Jump to text
On this page
Copy and source
Published source confirmed at last check

Source changed 2026-11-18 21:11:39 UTC · snapshot created 2026-11-18 21:12:35 UTC · last check 2026-11-18 22:25:20 UTC

MDPE.3 - Configure and Coordinate a Music-or-Dance Performing Whole

Status: Stable

Pattern type: Music-and-Dance performing-configuration pattern

Public result: an account of an existing or past performing configuration, a proposed arrangement, or a finding about its coordination, readiness or an unresolved condition

MDPE.3:0 - Use This When

Use this method to identify how a particular music or dance performance was organized, design a configuration for a proposed performance, or assess whether its participants and means can coordinate. A successful joint performance, a design on paper or a mismatch among individually capable performers can each supply the starting point.

A partner cue can be unreadable, a response delayed, a connector incompatible or authority to change a system missing. Each contribution can work on its own while the combination falls short. A score or stage plan can establish the intended arrangement. To explain what happened, use evidence of the setup and its operation.

Identify the performing whole, its essential relations and the conditions that must hold together for the particular work. The result can be an account of the setup that was used, a design with its conditions, or a finding about how it coordinated. Where a needed part, permission, capability or safe test condition is missing, identify what this prevents. Consider a further check when an attainable result could settle a consequential question at a worthwhile cost.

Use ensemble, partnering, staging, instrument-setup, control, rehearsal, venue or Systems Engineering methods for the results they supply. MDPE.3 connects those results around the simultaneous work of the performers, including timing, material, partner relations and recovery. Use a complete existing account or a direct field method when it already answers the question.

MDPE.3:1 - The Recurring Difficulty

A music or dance project can improve its parts separately and discover an incompatibility only when they are brought together. A dancer knows a figure but cannot lead it through the intended contact. A musician can play a part but cannot hear the cue in the venue. A model produces material faster than the performer-facing control can expose it. A robot reaches the notes but its actuation noise, latency, gesture, or recovery changes the musical relation. A prosthesis increases striking speed while moving control away from the musician. A stage plot lists equipment without saying who senses which state or how a failure is corrected.

Some descriptions and claims can obscure whether the performing arrangement works.

  • a diagram line is called an interface without naming the connector, signal, protocol description, or actual interaction;
  • a score or count is treated as coordination rather than a description used by performers;
  • a performer label is treated as an obtaining assignment and sufficient capability evidence;
  • a component test is treated as evidence that the whole can perform;
  • a proposed configuration is written as though its Systems and relations already obtain.

Select the smallest performing whole whose construction and coordination support the claim. Establish constituents from the relations that actually compose the whole, or specify the required composition for a design. Identify venues, services, archives, audiences, platforms and other participants separately where they supply an external condition or receive the performance.

Several relations can operate at once. During partnered dance, bodily control, weight transfer, partner communication, figure execution, musical timing, floor navigation and social participation can matter at different scales in one passage. Rehearsal can address them in sequence. Use their simultaneous organization to understand the joint performance. Use constructive relations to establish which participants belong to the performing whole.

MDPE.3:2 - Solution

For the named performance or family of work, establish the configuration and its coordination to the extent the question requires. Use available system or music-and-dance results where they answer the question. When further work is needed, use Systems Engineering for boundaries, architecture, realization or assurance and a field method for the relevant interaction. A plan specifies a possible arrangement. A historical account identifies the arrangement and work supported by the evidence.

MDPE.3:2.1 - Identify the material, performance and use

Identify the material, performance, receiving use and conditions. If an assumption matters to a proposed configuration, say what depends on it. For a past performance, establish the relevant conditions from the evidence available for that occurrence.

Identify the concrete use, such as a social-dance phrase, concert set, improvisation constraint, installation interaction, recording occurrence or rehearsal family.

MDPE.9 can supply candidate material and MDPE.10 a capability finding. To identify the performing whole and its coordination, establish how the material and capabilities are joined in the particular configuration.

MDPE.3:2.2 - Choose the performing boundary

For the work in question, select the minimum performing configuration sufficient for the claim. For an existing whole, establish its actual construction, coordination and identity. For a design, specify the required relations and any conditions for realizing them. Identify the following as applicable.

