, or carrier when relevant. If the account claims a source-description, base-dependence, grounding, evidence, lens, simulation, extraction, or representation relation, identify and test that relation separately.
A transformation-flow graph expression is the structure in every sense.Use E.18 for one selected TFS and its internal paths, crossings, and valuations; use E.18.NET for a selected network of independently identified TFS members and cross-member relations; use E.18.2 for the graph expression and C.29 only when a mathematical representation-choice, transfer, or reliance question remains unresolved. A.22 supplies only the selected-structure identity, and C.30.TFS-REL defines and tests the architecture-to-transformation-flow relation claim.
A mathematical lens output is the structure.Use C.29 for lens-use result and admissibility, and cite MathLensUseOutputRef only through C.29 lens-use result, preserved structure, lost structure, and stop-condition discipline.
A structure is cited as sufficient basis for evidence reliance, assurance, safety, causality, or gate passage.Use A.10 for claim-bound evidence reliance, G.6 when a citable evidence-provenance path is needed, B.3 for a named assurance claim, the safety pattern for safety, C.28 for causal use, A.20 for internal-constraint validity, and A.21 for a gate decision.
A structure is a decision or work record.Use C.11 or the project-side decision pattern for the decision, A.15 for the work-family object, and C.2.1 for an episteme describing it. A.20 or A.21 applies only when an internal-constraint result or gate decision is at issue.
Architecture is treated as identical to a selected structure.Use C.30 to test the ArchitectureRelation between the holon and selected structure. Recover the architecture claim and any description or view separately.
Function, module, interface, platform, layer, stack, block, expert, cache, router, or gate becomes a root kind by appearing in structure prose.Use C.30.STRAT for an ambiguous source label, then the definition or test required by the recovered claim: A.6.F for function, A.6.M for a module-interface relation, A.6.0 for a signature, A.6.5 for relation slots, A.6.B for boundary norms, A.6.C for contract unpacking, A.6.P:4.11a for service or access wording, E.18 for transformation-flow structure, or C.30.ASV for an architecture structural view. Apply any other pattern only for the claim it defines or tests.

A.22:4.8 - Worked slices

Maintenance-isolation structure selection. In this constructed case, a planner chooses which relations matter for planning pump-skid isolation. Under the project’s independently tested installation predicates, Motor_12 drives Pump_37, Bus_7 supplies Motor_12, and Valve_In_4 and Valve_Out_4 lie on the inlet and outlet material paths of Pump_37. Assume these are the complete live energy and material paths for this illustration.

named selection use: choose isolation points before Pump_37 maintenance
constituents: independently identified Pump_37, Motor_12, Valve_In_4, Valve_Out_4, and Bus_7
selected obtaining relations: the established drive, supply, inlet-path, and outlet-path occurrences with the participants named above
applied constraints: isolate every live energy and material path to Pump_37; retain only relations relevant to this isolation use
selecting system: MaintenancePlanner_A
selection method: IsolationStructureSelectionMethod
selected structure: Pump37_MaintenanceIsolationStructure
admissible action: prepare the isolation sequence from the selected paths
stop: reopen selection when a constituent, selected occurrence, or isolation constraint changes

Pump37_MaintenanceIsolationStructure is identified by the constituents, selected obtaining occurrences, applied isolation constraints, and maintenance-isolation use frame. The selection method and any C.2.1 episteme describing the judgment remain separate.

The selected organization directs planning to Bus_7 and both material-path valves; it establishes no completed isolation. If the completeness assumption fails, return to path identification before planning from this selection.

A C.29 graph may represent the same organization, while the predicates of the selected relation occurrences remain its obtaining basis. A visually identical graph with an unestablished connection remains a representation candidate.

Architecture kernel slice. A team says, “the architecture is the graph.” Recover the selected structure and the graph’s reliance relation:

declaredStructureSubstrateRef: TransformationFlowStructureRef under E.18, with mathematical graph description under E.18.2 when that expression is the current claim
candidate structure: selected transformation-flow structure
structure-claim reliance relation: selected relation record named by value(
  sourceDescriptionOrPatternApplicationRef = SourceViewRef, structure or crossing record selected under E.18, or E.18.2 mathematical graph description,
  relationContribution = E.18 selected-structure or crossing definition | A.6.6 base-dependence test | independently established support relation recovered through A.10 provenance and bounded-use account | C.29 mathematical-lens result, chosen for the claim being made,
  relationKind = source-description | base-dependence | evidence | lens, selected for this reliance,
  validationBoundary = graph-path currentness boundary, slice currentness boundary, or crossing currentness boundary
)
next FPF pattern application: C.30.TFS-REL when this selected structure is used in an architecture-to-transformation-flow relation
stop or return condition: stop at the selected reliance relation's result; for a Work, evidence, gate, or decision claim, apply its test in A.22:4.7
non-admissible use: the graph as the whole architecture

The practitioner can now use the graph through the selected source-description, base-dependence, evidence, or lens relation and route the architecture claim to C.30.TFS-REL.

Extracted code structure slice. A code-agent relation graph or probe JSON reports imports, calls, registry wiring and data-flow links. Recover the source codebase or publication, extraction method, preserved and lost structure, validation boundary and structure-use return condition. That establishes the declared extraction result only. For an A.6.3 epistemic-viewing claim, identify source episteme X and receiving episteme Y, their same EntityOfConcern, and the projected or re-expressed ClaimGraph and ReferenceScheme. Qualify Y as a U.View only when the applicable E.17.0 viewpoint conformance independently obtains. A claim about the codebase architecture, internal agent belief, assurance or release readiness still needs its evidence and governing predicate.

ExtractedStructuralView@Context:
  sourceCorpusOrTraceRefs: repo snapshot, probe outputs, traces
  preservedStructure: selected typed relation families
  lostStructure: unexplored regions, dynamic calls, hidden generated code, ambiguous relation kinds
  validationBoundary: probe coverage and source codebase or publication edition
  structureUseReturnCondition: when an architecture decision, assurance use, or repair depends on a relation not observed by the extraction