  • the proposed, available or past performing whole relevant to the work,
  • its constituents and the part relations required in a design or actually obtaining for an existing whole,
  • external participants and their interactions or enabling relations,
  • the material and conditions the work uses, including scores, prompts, choreography, props, space, energy and network access. Establish any claimed part relation separately, and
  • the relevant interval, conditions and configuration.

For an existing whole, include a component or material portion as a constituent when its kind and its actual part relation support that claim. A constituent need not itself be a System. Exchanging signals, sharing a diagram or using the same resource may instead establish an external relation.

A pair can be the relevant whole for joint cueing, an equipped performer for a particular instrument or prosthesis, or an ensemble for joint timing and delivery. For generated material, establish what the model supplied. If a performance is proposed, identify the intended performer. If it took place, use evidence of who or what performed it.

Use the general holon and Systems Engineering criteria when determining whether these relations constitute the proposed whole or an acting system. A group name alone can locate the question.

MDPE.3:2.3 - Choose views for the performance question

Choose the views that reveal a relation needed to describe, design or assess the configuration.

ConcernWhat to make visible
Functional contributionWho or what produces sound or movement, senses timing, supports weight, generates material, cues another performer, presents the result, or recovers from failure.
Construction and physical connectionBodies, instruments, devices, effectors, props, connectors, rooms, floors, wearables, and the physical relations specified for a proposed setup or established for an existing one.
Timing and rhythmContinuing carriers, discrete events, anticipated or perceived centres, timing tolerances, cue relations, and recovery after drift.
Sensing, control, and feedbackWhat state each performer or controller can sense, which action it can change, what feedback returns, and who corrects failure.
Placement, access, and safetySpatial reach, visibility, audibility, movement paths, audience and performer access, collision, load, fatigue, and exit.
Participation and decision rightsWho performs, leads, follows, conducts, controls, authorizes, refuses, interrupts, or changes the Method.
Material and description useHow scores, choreography, recordings, prompts, generated material, rule cards, and cue sheets enter Work without becoming performers.

Where several views concern the same performing arrangement, identify the corresponding participants and relations needed for the question. One view may organize functions, another physical links or mutual cues. A configuration drawing can settle what it specifies. Use evidence of the actual setup for the claim that the parts and interactions were in place.

MDPE.3:2.4 - Name load-bearing relations and interfaces

For a relation essential to this work, identify the participants, direction or reciprocity, relevant conditions and consequence. Examples include partner contact and weight exchange, a cue between musicians, an audio signal, a control display, an actuator command, a sensing relation, audibility at a particular position or access to an emergency stop. Use the observation or design constraint that bears on the actual claim.

When “interface” leaves the needed relation unclear, identify the connector or boundary, functional port, protocol or API description, signal or interaction that is meant. Common use of the word does not establish that a diagrammed connection already carries a signal.

A score can establish prescribed timing, a rule card the contact it prescribes and a protocol the required messages. To report actual use, determine from appropriate evidence what the performers or devices did in the occurrence and which relations obtained. An existing record can establish it.

MDPE.3:2.5 - Ground timing in processes and events

Identify the timing process and event relevant to the question. A notation or timestamp can establish a specified landmark. A claim about joint performance or a perceived cue may require different evidence.

In Balboa, continuing floor contact and movement can carry time. A pressure change, direction change or weight arrival can articulate it. Foot contact, acoustic onset, intended beat and the event a partner can use may occur at different times. In music, a physical attack, sound onset, perceived beat centre, gesture and software timestamp may likewise differ.

Select the observation for the timing relation at issue. A waveform with a known time reference can locate an acoustic onset at the recorded point. To establish when a partner could use a weight cue, look for evidence of that cue under the conditions of the interaction.

MDPE.3:2.6 - Establish coordination and examine an unresolved relation

If the work includes realizing a performing arrangement, choose the direct setup, fitting, calibration, rehearsal, cue design, control, safety or access work it requires. To assess a design or a past performance, use the appropriate existing specification, observation or operating record.

If an important joint relation remains in question, use any adequate existing finding or compare the likely results and full costs of feasible checks. A partnered phrase can test a cue, a rehearsal excerpt can expose latency and recovery, a venue check can establish audibility or sightlines, and a robot test can reveal noise or control delay. When an important uncertainty cannot be resolved on acceptable terms, state what the design or earlier evidence establishes and where the answer stops.

Where recovery matters, state who or what can detect the deviation, the corrective action and the condition for stopping safely. To report an actual correction or stop, establish that it occurred.

MDPE.3:3 - First Useful Result

Give the configuration and its relied-on conditions. Include the entries below when they help answer the receiving question.

  • Music-or-Dance Work: [selected material, occurrence or Work family, and receiving use].
  • Performing whole. Identify the observed or proposed configuration and the construction and coordination on which the claim depends.
  • Constituents. Identify the entities and their actual kinds. Specify the part relations that obtained in an existing setup or are required for the proposed one.
  • External enablers and interactions: [participants, conditions and direct relations outside the whole].
  • Material and descriptions. Identify the score, prompt, recording or rule used or proposed for use, as applicable.
  • Selected views: [only the functional, physical, timing, control, placement, participation, or material views needed].
  • Load-bearing relations: [participants, conditions, timing, control, and correction].
  • Capabilities and assignments. Identify those relied on at the time and under the conditions in question.
  • Coordination evidence, where needed. What existing observations establish the relevant joint work? If a further test is proposed, identify its purpose and the conditions for carrying it out.
  • Unresolved dependency, if any. What required component, relation, capability, authority, evidence or safe condition is missing, and which conclusion does this affect?
  • Fallback or stop. Describe the required or observed correction, recovery, refusal or safe stop where it matters.
  • Reassessment, where needed. What change of material, performer, relation, venue, configuration or evidence would affect reliance on this result?

MDPE.3:4 - Worked Cases

MDPE.3:4.1 - Balboa pair, carrier, and readable event

For a partnered phrase, identify the pair and the joint contact, bodily support and continuing movement central to its timing. A pressure or direction change or weight arrival may articulate the time. Use evidence of the partner’s access and response to identify when the weight event was usable. Foot contact or a count can settle the time of a different event.

A suitable record of a partnered phrase can show whether the continuous movement persisted, the partner used the cue and the pair recovered after redirection. If this remains an important open question, consider a short trial with the relevant tempo, pair and contact conditions.

Where the phrase also needs variable free-foot accents, identify the continuing support, foot articulation and the intended change of supporting leg. Compare pulse regularity, accent placement and readable weight arrival. MDPE.11:4.5.2 explains how those contributions work together. For a claim about the actual pair, use evidence of their joint execution.

MDPE.3:4.2 - Shimon, marimba, control, gesture, and people

For the documented robot-only marimba event, Shimon is the performer. Generation software, control, actuation, marimba, seed, room and human engineering work contribute differently. Identify their actual relations to the particular setup. The project’s human team chose later development work. That responsibility does not make the team a constituent performer of each robot performance.

The actuator studies concern speed, dynamics, noise and strike control. The head and arm gesture studies investigate interaction, attention and synchronization with human musicians, including how they interpreted the robot’s cues. Attribute each result to its tested configuration and conditions.

MDPE.3:4.3 - Jason Barnes as an equipped performer

For the named drumming work, Barnes with a configured prosthesis can be the performing whole. Identify Barnes, device, sensing, controller for the autonomous stick, drum kit and audio input, along with their actual part or external interaction relations. An account of shared control may need the particular sensing and audio response, actuation, stick-to-drum contact, correction, stop and redirection.

Evidence about the equipped performance supplies a result that Barnes’s prior musicianship and a device description alone leave open. The later finger-control and piano work used another configuration. Reconsider each claim whose holder, connection, control, material or receiving conditions changed.

MDPE.3:4.4 - Separate performing arrangements in The Call

The project links a songbook, exercises, choirs, a recording protocol, datasets, choral models, a spatial-audio installation and an experiment with a data trust. These belong to different working arrangements.

For a choir recording, identify the singers, material, protocol, space and recording work. For the installation, identify the model execution, spatial sound, visitor controls, signals, responses and venue. Project membership can connect the two accounts. To identify a constituent in either performing arrangement, establish the part relation through which it helped constitute that arrangement.

MDPE.3:4.5 - JIZAI ARMS before a Dance claim

JIZAI ARMS supplied prototypes of a wearable body system and observations of embodied role-play. Those results can answer questions about design and interaction. Whether the apparatus formed a performing whole for a particular dance depends on that work and the evidence for its configuration.

For a dance application, specify the work and identify the required wearer, wearable base, arms, sensing, control, space, timing, safety, correction and recovery. Include a partner or ensemble when the work calls for them. A design can specify the intended configuration. To claim that it performed, examine the actual setup and its performance or state what that evidence leaves unknown.

MDPE.3:4.6 - Direct-Method stop

A solo musician already has the instrument, room, material, monitor, permissions and fallback needed for the proposed performance. An earlier setup check or a suitable field service establishes the configuration and coordination relevant to the decision. The musician can use it directly.

MDPE.3:4.7 - Antiphonal ensemble: cue, late response and acoustic recovery

In the constructed MDPE-PERFORM case, a singer, clarinettist, cellist and electronics performer are preparing an antiphonal passage at 96 beats per minute. Each can perform the assigned part. Sometimes the generated answer arrives after the intended response begins. The group needs to arrange the next studio rehearsal of this passage. Readiness for a full concert is a separate question.

For this joint timing question, the four performers, their configured instruments and the electronic rig form the ensemble through their agreed call, cues, monitoring and response. The room and mains supply provide external conditions. The later audience and the playback system through which it hears the work are relevant to presentation. The score and sound files supply material. A different room or score can change the required interactions without becoming a constituent of the ensemble.

The score gives the singer a four-beat call and the ensemble the following four-beat answer. The protected musical result is a clearly heard exchange with the singer’s breathing space intact. Merely delaying the entire answer until generation finishes destroys that relation. The group compares preparing all electronic answers in advance with retaining live generation and providing a timely acoustic answer when needed. It chooses the second arrangement for this passage because live variation remains useful and the acoustic answer is already performable. The first remains a simpler alternative if live variation ceases to warrant the complexity.

The group realizes these relations through rehearsal and the electronics performer’s available queue, gate and mute controls:

Participant and relationAgreed cue, action or correction
Singer to electronics performerThe agreed breath/hand cue at the start of the call initiates generation; the performer watches that cue and monitors the response buffer.
Electronics performer to clarinettist and cellistBefore the final beat of the call, the performer gives the agreed visible ready sign only if the response is queued. Everyone can see that sign from the selected positions.
Downbeat responseA response signalled ready by the cutoff is released on the answer downbeat. Without the ready sign by the cutoff, the clarinettist starts the prepared acoustic answer and the cellist supports it.
Late-generation recoveryIf the cutoff is missed, the electronics performer keeps the generated answer muted for the whole exchange, even if it becomes ready meanwhile. Discard or retain it for another use, then rearm generation for the next call.
Lost common cueIf the performers cannot agree which exchange is current or cannot hear one another, they stop at the agreed break and reset together; guessing does not count as successful recovery.

The stipulated trial contains four ordinary exchanges and two deliberately late generations. With the given placement and monitor mix the performers hear the call. The ready sign is visible when given. All four ordinary answers enter on the intended downbeat. In both late cases the acoustic answer enters there, the late electronic sound stays muted, the singer retains the scored breathing space and the next call starts together.

The ensemble retains the cue, cutoff, mute, acoustic answer and placement for the next rehearsal of this passage. The six observed exchanges also answer the historical question of how recovery worked under that setup. For a concert, audibility for the audience, the longer set and a new venue remain untested by these six exchanges. Use an existing assessment or obtain the needed evidence through MDPE.5. If changed placement hides the sign, reassess its visibility and the affected joint entry, retaining the usable score and acoustic answer. If the clarinettist lacks the required technique despite an adequate cue, use MDPE.10 for the capability question.

MDPE.3:5 - Checks and Common Repairs

CheckFailure it preventsRepair
Performing work and boundaryA broad project label is treated as one performing System.Name the occurrence or work family and identify the whole that supplied the relevant joint performance, or specify the organization required in a design.
Constituents and external enablers stay distinctEvery venue, service, audience, or platform becomes a part.For an existing setup, identify the established part relations. For a design, specify the required composition. Identify external interactions in either case.
Views fit their questionsFunction, construction, timing, control and placement are forced into the same hierarchy.Use a view for each relevant relation and establish correspondences where the claim depends on them.
Configuration and descriptionA score, stage plot or approval is treated as proof of an operating arrangement.State what the description specifies. For an actual realization, identify the participating resources, obtaining relations and their evidence.
Interface wording is recoveredA line or noun hides the load-bearing relation.Identify the connector, port, protocol description, signal, representation, or direct interaction meant.
Timing is groundedA count, timestamp or onset is used to stand for another timing relation.Identify the relevant continuing process, articulation, cue or perception and the evidence for its timing.
Joint coordinationComponent success is extended to a whole without support.Use evidence of the joint operation to report it. For a plan, state how the required relation would work. Seek a further test where it can resolve a consequential uncertainty.
Correction and safe stop are explicitReadiness assumes a perfect run.Identify the sensing, feedback, recovery, refusal or stopping conditions required for the particular work. Distinguish a planned fallback from a correction or stop that occurred.
Performing and decidingA robot, platform, controller or conductor is given decision authority solely because it produces a signal.Identify who performed the work and who held authority for the relevant choice. For an actual decision, determine what was chosen.

MDPE.3:6 - Sources and Epistemic Boundaries

Source or maintained resultContribution used hereBoundary
FPF A.1, A.22, A.6.F, A.6.M, A.6.RSIR, A.2, A.2.1, A.2.2, A.15.1, and F.6Holon and System recognition, selected structures, function, module and interface-claim recovery, assignment, capability, Work, and attribution.They do not supply Music-or-Dance material, performer, carrier, articulation, partner, ensemble, or performance use.
Develop an Engineered System’s Functional Organization and Bearer Alternatives (SYSE.5)General engineered-System functional organization, bearer, allocation, interface, feasibility, and conflict alternatives.A possible architecture is distinct from the configuration that exists; MDPE specifies the performance relations.
Timing examples in the Dance profile and the local Balboa casesContinuing carrier, discrete articulation, several event locations, pair boundary, partner feedback, and layered coordination.Method-design input, not one historical definition, universal teaching Method, or capability result.
Georgia Tech Shimon project, 2017 account, actuator study, and gesture studyRobotic generation, performance, actuation, gesture, timing, interaction, and performer/developer separation.The sources do not establish one timeless configuration, robot-held development authority, or cultural retention.
Georgia Tech Barnes prosthesis account, finger-control account, and Drumming Arm studyEquipped performer, shared control, device-to-instrument interaction, representative performance, and changing configurations.One performer/device lineage does not define every equipped performance.
Yamamura et al., JIZAI ARMSCollaborative body-system design, prototype configuration, embodied role-play, and open interaction questions.Prototype reachability does not establish Dance performance or capability.
Serpentine, The CallNamed choirs, recording protocol, datasets, models, installation, and participation arrangements.The source describes distinct performing arrangements; it supplies no universal Music Method.
Whitehead et al., interpersonal coordination in Dance improvisationMovement relation, directed influence, participant report, and other observations for human dyads.One synchrony score does not configure a pair or prescribe a partnering Method.
Abalde et al., joint music makingPrior knowledge, social relations, goals, strategies, cueing, anticipation, correction, and mutual adaptation as ensemble concerns.The research framework is not one ensemble configuration or Systems Engineering Method.

Use an applicable existing result or a direct field method if it answers the coordination question at acceptable cost.

MDPE.3:7 - Relations

  • MDPE.9 can supply material for designing or assessing the configuration, including material the existing arrangement already supports. Generating a candidate does not establish the whole.
  • MDPE.10 can supply capability evidence for one holder or configuration. Check what any joint capability finding establishes for the question. Current use and constituent relations each need evidence of the relevant operation or construction.
  • MDPE.3 uses applicable system and architecture results from SYSE.5 and other Systems Engineering patterns; the music, movement, partner, ensemble, timing, and performance specialization remains here.
  • MDPE.11 and MDPE.5 can use the configuration in later Work. Availability of the whole produces neither an interpretation nor a performance occurrence.
  • MDPE.14 can use a conflict among part relations, overlapping work, scale, constraints or representations and support a recommendation or a decision by whoever holds the relevant authority. Delivery of the chosen change requires its own work.
  • A.1 governs constructive holon and System recognition; A.22 selected structures; C.30 architecture; C.29 representation use; and the direct Method, Work, capability, assignment, evidence, and measurement patterns govern their own claims.

MDPE.3:End

Referenced in the corpus

45 literal mentions in other sections. Read their context to establish the relation.